Provided by:
amule-utils_2.2.6+debian0-7_i386 
NAME
amulecmd - Programma basato su console per controllare aMule
SYNOPSIS
amulecmd [-h <host>] [-p <port>] [-P <passwd>] [-f <path>] [-q] [-v]
[-l <lang>] [-w] [-c <command>]
amulecmd --create-config-from=<path>
amulecmd [--help]
amulecmd [--version]
DESCRIZIONE
amulecmd è un client basato su console per controllare aMule.
-h, --host=<host>
Host in cui aMule è in esecuzione (predefinito: localhost).
<host> potrebbe essere un indirizzo IP o un nome DNS
-p, --port=<port>
Porta di aMule per connessioni esterne, come impostato in
Preferenze->Controlli remoti (predefinito: 4712)
-P, --password=<passwd>
Password di connessioni esterne
-f, --config-file=<path>
Utilizza il file di configurazione dato. Il file di
configurazione predefinito è ~/.aMule/remote.conf
-q, --quiet
Non mostrare alcun output in stdout. Ciò sembra un’opzione molto
inutile con amulecmd.
-v, --verbose
Sii prolisso - mostra anche messaggi di debug
-l, --locale=<lang>
Imposta il locale del programma (linguaggio). Consulta la
sezione LANGUAGES per la descrizione del parametro <lang>.
-w, --write-config
Scrivi le opzioni della linea di comando nel file di
configurazione ed esci
-c, --command=<command>
Esegui <command> come se fosse stato inserito nel prompt di
amulecmd ed esci.
--create-config-from=<path>
Crea un file di configurazione basato su <path>, che deve
puntare su un file di configurazione di aMule valido, e poi esce
--help Mostra una breve descrizione di utilizzo.
--version
Mostra il numero di versione corrente.
COMMANDS
Tutti i comandi non dipendono dal caps lock.
Add <ed2k-link>
Aggiunge un collegamento ed2k al nucleo.
Il collegamento ed2k da aggiungere può essere:
*) un collegamento file (ed2k://|file|...), sarà aggiunto alla coda
degli scaricamenti;
*) un collegamento server (ed2k://|server|...), sarà aggiunto
all’elenco dei server;
*) oppure un collegamento di un elenco di server, nel cui caso tutti i
server nell’elenco saranno aggiunti all’elenco dei server.
Questo comando deve avere un argomento.
Cancel <hash>
Annulla lo scaricamento specificato dall’hash. Per ottenere l’hash
utilizza show.
Connect (kad|ed2k<ip|name>)
Connettiti alla rete.
This will connect to all networks that are enabled in Preferences.
When giving ed2k as parameter, it connects only to ed2k-network to
servers in your serverlist. You may also optionally specify a server
address in IP:Port form, to connect to that server only. The IP must be
a dotted decimal IPv4 address, or a resolvable DNS name.
When giving kad, it connects to Kad only.
Disconnect (ed2k|kad)
Disconnettiti da tutte le reti a cui sei conesso, o semplicemente
disconnettiti dalla rete specificata.
Download num
Avvia lo scaricamento di un file.
The number of a file from the last search has to be given. Example:
’download 12’ will start to download the file with the number 12 of the
previous search.
Questo comando deve avere un argomento.
Exit
Disconnect from amule/amuled and quit amulecmd.
Get value
Ottieni e mostra un valore di preferenza.
Questo comando è incompleto, valori disponibili sono elencati qua
sotto.
Valori disponibili per ottenere:
BwLimits Ottieni i limiti della larghezza della banda.
IPFilter Ottieni le preferenze IPFilter.
Help <command>
Ottieni un breve aiuto. If called without parameter, it shows a list
of available commands. If called with <command>, it shows a short
description of the given command.
Pause <hash>
Pauses the download specified by hash. To get the hash use show.
Progress
Shows the progress of an on-going search.
Questo comando non può avere un argomento.
Quit
Esce dall’applicazione.
Questo comando non può avere un argomento.
Reload
Ricarica un oggetto dato.
Questo comando è incompleto, valori disponibili sono elencati qua
sotto.
Valori disponibili da ottenere:
BwLimits Reload bandwidth limits.
IPFilter Reload IPFilter preferences.
Reset
Reset the log.
Questo comando non può avere un argomento.
Results
Shows you the results of the last search.
Questo comando non può avere un argomento.
Resume <hash>
Resumes the download specified by hash. To get the hash use show.
Search global|kad|local file
Makes a search for the given file. A searchtype and a file to search is
mandatory to do this. Example ’search kad amule’ performs a kad search
for amule.
Available searchtypes:
global performs a global search
kad performs a search on kad network
local performs a local search
Set <value>
Imposta un valore di preferenze dato.
This command is incomplete, available values are listed below.
Available values to get:
BwLimits Set bandwidth limits.
IPFilter Set IPFilter preferences.
Show DL|Log|Servers|UL
Shows upload/download queue, servers list or shared files list.
Questo comando deve avere un argomento.
This command is incomplete, you must use one of the extensions below.
Estensioni disponibili:
DL Mostra coda scaricamenti.
Log Mostra registro.
Servers Mostra elenco server.
UL Mostra coda caricamenti.
Shutdown
Shutdown the remote running core (amule/amuled). This will also shut
down the text client, since it is unusable without a running core.
This command can’t have an argument.
Statistics <num>
Show statistics tree.
The optional number in the range of 0-255 can be passed as argument to
this command, which tells how many entries of the client version
subtree should be shown. Passing 0, or omitting it means ’unlimited’.
Example: ’statistics 5’ will show only the top 5 versions for each
client type.
Status
Show connection status, current up/download speeds, etc.
NOTE
Percorsi
For all options which take a <path> value, if the path contains no
directory part (i.e. just a plain filename), then it is considered to
be under the aMule configuration directory, ~/.aMule.
LANGUAGES
The <lang> parameter for the -l option has the following form:
lang[_LANG][.encoding][@modifier] where lang is the primary language,
LANG is a sublanguage/territory, encoding is the character set to use
and modifier "allows the user to select a specific instance of
localization data within a single category".
Per esempio, le stringhe seguenti sono valide:
de
de_DE
de_DE.iso88591
de_DE@euro
de_DE.iso88591@euro
Though all the above strings are accepted as valid language
definitions, encoding and modifier are yet unused.
In addition to the format above, you can also specify full language
names in English - so -l german is also valid and is equal to -l de_DE.
When no locale is defined, either on command-line or in config file,
system default language will be used.
FILE
~/.aMule/remote.conf
ESEMPIO
Di norma amulecmd sarà eseguito inizialmente come:
amulecmd -h hostname -p ECport -P ECpassword -w
or
amulecmd --create-config-from=/home/username/.aMule/amule.conf
These will save settings to $HOME/.aMule/remote.conf, and later you
only need to type:
amulecmd
Ovviamente, non devi seguire questo esempio.
SEGNALARE BUG
Please report bugs either on our forum (http://forum.amule.org/), or in
our bugtracker (http://bugs.amule.org/). Please do not report bugs in
e-mail, neither to our mailing list nor directly to any team member.
COPYRIGHT
aMule and all of its related utilities are distributed under the GNU
General Public License.
SEE ALSO
amule(1), amuleweb(1)