Provided by: xymon-client_4.3.0~beta2.dfsg-2_i386
Xymon - introduction to Xymon
Xymon is a tool for monitoring the health of your networked servers and
the applications running on them. It provides a simple, intuitive way
of checking the health of your systems from a webbrowser, and can also
alert you to any problems that arise through alarms sent as e-mail, SMS
messages, via a pager or by other means.
Xymon is Open Source software, licensed under the GNU GPL. This means
that you are free to use Xymon as much as you like, and you are free to
re-distribute it and change it to suit your specific needs. However, if
you change it then you must make your changes available to others on
the same terms that you received Xymon originally. See the file COPYING
in the Xymon source-archive for details.
Xymon was called "Hobbit" until November 2008, when it was renamed to
Xymon. This was done because the name "Hobbit" is trademarked. The
current release of Xymon is an interim version without all of the
changes needed for a full renaming, so there are still quite a few
references to the old "hobbit" name.
Xymon initially began life as an enhancement to Big Brother called
"bbgen". Over a period of 5 years, Xymon has evolved from a small add-
on to a full-fledged monitoring system with capabilities far exceeding
what was in the original Big Brother package. Xymon does still maintain
some compatibility with Big Brother, so it is possible to migrate from
Big Brother to Xymon without too much trouble.
Migrating to Xymon will give you a significant performance boost, and
provide you with much more advanced monitoring. The Xymon tools are
designed for installations that need to monitor a large number of
hosts, with very little overhead on the monitoring server. Monitoring
of thousands of hosts with a single Xymon server is possible - it was
developed to handle just this task.
These are some of the core features in Xymon:
Monitoring of hosts and networks
Xymon collects information about your systems in two ways: From
querying network services (Web, LDAP, DNS, Mail etc.), or from
scripts that run either on the Xymon server or on the systems
you monitor. The Xymon package includes a Xymon client which you
can install on the servers you monitor; it collects data about
the CPU-load, disk- and memory-utilisation, logfiles, network
ports in use, file- and directory-information and more. All of
the information is stored inside Xymon, and you can define
conditions that result in alerts, e.g. if a network service
stops responding, or a disk fills up.
All configuration of Xymon is done on the Xymon server. Even
when monitoring hundreds or thousands of hosts, you can control
their configuration centrally on the Xymon server - so there is
no need for you to login to a system just to change e.g. which
processes are monitored.
Works on all major platforms
The Xymon server works on all Unix-like systems, including
Linux, Solaris, FreeBSD, AIX, HP-UX and others. The Xymon client
supports all major Unix platforms, and there are other Open
Source projects - e.g. BBWin, see http://bbwin.sourceforge.net/
- providing support for Microsoft Windows based systems.
A simple, intuitive web-based front-end
"Green is good, red is bad". Using the Xymon webpages is as
simple as that. The hosts you monitor can be grouped together in
a way that makes sense in your organisation and presented in a
tree-structure. The webpages use many techniques to convey
information about the monitored systems, e.g. different icons
can be used for recently changed statuses; links to subpages can
be listed in multiple columns; different icons can be used for
dialup-tests or reverse-tests; selected columns can be dropped
or unconditionally included on the webpages to eliminate
unwanted information, or always include certain information;
user-friendly names can be shown for hosts regardless of their
true hostname. You can also have automatic links to on-line
documentation, so information about your critical systems is
just a click away.
Integrated trend analysis, historical data and SLA reporting
Xymon stores trend- and availability-information about
everything it monitors. So if you need to look at how your
systems behave over time, Xymon has all of the information you
need: Whether is is response times of your webpages during peak
hours, the CPU utilisation over the past 4 weeks, or what the
availability of a site was compared to the SLA - it’s all there
inside Xymon. All measurements are tracked and made available in
When you need to drill down into events that have occurred,
Xymon provides a powerful tool for viewing the event history for
each statuslog, with overviews of when problems have occurred
during the past and easy-to-use zoom-in on the event.
For SLA reporting, You can configure planned downtime, agreed
service availability level, service availability time and have
Xymon generate availability reports directly showing the actual
availability measured against the agreed SLA. Such reports of
service availability can be generated on-the-fly, or pre-
generated e.g. for monthly reporting.
You can have multiple different views of the same hosts for
different parts of the organisation, e.g. one view for the
hardware group, and another view for the webmasters - all of
them fed by the same test tools.
If you have a dedicated Network Operations Centre, you can
configure precisely which alerts will appear on their monitors -
e.g. a simple anomaly in the system logfile need not trigger a
call to 3rd-level support at 2 AM, but if the on-line shop goes
down you do want someone to respond immediately. So you put the
webcheck for the on-line shop on the NOC monitor page, and leave
out the log-file check.
Also for the techies
The Xymon user-interface is simple, but engineers will also find
lots of relevant information. E.g. the data that clients report
to Xymon contain the raw output from a number of system
commands. That information is available directly in Xymon, so
an administrator no longer needs to login to a server to get an
overview of how it is behaving - the very commands they would
normally run have alredy been performed, and the results are on-
line in Xymon.
Easy to adapt to your needs
Xymon includes a lot of tests in the core package, but there
will always be something specific to your setup that you would
like to watch. Xymon allows you to write test scripts in your
favourite scripting language and have the results show up as
regular status columns in Xymon. You can trigger alerts from
these, and even track trends in graphs just by a simple
Real network service tests
The network test tool knows how to test most commonly used
protocols, including HTTP, SMTP (e-mail), DNS, LDAP (directory
services), and many more. When checking websites, it is possible
to not only check that the webserver is responding, but also
that the response looks correct by matching the response against
a pre-defined pattern or a checksum. So you can test that a
network service is really working and supplying the data you
expect - not just that the service is running.
Protocols that use SSL encryption such as https-websites are
fully supported, and while checking such services the network
tester will automatically run a check of the validity of the SSL
server certificate, and warn about certificates that are about
Highly configurable alerts
You want to know when something breaks. But you don’t want to
get flooded with alerts all the time. Xymon lets you define
several criteria for when to send out an alert, so you only get
alerts when there is really something that needs your attention
right away. While you are handling an incident, you can tell
Xymon about it so it stops sending more alerts, and so that
everyone else can check with Xymon and know that the problem is
being taken care of.
Combined super-tests and test interdependencies
If a single test is not enough, combination tests can be defined
that combine the result of several tests to a single status-
report. So if you need to monitor that at least 3 out of 5
servers are running at any time, Xymon can do that for you and
generate the necessary availability report.
Tests can also be configured to depend on each other, so that
when a critical router goes down you will get alerts only for
the router - and not from the 200 hosts behind the router.
All of the Xymon server tools run under an unprivileged user account.
A single program - the hobbitping(1) network connectivity tester - must
be installed setuid-root, but has been written so that it drops all
root privileges immediately after performing the operation that
requires root privileges.
It is recommended that you setup a dedicated account for Xymon.
Communications between the Xymon server and Xymon clients use the Big
Brother TCP port 1984. If the Xymon server is located behind a
firewall, it must allow for inbound connections to the Xymon server on
tcp port 1984. Normally, Xymon clients - i.e. the servers you are
monitoring - must be permitted to connect to the Xymon server on this
port. However, if that is not possible due to firewall policies, then
Xymon includes the hobbitfetch(8) and msgcache(8) tools to allows for a
pull-style way of collecting data, where it is the Xymon server that
initiates connections to the clients.
The Xymon webpages are dynamically generated through CGI programs.
Access to the Xymon webpages is controlled through your webserver
access controls, e.g. you can require a login through some form of HTTP
A site running this software can be seen at http://www.hswn.dk/hobbit/
PREREQUISITES AND INSTALLATION
You will need a Unix-like system (Linux, Solaris, HP-UX, AIX, FreeBSD,
Mac OS X or similar) with a webserver installed. You will also need a C
compiler and som additional libraries, but many systems come with the
required development tools and libraries pre-installed. The required
RRDtool This library is used to store and present trend-data. It is
libpcre This library is used for advanced pattern-matching of text
strings in configuration files. This library is required.
OpenSSL This library is used for communication with SSL-enabled network
services. Although optional, it is recommended that you install this
for Xymon since many network tests do use SSL.
OpenLDAP This library is used for testing LDAP servers. Use of this is
For more detailed information about Xymon system requirements and how
to install Xymon, refer to the online documentation "Installing Xymon"
available from the Xymon webserver (via the "Help" menu), or from the
"docs/install.html" file in the Xymon source archive.
SUPPORT and MAILING LISTS
email@example.com is an open mailing list for discussions about Xymon. If
you would like to participate, send an e-mail to hobbit-
firstname.lastname@example.org to join the list.
An archive of the mailing list is available at
If you just want to be notified of new releases of Xymon, please
subscribe to the hobbit-announce mailing list. This is a moderated
list, used only for announcing new Xymon releases. To be added to the
list, send an e-mail to email@example.com.
XYMON SERVER TOOLS
These tools implement the core functionality of the Xymon server:
hobbitd(8) is the core daemon that collects all reports about the
status of your hosts. It uses a number of helper modules to implement
certain tasks such as updating logfiles and sending out alerts:
hobbitd_client, hobbitd_history, hobbitd_alert and hobbitd_rrd. There
is also a hobbitd_filestore module for compatibility with Big Brother.
hobbitd_channel(8) Implements the communication between the Xymon
daemon and the other Xymon server modules.
hobbitd_history(8) Stores historical data about the things that Xymon
hobbitd_rrd(8) Stores trend data, which is used to generate graphs of
the data monitored by Xymon.
hobbitd_alert(8) handles alerts. When a status changes to a critical
state, this module decides if an alert should be sent out, and to whom.
hobbitd_client(8) handles data collected by the Xymon clients, analyzes
the data and feeds back several status updates to Xymon to build the
view of the client status.
hobbitd_hostdata(8) stores historical client data when something
breaks. E.g. when a webpage stops responding hobbitd_hostdata will save
the latest client data, so that you can use this to view a snapshot of
how the system state was just prior to it failing.
XYMON NETWORK TEST TOOLS
These tools are used on servers that execute tests of network services.
hobbitping(1) performs network connectivity (ping) tests.
bbtest-net(1) runs the network service tests.
bbretest-net.sh(1) is an extension script for re-doing failed network
tests with a higher frequency than the normal network tests. This
allows Xymon to pick up the recovery of a network service as soon as it
happens, resulting in less downtime being recorded.
XYMON TOOLS HANDLING THE WEB USER-INTERFACE
These tools take care of generating and updating the various Xymon web-
bbgen(1) takes care of updating the Xymon webpages.
hobbitsvc.cgi(1) This CGI program generates an HTML view of a single
status log. It is used to present the Xymon status-logs.
hobbitgraph.cgi(1) This CGI program generates graphs of the trend-data
collected by Xymon.
hobbit-hostgraphs.cgi(1) When you want to combine multiple graphs into
one, this CGI lets you combine graphs so you can e.g. compare the load
on all of the nodes in your server farm.
hobbit-nkview.cgi(1) Generates the Critical Systems view, based on the
currently critical systems and the configuration of what systems and
services you want to monitor when.
bb-hist.cgi(1) This CGI program generates a webpage with the most
recent history of a particular host+service combination.
bb-eventlog.cgi(1) This CGI lets you view a log of events that have
happened over a period of time, for a single host or test, or for
bb-ack.cgi(1) This CGI program allows a user to acknowledge an alert he
received from Xymon about a host that is in a critical state.
Acknowledging an alert serves two purposes: First, it stops more alerts
from being sent so the technicians are not bothered wit more alerts,
and secondly it provides feedback to those looking at the Xymon
webpages that the problem is being handled.
hobbit-mailack(8) is a tool for processing acknowledgements sent via e-
mail, e.g. as a response to an e-mail alert.
hobbit-enadis.cgi(8) is a CGI program to disable or re-enable hosts or
individual tests. When disabling a host or test, you stop alarms from
being sent and also any outages do not affect the SLA calculations. So
this tool is useful when systems are being brought down for
bb-findhost.cgi(1) is a CGI program that finds a given host in the
Xymon webpages. As your Xymon installation grows, it can become
difficult to remember exactly which page a host is on; this CGI script
lets you find hosts easily.
bb-rep.cgi(1) This CGI program triggers the generation of Xymon
availability reports, using bbgen(1) as the reporting back-end engine.
bb-replog.cgi(1) This CGI program generates the detailed availability
report for a particular host+service combination.
bb-snapshot.cgi(1) is a CGI program to build the Xymon webpages in a
"snapshot" mode, showing the look of the webpages at a particular point
in time. It uses bbgen(1) as the back-end engine.
hobbit-statusreport.cgi(1) is a CGI program reporting test results for
a single status but for several hosts. It is used to e.g. see which SSL
certificates are about to expire, across all of the Xymon webpages.
bb-csvinfo.cgi(1) is a CGI program to present information about a host.
The information is pulled from a CSV (Comma Separated Values) file,
which is easily exported from any spreadsheet or database program.
logfetch(1) is a utility used by the Xymon Unix client to collect
information from logfiles on the client. It can also monitor various
other file-related data, e.g. file metadata or directory sizes.
clientupdate(1) Is used on Xymon clients, to automatically update the
client software with new versions. Through this tool, updates of the
client software can happen without an administrator having to logon to
msgcache(8) This tool acts as a mini Xymon server to the client. It
stores client data internally, so that the hobbitfetch(8) utility can
pick it up later and send it to the Xymon server. It is typically used
on hosts that cannot contact the Xymon server directly due to network-
XYMON COMMUNICATION TOOLS
These tools are used for communications between the Xymon server and
the Xymon clients. If there are no firewalls then they are not needed,
but it may be necessary due to network or firewall issues to make use
bbproxy(8) is a proxy-server that forwards Xymon messages between
clients and the Xymon server. The clients must be able to talk to the
proxy, and the proxy must be able to talk to the Xymon server.
hobbitfetch(8) is used when the client is not able to make outbound
connections to neither bbproxy nor the Xymon server (typically, for
clients located in a DMZ network zone). Together with the msgcache(8)
utility running on the client, the Xymon server can contact the clients
and pick up their data.
hobbitlaunch(8) is a program scheduler for Xymon. It acts as a master
program for running all of the Xymon tools on a system. On the Xymon
server, it controls running all of the server tasks. On a Xymon client,
it periodically launches the client to collect data and send them to
the Xymon server.
bb(1) is the tool used to communicate with the Xymon server. It is
used to send status reports to the Xymon server, through the custom
Xymon/BB protocol, or via HTTP. It can be used to query the state of
tests on the central Xymon server and retrieve Xymon configuration
files. The server-side script bbmessage.cgi(1) used to receive messages
sent via HTTP is also included.
bbcmd(1) is a wrapper for the other Xymon tools which sets up all of
the environment variables used by Xymon tools.
bbhostgrep(1) is a utility for use by Xymon extension scripts. It
allows an extension script to easily pick out the hosts that are
relevant to a script, so it need not parse a huge bb-hosts file with
lots of unwanted test-specifications.
bbhostshow(1) is a utility to dump the full bb-hosts(5) file following
any "include" statements.
bbdigest(1) is a utility to compute message digest values for use in
content checks that use digests.
bbcombotest(1) is an extension script for the Xymon server, allowing
you to build complicated tests from simpler Xymon test results. E.g.
you can define a test that uses the results from testing your
webserver, database server and router to have a single test showing the
availability of your enterprise web application.
trimhistory(8) is a tool to trim the Xymon history logs. It will remove
all log entries and optionally also the individual status-logs for
events that happened before a given time.
Version 1 of bbgen was relased in November 2002, and optimized the
webpage generation on Big Brother servers.
Version 2 of bbgen was released in April 2003, and added a tool for
performing network tests.
Version 3 of bbgen was released in September 2004, and eliminated the
use of several external libraries for network tests, resulting in a
significant performance improvement.
With version 4.0 released on March 30 2005, the project was de-coupled
from Big Brother, and the name changed to Xymon. This version was the
first full implementation of the Xymon server, but it still used the
data collected by Big Brother clients for monitoring host metrics.
Version 4.1 was released in July 2005 included a simple Xymon client
for Unix. Logfile monitoring was not implemented.
Version 4.2 was released in July 2006, and includes a fully functional
Xymon client for Unix.
Copyright (C) 2002-2009 Henrik Storner <firstname.lastname@example.org>
Parts of the Xymon sources are from public-domain or other freely
available sources. These are the the Red-Black tree implementation, and
the MD5-, SHA1- and RIPEMD160-implementations. Details of the license
for these is in the README file included with the Xymon sources. All
other files are released under the GNU General Public License version
2, with the additional exemption that compiling, linking, and/or using
OpenSSL is allowed. See the file COPYING for details.
hobbitd(8), hobbitd_channel(8), hobbitd_history(8), hobbitd_rrd(8),
hobbitd_alert(8), hobbitd_client(8), hobbitd_hostdata(8),
hobbitping(1), bbtest-net(1), bbretest-net.sh(1), bbgen(1),
hobbitsvc.cgi(1), hobbitgraph.cgi(1), hobbit-hostgraphs.cgi(1), hobbit-
nkview.cgi(1), bb-hist.cgi(1), bb-eventlog.cgi(1), bb-ack.cgi(1),
hobbit-mailack(8), hobbit-enadis.cgi(8), bb-findhost.cgi(1), bb-
rep.cgi(1), bb-replog.cgi(1), bb-snapshot.cgi(1), hobbit-
statusreport.cgi(1), bb-csvinfo.cgi(1), logfetch(1), clientupdate(1),
msgcache(8), bbproxy(8), hobbitfetch(8), hobbitlaunch(8), bb(1),
bbmessage.cgi(1), bbcmd(1), bbhostgrep(1), bbhostshow(1), bbdigest(1),
bbcombotest(1), trimhistory(8), bb-hosts(5), hobbitlaunch.cfg(5),
hobbitserver.cfg(5), hobbit-alerts.cfg(5), hobbit-clients.cfg(5),