Provided by: git-core_220.127.116.11-2_i386
gittutorial - A tutorial introduction to git (for version 1.5.1 or
This tutorial explains how to import a new project into git, make
changes to it, and share changes with other developers.
If you are instead primarily interested in using git to fetch a
project, for example, to test the latest version, you may prefer to
start with the first two chapters of The Git Userâ€â€™s Manual.
First, note that you can get documentation for a command such as git
log --graph with:
$ man git-log
$ git help log
With the latter, you can use the manual viewer of your choice; see git-
help(1) for more information.
It is a good idea to introduce yourself to git with your name and
public email address before doing any operation. The easiest way to do
$ git config --global user.name "Your Name Comes Here"
$ git config --global user.email email@example.com
IMPORTING A NEW PROJECT
Assume you have a tarball project.tar.gz with your initial work. You
can place it under git revision control as follows.
$ tar xzf project.tar.gz
$ cd project
$ git init
Git will reply
Initialized empty Git repository in .git/
Youâ€™ve now initialized the working directoryâ€”you may notice a new
directory created, named ".git".
Next, tell git to take a snapshot of the contents of all files under
the current directory (note the .), with git-add:
$ git add .
This snapshot is now stored in a temporary staging area which git calls
the "index". You can permanently store the contents of the index in the
repository with git-commit:
$ git commit
This will prompt you for a commit message. Youâ€™ve now stored the first
version of your project in git.
Modify some files, then add their updated contents to the index:
$ git add file1 file2 file3
You are now ready to commit. You can see what is about to be committed
using git-diff with the --cached option:
$ git diff --cached
(Without --cached, git-diff will show you any changes that youâ€™ve made
but not yet added to the index.) You can also get a brief summary of
the situation with git-status:
$ git status
# On branch master
# Changes to be committed:
# (use "git reset HEAD <file>..." to unstage)
# modified: file1
# modified: file2
# modified: file3
If you need to make any further adjustments, do so now, and then add
any newly modified content to the index. Finally, commit your changes
$ git commit
This will again prompt you for a message describing the change, and
then record a new version of the project.
Alternatively, instead of running git-add beforehand, you can use
$ git commit -a
which will automatically notice any modified (but not new) files, add
them to the index, and commit, all in one step.
A note on commit messages: Though not required, itâ€™s a good idea to
begin the commit message with a single short (less than 50 character)
line summarizing the change, followed by a blank line and then a more
thorough description. Tools that turn commits into email, for example,
use the first line on the Subject: line and the rest of the commit in
GIT TRACKS CONTENT NOT FILES
Many revision control systems provide an add command that tells the
system to start tracking changes to a new file. Gitâ€™s add command does
something simpler and more powerful: git-add is used both for new and
newly modified files, and in both cases it takes a snapshot of the
given files and stages that content in the index, ready for inclusion
in the next commit.
VIEWING PROJECT HISTORY
At any point you can view the history of your changes using
$ git log
If you also want to see complete diffs at each step, use
$ git log -p
Often the overview of the change is useful to get a feel of each step
$ git log --stat --summary
A single git repository can maintain multiple branches of development.
To create a new branch named "experimental", use
$ git branch experimental
If you now run
$ git branch
youâ€™ll get a list of all existing branches:
The "experimental" branch is the one you just created, and the "master"
branch is a default branch that was created for you automatically. The
asterisk marks the branch you are currently on; type
$ git checkout experimental
to switch to the experimental branch. Now edit a file, commit the
change, and switch back to the master branch:
$ git commit -a
$ git checkout master
Check that the change you made is no longer visible, since it was made
on the experimental branch and youâ€™re back on the master branch.
You can make a different change on the master branch:
$ git commit -a
at this point the two branches have diverged, with different changes
made in each. To merge the changes made in experimental into master,
$ git merge experimental
If the changes donâ€™t conflict, youâ€™re done. If there are conflicts,
markers will be left in the problematic files showing the conflict;
$ git diff
will show this. Once youâ€™ve edited the files to resolve the conflicts,
$ git commit -a
will commit the result of the merge. Finally,
will show a nice graphical representation of the resulting history.
At this point you could delete the experimental branch with
$ git branch -d experimental
This command ensures that the changes in the experimental branch are
already in the current branch.
If you develop on a branch crazy-idea, then regret it, you can always
delete the branch with
$ git branch -D crazy-idea
Branches are cheap and easy, so this is a good way to try something
USING GIT FOR COLLABORATION
Suppose that Alice has started a new project with a git repository in
/home/alice/project, and that Bob, who has a home directory on the same
machine, wants to contribute.
Bob begins with:
bob$ git clone /home/alice/project myrepo
This creates a new directory "myrepo" containing a clone of Aliceâ€™s
repository. The clone is on an equal footing with the original project,
possessing its own copy of the original projectâ€™s history.
Bob then makes some changes and commits them:
bob$ git commit -a
(repeat as necessary)
When heâ€™s ready, he tells Alice to pull changes from the repository at
/home/bob/myrepo. She does this with:
alice$ cd /home/alice/project
alice$ git pull /home/bob/myrepo master
This merges the changes from Bobâ€™s "master" branch into Aliceâ€™s current
branch. If Alice has made her own changes in the meantime, then she may
need to manually fix any conflicts.
The "pull" command thus performs two operations: it fetches changes
from a remote branch, then merges them into the current branch.
Note that in general, Alice would want her local changes committed
before initiating this "pull". If Bobâ€™s work conflicts with what Alice
did since their histories forked, Alice will use her working tree and
the index to resolve conflicts, and existing local changes will
interfere with the conflict resolution process (git will still perform
the fetch but will refuse to merge --- Alice will have to get rid of
her local changes in some way and pull again when this happens).
Alice can peek at what Bob did without merging first, using the "fetch"
command; this allows Alice to inspect what Bob did, using a special
symbol "FETCH_HEAD", in order to determine if he has anything worth
pulling, like this:
alice$ git fetch /home/bob/myrepo master
alice$ git log -p HEAD..FETCH_HEAD
This operation is safe even if Alice has uncommitted local changes. The
range notation HEAD..FETCH_HEAD" means "show everything that is
reachable from the FETCH_HEAD but exclude anything that is reachable
from HEAD. Alice already knows everything that leads to her current
state (HEAD), and reviewing what Bob has in his state (FETCH_HEAD) that
she has not seen with this command
If Alice wants to visualize what Bob did since their histories forked
she can issue the following command:
$ gitk HEAD..FETCH_HEAD
This uses the same two-dot range notation we saw earlier with git log.
Alice may want to view what both of them did since they forked. She can
use three-dot form instead of the two-dot form:
$ gitk HEAD...FETCH_HEAD
This means "show everything that is reachable from either one, but
exclude anything that is reachable from both of them".
Please note that these range notation can be used with both gitk and
After inspecting what Bob did, if there is nothing urgent, Alice may
decide to continue working without pulling from Bob. If Bobâ€™s history
does have something Alice would immediately need, Alice may choose to
stash her work-in-progress first, do a "pull", and then finally unstash
her work-in-progress on top of the resulting history.
When you are working in a small closely knit group, it is not unusual
to interact with the same repository over and over again. By defining
remote repository shorthand, you can make it easier:
alice$ git remote add bob /home/bob/myrepo
With this, Alice can perform the first part of the "pull" operation
alone using the git-fetch command without merging them with her own
alice$ git fetch bob
Unlike the longhand form, when Alice fetches from Bob using a remote
repository shorthand set up with git-remote, what was fetched is stored
in a remote tracking branch, in this case bob/master. So after this:
alice$ git log -p master..bob/master
shows a list of all the changes that Bob made since he branched from
Aliceâ€™s master branch.
After examining those changes, Alice could merge the changes into her
alice$ git merge bob/master
This merge can also be done by pulling from her own remote tracking
branch, like this:
alice$ git pull . remotes/bob/master
Note that git pull always merges into the current branch, regardless of
what else is given on the command line.
Later, Bob can update his repo with Aliceâ€™s latest changes using
bob$ git pull
Note that he doesnâ€™t need to give the path to Aliceâ€™s repository; when
Bob cloned Aliceâ€™s repository, git stored the location of her
repository in the repository configuration, and that location is used
bob$ git config --get remote.origin.url
(The complete configuration created by git-clone is visible using git
config -l, and the git-config(1) man page explains the meaning of each
Git also keeps a pristine copy of Aliceâ€™s master branch under the name
bob$ git branch -r
If Bob later decides to work from a different host, he can still
perform clones and pulls using the ssh protocol:
bob$ git clone alice.org:/home/alice/project myrepo
Alternatively, git has a native protocol, or can use rsync or http; see
git-pull(1) for details.
Git can also be used in a CVS-like mode, with a central repository that
various users push changes to; see git-push(1) and gitcvs-migration(7).
Git history is represented as a series of interrelated commits. We have
already seen that the git-log command can list those commits. Note that
first line of each git log entry also gives a name for the commit:
$ git log
Author: Junio C Hamano <firstname.lastname@example.org>
Date: Tue May 16 17:18:22 2006 -0700
merge-base: Clarify the comments on post processing.
We can give this name to git-show to see the details about this commit.
$ git show c82a22c39cbc32576f64f5c6b3f24b99ea8149c7
But there are other ways to refer to commits. You can use any initial
part of the name that is long enough to uniquely identify the commit:
$ git show c82a22c39c # the first few characters of the name are
# usually enough
$ git show HEAD # the tip of the current branch
$ git show experimental # the tip of the "experimental" branch
Every commit usually has one "parent" commit which points to the
previous state of the project:
$ git show HEAD^ # to see the parent of HEAD
$ git show HEAD^^ # to see the grandparent of HEAD
$ git show HEAD~4 # to see the great-great grandparent of HEAD
Note that merge commits may have more than one parent:
$ git show HEAD^1 # show the first parent of HEAD (same as HEAD^)
$ git show HEAD^2 # show the second parent of HEAD
You can also give commits names of your own; after running
$ git tag v2.5 1b2e1d63ff
you can refer to 1b2e1d63ff by the name "v2.5". If you intend to share
this name with other people (for example, to identify a release
version), you should create a "tag" object, and perhaps sign it; see
git-tag(1) for details.
Any git command that needs to know a commit can take any of these
names. For example:
$ git diff v2.5 HEAD # compare the current HEAD to v2.5
$ git branch stable v2.5 # start a new branch named "stable" based
# at v2.5
$ git reset --hard HEAD^ # reset your current branch and working
# directory to its state at HEAD^
Be careful with that last command: in addition to losing any changes in
the working directory, it will also remove all later commits from this
branch. If this branch is the only branch containing those commits,
they will be lost. Also, donâ€™t use git-reset on a publicly-visible
branch that other developers pull from, as it will force needless
merges on other developers to clean up the history. If you need to undo
changes that you have pushed, use git-revert instead.
The git-grep command can search for strings in any version of your
$ git grep "hello" v2.5
searches for all occurrences of "hello" in v2.5.
If you leave out the commit name, git-grep will search any of the files
it manages in your current directory. So
$ git grep "hello"
is a quick way to search just the files that are tracked by git.
Many git commands also take sets of commits, which can be specified in
a number of ways. Here are some examples with git-log:
$ git log v2.5..v2.6 # commits between v2.5 and v2.6
$ git log v2.5.. # commits since v2.5
$ git log --since="2 weeks ago" # commits from the last 2 weeks
$ git log v2.5.. Makefile # commits since v2.5 which modify
You can also give git-log a "range" of commits where the first is not
necessarily an ancestor of the second; for example, if the tips of the
branches "stable-release" and "master" diverged from a common commit
some time ago, then
$ git log stable..experimental
will list commits made in the experimental branch but not in the stable
$ git log experimental..stable
will show the list of commits made on the stable branch but not the
The git-log command has a weakness: it must present commits in a list.
When the history has lines of development that diverged and then merged
back together, the order in which git-log presents those commits is
Most projects with multiple contributors (such as the Linux kernel, or
git itself) have frequent merges, and gitk does a better job of
visualizing their history. For example,
$ gitk --since="2 weeks ago" drivers/
allows you to browse any commits from the last 2 weeks of commits that
modified files under the "drivers" directory. (Note: you can adjust
gitkâ€™s fonts by holding down the control key while pressing "-" or
Finally, most commands that take filenames will optionally allow you to
precede any filename by a commit, to specify a particular version of
$ git diff v2.5:Makefile HEAD:Makefile.in
You can also use git-show to see any such file:
$ git show v2.5:Makefile
This tutorial should be enough to perform basic distributed revision
control for your projects. However, to fully understand the depth and
power of git you need to understand two simple ideas on which it is
Â· The object database is the rather elegant system used to store the
history of your projectâ€”files, directories, and commits.
Â· The index file is a cache of the state of a directory tree, used to
create commits, check out working directories, and hold the various
trees involved in a merge.
Part two of this tutorial explains the object database, the index file,
and a few other odds and ends that youâ€™ll need to make the most of git.
You can find it at gittutorial-2(7).
If you donâ€™t want to continue with that right away, a few other
digressions that may be interesting at this point are:
Â· git-format-patch(1), git-am(1): These convert series of git
commits into emailed patches, and vice versa, useful for projects
such as the Linux kernel which rely heavily on emailed patches.
Â· git-bisect(1): When there is a regression in your project, one way
to track down the bug is by searching through the history to find
the exact commit thatâ€™s to blame. Git bisect can help you perform a
binary search for that commit. It is smart enough to perform a
close-to-optimal search even in the case of complex non-linear
history with lots of merged branches.
Â· gitworkflows(7): Gives an overview of recommended workflows.
Â· Everyday GIT with 20 Commands Or So
Â· gitcvs-migration(7): Git for CVS users.
gittutorial-2(7), gitcvs-migration(7), gitcore-tutorial(7),
gitglossary(7), git-help(1), gitworkflows(7), Everyday git, The Git
Part of the git(1) suite.
1. The Git Userâ€™s Manual
2. Everyday GIT with 20 Commands Or So