Provided by: openafs-fileserver_1.4.12+dfsg-3_i386 bug

NAME

       BosConfig - Defines server processes for the BOS Server to monitor

DESCRIPTION

       The BosConfig file lists the processes that the Basic OverSeer (BOS)
       Server monitors on its server machine, and thus defines which AFS
       server processes run on the machine. It specifies how the BOS Server
       reacts when a process fails, and also defines the times at which the
       BOS Server automatically restarts processes as part of performance
       maintenance.  The file must reside in the /var/lib/openafs/local
       directory on each AFS server machine.

       A server process entry in the BosConfig file records the following
       information:

       ·   The entry type, which is one of the following:

           cron
               Designates a server process that runs periodically instead of
               continuously. The BOS Server starts a cron process only at
               specified times, not whenever it fails. All standard AFS
               process entries except "fs" are simple (there are no standard
               cron processes).

           fs  Designates a group of interdependent server processes. If one
               of the processes fails, the BOS Server must coordinate its
               restart with the restart of the other processes in the group,
               possibly by stopping them first.

               There is only one standard entry of this type, for which the
               conventional name is "fs". It combines three server processes:
               the File Server (fileserver process), the Volume Server
               (volserver process), and the Salvager (salvager process). These
               processes all operate on the same data--the AFS data stored on
               an AFS server machine’s /vicep partitions and mounted in the
               AFS filespace--but in different ways. Grouping the processes
               prevents them from attempting to access the same data
               simultaneously, which can cause corruption.

               During normal operation, the Salvager process is not active. If
               the File Server process fails, however, the BOS Server stops
               the Volume Server process and runs the Salvager process to
               correct any corruption that resulted from the failure. (The
               administrator can also issue the bos salvage command to invoke
               the Salvager process.) If the Volume Server fails, the BOS
               Server can restart it without stopping the File Server or
               running the Salvager.

           simple
               Designates a server process that runs independently of any
               other on the server machine. If a simple process fails, the BOS
               Server does not have to coordinate its restart with any other
               process.

       ·   The entry name. The conventional name for an entry in the BosConfig
           file and the associated process matches the binary filename. When
           issuing any bos command that takes the -instance argument, identify
           each process by the name used in the BosConfig file. For a list of
           the names, see the bos create reference page.

       ·   The process’s status flag, which determines whether the BOS Server
           attempts to start the process in two cases: each time the BOS
           Server itself restarts, and when the process fails. The BosConfig
           file currently uses a binary notation to indicate whether the BOS
           Server attempts to restart the process as necessary or does not
           monitor it at all. For the sake of clarity, the AFS documentation
           refers to the flags as "Run" and "NotRun" instead.  Only a system
           administrator, not the BOS Server, can change the flag.

       ·   One or more command parameters which the BOS Server invokes to
           start the process or processes associated with the entry:

           ·   A "cron" entry has two command parameters, the first the
               complete pathname to the program, and the second the time at
               which the BOS Server invokes the program.

           ·   The "fs" entry has three command parameters, each the complete
               pathname to the fileserver, volserver, and salvager programs,
               in that order.

           ·   A "simple" entry has only one command parameter, the complete
               pathname to the program.

       In addition to server process entries, the BosConfig file specifies the
       times at which the BOS Server performs two types of automatic process
       restarts:

       ·   The general restart time at which the BOS Server restarts itself
           and then each process for which the entry in the BosConfig file has
           status flag "Run". The default setting is Sunday at 4:00 a.m.

       ·   The binary restart time at which the BOS Server restarts any server
           process for which the time stamp on the binary file in the
           /usr/lib/openafs directory is later than the last restart time for
           the process. The default is 5:00 a.m.

       Although the BosConfig file is in ASCII format, do not use a text
       editor to alter it. Its format is subject to change and incorrectly
       formatted entries can prevent server startup in ways that are difficult
       to diagnose. Instead always use the appropriate commands from the bos
       command suite:

       ·   The bos create command to create an entry in the file and start the
           associated process.

       ·   The bos delete command to remove an entry from the file after the
           bos stop command is used to stop the associated process.

       ·   The bos getrestart command to display the times at which the BOS
           Server performs automatic restarts.

       ·   The bos setrestart command to set the times at which the BOS Server
           performs automatic process restarts.

       ·   The bos start command to change an entry’s status flag to "Run" and
           start the associated process.

       ·   The bos status command to display all processes listed in the file.

       ·   The bos stop command to change an entry’s status flag to "NotRun"
           and stop the associated process.

       There are also bos commands that start and stop processes without
       changing entries in the BosConfig file. The BOS Server reads the
       BosConfig file only when it starts, transferring the information into
       its memory. Thus a process’s status as represented in the BOS Server’s
       memory can diverge from its status in the BosConfig file. The following
       commands change a process’s status in the BOS Server’s memory only:

       ·   The bos restart command restarts a specified set of processes, all
           processes, or all processes other than the BOS Server.

       ·   The bos shutdown command stops a process.

       ·   The bos startup command starts a process.

SEE ALSO

       bos_create(8), bos_delete(8), bos_getrestart(8), bos_restart(8),
       bos_setrestart(8), bos_shutdown(8), bos_start(8), bos_startup(8),
       bos_status(8), bos_stop(8), bos_salvage(8), fileserver(8), salvager(8),
       volserver(8)

COPYRIGHT

       IBM Corporation 2000. <http://www.ibm.com/> All Rights Reserved.

       This documentation is covered by the IBM Public License Version 1.0.
       It was converted from HTML to POD by software written by Chas Williams
       and Russ Allbery, based on work by Alf Wachsmann and Elizabeth Cassell.