Provided by: amtterm_1.2-1_i386 bug

NAME

       amttool - remotely control Intel AMT managed machines.

SYNOPSIS

       amttool host [ command ] [ arg(s) ]

DESCRIPTION

       amttool  is  a  perl  script  which  speaks  SOAP  to Intel AMT managed
       machines.  It can query informations about the machine in question  and
       also send some commands for basic remote control.

       host  is  the  hostname  or  IP  address  of the machine amttool should
       control.  command is an optional command.

       You must set  fill  AMT_PASSWORD  environment  variable  with  the  AMT
       password.

       For more inforamtions on Intel AMT check amt-howto(7).

COMMANDS

       info   gather information (default).

       reset [ special ]
              reset  machine,  with  optional  special  command  (see  section
              below).

       powerup [ special ]
              turn on machine.

       powerdown
              turn off machine.

       powercycle [ special ]
              powercycle machine.

       netinfo
              print network configuration (requires AMT 2.5+).

       netconf if link [ ip mask gw [ dns1 [ dns2 ]]]
              configure network interface (requires  AMT  2.5+).   if  is  the
              interface  handle,  link the link policy.  If in doubt just feed
              in what the netinfo command prints.  ip  is  the  IPv4  address,
              mask  the netmask, gw the default gateway, dns1 and dns2 are the
              DNS Servers.  If no IP configuration is specified the tool tries
              to  configure  the machine in shared mac address mode with dhcp,
              otherwise in separate mac address mode with static  IP  address.
              Default for dns1 is the gateway address, for dns2 it is 0.0.0.0.

SPECIAL COMMANDS

       Special commands can optionally be specified  for  reset,  powerup  and
       powercycle.  They change the default boot behavior of the machine.

       bios   Asks for the BIOS boot messages being redirected to serial-over-
              lan.

       pxe    Network boot via PXE.

       hd     Boot from local disk.

       hdsafe Boot from local disk (safe mode).

       cd     Boot from CD/DVD.

       diag   Boot in diagnostics mode.

ENVIRONMENT

       AMT_PASSWORD
              AMT password.

       AMT_DEBUG
              Enable debug output.

SEE ALSO

       amtterm(1), gamt(1), amt-howto(7)

AUTHOR

       (c) 2007 Gerd Hoffmann <kraxel@redhat.com>

                           (c) 2007,08 Gerd Hoffmann                amttool(1)