Provided by: smbfs_3.4.7~dfsg-1ubuntu3_i386 bug

NAME

       mount.cifs - mount using the Common Internet File System (CIFS)

SYNOPSIS

       mount.cifs {service} {mount-point} [-o options]

DESCRIPTION

       This tool is part of the samba(7) suite.

       mount.cifs mounts a Linux CIFS filesystem. It is usually invoked
       indirectly by the mount(8) command when using the "-t cifs" option.
       This command only works in Linux, and the kernel must support the cifs
       filesystem. The CIFS protocol is the successor to the SMB protocol and
       is supported by most Windows servers and many other commercial servers
       and Network Attached Storage appliances as well as by the popular Open
       Source server Samba.

       The mount.cifs utility attaches the UNC name (exported network
       resource) specified as service (using //server/share syntax, where
       "server" is the server name or IP address and "share" is the name of
       the share) to the local directory mount-point. It is possible to set
       the mode for mount.cifs to setuid root to allow non-root users to mount
       shares to directories for which they have write permission.

       Options to mount.cifs are specified as a comma-separated list of
       key=value pairs. It is possible to send options other than those listed
       here, assuming that the cifs filesystem kernel module (cifs.ko)
       supports them. Unrecognized cifs mount options passed to the cifs vfs
       kernel code will be logged to the kernel log.

       mount.cifs causes the cifs vfs to launch a thread named cifsd. After
       mounting it keeps running until the mounted resource is unmounted
       (usually via the umount utility).

       mount.cifs -V command displays the version of cifs mount helper.

       modinfo cifs command displays the version of cifs module.

OPTIONS

       user=arg
           specifies the username to connect as. If this is not given, then
           the environment variable USER is used. This option can also take
           the form "user%password" or "workgroup/user" or
           "workgroup/user%password" to allow the password and workgroup to be
           specified as part of the username.

               Note
               The cifs vfs accepts the parameter user=, or for users familiar
               with smbfs it accepts the longer form of the parameter
               username=. Similarly the longer smbfs style parameter names may
               be accepted as synonyms for the shorter cifs parameters
               pass=,dom= and cred=.

       password=arg
           specifies the CIFS password. If this option is not given then the
           environment variable PASSWD is used. If the password is not
           specified directly or indirectly via an argument to mount,
           mount.cifs will prompt for a password, unless the guest option is
           specified.

           Note that a password which contains the delimiter character (i.e. a
           comma ´,´) will fail to be parsed correctly on the command line.
           However, the same password defined in the PASSWD environment
           variable or via a credentials file (see below) or entered at the
           password prompt will be read correctly.

       credentials=filename
           specifies a file that contains a username and/or password and
           optionally the name of the workgroup. The format of the file is:

                         username=value
                         password=value
                         domain=value

           This is preferred over having passwords in plaintext in a shared
           file, such as /etc/fstab. Be sure to protect any credentials file
           properly.

       uid=arg
           sets the uid that will own all files on the mounted filesystem. It
           may be specified as either a username or a numeric uid. For mounts
           to servers which do support the CIFS Unix extensions, such as a
           properly configured Samba server, the server provides the uid, gid
           and mode so this parameter should not be specified unless the
           server and client uid and gid numbering differ. If the server and
           client are in the same domain (e.g. running winbind or nss_ldap)
           and the server supports the Unix Extensions then the uid and gid
           can be retrieved from the server (and uid and gid would not have to
           be specified on the mount. For servers which do not support the
           CIFS Unix extensions, the default uid (and gid) returned on lookup
           of existing files will be the uid (gid) of the person who executed
           the mount (root, except when mount.cifs is configured setuid for
           user mounts) unless the "uid=" (gid) mount option is specified. For
           the uid (gid) of newly created files and directories, ie files
           created since the last mount of the server share, the expected uid
           (gid) is cached as long as the inode remains in memory on the
           client. Also note that permission checks (authorization checks) on
           accesses to a file occur at the server, but there are cases in
           which an administrator may want to restrict at the client as well.
           For those servers which do not report a uid/gid owner (such as
           Windows), permissions can also be checked at the client, and a
           crude form of client side permission checking can be enabled by
           specifying file_mode and dir_mode on the client. Note that the
           mount.cifs helper must be at version 1.10 or higher to support
           specifying the uid (or gid) in non-numeric form.

       gid=arg
           sets the gid that will own all files on the mounted filesystem. It
           may be specified as either a groupname or a numeric gid. For other
           considerations see the description of uid above.

       port=arg
           sets the port number on the server to attempt to contact to
           negotiate CIFS support. If the CIFS server is not listening on this
           port or if it is not specified, the default ports will be tried
           i.e. port 445 is tried and if no response then port 139 is tried.

       servern=arg
           Specify the server netbios name (RFC1001 name) to use when
           attempting to setup a session to the server. Although rarely needed
           for mounting to newer servers, this option is needed for mounting
           to some older servers (such as OS/2 or Windows 98 and Windows ME)
           since when connecting over port 139 they, unlike most newer
           servers, do not support a default server name. A server name can be
           up to 15 characters long and is usually uppercased.

       netbiosname=arg
           When mounting to servers via port 139, specifies the RFC1001 source
           name to use to represent the client netbios machine name when doing
           the RFC1001 netbios session initialize.

       file_mode=arg
           If the server does not support the CIFS Unix extensions this
           overrides the default file mode.

       dir_mode=arg
           If the server does not support the CIFS Unix extensions this
           overrides the default mode for directories.

       ip=arg
           sets the destination IP address. This option is set automatically
           if the server name portion of the requested UNC name can be
           resolved so rarely needs to be specified by the user.

       domain=arg
           sets the domain (workgroup) of the user

       guest
           don´t prompt for a password

       iocharset
           Charset used to convert local path names to and from Unicode.
           Unicode is used by default for network path names if the server
           supports it. If iocharset is not specified then the nls_default
           specified during the local client kernel build will be used. If
           server does not support Unicode, this parameter is unused.

       ro
           mount read-only

       rw
           mount read-write

       setuids
           If the CIFS Unix extensions are negotiated with the server the
           client will attempt to set the effective uid and gid of the local
           process on newly created files, directories, and devices (create,
           mkdir, mknod). If the CIFS Unix Extensions are not negotiated, for
           newly created files and directories instead of using the default
           uid and gid specified on the the mount, cache the new file´s uid
           and gid locally which means that the uid for the file can change
           when the inode is reloaded (or the user remounts the share).

       nosetuids
           The client will not attempt to set the uid and gid on on newly
           created files, directories, and devices (create, mkdir, mknod)
           which will result in the server setting the uid and gid to the
           default (usually the server uid of the user who mounted the share).
           Letting the server (rather than the client) set the uid and gid is
           the default.If the CIFS Unix Extensions are not negotiated then the
           uid and gid for new files will appear to be the uid (gid) of the
           mounter or the uid (gid) parameter specified on the mount.

       perm
           Client does permission checks (vfs_permission check of uid and gid
           of the file against the mode and desired operation), Note that this
           is in addition to the normal ACL check on the target machine done
           by the server software. Client permission checking is enabled by
           default.

       noperm
           Client does not do permission checks. This can expose files on this
           mount to access by other users on the local client system. It is
           typically only needed when the server supports the CIFS Unix
           Extensions but the UIDs/GIDs on the client and server system do not
           match closely enough to allow access by the user doing the mount.
           Note that this does not affect the normal ACL check on the target
           machine done by the server software (of the server ACL against the
           user name provided at mount time).

       directio
           Do not do inode data caching on files opened on this mount. This
           precludes mmaping files on this mount. In some cases with fast
           networks and little or no caching benefits on the client (e.g. when
           the application is doing large sequential reads bigger than page
           size without rereading the same data) this can provide better
           performance than the default behavior which caches reads
           (readahead) and writes (writebehind) through the local Linux client
           pagecache if oplock (caching token) is granted and held. Note that
           direct allows write operations larger than page size to be sent to
           the server. On some kernels this requires the cifs.ko module to be
           built with the CIFS_EXPERIMENTAL configure option.

       mapchars
           Translate six of the seven reserved characters (not backslash, but
           including the colon, question mark, pipe, asterik, greater than and
           less than characters) to the remap range (above 0xF000), which also
           allows the CIFS client to recognize files created with such
           characters by Windows´s POSIX emulation. This can also be useful
           when mounting to most versions of Samba (which also forbids
           creating and opening files whose names contain any of these seven
           characters). This has no effect if the server does not support
           Unicode on the wire.

       nomapchars
           Do not translate any of these seven characters (default)

       intr
           currently unimplemented

       nointr
           (default) currently unimplemented

       hard
           The program accessing a file on the cifs mounted file system will
           hang when the server crashes.

       soft
           (default) The program accessing a file on the cifs mounted file
           system will not hang when the server crashes and will return errors
           to the user application.

       noacl
           Do not allow POSIX ACL operations even if server would support
           them.

           The CIFS client can get and set POSIX ACLs (getfacl, setfacl) to
           Samba servers version 3.0.10 and later. Setting POSIX ACLs requires
           enabling both XATTR and then POSIX support in the CIFS
           configuration options when building the cifs module. POSIX ACL
           support can be disabled on a per mount basis by specifying "noacl"
           on mount.

       nocase
           Request case insensitive path name matching (case sensitive is the
           default if the server suports it).

       sec=
           Security mode. Allowed values are:

           ·   none attempt to connection as a null user (no name)

           ·   krb5 Use Kerberos version 5 authentication

           ·   krb5i Use Kerberos authentication and packet signing

           ·   ntlm Use NTLM password hashing (default)

           ·   ntlmi Use NTLM password hashing with signing (if
               /proc/fs/cifs/PacketSigningEnabled on or if server requires
               signing also can be the default)

           ·   ntlmv2 Use NTLMv2 password hashing

           ·   ntlmv2i Use NTLMv2 password hashing with packet signing

           [NB This [sec parameter] is under development and expected to be
           available in cifs kernel module 1.40 and later]

       nobrl
           Do not send byte range lock requests to the server. This is
           necessary for certain applications that break with cifs style
           mandatory byte range locks (and most cifs servers do not yet
           support requesting advisory byte range locks).

       sfu
           When the CIFS Unix Extensions are not negotiated, attempt to create
           device files and fifos in a format compatible with Services for
           Unix (SFU). In addition retrieve bits 10-12 of the mode via the
           SETFILEBITS extended attribute (as SFU does). In the future the
           bottom 9 bits of the mode mode also will be emulated using queries
           of the security descriptor (ACL). [NB: requires version 1.39 or
           later of the CIFS VFS. To recognize symlinks and be able to create
           symlinks in an SFU interoperable form requires version 1.40 or
           later of the CIFS VFS kernel module.

       serverino
           Use inode numbers (unique persistent file identifiers) returned by
           the server instead of automatically generating temporary inode
           numbers on the client. Although server inode numbers make it easier
           to spot hardlinked files (as they will have the same inode numbers)
           and inode numbers may be persistent (which is userful for some
           sofware), the server does not guarantee that the inode numbers are
           unique if multiple server side mounts are exported under a single
           share (since inode numbers on the servers might not be unique if
           multiple filesystems are mounted under the same shared higher level
           directory). Note that not all servers support returning server
           inode numbers, although those that support the CIFS Unix
           Extensions, and Windows 2000 and later servers typically do support
           this (although not necessarily on every local server filesystem).
           Parameter has no effect if the server lacks support for returning
           inode numbers or equivalent.

       noserverino
           client generates inode numbers (rather than using the actual one
           from the server) by default.

       nouser_xattr
           (default) Do not allow getfattr/setfattr to get/set xattrs, even if
           server would support it otherwise.

       rsize=arg
           default network read size (usually 16K). The client currently can
           not use rsize larger than CIFSMaxBufSize. CIFSMaxBufSize defaults
           to 16K and may be changed (from 8K to the maximum kmalloc size
           allowed by your kernel) at module install time for cifs.ko. Setting
           CIFSMaxBufSize to a very large value will cause cifs to use more
           memory and may reduce performance in some cases. To use rsize
           greater than 127K (the original cifs protocol maximum) also
           requires that the server support a new Unix Capability flag (for
           very large read) which some newer servers (e.g. Samba 3.0.26 or
           later) do. rsize can be set from a minimum of 2048 to a maximum of
           130048 (127K or CIFSMaxBufSize, whichever is smaller)

       wsize=arg
           default network write size (default 57344) maximum wsize currently
           allowed by CIFS is 57344 (fourteen 4096 byte pages)

       --verbose
           Print additional debugging information for the mount. Note that
           this parameter must be specified before the -o. For example:

           mount -t cifs //server/share /mnt --verbose -o user=username

SERVICE FORMATTING AND DELIMITERS

       It´s generally preferred to use forward slashes (/) as a delimiter in
       service names. They are considered to be the "universal delimiter"
       since they are generally not allowed to be embedded within path
       components on Windows machines and the client can convert them to
       blackslashes (\) unconditionally. Conversely, backslash characters are
       allowed by POSIX to be part of a path component, and can´t be
       automatically converted in the same way.

       mount.cifs will attempt to convert backslashes to forward slashes where
       it´s able to do so, but it cannot do so in any path component following
       the sharename.

ENVIRONMENT VARIABLES

       The variable USER may contain the username of the person to be used to
       authenticate to the server. The variable can be used to set both
       username and password by using the format username%password.

       The variable PASSWD may contain the password of the person using the
       client.

       The variable PASSWD_FILE may contain the pathname of a file to read the
       password from. A single line of input is read and used as the password.

NOTES

       This command may be used only by root, unless installed setuid, in
       which case the noeexec and nosuid mount flags are enabled.

CONFIGURATION

       The primary mechanism for making configuration changes and for reading
       debug information for the cifs vfs is via the Linux /proc filesystem.
       In the directory /proc/fs/cifs are various configuration files and
       pseudo files which can display debug information. There are additional
       startup options such as maximum buffer size and number of buffers which
       only may be set when the kernel cifs vfs (cifs.ko module) is loaded.
       These can be seen by running the modinfo utility against the file
       cifs.ko which will list the options that may be passed to cifs during
       module installation (device driver load). For more information see the
       kernel file fs/cifs/README.

BUGS

       Mounting using the CIFS URL specification is currently not supported.

       The credentials file does not handle usernames or passwords with
       leading space.

       Note that the typical response to a bug report is a suggestion to try
       the latest version first. So please try doing that first, and always
       include which versions you use of relevant software when reporting bugs
       (minimum: mount.cifs (try mount.cifs -V), kernel (see /proc/version)
       and server type you are trying to contact.

VERSION

       This man page is correct for version 1.52 of the cifs vfs filesystem
       (roughly Linux kernel 2.6.24).

SEE ALSO

       Documentation/filesystems/cifs.txt and fs/cifs/README in the linux
       kernel source tree may contain additional options and information.

       umount.cifs(8)

AUTHOR

       Steve French

       The syntax and manpage were loosely based on that of smbmount. It was
       converted to Docbook/XML by Jelmer Vernooij.

       The maintainer of the Linux cifs vfs and the userspace tool mount.cifs
       is Steve French. The Linux CIFS Mailing list is the preferred place to
       ask questions regarding these programs.