Provided by: freebsd-manpages_8.0-1_all
speaker, spkr - console speaker device driver
The speaker device driver allows applications to control the PC console
speaker on an IBM-PC--compatible machine running FreeBSD.
Only one process may have this device open at any given time; open(2) and
close(2) are used to lock and relinquish it. An attempt to open when
another process has the device locked will return -1 with an EBUSY error
indication. Writes to the device are interpreted as ‘play strings’ in a
simple ASCII melody notation. An ioctl(2) request for tone generation at
arbitrary frequencies is also supported.
Sound-generation does not monopolize the processor; in fact, the driver
spends most of its time sleeping while the PC hardware is emitting tones.
Other processes may emit beeps while the driver is running.
Applications may call ioctl(2) on a speaker file descriptor to control
the speaker driver directly; definitions for the ioctl(2) interface are
in The tone_t structure used in these calls has two fields, specifying a
frequency (in Hz) and a duration (in 1/100ths of a second). A frequency
of zero is interpreted as a rest.
At present there are two such ioctl(2) calls. SPKRTONE accepts a pointer
to a single tone structure as third argument and plays it. SPKRTUNE
accepts a pointer to the first of an array of tone structures and plays
them in continuous sequence; this array must be terminated by a final
member with a zero duration.
The play-string language is modeled on the PLAY statement conventions of
IBM Advanced BASIC 2.0. The MB, MF, and X primitives of PLAY are not
useful in a timesharing environment and are omitted. The ‘octave-
tracking’ feature and the slur mark are new.
There are 84 accessible notes numbered 1-84 in 7 octaves, each running
from C to B, numbered 0-6; the scale is equal-tempered A440 and octave 3
starts with middle C. By default, the play function emits half-second
notes with the last 1/16th second being ‘rest time’.
Play strings are interpreted left to right as a series of play command
groups; letter case is ignored. Play command groups are as follows:
CDEFGAB Letters A through G cause the corresponding note to be played
in the current octave. A note letter may optionally be
followed by an “accidental sign”, one of # + or -; the first
two of these cause it to be sharped one half-tone, the last
causes it to be flatted one half-tone. It may also be
followed by a time value number and by sustain dots (see
below). Time values are interpreted as for the L command
O n If n is numeric, this sets the current octave. n may also be
one of L or N to enable or disable octave-tracking (it is
disabled by default). When octave-tracking is on,
interpretation of a pair of letter notes will change octaves
if necessary in order to make the smallest possible jump
between notes. Thus ‘‘olbc’’ will be played as ‘‘olb>c’’, and
‘‘olcb’’ as ‘‘olc<b’’. Octave locking is disabled for one
letter note following >, < and O. (The octave-
locking feature is not supported in IBM BASIC.)
> Bump the current octave up one.
< Drop the current octave down one.
N n Play note n, n being 1 to 84 or 0 for a rest of current time
value. May be followed by sustain dots.
L n Sets the current time value for notes. The default is L4,
quarter or crotchet notes. The lowest possible value is 1;
values up to 64 are accepted. L1 sets whole notes, L2 sets
half notes, L4 sets quarter notes, etc.
P n Pause (rest), with n interpreted as for L n. May be followed
by sustain dots. May also be written ~.
T n Sets the number of quarter notes per minute; default is 120.
Musical names for common tempi are:
Tempo Beats Per Minute
very slow Larghissimo
very fast Prestissimo
M[LNS] Set articulation. MN (N for normal) is the default; the last
1/8th of the note’s value is rest time. You can set ML for
legato (no rest space) or MS for staccato (1/4 rest space).
Notes (that is, CDEFGAB or N command character groups) may be followed by
sustain dots. Each dot causes the note’s value to be lengthened by one-
half for each one. Thus, a note dotted once is held for 3/2 of its
undotted value; dotted twice, it is held 9/4, and three times would give
A note and its sustain dots may also be followed by a slur mark
(underscore). This causes the normal micro-rest after the note to be
filled in, slurring it to the next one. (The slur feature is not
supported in IBM BASIC.)
Whitespace in play strings is simply skipped and may be used to separate
/dev/speaker speaker device file
The speaker device appeared in FreeBSD 1.0.
Eric S. Raymond 〈email@example.com〉 June 1990
Andrew A. Chernov 〈firstname.lastname@example.org〉
Due to roundoff in the pitch tables and slop in the tone-generation and
timer hardware (neither of which was designed for precision), neither
pitch accuracy nor timings will be mathematically exact. There is no
The action of two or more sustain dots does not reflect standard musical
notation, in which each dot adds half the value of the previous dot
modifier, not half the value of the note as modified. Thus, a note
dotted once is held for 3/2 of its undotted value; dotted twice, it is
held 7/4, and three times would give 15/8. The multiply-by-3/2
interpretation, however, is specified in the IBM BASIC manual and has
been retained for compatibility.
In play strings which are very long (longer than your system’s physical
I/O blocks) note suffixes or numbers may occasionally be parsed
incorrectly due to crossing a block boundary.