Provided by: keychain_2.6.8-2_all bug

NAME

       keychain - re-use ssh-agent and/or gpg-agent between logins

SYNOPSIS

       keychain [ -hkQqV ] [ --clear --help --ignore-missing --noask
       --nocolor --nogui --nolock --quick --quiet --version ]
       [ --agents list ] [ --attempts num ] [ --dir dirname ]
       [ --host name ] [ --lockwait seconds ]
       [ --stop which ] [ --timeout minutes ] [ keys... ]

DESCRIPTION

       keychain is a manager for ssh-agent, typically run from
       ~/.bash_profile.  It allows your shells and cron jobs to share a single
       ssh-agent process.  By default, the ssh-agent started by keychain is
       long-running and will continue to run, even after you have logged out
       from the system.  If you want to change this behavior, take a look at
       the --clear and --timeout options, described below.

       When keychain is run, it checks for a running ssh-agent, otherwise it
       starts one.  It saves the ssh-agent environment variables to
       ~/.keychain/${HOSTNAME}-sh, so that subsequent logins and non-
       interactive shells such as cron jobs can source the file and make
       passwordless ssh connections.  In addition, when keychain runs, it
       verifies that the key files specified on the command-line are known to
       ssh-agent, otherwise it loads them, prompting you for a password if
       necessary.

       Keychain also supports gpg-agent in the same ways that ssh-agent is
       supported.  By default keychain attempts to start all available agents
       but will fall back to only gpg-agent or only ssh-agent if either is
       unavailable.  You can specifically limit keychain using the --agents
       option.

       keychain supports most UNIX-like operating systems, including Cygwin.
       It works with Bourne-compatible, csh-compatible and fish shells.

OPTIONS

       --agents list
           Start the agents listed.  By default keychain will build the list
           automatically based on the existence of ssh-agent and/or gpg-agent
           on the system.  The list should be comma-separated, for example
           "gpg,ssh"

       --attempts num
           Try num times to add keys before giving up.  The default is 1.

       --clear
           Delete all of ssh-agent’s keys.  Typically this is used in
           .bash_profile.  The theory behind this is that keychain should
           assume that you are an intruder until proven otherwise.  However,
           while this option increases security, it still allows your cron
           jobs to use your ssh keys when you’re logged out.

       --confirm
           Keys are subject to interactive confirmation by the SSH_ASKPASS
           program before being used for authentication.  See the -c option
           for ssh-add(1).

       --dir dirname
           Keychain will use dirname rather than $HOME/.keychain

       --eval
           Keychain will print lines to be evaluated in the shell on stdout.
           It respects the SHELL environment variable to determine if Bourne
           shell or C shell output is expected.

       --env filename
           After parsing options, keychain will load additional environment
           settings from "filename".  By default, if "--env" is not given,
           then keychain will attempt to load from ~/.keychain/[hostname]-env
           or alternatively ~/.keychain/env.  The purpose of this file is to
           override settings such as PATH, in case ssh is stored in a non-
           standard place.

       -h --help
           Show help that looks remarkably like this man-page.

       --host name
           Set alternate hostname for creation of pidfiles

       --ignore-missing
           Don’t warn if some keys on the command-line can’t be found.  This
           is useful for situations where you have a shared .bash_profile, but
           your keys might not be available on every machine where keychain is
           run.

       --inherit which
           Attempt to inherit agent variables from the environment.  This can
           be useful in a variety of circumstances, for example when ssh-agent
           is started by gdm.  The following values are valid for "which":

           local       Inherit when a pid (e.g. SSH_AGENT_PID) is set in the
                       environment.  This disallows inheriting a forwarded
                       agent.

           any         Inherit when a sock (e.g. SSH_AUTH_SOCK) is set in the
                       environment.  This allows inheriting a forwarded agent.

           local-once  Same as "local", but only inherit if keychain isn’t
                       already providing an agent.

           any-once    Same as "any", but only inherit if keychain isn’t
                       already providing an agent.

           By default, keychain-2.5.0 and later will behave as if "--inherit
           local-once" is specified.  You should specify "--noinherit" if you
           want the older behavior.

       --lockwait seconds
           How long to wait for the lock to become available.  Defaults to 30
           seconds.  -1 indicates to wait forever.

       --noask
           This option tells keychain do everything it normally does (ensure
           ssh-agent is running, set up the ~/.keychain/[hostname]-{c}sh
           files) except that it will not prompt you to add any of the keys
           you specified if they haven’t yet been added to ssh-agent.

       --nocolor
           Disable color hilighting for non ANSI-compatible terms.

       --nogui
           Don’t honor SSH_ASKPASS, if it is set.  This will cause ssh-add to
           prompt on the terminal instead of using a graphical program.

       --noinherit
           Don’t inherit any agent processes, overriding the default
           "--inherit local-once"

       --nolock
           Don’t attempt to use a lockfile while manipulating files, pids and
           keys.

       -k --stop which
           Kill currently running agent processes.  The following values are
           valid for "which":

           all      Kill all agent processes and quit keychain immediately.
                    Prior to keychain-2.5.0, this was the behavior of the bare
                    "--stop" option.

           others   Kill agent processes other than the one keychain is
                    providing.  Prior to keychain-2.5.0, keychain would do
                    this automatically.  The new behavior requires that you
                    specify it explicitly if you want it.

           mine     Kill keychain’s agent processes, leaving other agents
                    alone.

       -Q --quick
           If an ssh-agent process is running then use it.  Don’t verify the
           list of keys, other than making sure it’s non-empty.  This option
           avoids locking when possible so that multiple terminals can be
           opened simultaneously without waiting on each other.

       -q --quiet
           Only print messages in case of warning, error or required
           interactivity.

       --timeout minutes
           Set a timeout in minutes on your keys.  This is conveyed to ssh-
           agent which does the actual timing out of keys since keychain
           doesn’t run continuously.

       -V --version
           Show version information.

EXAMPLES

       This snippet should work in any shell to load two ssh keys and one gpg
       key:

           eval ‘keychain --eval id_rsa id_dsa 0123ABCD‘

       If you have trouble with that in csh:

           setenv SHELL /bin/csh
           eval ‘keychain --eval id_rsa id_dsa 0123ABCD‘

       This is equivalent for Bourne shells (including bash and zsh) but
       doesn’t use keychain’s --eval feature:

           keychain id_rsa id_dsa 0123ABCD
           [ -z "$HOSTNAME" ] && HOSTNAME=‘uname -n‘
           [ -f $HOME/.keychain/$HOSTNAME-sh ] &&
                   . $HOME/.keychain/$HOSTNAME-sh
           [ -f $HOME/.keychain/$HOSTNAME-sh-gpg ] &&
                   . $HOME/.keychain/$HOSTNAME-sh-gpg

       This is equivalent for C shell (including tcsh):

           keychain id_rsa id_dsa 0123ABCD
           host=‘uname -n‘
           if (-f $HOME/.keychain/$host-csh) then
                   source $HOME/.keychain/$host-csh
           endif
           if (-f $HOME/.keychain/$host-csh-gpg) then
                   source $HOME/.keychain/$host-csh-gpg
           endif

       To load keychain variables from a script (for example from cron) and
       abort unless id_dsa is available:

           # Load keychain variables and check for id_dsa
           [ -z "$HOSTNAME" ] && HOSTNAME=‘uname -n‘
           . $HOME/.keychain/$HOSTNAME-sh 2>/dev/null
           ssh-add -l 2>/dev/null │ grep -q id_dsa ││ exit 1

SEE ALSO

       ssh-agent(1)

NOTES

       Keychain is maintained by Aron Griffis <agriffis@gentoo.org>.  If you
       need to report a bug or request an enhancement, please do so at
       <http://bugs.gentoo.org/> and assign to agriffis@gentoo.org

       Keychain was originally written by Daniel Robbins
       <drobbins@gentoo.org>, who has also written a series of three articles
       about it.  The articles can be found starting at
       <http://www-106.ibm.com/developerworks/library/l-keyc.html>