Provided by: gammu_1.26.1-2_i386 bug

NAME

       Gammu - Does some neat things with your cellular phone or modem.

SYNOPSIS

       Usage: gammu [parameters] <command> [options]

DESCRIPTION

       This  program  is a tool for mobile phones. Many vendors and phones are
       supported, for actual listing see <http://cihar.com/gammu/phonedb/>.

OPTIONS

       Parameters before command configure gammu behaviour:
       -c / --config <filename> ... name of configuration file
       -s / --section <confign> ... section of config file to use, eg. 42
       -d / --debug <level> ...  debug  level  (see  gammurc(5)  for  possible
       values)
       -f / --debug-file <filename> ... file for logging debug messages

   Commands
       Commands can be specified with or without leading --.

   Calls
       answercall [ID]
              Answer incoming call.

       cancelcall [ID]
              Cancel incoming call

       canceldiverts
              Cancel all existing call diverts.

       conferencecall ID
              Initiates a conference call.

       dialvoice number [show|hide]
              Make voice call from SIM card line set in phone.

              show|hide  -  optional  parameter whether to disable call number
              indication.

       divert  get|set  all|busy|noans|outofreach  all|voice|fax|data  [number
       timeout]
              Manage or display call diverts.

              get|set - whether to get divert information or to set it.

              all|busy|noans|outofreach - condition when apply divert

              all|voice|fax|data - call type when apply divert

              number - number where to divert

              timeout - timeout when the diversion will happen

       getspeeddial start [stop]
              Gets speed dial choices.

       getussd code
              Retrieves USSD information - dials a service  number  and  reads
              response.

       holdcall ID
              Holds call.

       maketerminatedcall number length [show|hide]
              Make  voice  call  from SIM card line set in phone which will be
              terminated after length seconds.

       monitor [times]
              Get phone status and writes  continuously  to  standard  output.
              Press Ctrl+C to break this state.

       senddtmf sequence
              Plays DTMF sequence. In some phones available only during calls

       splitcall ID
              Splits call.

       switchcall [ID]
              Switches call.

       transfercall [ID]
              Transfers call.

       unholdcall ID
              Unholds call.

   SMS and EMS
       Sending  messages might look a bit complicated on first attempt to use.
       But be patient, the command line has been written  in  order  to  allow
       almost every usage. See EXAMPLE section for some hints on usage.

       There  is  also an option to use gammu-smsd(1) when you want to send or
       receive more messages and process them automatically.

       Common parameters for sendsms and savesms

              -smscset number - SMSC will be taken from  set  number.  Default
              set: 1

              -smscnumber number - SMSC number

              -reply - reply SMSC is set

              -maxnum  number - Limit maximal number of messages which will be
              created. If there are more messages, Gammu will  terminate  with
              failure.

              -folder number - save to specified folder.

              Folders are numerated from 1.

              The  most  often  folder  1  =  "Inbox",  2  = "Outbox",etc. Use
              getsmsfolders to get folder list.

              -unread - makes message unread. In some phones (like  6210)  you
              won’t  see  unread  sms  envelope after saving such sms. In some
              phones with internal SMS memory (like 6210) after using it  with
              folder 1 SIM SMS memory will be used

              -read  -  makes  message  read. In some phones with internal SMS
              memory (like 6210) after using it with folder 1 SIM  SMS  memory
              will be used

              -unsent - makes message unsent

              -sent - makes message sent

              -sender number - set sender number

              -smsname name - set message name

              -sender number - set sender number (default: "Gammu")

              -report - request delivery report for message

              -validity HOUR|6HOURS|DAY|3DAYS|WEEK|MAX - sets how long will be
              the message valid (SMSC will the discard the message after  this
              time if it could not deliver it).

              -save - will also save message which is being sent

       addsms folder file [-yes]
              Adds  SMSes  from  file (format like backupsms uses) to selected
              folder in phone.

       addsmsfolder name

       backupsms file [-yes|-all]
              Stores all SMSes from phone to file.

              Use -yes for answering yes to all questions (backup all messages
              and  delete them from phone), or -all to just backup all folders
              while keeping messages in phone.

       deleteallsms folder
              Delete all SMS from specified SMS folder.

       deletesms folder start [stop]
              Delete SMS from phone. See description for getsms for info about
              sms folders naming convention.

              Locations are numerated from 1.

       displaysms ... (options like in sendsms)

              Displays  PDU  data  of  encoded  SMS  messages. It accepts same
              parameters and behaves same like sendsms.

       getallsms -pbk
              Get all SMS from phone. In some phones you will  have  also  SMS
              templates  and info about locations used to save Picture Images.
              With each sms you will see location. If you want to get such sms
              from phone alone, use gammu getsms 0 location

       geteachsms -pbk
              Similiary   to   getallsms.   Difference   is,  that  links  all
              contacenated sms

       getsms folder start [stop]
              Get SMS.

              Locations are numerated from 1.

              When give folder 0, sms is given from  "flat"  memory  (all  sms
              from  all  folders have unique numbers). It’s sometimes emulated
              by Gammu. You can use it with all phones.

              When give folder 1, 2, etc. sms are taken  from  Inbox,  Outbox,
              etc.   and  each  sms  has  unique number in his folder. Name of
              folders can depend on your  phone  (the  most  often  1="Inbox",
              2="Outbox",  etc.).   This method is not supported by all phones
              (for example, not supported by Nokia 3310, 5110, 6110). If  work
              with your phone, use getsmsfolders to get folders list.

       getsmsc [start [stop]]
              Get SMSC settings from SIM card.

              Locations are numerated from 1.

       getsmsfolders
              Get names for SMS folders in phone

       nokiagett9

       restoresms file [-yes]
              Restores  SMSes  from  file  (format  like  backupsms  uses)  to
              selected folder in  phone.  Please  note  that  this  overwrites
              existing messages in phone (if it supports it).

       savesms  ANIMATION frames file1 file2... [-folder id] [-unread] [-read]
       [-unsent] [-sent] [-sender number] [-smsname  name]  [-smscset  number]
       [-smscnumber number] [-reply] [-maxsms num]
              Save  an  animation  as a SMS. You need to give number of frames
              and picture for each frame. Each picture can be in  any  picture
              format which Gammu supports (B/W bmp, gif, wbmp, nol, nlm...).

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       savesms BOOKMARK file location [-folder id] [-unread] [-read] [-unsent]
       [-sent] [-sender number] [-smsname name] [-smscset number] [-smscnumber
       number] [-reply] [-maxsms num]
              Read WAP bookmark from file created by backup option  and  saves
              in Nokia format as SMS

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       savesms CALENDAR file location [-folder id] [-unread] [-read] [-unsent]
       [-sent] [-sender number] [-smsname name] [-smscset number] [-smscnumber
       number] [-reply] [-maxsms num]
              Read calendar note from file created by backup option and  saves
              in VCALENDAR 1.0 format as SMS.

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       savesms CALLER file [-folder id] [-unread]  [-read]  [-unsent]  [-sent]
       [-sender number] [-smsname name] [-smscset number] [-smscnumber number]
       [-reply] [-maxsms num]
              Save caller logo as sms (Nokia format - size 72x14).

              For description of shared parameters see Common  parameters  for
              sendsms and savesms.

       savesms  EMS  [-folder id] [-unread] [-read] [-unsent] [-sent] [-sender
       number] [-smsname name] [-smscset number] [-smscnumber number] [-reply]
       [-maxsms  num]  [-unicode]  [-16bit]  [-format  lcrasbiut] [-text text]
       [-unicodefiletext file]  [-defsound  ID]  [-defanimation  ID]  [-tone10
       file]  [-tone10long  file]  [-tone12  file] [-tone12long file] [-toneSE
       file] [-toneSElong file]  [-fixedbitmap  file]  [-variablebitmap  file]
       [-variablebitmaplong  file]  [-animation  frames file1 ...] [-protected
       number]

              Saves   EMS   sequence.   All  parameters  after  -unread  (like
              -defsound) can be used few times.

              -text - adds text

              -unicodefiletext - adds text from Unicode file

              -defanimation - adds default  animation  with  ID  specified  by
              user.ID for different phones are different.

              -animation - adds "frames" frames read from file1, file2, etc.

              -defsound - adds default sound with ID specified by user. ID for
              different phones are different.

              -tone10 - adds IMelody version  1.0  read  from  RTTL  or  other
              compatible file

              -tone10long  -  IMelody version 1.0 saved in one of few SMS with
              UPI. Phones compatible with UPI (like SonyEricsson phones)  will
              read such ringtone as one

              -tone12  -  adds  IMelody  version  1.2  read from RTTL or other
              compatible file

              -tone12long - IMelody version 1.2 saved in one of few  SMS  with
              UPI.  Phones compatible with UPI (like SonyEricsson phones) will
              read such ringtone as one

              -toneSE - adds IMelody in "short" form supported by SonyEricsson
              phones

              -variablebitmap - bitmap in any size saved in one SMS

              -variablebitmaplong  -  bitmap with maximal size 96x128 saved in
              one or few sms

              -fixedbitmap  - bitmap 16x16 or 32x32

              -protected - all ringtones  and  bitmaps  after  this  parameter
              (excluding  default ringtones and logos) will be "protected" (in
              phones compatible with ODI like SonyEricsson products  it  won’t
              be possible to forward them from phone menu)

              Example:  gammu  savesms EMS -text "Greetings" -defsound 1 -text
              "from Gammu" -tone10 axelf.txt -animation 2 file1.bmp file2.bmp

              will create EMS sequence with text "Greetings" and default sound
              1  and  text  "from  Gammu"  and  ringtone axelf.txt and 2 frame
              animation read from (1’st  frame)  file1.bmp  and  (2’nd  frame)
              file2.bmp

              Example:  gammu  savesms  EMS  -protected  2 -variablebitmaplong
              ala.bmp -toneSElong axelf.txt -toneSE ring.txt

              ala.bmp and axelf.txt will be "protected"

              For description of shared parameters see Common  parameters  for
              sendsms and savesms.

       savesms  MMSINDICATOR  URL  Title Sender [-folder id] [-unread] [-read]
       [-unsent] [-sent] [-sender number] [-smsname  name]  [-smscset  number]
       [-smscnumber number] [-reply] [-maxsms num]

              Saves  a  message  with MMS indication. The recipient phone will
              then download MMS from given URL and display it.

              Please note that you should provide valid smil data on that URL.

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       savesms MMSSETTINGS  file  location   [-folder  id]  [-unread]  [-read]
       [-unsent]  [-sent]  [-sender  number] [-smsname name] [-smscset number]
       [-smscnumber number] [-reply] [-maxsms num]
              Saves a message with MMS configuration. The  configuration  will
              be read from Gammu backup file from given location.

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       savesms OPERATOR file [-folder id] [-unread] [-read] [-unsent]  [-sent]
       [-sender number] [-smsname name] [-smscset number] [-smscnumber number]
       [-reply] [-maxsms num] [-netcode netcode] [-biglogo]
              Save operator logo as sms (Nokia format - size  72x14  or  78x21
              after using -biglogo).

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       savesms PICTURE file [-folder id] [-unread] [-read]  [-unsent]  [-sent]
       [-sender number] [-smsname name] [-smscset number] [-smscnumber number]
       [-reply] [-maxsms num] [-text text] [-unicode] [-alcatelbmmi]
              Save Picture Image as sms (Nokia format - size 72x28).

              For description of shared parameters see Common  parameters  for
              sendsms and savesms.

       savesms  PROFILE  [-folder  id]  [-unread]  [-read]  [-unsent]  [-sent]
       [-sender number] [-smsname name] [-smscset number] [-smscnumber number]
       [-reply]   [-maxsms  num]  [-name  name]  [-bitmap  bitmap]  [-ringtone
       ringtone]
              Read  ringtone (RTTL) format and bitmap (Picture Image size) and
              name and save as Nokia profile.

              For description of shared parameters see Common  parameters  for
              sendsms and savesms.

       savesms  RINGTONE file [-folder id] [-unread] [-read] [-unsent] [-sent]
       [-sender number] [-smsname name] [-smscset number] [-smscnumber number]
       [-reply] [-maxsms num] [-long] [-scale]
              Read  RTTL  ringtone  from  file  and save as SMS into SIM/phone
              memory. Ringtone is saved in Nokia format.

              -long - ringtone is saved using Profile style. It can be  longer
              (and  saved  in  2  SMS), but decoded only by newer phones (like
              33xx)

              -scale - ringtone will have Scale info for each  note.  It  will
              allow to edit it correctly later in phone composer (for example,
              in 33xx)

              For description of shared parameters see Common  parameters  for
              sendsms and savesms.

       savesms  SMSTEMPLATE  [-folder  id] [-unread] [-read] [-unsent] [-sent]
       [-sender number] [-smsname name] [-smscset number] [-smscnumber number]
       [-reply]  [-maxsms num] [-unicode] [-text text] [-unicodefiletext file]
       [-defsound ID] [-defanimation ID]  [-tone10  file]  [-tone10long  file]
       [-tone12  file]  [-tone12long  file]  [-toneSE file] [-toneSElong file]
       [-variablebitmap file] [-variablebitmaplong  file]  [-animation  frames
       file1 ...]
              Saves a SMS template (for Alcatel phones).

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       savesms TEXT [-folder id] [-unread] [-read] [-unsent] [-sent]  [-sender
       number] [-smsname name] [-smscset number] [-smscnumber number] [-reply]
       [-maxsms num] [-inputunicode] [-16bit] [-flash]  [-len  len]  [-autolen
       len]    [-unicode]    [-enablevoice]    [-disablevoice]    [-enablefax]
       [-disablefax]      [-enableemail]      [-disableemail]       [-voidsms]
       [-replacemessages  ID]  [-replacefile  file] [-text msgtext] [-textutf8
       msgtext]
              Take text from stdin (or commandline  if  -text  specified)  and
              save as text SMS into SIM/phone memory.

              -flash - Class 0 SMS

              -len  len  - specify, how many chars will be read. When use this
              option and text will be longer than 1 SMS, will be splitted into
              more linked SMS

              -autolen  len  -  specify, how many chars will be read. When use
              this option and text will be longer than 1 SMS, will be splitted
              into  more linked SMS.Coding type (SMS default alphabet/Unicode)
              is set according to input text

              -enablevoice | -disablevoice  |  -enablefax   |  -disablefax   |
              -enableemail   |  -disableemail  - sms will set such indicators.
              Text will be cut to 1 sms.

              -voidsms  -  many  phones  after  receiving  it  won’t   display
              anything,  only beep, vibrate or turn on light. Text will be cut
              to 1 sms.

              -unicode - SMS will be saved in Unicode format

              -inputunicode - input text is in Unicode.

              -text - get text from command line instead of stdin.

              -textutf8 - get text in  UTF-8  from  command  line  instead  of
              stdin.

              TIP:  You  can  create  Unicode  file  using  WordPad in Windows
              (during saving select "Unicode Text Document" format).  In  Unix
              can use for example YUdit.

              -replacemessages  ID  - ID can be 1..7. When you will use option
              and send more single SMS to one recipient with the same ID, each
              another SMS will replace each previous with the same ID

              -replacefile  file   -  when you want, you can make file in such
              format:          src_unicode_char1,          dest_unicode_char1,
              src_unicode_char2,  dest_unicode_char2 (everything in one line).
              After reading text  for  SMS  from  stdin  there  will  be  made
              translation and each src char will be converted to dest char. In
              docs there is example file (replace.txt), which will change  all
              "a" chars to "1"

              TIP:  when  use  ~ char in sms text and -unicode option (Unicode
              coding required), text of sms after ~ char will  blink  in  some
              phones (like N33xx)

              Example: echo some_text | gammu savesms TEXT

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       savesms TODO file location [-folder  id]  [-unread]  [-read]  [-unsent]
       [-sent] [-sender number] [-smsname name] [-smscset number] [-smscnumber
       number] [-reply] [-maxsms num]
              Saves a message with a todo entry. The content will be read from
              any  backup format which Gammu supports and from given location.

              For description of shared parameters see Common  parameters  for
              sendsms and savesms.

       savesms  VCARD10|VCARD21  file  SM|ME  location  [-nokia]  [-folder id]
       [-unread] [-read] [-unsent] [-sent] [-sender  number]  [-smsname  name]
       [-smscset number] [-smscnumber number] [-reply] [-maxsms num]
              Read  phonebook  entry  from  file  created by backup option and
              saves in VCARD 1.0 (only name and default number) or  VCARD  2.1
              (all  entry  details  with all numbers, text and name) format as
              SMS

              For description of shared parameters see Common  parameters  for
              sendsms and savesms.

       savesms WAPINDICATOR URL Title [-folder id] [-unread] [-read] [-unsent]
       [-sent] [-sender number] [-smsname name] [-smscset number] [-smscnumber
       number] [-reply] [-maxsms num]
              Saves a SMS with a WAP indication for given URL and title.

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       savesms WAPSETTINGS file  location  DATA|GPRS  [-folder  id]  [-unread]
       [-read]  [-unsent]  [-sent]  [-sender number] [-smsname name] [-smscset
       number] [-smscnumber number] [-reply] [-maxsms num]
              Read WAP settings from file created by backup option  and  saves
              in Nokia format as SMS

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       sendsms  ANIMATION  destination   frames   file1   file2...   [-report]
       [-validity  HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]  [-save  [-folder  number]]
       [-smscset number] [-smscnumber number] [-reply] [-maxsms num]
              Sends a message, for description of message specific  parameters
              see savesms ANIMATION.

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       sendsms  BOOKMARK  destination  file  location   [-report]   [-validity
       HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]   [-save  [-folder  number]]  [-smscset
       number] [-smscnumber number] [-reply] [-maxsms num]
              Sends a message, for description of message specific  parameters
              see savesms BOOKMARK.

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       sendsms  CALENDAR  destination  file  location   [-report]   [-validity
       HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]   [-save  [-folder  number]]  [-smscset
       number] [-smscnumber number] [-reply] [-maxsms num]
              Sends a message, for description of message specific  parameters
              see savesms CALENDAR.

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       sendsms    CALLER     destination     file     [-report]     [-validity
       HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]   [-save  [-folder  number]]  [-smscset
       number] [-smscnumber number] [-reply] [-maxsms num]
              Sends a message, for description of message specific  parameters
              see savesms CALLER.

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       sendsms       EMS        destination        [-report]        [-validity
       HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]   [-save  [-folder  number]]  [-smscset
       number] [-smscnumber number] [-reply] [-maxsms num] [-unicode] [-16bit]
       [-format lcrasbiut] [-text text] [-unicodefiletext file] [-defsound ID]
       [-defanimation ID] [-tone10 file]  [-tone10long  file]  [-tone12  file]
       [-tone12long  file]  [-toneSE  file]  [-toneSElong  file] [-fixedbitmap
       file] [-variablebitmap  file]  [-variablebitmaplong  file]  [-animation
       frames file1 ...] [-protected number]
              Sends a message, for description of message specific  parameters
              see savesms EMS.

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       sendsms MMSINDICATOR destination URL Title Sender [-report]  [-validity
       HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]   [-save  [-folder  number]]  [-smscset
       number] [-smscnumber number] [-reply] [-maxsms num]
              Sends a message, for description of message specific  parameters
              see savesms MMSINDICATOR.

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       sendsms MMSSETTINGS  destination  file  location  [-report]  [-validity
       HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]   [-save  [-folder  number]]  [-smscset
       number] [-smscnumber number] [-reply] [-maxsms num]
              Sends a message, for description of message specific  parameters
              see savesms MMSSETTINGS.

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       sendsms    OPERATOR    destination    file     [-report]     [-validity
       HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]   [-save  [-folder  number]]  [-smscset
       number] [-smscnumber number] [-reply] [-maxsms num] [-netcode  netcode]
       [-biglogo]
              Sends a message, for description of message specific  parameters
              see savesms OPERATOR.

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       sendsms    PICTURE    destination     file     [-report]     [-validity
       HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]   [-save  [-folder  number]]  [-smscset
       number]  [-smscnumber  number]  [-reply]  [-maxsms  num]  [-text  text]
       [-unicode] [-alcatelbmmi]
              Sends a message, for description of message specific  parameters
              see savesms PICTURE.

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       sendsms      PROFILE       destination       [-report]       [-validity
       HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]   [-save  [-folder  number]]  [-smscset
       number]  [-smscnumber  number]  [-reply]  [-maxsms  num]  [-name  name]
       [-bitmap bitmap] [-ringtone ringtone]
              Sends a message, for description of message specific  parameters
              see savesms PROFILE.

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       sendsms    RINGTONE    destination    file     [-report]     [-validity
       HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]   [-save  [-folder  number]]  [-smscset
       number] [-smscnumber number] [-reply] [-maxsms num] [-long] [-scale]
              Sends a message, for description of message specific  parameters
              see savesms RINGTONE.

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       sendsms     SMSTEMPLATE      destination      [-report]      [-validity
       HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]   [-save  [-folder  number]]  [-smscset
       number] [-smscnumber number] [-reply] [-maxsms num]  [-unicode]  [-text
       text]   [-unicodefiletext   file]  [-defsound  ID]  [-defanimation  ID]
       [-tone10 file] [-tone10long file]  [-tone12  file]  [-tone12long  file]
       [-toneSE    file]    [-toneSElong    file]    [-variablebitmap    file]
       [-variablebitmaplong file] [-animation frames file1 ...]
              Sends a message, for description of message specific  parameters
              see savesms SMSTEMPLATE.

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       sendsms       TEXT       destination        [-report]        [-validity
       HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]   [-save  [-folder  number]]  [-smscset
       number] [-smscnumber number]  [-reply]  [-maxsms  num]  [-inputunicode]
       [-16bit]  [-flash]  [-len len] [-autolen len] [-unicode] [-enablevoice]
       [-disablevoice]     [-enablefax]      [-disablefax]      [-enableemail]
       [-disableemail]  [-voidsms]  [-replacemessages  ID] [-replacefile file]
       [-text msgtext] [-textutf8 msgtext]
              Sends a message, for description of message specific  parameters
              see savesms TEXT.

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       sendsms   TODO   destination   file   location   [-report]   [-validity
       HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]   [-save  [-folder  number]]  [-smscset
       number] [-smscnumber number] [-reply] [-maxsms num]
              Sends a message, for description of message specific  parameters
              see savesms TODO.

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       sendsms  VCARD10|VCARD21  destination  file  SM|ME  location   [-nokia]
       [-report]  [-validity  HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]  [-save [-folder
       number]] [-smscset number] [-smscnumber number] [-reply] [-maxsms num]
              Sends a message, for description of message specific  parameters
              see savesms VCARD10|VCARD21.

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       sendsms  WAPINDICATOR  destination  URL  Title   [-report]   [-validity
       HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]   [-save  [-folder  number]]  [-smscset
       number] [-smscnumber number] [-reply] [-maxsms num]
              Sends a message, for description of message specific  parameters
              see savesms WAPINDICATOR.

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       sendsms  WAPSETTINGS  destination  file  location  DATA|GPRS  [-report]
       [-validity  HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]  [-save  [-folder  number]]
       [-smscset number] [-smscnumber number] [-reply] [-maxsms num]
              Sends a message, for description of message specific  parameters
              see savesms WAPSETTINGS.

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       setsmsc location number
              Set SMSC settings on SIM card. This keeps all SMSC configuration
              intact, it just changes the SMSC number.

              Locations are numerated from 1.

   Memory (phonebooks and calls)
       addcategory TODO|PHONEBOOK text

       addnew file [-yes]
              Adds  data  written  in  file  created  using backup option. All
              things backup’ed by backup can be restored (when made backup  to
              Gammu text file).

              Please  note  that this adds all content of backup file to phone
              and does not care about current data in the phone (no duplicates
              are detected).

       backup file [-yes]
              Backup  your  phone to file. It’s possible to backup (depends on
              phone and backup format):

              * phonebook from SIM and phone memory
              * calendar notes
              * SMSC settings
              * operator logo
              * startup (static) logo or startup text
              * WAP bookmarks
              * WAP settings
              * caller logos and groups
              * user ringtones

              There are various backup formats supported and the backup format
              is guessed based on file extension:

              *  .lmb  -  Nokia  backup,  supports  contacts, caller logos and
              startup logo.
              * .vcs - vCalendar, supports calendar and todo.
              * .vcf - vCard, supports contacts.
              * .ldif - LDAP import, supports contacts.
              * .ics - iCalendar, supports calendar and todo.
              * Any other extension is Gammu backup file and it  supports  all
              data mentioned above.

              See  EXAMPLE section for some hints on manipulating Gammu backup
              format.

       clearall
              Deletes all private data from the phone.

       deleteallmemory DC|MC|RC|ON|VM|SM|ME|MT|FD|SL
              Deletes all entries from specified memory type.

       deletememory DC|MC|RC|ON|VM|SM|ME|MT|FD|SL start [stop]
              Deletes entries in specified range from specified memory type.

       getallcategory TODO|PHONEBOOK

       getallmemory DC|MC|RC|ON|VM|SM|ME|MT|FD|SL
              Get all memory  locations  from  phone.  For  memory  types  see
              getmemory.

       getcategory TODO|PHONEBOOK start [stop]

       getmemory DC|MC|RC|ON|VM|SM|ME|MT|FD|SL start [stop [-nonempty]]
              Get memory location from phone.

              Locations are numerated from 1.

              DC = Dialled calls
              MC = Missed calls
              RC = Received calls
              ON = Own numbers
              VM = voice mailbox
              SM = SIM phonebook
              ME = phone internal phonebook
              FD = fixed dialling
              SL = sent SMS log

       getspeeddial start [stop]
              Gets speed dial choices.

       listmemorycategory text|number

       nokiagetpbkfeatures memorytype

       restore file [-yes]
              Restore settings written in file created using backup option.

              Please note that restoring deletes all current content in phone.
              If you want only to add entries to phone, use addnew.

              In some phones restoring calendar notes will not show error, but
              won’t be done, when phone doesn’t have set clock inside.

       savefile VCARD10|VCARD21 target.vcf file SM|ME location
              Allows  to  convert  between  various backup formats which gammu
              supports for phonebook events. The file  type  is  guessed  (for
              input  file  guess  is  based on extension and file content, for
              output solely on extension).

              For example if you want  to  convert  single  entry  from  gammu
              native backup to vCard, you need following command:

                  gammu savefile CALENDAR output.vcf myPhonebook.backup ME 42

       savesms  VCARD10|VCARD21  file  SM|ME  location  [-nokia]  [-folder id]
       [-unread] [-read] [-unsent] [-sent] [-sender  number]  [-smsname  name]
       [-smscset number] [-smscnumber number] [-reply] [-maxsms num]
              Read  phonebook  entry  from  file  created by backup option and
              saves in VCARD 1.0 (only name and default number) or  VCARD  2.1
              (all  entry  details  with all numbers, text and name) format as
              SMS

              For description of shared parameters see Common  parameters  for
              sendsms and savesms.

       searchmemory text
              Scans  all  memory  entries  for  given  text.  It performs case
              insensitive substring lookup. You  can  interrupt  searching  by
              pressing Ctrl+C.

       sendsms   VCARD10|VCARD21  destination  file  SM|ME  location  [-nokia]
       [-report] [-validity  HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]  [-save  [-folder
       number]] [-smscset number] [-smscnumber number] [-reply] [-maxsms num]
              Sends  a message, for description of message specific parameters
              see savesms VCARD10|VCARD21.

              For description of shared parameters see Common  parameters  for
              sendsms and savesms.

   Filesystem
       Gammu  allows  to access phones using native protocol (Nokias) or OBEX.
       Your phone can also support  usb  storage,  which  is  handled  on  the
       operating system level and Gammu does not use that.

       addfile folderID name [-type JAR|BMP|PNG|GIF|JPG|MIDI|WBMP|AMR|3GP|NRT]
       [-readonly] [-protected] [-system] [-hidden] [-newtime]
              Add file with specified name to folder with specified folder ID.

              -type - file type was required for filesystem 1 in Nokia  phones
              (current filesystem 2 doesn’t need this)

              -readonly,  -protected, -system, -hidden - you can set readonly,
              protected (file can’t be for example forwarded from phone menu),
              system  and  hidden  (file  is  hidden  from  phone  menu)  file
              attributes

              -newtime - after using it date/time of file modification will be
              set to moment of uploading

       addfolder parentfolderID name
              Create  a  folder  in phone with specified name in a folder with
              specified folder ID.

       deletefiles fileID
              Delete files with given IDs.

       deletefolder name
              Delete folder with given ID.

       getfilefolder ID1, ID2, ...
              Retrieve files or all files from folder with given  IDs  from  a
              phone filesytem.

       getfiles ID1, ID2, ...
              Retrieve files with given IDs from a phone filesytem.

       getfilesystem [-flatall|-flat]
              Display  info about all folders and files in phone memory/memory
              card. By default there is tree displayed, you can change it:

              -flatall there are displayed full file/folder  details  like  ID
              (first parameter in line)

              -flat

              Please  note,  that  in some phones (like N6230) content of some
              folders (with more files) can be cut (only part of files will be
              displayed) for example on infrared connection. This is not Gammu
              issue, but phone firmware problem.

       getfilesystemstatus
              Display info filesystem status - number of bytes available, used
              or used by some specific content.

       getfolderlisting folderID

              Display  files and folders available in folder with given folder
              ID. You can get ID’s using getfilesystem -flatall.

              Please note, that in some phones (like N6230)  content  of  some
              folders (with more files) can be cut (only part of files will be
              displayed) for example on infrared connection. This is not Gammu
              issue, but phone firmware problem.

       getrootfolders

              Display info about drives available in phone/memory card.

       nokiaaddfile
       Gallery|Gallery2|Camera|Tones|Tones2|Records|Video|Playlist|MemoryCard
       file   [-name   name]   [-protected]  [-readonly]  [-system]  [-hidden]
       [-newtime]
              Install the *.jar/*.jad file pair of a midlet in the application
              or game menu of the phone. You have to give the name without the
              jar/jad  suffix,  otherwise  you will get the slightly confusing
              error message Can’t open specified file. Read only ?

              The option -overwrite deletes the application’s  .jad  and  .jar
              files bevor installing, but doesn’t delete the application data.
              Option -overwriteall will  also  delete  all  data.  Both  these
              options work only for Application or Game upload.

              Example:   gammu   nokiaaddfile   Application  Alien  will  read
              Alien.JAD and Alien.JAR and add to Applications

              Example: gammu nokiaaddfile Tones file.mid  will  read  file.mid
              and add to Tones folder

              You  can  use  jadmaker(1)  to  generate a .jad file from a .jar
              file.

       nokiaaddplaylists

       sendfile name
              Sends file to a phone. It’s up to phone to decide where to store
              this  file and how to handle it (for example when you send vCard
              or vCalendar, most of phones will offer you to import it.

       setfileattrib folderID [-system] [-readonly] [-hidden] [-protected]

   Logo and pictures
       copybitmap inputfile [outputfile [OPERATOR|PICTURE|STARTUP|CALLER]]
              Allow  to  convert  logos  files  to  another.  When  give  ONLY
              inputfile,  output  will  be  written to stdout using ASCII art.
              When give output file and format, in  some  file  formats  (like
              NLM) will be set indicator informing about logo type to given.

       getbitmap DEALER
              In  some models it’s possible to save dealer welcome note - text
              displayed during enabling phone,  which  can’t  be  edited  from
              phone menu.  Here you can get it.

       getbitmap CALLER location [file]
              Get caller group logo from phone. Locations 1-5.

       getbitmap OPERATOR [file]
              Get  operator  logo (picture displayed instead of operator name)
              from phone.

       getbitmap PICTURE location [file]
              Get Picture Image from phone.

       getbitmap STARTUP [file]
              Get static startup logo from phone. Allow to save it in file.

       savesms ANIMATION frames file1 file2... [-folder id] [-unread]  [-read]
       [-unsent]  [-sent]  [-sender  number] [-smsname name] [-smscset number]
       [-smscnumber number] [-reply] [-maxsms num]
              Save an animation as a SMS. You need to give  number  of  frames
              and  picture  for each frame. Each picture can be in any picture
              format which Gammu supports (B/W bmp, gif, wbmp, nol, nlm...).

              For description of shared parameters see Common  parameters  for
              sendsms and savesms.

       savesms  CALLER  file  [-folder id] [-unread] [-read] [-unsent] [-sent]
       [-sender number] [-smsname name] [-smscset number] [-smscnumber number]
       [-reply] [-maxsms num]
              Save caller logo as sms (Nokia format - size 72x14).

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       savesms OPERATOR file [-folder id] [-unread] [-read] [-unsent]  [-sent]
       [-sender number] [-smsname name] [-smscset number] [-smscnumber number]
       [-reply] [-maxsms num] [-netcode netcode] [-biglogo]
              Save operator logo as sms (Nokia format - size  72x14  or  78x21
              after using -biglogo).

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       savesms PICTURE file [-folder id] [-unread] [-read]  [-unsent]  [-sent]
       [-sender number] [-smsname name] [-smscset number] [-smscnumber number]
       [-reply] [-maxsms num] [-text text] [-unicode] [-alcatelbmmi]
              Save Picture Image as sms (Nokia format - size 72x28).

              For description of shared parameters see Common  parameters  for
              sendsms and savesms.

       sendsms   ANIMATION   destination   frames   file1  file2...  [-report]
       [-validity  HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]  [-save  [-folder  number]]
       [-smscset number] [-smscnumber number] [-reply] [-maxsms num]
              Sends  a message, for description of message specific parameters
              see savesms ANIMATION.

              For description of shared parameters see Common  parameters  for
              sendsms and savesms.

       sendsms     CALLER     destination     file     [-report]    [-validity
       HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]  [-save  [-folder  number]]   [-smscset
       number] [-smscnumber number] [-reply] [-maxsms num]
              Sends  a message, for description of message specific parameters
              see savesms CALLER.

              For description of shared parameters see Common  parameters  for
              sendsms and savesms.

       sendsms     OPERATOR     destination    file    [-report]    [-validity
       HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]  [-save  [-folder  number]]   [-smscset
       number]  [-smscnumber number] [-reply] [-maxsms num] [-netcode netcode]
       [-biglogo]
              Sends  a message, for description of message specific parameters
              see savesms OPERATOR.

              For description of shared parameters see Common  parameters  for
              sendsms and savesms.

       sendsms     PICTURE     destination     file    [-report]    [-validity
       HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]  [-save  [-folder  number]]   [-smscset
       number]  [-smscnumber  number]  [-reply]  [-maxsms  num]  [-text  text]
       [-unicode] [-alcatelbmmi]
              Sends  a message, for description of message specific parameters
              see savesms PICTURE.

              For description of shared parameters see Common  parameters  for
              sendsms and savesms.

       setbitmap CALLER location [file]
              Set caller logo.

       setbitmap COLOUROPERATOR [fileID [netcode]]

       setbitmap COLOURSTARTUP [fileID]

       setbitmap DEALER text

       setbitmap OPERATOR [file [netcode]]
              Set  operator  logo  in phone. When won’t give file and netcode,
              operator logo will be removed from phone. When  will  give  only
              filename,  operator  logo will be displayed for your current GSM
              operator.  When  give  additionaly  network  code,  it  will  be
              displayed  for this operator: gammu setbitmap OPERATOR file "260
              02"

       setbitmap PICTURE file location [text]

       setbitmap STARTUP file|1|2|3
              Set startup logo in phone. It can be static (then you will  have
              to  give  file  name)  or  one of predefined animated (only some
              phones like Nokia 3310 or 3330 supports it)

       setbitmap TEXT text

       setbitmap WALLPAPER fileID

   Ringtones
       Ringtones are mostly supported only for older phones. For recent phones
       you usually just upload them to some folder in phone filesystem.

       addnew file [-yes]
              Adds  data  written  in  file  created  using backup option. All
              things backup’ed by backup can be restored (when made backup  to
              Gammu text file).

              Please  note  that this adds all content of backup file to phone
              and does not care about current data in the phone (no duplicates
              are detected).

       backup file [-yes]
              Backup  your  phone to file. It’s possible to backup (depends on
              phone and backup format):

              * phonebook from SIM and phone memory
              * calendar notes
              * SMSC settings
              * operator logo
              * startup (static) logo or startup text
              * WAP bookmarks
              * WAP settings
              * caller logos and groups
              * user ringtones

              There are various backup formats supported and the backup format
              is guessed based on file extension:

              *  .lmb  -  Nokia  backup,  supports  contacts, caller logos and
              startup logo.
              * .vcs - vCalendar, supports calendar and todo.
              * .vcf - vCard, supports contacts.
              * .ldif - LDAP import, supports contacts.
              * .ics - iCalendar, supports calendar and todo.
              * Any other extension is Gammu backup file and it  supports  all
              data mentioned above.

              See  EXAMPLE section for some hints on manipulating Gammu backup
              format.

       clearall
              Deletes all private data from the phone.

       copyringtone source destination [RTTL|BINARY]
              Copy source ringtone to destination.

       getphoneringtone location [file]

              Get one of "default" ringtones and saves into file

       getringtone location [file]
              Get ringtone from phone in RTTL or BINARY format.

              Locations are numerated from 1.

       getringtoneslist

       nokiacomposer file
              Show, how to enter RTTL ringtone in composer  existing  in  many
              Nokia phones (and how should it look like).

       playringtone file
              Play  aproximation of ringtone over phone buzzer. File can be in
              RTTL or BINARY (Nokia DCT3) format.

       playsavedringtone number

              Play one of "built" ringtones. This option is available for DCT4
              phones. For getting ringtones list use getringtoneslist.

       restore file [-yes]
              Restore settings written in file created using backup option.

              Please note that restoring deletes all current content in phone.
              If you want only to add entries to phone, use addnew.

              In some phones restoring calendar notes will not show error, but
              won’t be done, when phone doesn’t have set clock inside.

       savesms  RINGTONE file [-folder id] [-unread] [-read] [-unsent] [-sent]
       [-sender number] [-smsname name] [-smscset number] [-smscnumber number]
       [-reply] [-maxsms num] [-long] [-scale]
              Read  RTTL  ringtone  from  file  and save as SMS into SIM/phone
              memory. Ringtone is saved in Nokia format.

              -long - ringtone is saved using Profile style. It can be  longer
              (and  saved  in  2  SMS), but decoded only by newer phones (like
              33xx)

              -scale - ringtone will have Scale info for each  note.  It  will
              allow to edit it correctly later in phone composer (for example,
              in 33xx)

              For description of shared parameters see Common  parameters  for
              sendsms and savesms.

       sendsms     RINGTONE     destination    file    [-report]    [-validity
       HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]  [-save  [-folder  number]]   [-smscset
       number] [-smscnumber number] [-reply] [-maxsms num] [-long] [-scale]
              Sends  a message, for description of message specific parameters
              see savesms RINGTONE.

              For description of shared parameters see Common  parameters  for
              sendsms and savesms.

       setringtone file [-location location] [-scale] [-name name]
              Set  ringtone  in  phone.  When  don’t give location, it will be
              written "with preview" (in phones supporting this  feature  like
              61xx  or  6210).  When use RTTL ringtones, give location and use
              -scale, there will be written scale info with each note. It will
              avoid  scale  problems  available  during  editing  ringtone  in
              composer from phone menu (for example, in N33xx).

              TIP: when use ~ char in ringtone  name,  in  some  phones  (like
              33xx) name will blink later in phone menus

   Calendar notes
       addnew file [-yes]
              Adds  data  written  in  file  created  using backup option. All
              things backup’ed by backup can be restored (when made backup  to
              Gammu text file).

              Please  note  that this adds all content of backup file to phone
              and does not care about current data in the phone (no duplicates
              are detected).

       backup file [-yes]
              Backup  your  phone to file. It’s possible to backup (depends on
              phone and backup format):

              * phonebook from SIM and phone memory
              * calendar notes
              * SMSC settings
              * operator logo
              * startup (static) logo or startup text
              * WAP bookmarks
              * WAP settings
              * caller logos and groups
              * user ringtones

              There are various backup formats supported and the backup format
              is guessed based on file extension:

              *  .lmb  -  Nokia  backup,  supports  contacts, caller logos and
              startup logo.
              * .vcs - vCalendar, supports calendar and todo.
              * .vcf - vCard, supports contacts.
              * .ldif - LDAP import, supports contacts.
              * .ics - iCalendar, supports calendar and todo.
              * Any other extension is Gammu backup file and it  supports  all
              data mentioned above.

              See  EXAMPLE section for some hints on manipulating Gammu backup
              format.

       clearall
              Deletes all private data from the phone.

       deletecalendar start [stop]
              Deletes selected calendar entries in phone.

       getallcalendar
              Retrieves all calendar entries from phone.

       getcalendar start [stop]
              Retrieves selected calendar entries from phone.

       getcalendarsettings
              Displays calendar settings like first day of week  or  automatic
              deleting of old entries.

       restore file [-yes]
              Restore settings written in file created using backup option.

              Please note that restoring deletes all current content in phone.
              If you want only to add entries to phone, use addnew.

              In some phones restoring calendar notes will not show error, but
              won’t be done, when phone doesn’t have set clock inside.

       savefile CALENDAR target.vcs file location
              Allows  to  convert  between  various backup formats which gammu
              supports for calendar events. The  file  type  is  guessed  (for
              input  file  guess  is  based on extension and file content, for
              output solely on extension).

              For example if you want  to  convert  single  entry  from  gammu
              native backup to vCalendar, you need following command:

                  gammu savefile CALENDAR output.vcs myCalendar.backup 260

       savesms CALENDAR file location [-folder id] [-unread] [-read] [-unsent]
       [-sent] [-sender number] [-smsname name] [-smscset number] [-smscnumber
       number] [-reply] [-maxsms num]
              Read  calendar note from file created by backup option and saves
              in VCALENDAR 1.0 format as SMS.

              For description of shared parameters see Common  parameters  for
              sendsms and savesms.

       sendsms   CALENDAR   destination  file  location  [-report]  [-validity
       HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]  [-save  [-folder  number]]   [-smscset
       number] [-smscnumber number] [-reply] [-maxsms num]
              Sends  a message, for description of message specific parameters
              see savesms CALENDAR.

              For description of shared parameters see Common  parameters  for
              sendsms and savesms.

   To do lists
       addcategory TODO|PHONEBOOK text

       addnew file [-yes]
              Adds  data  written  in  file  created  using backup option. All
              things backup’ed by backup can be restored (when made backup  to
              Gammu text file).

              Please  note  that this adds all content of backup file to phone
              and does not care about current data in the phone (no duplicates
              are detected).

       backup file [-yes]
              Backup  your  phone to file. It’s possible to backup (depends on
              phone and backup format):

              * phonebook from SIM and phone memory
              * calendar notes
              * SMSC settings
              * operator logo
              * startup (static) logo or startup text
              * WAP bookmarks
              * WAP settings
              * caller logos and groups
              * user ringtones

              There are various backup formats supported and the backup format
              is guessed based on file extension:

              *  .lmb  -  Nokia  backup,  supports  contacts, caller logos and
              startup logo.
              * .vcs - vCalendar, supports calendar and todo.
              * .vcf - vCard, supports contacts.
              * .ldif - LDAP import, supports contacts.
              * .ics - iCalendar, supports calendar and todo.
              * Any other extension is Gammu backup file and it  supports  all
              data mentioned above.

              See  EXAMPLE section for some hints on manipulating Gammu backup
              format.

       clearall
              Deletes all private data from the phone.

       deletetodo start [stop]
              Deletes selected todo entries in phone.

       getallcategory TODO|PHONEBOOK

       getalltodo
              Retrieves all todo entries from phone.

       getcategory TODO|PHONEBOOK start [stop]

       gettodo start [stop]
              Retrieves selected todo entries from phone.

       listtodocategory text|number

       restore file [-yes]
              Restore settings written in file created using backup option.

              Please note that restoring deletes all current content in phone.
              If you want only to add entries to phone, use addnew.

              In some phones restoring calendar notes will not show error, but
              won’t be done, when phone doesn’t have set clock inside.

       savefile TODO target.vcs file location
              Allows to convert between various  backup  formats  which  gammu
              supports  for  todo  events. The file type is guessed (for input
              file guess is based on extension and file  content,  for  output
              solely on extension).

              For  example  if  you  want  to  convert single entry from gammu
              native backup to vCalendar, you need following command:

                  gammu savefile CALENDAR output.vcs myCalendar.backup 260

       savesms TODO file location [-folder  id]  [-unread]  [-read]  [-unsent]
       [-sent] [-sender number] [-smsname name] [-smscset number] [-smscnumber
       number] [-reply] [-maxsms num]
              Saves a message with a todo entry. The content will be read from
              any  backup format which Gammu supports and from given location.

              For description of shared parameters see Common  parameters  for
              sendsms and savesms.

       sendsms   TODO   destination   file   location   [-report]   [-validity
       HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]  [-save  [-folder  number]]   [-smscset
       number] [-smscnumber number] [-reply] [-maxsms num]
              Sends  a message, for description of message specific parameters
              see savesms TODO.

              For description of shared parameters see Common  parameters  for
              sendsms and savesms.

   Notes
       getallnotes
              Reads all notes from the phone.

   Date, time and alarms
       getalarm [start]
              Get alarm from phone, if no location is specified, 1 is used.

       getdatetime
              Get date and time from phone

       setalarm hour minute
              Sets repeating alarm in phone on selected time.

       setdatetime [HH:MM[:SS]] [YYYY/MM/DD]
              Set  date  and  time  in phone to date and time set in computer.
              Please note, that  this  option  doesn’t  show  clock  on  phone
              screen. It only set date and time.

              TIP:  you  can  make  such  synchronization each time, when will
              connect your phone and use Gammu. See gammurc(5) for details.

   Categories
       addcategory TODO|PHONEBOOK text

       addnew file [-yes]
              Adds data written in  file  created  using  backup  option.  All
              things  backup’ed by backup can be restored (when made backup to
              Gammu text file).

              Please note that this adds all content of backup file  to  phone
              and does not care about current data in the phone (no duplicates
              are detected).

       backup file [-yes]
              Backup your phone to file. It’s possible to backup  (depends  on
              phone and backup format):

              * phonebook from SIM and phone memory
              * calendar notes
              * SMSC settings
              * operator logo
              * startup (static) logo or startup text
              * WAP bookmarks
              * WAP settings
              * caller logos and groups
              * user ringtones

              There are various backup formats supported and the backup format
              is guessed based on file extension:

              * .lmb - Nokia  backup,  supports  contacts,  caller  logos  and
              startup logo.
              * .vcs - vCalendar, supports calendar and todo.
              * .vcf - vCard, supports contacts.
              * .ldif - LDAP import, supports contacts.
              * .ics - iCalendar, supports calendar and todo.
              *  Any  other extension is Gammu backup file and it supports all
              data mentioned above.

              See EXAMPLE section for some hints on manipulating Gammu  backup
              format.

       clearall
              Deletes all private data from the phone.

       getallcategory TODO|PHONEBOOK

       getcategory TODO|PHONEBOOK start [stop]

       listmemorycategory text|number

       listtodocategory text|number

       restore file [-yes]
              Restore settings written in file created using backup option.

              Please note that restoring deletes all current content in phone.
              If you want only to add entries to phone, use addnew.

              In some phones restoring calendar notes will not show error, but
              won’t be done, when phone doesn’t have set clock inside.

   Backing up and restoring
       addnew file [-yes]
              Adds  data  written  in  file  created  using backup option. All
              things backup’ed by backup can be restored (when made backup  to
              Gammu text file).

              Please  note  that this adds all content of backup file to phone
              and does not care about current data in the phone (no duplicates
              are detected).

       addsms folder file [-yes]
              Adds  SMSes  from  file (format like backupsms uses) to selected
              folder in phone.

       backup file [-yes]
              Backup your phone to file. It’s possible to backup  (depends  on
              phone and backup format):

              * phonebook from SIM and phone memory
              * calendar notes
              * SMSC settings
              * operator logo
              * startup (static) logo or startup text
              * WAP bookmarks
              * WAP settings
              * caller logos and groups
              * user ringtones

              There are various backup formats supported and the backup format
              is guessed based on file extension:

              * .lmb - Nokia  backup,  supports  contacts,  caller  logos  and
              startup logo.
              * .vcs - vCalendar, supports calendar and todo.
              * .vcf - vCard, supports contacts.
              * .ldif - LDAP import, supports contacts.
              * .ics - iCalendar, supports calendar and todo.
              *  Any  other extension is Gammu backup file and it supports all
              data mentioned above.

              See EXAMPLE section for some hints on manipulating Gammu  backup
              format.

       backupsms file [-yes|-all]
              Stores all SMSes from phone to file.

              Use -yes for answering yes to all questions (backup all messages
              and delete them from phone), or -all to just backup all  folders
              while keeping messages in phone.

       restore file [-yes]
              Restore settings written in file created using backup option.

              Please note that restoring deletes all current content in phone.
              If you want only to add entries to phone, use addnew.

              In some phones restoring calendar notes will not show error, but
              won’t be done, when phone doesn’t have set clock inside.

       restoresms file [-yes]
              Restores  SMSes  from  file  (format  like  backupsms  uses)  to
              selected folder in  phone.  Please  note  that  this  overwrites
              existing messages in phone (if it supports it).

       savefile BOOKMARK target.url file location

       savefile CALENDAR target.vcs file location
              Allows  to  convert  between  various backup formats which gammu
              supports for calendar events. The  file  type  is  guessed  (for
              input  file  guess  is  based on extension and file content, for
              output solely on extension).

              For example if you want  to  convert  single  entry  from  gammu
              native backup to vCalendar, you need following command:

                  gammu savefile CALENDAR output.vcs myCalendar.backup 260

       savefile TODO target.vcs file location
              Allows  to  convert  between  various backup formats which gammu
              supports for todo events. The file type is  guessed  (for  input
              file  guess  is  based on extension and file content, for output
              solely on extension).

              For example if you want  to  convert  single  entry  from  gammu
              native backup to vCalendar, you need following command:

                  gammu savefile CALENDAR output.vcs myCalendar.backup 260

       savefile VCARD10|VCARD21 target.vcf file SM|ME location
              Allows  to  convert  between  various backup formats which gammu
              supports for phonebook events. The file  type  is  guessed  (for
              input  file  guess  is  based on extension and file content, for
              output solely on extension).

              For example if you want  to  convert  single  entry  from  gammu
              native backup to vCard, you need following command:

                  gammu savefile CALENDAR output.vcf myPhonebook.backup ME 42

   Nokia specific
       nokiaaddfile
       Gallery|Gallery2|Camera|Tones|Tones2|Records|Video|Playlist|MemoryCard
       file   [-name   name]   [-protected]  [-readonly]  [-system]  [-hidden]
       [-newtime]
              Install the *.jar/*.jad file pair of a midlet in the application
              or game menu of the phone. You have to give the name without the
              jar/jad  suffix,  otherwise  you will get the slightly confusing
              error message Can’t open specified file. Read only ?

              The option -overwrite deletes the application’s  .jad  and  .jar
              files bevor installing, but doesn’t delete the application data.
              Option -overwriteall will  also  delete  all  data.  Both  these
              options work only for Application or Game upload.

              Example:   gammu   nokiaaddfile   Application  Alien  will  read
              Alien.JAD and Alien.JAR and add to Applications

              Example: gammu nokiaaddfile Tones file.mid  will  read  file.mid
              and add to Tones folder

              You  can  use  jadmaker(1)  to  generate a .jad file from a .jar
              file.

       nokiaaddplaylists

       nokiacomposer file
              Show, how to enter RTTL ringtone in composer  existing  in  many
              Nokia phones (and how should it look like).

       nokiadebug filename [[v11-22] [,v33-44]...]

       nokiadisplayoutput

       nokiadisplaytest number

       nokiagetadc

       nokiagetoperatorname
              6110.c  phones  have  place  for  name  for  one GSM network (of
              course, with flashing it’s possible to  change  all  names,  but
              Gammu  is  not  flasher  ;-)).  You can get this name using this
              option.

       nokiagetpbkfeatures memorytype

       nokiagetscreendump

       nokiagett9

       nokiagetvoicerecord location

              Get voice record from location and save to  WAV  file.  File  is
              coded  using  GSM  6.10  codec (available for example in win32).
              Name of file is like name of voice record in phone.

       nokiamakecamerashoot

       nokianetmonitor test
              Takes output or set netmonitor for Nokia DCT3 phones.

              TIP:  For  more   info   about   this   option,   please   visit
              http://www.mwiacek.com and read netmonitor manual.

              TIP:  test  243  enables  all  tests  (after using command gammu
              nokianetmonitor 243 in some phones like 6210  or  9210  have  to
              reboot them to see netmonitor menu)

       nokianetmonitor36
              Reset counters from netmonitor test 36 in Nokia DCT3 phones.

              TIP:   For   more   info   about   this   option,  please  visit
              http://www.mwiacek.com and read netmonitor manual.

       nokiasecuritycode
              Get/reset to "12345" security code

       nokiaselftests

       nokiasetlights keypad|display|torch on|off

       nokiasetoperatorname [networkcode name]

       nokiasetphonemenus
              Enable all (?) possible menus for DCT3 Nokia phones:

              1. ALS (Alternative Line Service) option menu
              2. vibra menu for 3210
              3. 3315 features in 3310 5.45 and higher
              4. two additional games (React and  Logic)  for  3210  5.31  and
              higher
              5. WellMate menu for 6150
              6. NetMonitor

              and for DCT4:

              1. ALS (Alternative Line Service) option menu
              2. Bluetooth, WAP bookmarks and settings menu, ... (6310i)
              3. GPRS Always Online
               ...

       nokiasetvibralevel level
              Set vibra power to "level" (given in percent)

       nokiatuneradio

       nokiavibratest

   Siemens specific
       siemensnetmonact netmon_type (1-full, 2-simple)

       siemensnetmonitor test

       siemenssatnetmon

   Network
       getgprspoint start [stop]

       listnetworks [country]
              Show names/codes of GSM networks known for Gammu

       monitor [times]
              Get  phone  status  and  writes continuously to standard output.
              Press Ctrl+C to break this state.

       networkinfo
              Show information about network status from the phone.

       nokiadebug filename [[v11-22] [,v33-44]...]

       nokiagetoperatorname
              6110.c phones have place  for  name  for  one  GSM  network  (of
              course,  with  flashing  it’s  possible to change all names, but
              Gammu is not flasher ;-)). You can  get  this  name  using  this
              option.

       nokianetmonitor test
              Takes output or set netmonitor for Nokia DCT3 phones.

              TIP:   For   more   info   about   this   option,  please  visit
              http://www.mwiacek.com and read netmonitor manual.

              TIP: test 243 enables  all  tests  (after  using  command  gammu
              nokianetmonitor  243  in  some  phones like 6210 or 9210 have to
              reboot them to see netmonitor menu)

       nokiasetoperatorname [networkcode name]

       setautonetworklogin

       siemensnetmonact netmon_type (1-full, 2-simple)

       siemensnetmonitor test

       siemenssatnetmon

   WAP settings and bookmarks
       addnew file [-yes]
              Adds data written in  file  created  using  backup  option.  All
              things  backup’ed by backup can be restored (when made backup to
              Gammu text file).

              Please note that this adds all content of backup file  to  phone
              and does not care about current data in the phone (no duplicates
              are detected).

       backup file [-yes]
              Backup your phone to file. It’s possible to backup  (depends  on
              phone and backup format):

              * phonebook from SIM and phone memory
              * calendar notes
              * SMSC settings
              * operator logo
              * startup (static) logo or startup text
              * WAP bookmarks
              * WAP settings
              * caller logos and groups
              * user ringtones

              There are various backup formats supported and the backup format
              is guessed based on file extension:

              * .lmb - Nokia  backup,  supports  contacts,  caller  logos  and
              startup logo.
              * .vcs - vCalendar, supports calendar and todo.
              * .vcf - vCard, supports contacts.
              * .ldif - LDAP import, supports contacts.
              * .ics - iCalendar, supports calendar and todo.
              *  Any  other extension is Gammu backup file and it supports all
              data mentioned above.

              See EXAMPLE section for some hints on manipulating Gammu  backup
              format.

       clearall
              Deletes all private data from the phone.

       deletewapbookmark start [stop]
              Delete WAP bookmarks from phone.

              Locations are numerated from 1.

       getchatsettings start [stop]

       getsyncmlsettings start [stop]

       getwapbookmark start [stop]
              Get WAP bookmarks from phone.

              Locations are numerated from 1.

       getwapsettings start [stop]
              Get WAP settings from phone.

              Locations are numerated from 1.

       restore file [-yes]
              Restore settings written in file created using backup option.

              Please note that restoring deletes all current content in phone.
              If you want only to add entries to phone, use addnew.

              In some phones restoring calendar notes will not show error, but
              won’t be done, when phone doesn’t have set clock inside.

       savefile BOOKMARK target.url file location

       savesms BOOKMARK file location [-folder id] [-unread] [-read] [-unsent]
       [-sent] [-sender number] [-smsname name] [-smscset number] [-smscnumber
       number] [-reply] [-maxsms num]
              Read  WAP  bookmark from file created by backup option and saves
              in Nokia format as SMS

              For description of shared parameters see Common  parameters  for
              sendsms and savesms.

       savesms WAPINDICATOR URL Title [-folder id] [-unread] [-read] [-unsent]
       [-sent] [-sender number] [-smsname name] [-smscset number] [-smscnumber
       number] [-reply] [-maxsms num]
              Saves a SMS with a WAP indication for given URL and title.

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       savesms WAPSETTINGS file  location  DATA|GPRS  [-folder  id]  [-unread]
       [-read]  [-unsent]  [-sent]  [-sender number] [-smsname name] [-smscset
       number] [-smscnumber number] [-reply] [-maxsms num]
              Read WAP settings from file created by backup option  and  saves
              in Nokia format as SMS

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       sendsms  BOOKMARK  destination  file  location   [-report]   [-validity
       HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]   [-save  [-folder  number]]  [-smscset
       number] [-smscnumber number] [-reply] [-maxsms num]
              Sends a message, for description of message specific  parameters
              see savesms BOOKMARK.

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       sendsms  WAPINDICATOR  destination  URL  Title   [-report]   [-validity
       HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]   [-save  [-folder  number]]  [-smscset
       number] [-smscnumber number] [-reply] [-maxsms num]
              Sends a message, for description of message specific  parameters
              see savesms WAPINDICATOR.

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       sendsms  WAPSETTINGS  destination  file  location  DATA|GPRS  [-report]
       [-validity  HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]  [-save  [-folder  number]]
       [-smscset number] [-smscnumber number] [-reply] [-maxsms num]
              Sends a message, for description of message specific  parameters
              see savesms WAPSETTINGS.

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

   MMS and MMS settings
       getallmms [-save]

       geteachmms [-save]

       getmmsfolders

       getmmssettings start [stop]

       readmmsfile file [-save]

       savesms MMSINDICATOR URL Title Sender [-folder  id]  [-unread]  [-read]
       [-unsent]  [-sent]  [-sender  number] [-smsname name] [-smscset number]
       [-smscnumber number] [-reply] [-maxsms num]

              Saves a message with MMS indication. The  recipient  phone  will
              then download MMS from given URL and display it.

              Please note that you should provide valid smil data on that URL.

              For description of shared parameters see Common  parameters  for
              sendsms and savesms.

       savesms  MMSSETTINGS  file  location   [-folder  id]  [-unread] [-read]
       [-unsent] [-sent] [-sender number] [-smsname  name]  [-smscset  number]
       [-smscnumber number] [-reply] [-maxsms num]
              Saves  a  message with MMS configuration. The configuration will
              be read from Gammu backup file from given location.

              For description of shared parameters see Common  parameters  for
              sendsms and savesms.

       sendsms  MMSINDICATOR destination URL Title Sender [-report] [-validity
       HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]  [-save  [-folder  number]]   [-smscset
       number] [-smscnumber number] [-reply] [-maxsms num]
              Sends  a message, for description of message specific parameters
              see savesms MMSINDICATOR.

              For description of shared parameters see Common  parameters  for
              sendsms and savesms.

       sendsms  MMSSETTINGS  destination  file  location  [-report] [-validity
       HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]  [-save  [-folder  number]]   [-smscset
       number] [-smscnumber number] [-reply] [-maxsms num]
              Sends  a message, for description of message specific parameters
              see savesms MMSSETTINGS.

              For description of shared parameters see Common  parameters  for
              sendsms and savesms.

   Phone tests
       nokiadisplaytest number

       nokiagetadc

       nokiaselftests

       nokiasetlights keypad|display|torch on|off

       nokiavibratest

   FM radio
       addnew file [-yes]
              Adds  data  written  in  file  created  using backup option. All
              things backup’ed by backup can be restored (when made backup  to
              Gammu text file).

              Please  note  that this adds all content of backup file to phone
              and does not care about current data in the phone (no duplicates
              are detected).

       backup file [-yes]
              Backup  your  phone to file. It’s possible to backup (depends on
              phone and backup format):

              * phonebook from SIM and phone memory
              * calendar notes
              * SMSC settings
              * operator logo
              * startup (static) logo or startup text
              * WAP bookmarks
              * WAP settings
              * caller logos and groups
              * user ringtones

              There are various backup formats supported and the backup format
              is guessed based on file extension:

              *  .lmb  -  Nokia  backup,  supports  contacts, caller logos and
              startup logo.
              * .vcs - vCalendar, supports calendar and todo.
              * .vcf - vCard, supports contacts.
              * .ldif - LDAP import, supports contacts.
              * .ics - iCalendar, supports calendar and todo.
              * Any other extension is Gammu backup file and it  supports  all
              data mentioned above.

              See  EXAMPLE section for some hints on manipulating Gammu backup
              format.

       clearall
              Deletes all private data from the phone.

       getfmstation start [stop]
              Show info about FM stations in phone

       nokiatuneradio

       restore file [-yes]
              Restore settings written in file created using backup option.

              Please note that restoring deletes all current content in phone.
              If you want only to add entries to phone, use addnew.

              In some phones restoring calendar notes will not show error, but
              won’t be done, when phone doesn’t have set clock inside.

   Phone information
       checkfirmware

              Gammu connects to www.gammu.org and checks for  latest  firmware
              versions     available     for     the    device.    The    file
              <http://www.gammu.org/support/phones/phonedbxml.php?model=x>
              will  be  downloaded and all phone details will be read from it.
              No private data are  sent  to  server.  Internet  connection  to
              www.gammu.org on port 80 required.

       getdisplaystatus

       getsecuritystatus
              Show,  if  phone wait for security code (like PIN, PUK, etc.) or
              not

       identify
              Show the most important phone data.

       monitor [times]
              Get phone status and writes  continuously  to  standard  output.
              Press Ctrl+C to break this state.

       nokiasecuritycode
              Get/reset to "12345" security code

   Phone settings
       getcalendarsettings
              Displays  calendar  settings like first day of week or automatic
              deleting of old entries.

       getprofile start [stop]

       resetphonesettings PHONE|DEV|UIF|ALL|FACTORY
              Reset phone settings. BE CAREFULL !!!!

              PHONE:

              DEV:

              ALL:

              Clear user settings
              * removes or set logos to default
              * set default phonebook and other menu settings
              * clear T9 words,
              * clear call register info
              * set default profiles settings
              * clear user ringtones

              UIF:
              * changes like after ALL
              * disables netmon and PPS (all "hidden" menus)

              FACTORY:
              * changes like after UIF
              * clear date/time

       savesms  PROFILE  [-folder  id]  [-unread]  [-read]  [-unsent]  [-sent]
       [-sender number] [-smsname name] [-smscset number] [-smscnumber number]
       [-reply]  [-maxsms  num]  [-name  name]  [-bitmap  bitmap]   [-ringtone
       ringtone]
              Read ringtone (RTTL) format and bitmap (Picture Image size)  and
              name and save as Nokia profile.

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

       sendsms      PROFILE       destination       [-report]       [-validity
       HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]   [-save  [-folder  number]]  [-smscset
       number]  [-smscnumber  number]  [-reply]  [-maxsms  num]  [-name  name]
       [-bitmap bitmap] [-ringtone ringtone]
              Sends a message, for description of message specific  parameters
              see savesms PROFILE.

              For  description  of shared parameters see Common parameters for
              sendsms and savesms.

   Dumps decoding
       decodebinarydump file [phonemodel]
              Decodes a dump made by Gammu with logformat se  to  binary  (see
              README for info about this method of reporting bugs).

              This  option  is  available  only  if  Gammu  was  compiled with
              debuging options.

       decodesniff MBUS2|IRDA file [phonemodel]
              Option available only, if Gammu was compiled with debug.  Allows
              to   decode   sniffs.  See  /docs/develop/develop.txt  for  more
              details.

       makeconverttable file

   Functions that dont fit elsewhere
       batch [file]
              Starts Gammu in a batch mode. In this mode you can issue several
              commands  each on one line. Lines starting with # are treated as
              a comments.

              By default, commands are read from standard input, but  you  can
              optionally specify a file from where they would be read (special
              case - means standard input).

       entersecuritycode PIN|PUK|PIN2|PUK2|PHONE|NETWORK code|-
              Allow to enter security code from PC. When code is -, it is read
              from stdin.

       nokiagetscreendump

       nokiagetvoicerecord location

              Get  voice  record  from  location and save to WAV file. File is
              coded using GSM 6.10 codec (available  for  example  in  win32).
              Name of file is like name of voice record in phone.

       nokiamakecamerashoot

       nokiasetphonemenus
              Enable all (?) possible menus for DCT3 Nokia phones:

              1. ALS (Alternative Line Service) option menu
              2. vibra menu for 3210
              3. 3315 features in 3310 5.45 and higher
              4.  two  additional  games  (React  and Logic) for 3210 5.31 and
              higher
              5. WellMate menu for 6150
              6. NetMonitor

              and for DCT4:

              1. ALS (Alternative Line Service) option menu
              2. Bluetooth, WAP bookmarks and settings menu, ... (6310i)
              3. GPRS Always Online
               ...

       nokiasetvibralevel level
              Set vibra power to "level" (given in percent)

       presskeysequence mMnNpPuUdD+-123456789*0#gGrR<>[]hHcCjJfFoOmMdD@
              Press specified key sequence on phone keyboard

              mM - Menu
              nN - Names key
              pP - Power
              uU - Up
              dD - Down
              +- - +-
              gG - Green
              rR - Red
              123456789*0# is numeric keyboard

       reset SOFT|HARD
              Make phone reset: soft (without asking for PIN)  or  hard  (with
              PIN).

              Note: some phones will make hard reset even with SOFT option.

       searchphone [-debug]
              Attempts  to search for a connected phone. Please note that this
              can take a very long time, but in case you have no clue  how  to
              configure  phone  connection,  this  is a convenient way to find
              working setup for Gammu.

   Gammu information
       checkversion [STABLE]
              Checks whether there is newer Gammu version available online (if
              Gammu  has  been  compiled  with  CURL).  If you pass additional
              parameter STABLE, only stable versions will be checked.

       features
              Print information about compiled in features.

       help [topic]
              Print help. By default general help is printed, but you can also
              specify a help category to get more detailed help on some topic.

       version
              Print version information and license.

FILES

       ~/.gammurc
       /usr/share/doc/gammu/*
       /dev/ircomm?
       /dev/ttyS?
       /dev/ttyACM?

EXAMPLE

   Configuration
       To check it out, you need to have configuration  file  for  gammu,  see
       gammurc(5) for more details about it.

   Sending messages
       Save text message up to standard 160 chars:

              echo "All your base are belong to us" | gammu savesms TEXT

              or

              gammu savesms TEXT -text "All your base are belong to us"

       Save long text message:

              echo  "All your base are belong to us" | gammu savesms TEXT -len
              400

              or

              gammu savesms TEXT -len 400 -text "All your base are  belong  to
              us"

              or

              gammu savesms EMS -text "All your base are belong to us"

       Save  some  funky  message  with  predefined sound and animation from 2
       bitmaps:

              gammu  savesms  EMS  -text  "Greetings"  -defsound 1 -text "from
              Gammu" -tone10 axelf.txt -animation 2 file1.bmp file2.bmp

       Save protected message with ringtone:

              gammu  savesms  EMS  -protected  2  -variablebitmaplong  ala.bmp
              -toneSElong axelf.txt -toneSE ring.txt

   Backups
       If  you will backup settings to Gammu text file, it will be possible to
       edit it. It’s easy: many things in this file will be written  double  -
       once  in  Unicode,  once in ASCII. When you will remove Unicode version
       Gammu will use ASCII on restore (and you can easy edit ASCII text)  and
       will  convert  it  according  to your OS locale. When will be available
       Unicode version of text, it will be used instead of ASCII (usefull with
       Unicode phones - it isn’t important, what locale is set in computer and
       no conversion Unicode -> ASCII and ASCII -> Unicode is done).

       You can use any editor with regular expressions function to edit backup
       text file. Examples of such editors can be vim <http://www.vim.org/> or
       TextPad  <http://www.textpad.com/>  which  both  do   support   regular
       expressions.

       Remove info about voice tags

              Find: ^Entry\([0-9][0-9]\)VoiceTag = \(.*\)\n

              Replace:

       Change all numbers starting from +3620, +3630, +3660, +3670 to +3620

              Find:    Type    =    NumberGeneral\nEntry\([0-9][0-9]\)Text   =
              "\+36\(20\|30\|60\|70\)\n

              Replace: Type = NumberMobile\nEntry\1Text = "\+3620

       Change phone numbers type to mobile for numbers  starting  from  +3620,
       +3630,... and removing the corresponding TextUnicode line

              Find:   Type    =    NumberGeneral\nEntry\([0-9][0-9]\)Text    =
              "\+36\([2367]0\)\([^\"]*\)"\nEntry\([0-9][0-9]\)TextUnicode    =
              \([^\n]*\)\n

              Replace: Type = NumberMobile\nEntry\1Text = "\+36\2\3"\n

COPYRIGHT

       Copyright © 2003-2009 Marcin Wiacek, Michal Cihar  and  other  authors.
       License         GPLv2:         GNU         GPL         version        2
       <http://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
       This is free software: you are free  to  change  and  redistribute  it.
       There is NO WARRANTY, to the extent permitted by law.

REPORTING BUGS

       There  are definitely many bugs, reporting to author is welcome. Please
       include some useful information when sending  bug  reports  (especially
       debug  logs,  operating  system, it’s version and phone information are
       needed).

       To generate debug log, enable it in gammurc (alternatively you  can  do
       it on command line using -d textall -f /tmp/gammu.log):

           [gammu]
           ...your connection settings...
           logfile = /tmp/gammu.log
           logformat = textall

       With  this  settings, Gammu generates /tmp/gammu.log on each connection
       to phone and stores dump of communication there. You can also find some
       hints for improving support for your phone in this log.

       Please report bugs to <http://bugs.cihar.com>.

AUTHOR

       You can contact authors on <gammu-users@lists.sourceforge.net>.

       Michal  Cihar  <michal@cihar.com>  is  current  project  maintainer and
       contributor of most of AT and OBEX code.

       Marcin Wiacek <marcin@mwiacek.com> is project iniciator and contributor
       of most Nokia code.

       As  this  project  grew from Gnokii, we would like to thanks all Gnokii
       developers, especially Pavel Janik, Pawel Kot and Manfred Jonsson  (see
       CREDITS from Gnokii for all their contributor).

       Many  other  people  have helped with various features, check ChangeLog
       for more details.

SEE ALSO

       gammu-smsd(1), gammu-smsd-inject(1), gammurc(5), jadmaker(1)

       Some  more  hints  can  be  found   in   README   file   or   on   wiki
       <http://www.gammu.org/>.

       Related programs which can be used with GSM modem:

       cu(1), gnokii(1), minicom(1)

       Graphical interfaces for Gammu:

       wammu(1), gmobilemedia(1)