Provided by:
login_4.1.4.1-1ubuntu2_i386 
НАЗВАНИЕ
login - начинает сеанс в системе
СИНТАКСИС
login [-p] [-h host] [_] [_=...]
login [-p] [-h host] -f _
login [-p] -r host
ОПИСАНИЕ
The login program is used to establish a new session with the system.
It is normally invoked automatically by responding to the login: prompt
on the user's terminal. login may be special to the shell and may not
be invoked as a sub-process. When called from a shell, login should be
executed as exec login which will cause the user to exit from the
current shell (and thus will prevent the new logged in user to return
to the session of the caller). Attempting to execute login from any
shell but the login shell will produce an error message.
В какой-то момент пользователя попросят ввести свой пароль. Чтобы
недопустить раскрытия, символы при вводе пароля не отображаются.
Разрешено очень маленькое число попыток ввода неправильного пароля,
перед тем как login закончит работу и прервёт подключение.
Если включён механизм устаревания пароля учётной записи, то перед
входом в систему может потребоваться смена пароля. Для этого нужно
ввести старый пароль и новый пароль. Подробней об этом написано в
passwd(1).
После успешного входа в систему, будут показаны сообщения от системы и
о наличии почты. Можно отключить вывод файла системных сообщений из
файла /etc/motd, создав в домашнем каталоге файл нулевой длины с именем
.hushlogin. Сообщение о наличии почты может быть одним из: "
.", " ." или " .", в
зависимости от наполненности почтового ящика.
Значения идентификатора учётной записи и группы будет взято из файла
/etc/passwd. Значения переменных $HOME, $SHELL, $PATH, $LOGNAME и $MAIL
устанавливаются согласно соответствующим полям учётной записи
пользователя. Также могут быть установлены значения ulimit, umask и
nice из поля GECOS.
В некоторых системах переменной среды $TERM будет присвоен тип
терминала линии tty, согласно данным из файла /etc/ttytype.
Также может быть выполнен сценарий инициализации пользовательского
интерпретатора команд. Подробней об этой функции смотрите
соответствующую страницу руководства.
Субсистемный вход в систему можно распознать по наличию символа "*" в
начале регистрационной оболочки. Заданный домашний каталог будет
использован как корень новой файловой системы, в которой регистрируется
пользователь.
Программа login НЕ удаляет записи о пользователях из файла utmp. Эта
задача программ getty(8) и init(8) удалять записи о владельце
терминального сеанса. Если login запускается из командной строки без
exec, то пользователь продолжает находиться в системе даже после
завершения работы в "порождённом сеансе".
ПАРАМЕТРЫ
-f
Не выполнять аутентификацию, пользователь уже прошёл проверку.
Note: In that case, username is mandatory.
-h
Имя удалённого хоста, на который нужно войти.
-p
Сохранить среду.
-r
Выполнить протокол autologin для rlogin.
Параметры -r, -h и -f используются только если login запускается
суперпользователем.
ПРЕДОСТЕРЕЖЕНИЯ
Данная версия login может быть собрана с разными параметрами и только
некоторые из них смогут быть использованы на любой машине.
Расположение файлов может отличаться на разных системах.
Программа login НЕ удаляет записи о пользователях из файла utmp. Эта
задача программ getty(8) и init(8) удалять записи о владельце
терминального сеанса. Если login запускается из командной строки без
exec, то пользователь продолжает находиться в системе даже после
завершения работы в "порождённом сеансе".
As with any program, login's appearance can be faked. If non-trusted
users have physical access to a machine, an attacker could use this to
obtain the password of the next person coming to sit in front of the
machine. Under Linux, the SAK mechanism can be used by users to
initiate a trusted path and prevent this kind of attack.
CONFIGURATION
The following configuration variables in /etc/login.defs change the
behavior of this tool:
CONSOLE_GROUPS (string)
List of groups to add to the user's supplementary groups set when
logging in on the console (as determined by the CONSOLE setting).
Default is none.
Use with caution - it is possible for users to gain permanent
access to these groups, even when not logged in on the console.
DEFAULT_HOME (boolean)
Indicate if login is allowed if we can't cd to the home directory.
Default in no.
If set to yes, the user will login in the root (/) directory if it
is not possible to cd to her home directory.
ENV_PATH (string)
If set, it will be used to define the PATH environment variable
when a regular user login. The value can be preceded by PATH=, or a
colon separated list of paths (for example /bin:/usr/bin). The
default value is PATH=/bin:/usr/bin.
ENV_SUPATH (string)
If set, it will be used to define the PATH environment variable
when the superuser login. The value can be preceded by PATH=, or a
colon separated list of paths (for example
/sbin:/bin:/usr/sbin:/usr/bin). The default value is
PATH=/bin:/usr/bin.
ERASECHAR (number)
Terminal ERASE character (010 = backspace, 0177 = DEL).
The value can be prefixed "0" for an octal value, or "0x" for an
hexadecimal value.
FAIL_DELAY (number)
Delay in seconds before being allowed another attempt after a login
failure.
FAKE_SHELL (string)
If set, login will execute this shell instead of the users' shell
specified in /etc/passwd.
HUSHLOGIN_FILE (string)
If defined, this file can inhibit all the usual chatter during the
login sequence. If a full pathname is specified, then hushed mode
will be enabled if the user's name or shell are found in the file.
If not a full pathname, then hushed mode will be enabled if the
file exists in the user's home directory.
KILLCHAR (number)
Terminal KILL character (025 = CTRL/U).
The value can be prefixed "0" for an octal value, or "0x" for an
hexadecimal value.
LOGIN_RETRIES (number)
Maximum number of login retries in case of bad password.
This will most likely be overriden by PAM, since the default
pam_unix module has it's own built in of 3 retries. However, this
is a safe fallback in case you are using an authentication module
that does not enforce PAM_MAXTRIES.
LOGIN_TIMEOUT (number)
Max time in seconds for login.
LOG_OK_LOGINS (boolean)
Enable logging of successful logins.
LOG_UNKFAIL_ENAB (boolean)
Enable display of unknown usernames when login failures are
recorded.
Note: logging unknown usernames may be a security issue if an user
enter her password instead of her login name.
TTYGROUP (string), TTYPERM (string)
The terminal permissions: the login tty will be owned by the
TTYGROUP group, and the permissions will be set to TTYPERM.
By default, the ownership of the terminal is set to the user's
primary group and the permissions are set to 0600.
TTYGROUP can be either the name of a group or a numeric group
identifier.
If you have a write program which is "setgid" to a special group
which owns the terminals, define TTYGROUP to the group number and
TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign
TTYPERM to either 622 or 600.
TTYTYPE_FILE (string)
If defined, file which maps tty line to TERM environment parameter.
Each line of the file is in a format something like "vt100 tty01".
USERGROUPS_ENAB (boolean)
If set to yes, userdel will remove the user's group if it contains
no more members, and useradd will create by default a group with
the name of the user.
ФАЙЛЫ
/var/run/utmp
содержит список работающих сеансов в системе
/var/log/wtmp
содержит список завершённых сеансов работы с системой
/etc/passwd
содержит информацию о пользователях
/etc/shadow
содержит защищаемую информацию о пользователях
/etc/motd
содержит системные сообщения за день
/etc/nologin
при существовании файла блокируется доступ в систему обычным
пользователям
/etc/ttytype
содержит список типов терминалов
$HOME/.hushlogin
при существовании файла системные сообщения при входе в систему не
выводятся
СМОТРИТЕ ТАКЖЕ
mail(1), passwd(1), sh(1), su(1), login.defs(5), nologin(5), passwd(5),
securetty(5), getty(8).