Provided by: amule-daemon_2.2.6+debian0-7_i386 bug

NOME

       amuleweb - Server web aMule

SINOPSI

       amuleweb  [-h  <host>]  [-p <port>] [-P <passwd>] [-f <path>] [-q] [-v]
       [-l <lang>] [-w] [-t <name>]  [-s  <port>]  [-u]  [-U]  [-z]  [-Z]  [-A
       <pass>] [-G <pass>] [-a] [-d] [-L] [-N]

       amuleweb [-f <path>] --create-config-from=<path>

       amuleweb [--help] [--version]

       amuleweb --amule-config-file=<path>

       amuleweb --no-php

DESCRIZIONE

       amuleweb  gestisce  il  tuo accesso ad amule attraverso un browser web.
       Puoi avviare amuleweb assieme ad amule(1), o  separatamente,  in  tempi
       successivi.   Le  opzioni  possono  essere specificate tramite linea di
       comando oppure tramite file di configurazione.  Le opzioni da linea  di
       comando hanno la precedenza sulle opzioni da file di configurazione.

       -h, --host=<host>
              L’host  in  cui  aMule è in esecuzione (predefinito: localhost).
              <host> potrebbe essere un indirizzo IP o un nome DNS.

       -p, --port=<port>
              La porta di aMule per connessioni  esterne,  come  impostato  in
              Preferenze->Controlli remoti (predefinita: 4712).

       -P, --password=<passwd>.
              Password per le connessioni esterne.

       -f, --config-file=<path>
              Utilizza   il  file  di  configurazione  fornito.   Il  file  di
              configurazione predefinito è ~/.aMule/remote.conf .

       -q, --quiet
              Non mostrare alcun output in stdout.  You may want to use -q  to
              daemonize the webserver, i.e. running as ’amuleweb -q &’.

       -v, --verbose
              Sii prolisso - mostra anche i messaggi di debug.

       -l, --locale=<lang>
              Imposta il locale del programma (lingua).  See section LANGUAGES
              for the description of the <lang> parameter.

       -w, --write-config
              Writes command line options to config file and exit.

       --create-config-from=<path>
              Creates config file based upon <path>, which  must  point  to  a
              valid aMule config file, and then exit.

       -t, --template=<name>
              Loads  the  template  named  <name>.  See  also the section SKIN
              SUPPORT.

       -s, --server-port=<port>
              Porta HTTP del server web. Questa è la porta su cui puoi pontare
              il tuo browser (predefinita: 4711).

       -z, --enable-upnp
              Abilita  l’utilizzo  dell’inoltro  di una porta UPnP sulla porta
              del server web.

       -U, --upnp-port
              Porta UPnP.

       -z, --enable-gzip
              Enables  using  gzip  compression  in  HTTP  traffic   to   save
              bandwidth.

       -Z, --disable-gzip
              Disables using gzip compression (this is the default).

       -A, --admin-pass=<passwd>
              Full access password for webserver.

       -G, --guest-pass=<passwd>
              Password ospite per il server web.

       -a, --allow-guest
              Permette l’accesso di ospiti.

       -d, --deny-guest
              Nega l’accesso di ospiti (predefinito).

       -L, --load-settings
              Load/save  webserver settings from/to remote aMule.  This causes
              amuleweb to ignore command-line and  config-file  settings,  and
              load  them  from  aMule.   When  saving preferences none will be
              written to the config file, but  to  aMule.   (Of  course,  this
              works  only  for  those  settings  that  can  be  set in aMule’s
              Preferences->Remote Controls.)

       -N, --no-script-cache
              Recompiles PHP pages on each request.

       --amule-config-file=<path>
              aMule config file path.  DO NOT USE DIRECTLY!  aMule  uses  this
              option  when  starting  amuleweb  at aMule startup.  This option
              causes all other command-line and  config-file  settings  to  be
              ignored,  preferences to be read from the given config file, and
              also implies the -q -L options.

       --help Mostra una breve descrizione di utilizzo.

       --version
              Mostra il numero di versione corrente.

NOTE

   Percorsi
       For all options which take a <path> value,  if  the  path  contains  no
       directory  part  (i.e. just a plain filename), then it is considered to
       be under the aMule configuration directory, ~/.aMule.

   LANGUAGES
       The <lang>  parameter  for  the  -l  option  has  the  following  form:
       lang[_LANG][.encoding][@modifier]  where  lang is the primary language,
       LANG is a sublanguage/territory, encoding is the character set  to  use
       and  modifier  "allows  the  user  to  select  a  specific  instance of
       localization data within a single category".

       Per esempio, le stringhe seguenti sono valide:
       de
       de_DE
       de_DE.iso88591
       de_DE@euro
       de_DE.iso88591@euro

       Though  all  the  above  strings  are  accepted   as   valid   language
       definitions, encoding and modifier are yet unused.

       In  addition  to  the  format above, you can also specify full language
       names in English - so -l german is also valid and is equal to -l de_DE.

       When  no  locale  is defined, either on command-line or in config file,
       system default language will be used.

SKIN SUPPORT

       amuleweb is capable  of  displaying  information  in  different  skins.
       These  skins  are  called  templates,  and you can make amuleweb load a
       specific template via  the  -t  command  line  option.   Templates  are
       searched  in  two  places:  first  in  ~/.aMule/webserver/  and then in
       $(pkgdatadir)/webserver/ ($(pkgdatadir)  is  the  install  location  of
       architecture    independent    data,   most   likely   something   like
       /usr/share/amule).  Each template must be  in  a  subdirectory  of  the
       template  name,  and this directory must contain all files the template
       needs.  The actual template filename must be aMule.tmpl.

       For  example,  the   default   template   (named   ’default’)   is   in
       webserver/default/,  and  this  directory contains aMule.tmpl amongst a
       lot of image files.

FILE

       ~/.aMule/remote.conf
       ~/.aMule/webserver/
       $(pkgdatadir)/webserver/

ESEMPIO

       Typically amuleweb will be first run as:

       amuleweb  -h  hostname  -p  ECport  -P  ECpassword   -s   HTTPport   -A
       AdminPassword -w

       or

       amuleweb --create-config-from=/home/username/.aMule/amule.conf

       These  will  save  settings  to $HOME/.aMule/remote.conf, and later you
       only need to type:

       amuleweb

       Of course, you may specify any  more  or  less  options  on  the  first
       example line, and you may also totally omit it.

SEGNALARE BUG

       Please report bugs either on our forum (http://forum.amule.org/), or in
       our bugtracker (http://bugs.amule.org/).  Please do not report bugs  in
       e-mail, neither to our mailing list nor directly to any team member.

COPYRIGHT

       aMule  e  tutte  le sue utilità correlate sono distribuite sotto la GNU
       General Public License.

CONSULTA ANCHE

       amule(1), amulecmd(1)