Provided by: pbuilder_0.196ubuntu1_all
pbuilderrc - configuration files for personal package builder
/etc/pbuilderrc contains default values used in the pbuilder program
The file itself is sourced by a shell script, so it is required that
the file conforms to shell script conventions.
Specifies the default location for the archived chroot image to
be created and used. This is overridden with the option
The default place which the chroot is constructed. pbuilder
will use the directory $BUILDPLACE$$. which means, that it will
use the directory and the PID to determine the directory to use.
This should obtain an unique directory for concurrent runs of
pbuilder in one machine. This is not guaranteed to happen on
network shared drives, so be aware of this fact when playing
with this option on NFS shared beowulf clusters. Change it to
something like /var/cache/pbuilder/build/$HOSTNAME/ when doing
such a thing.
pbuilder clean cleans up this directory.
Specify the default directory which the build result will be
copied over to after the building.
Unlike --buildresult command-line option. The path is not
canonicalized, so you should specify a full-path, not a relative
Specify the mirror site which contains the main Debian
Note that you cannot really use file:/ kind of URL, because the
location needs to be accessible from within the chroot.
OTHERMIRROR=deb http://xxx/xxx/ ./ [| other deb lines... ]
The lines which is added to the sources.list, delimited with |
Like deb http://local/mirror stable main|deb
The deb lines here are the ones that will appear at the top of
the sources.list inside the chroot. Be sure to follow the
syntax rules of sources.list(5). These lines appear at the
beginning of the constructed sources file, so this is the place
to list your local mirror sites; apt will then use them in
preference to the ones listed in MIRRORSITE .
To make changes on mirror site effective on update --override-
config needs to be specified.
Specify the default distribution to use. This option only
affects when doing pbuilder create or when --override-config is
specified for pbuilder update option.
Specify the default distribution to use. This option only
affects when doing pbuilder create
Specify the default distribution components to use. This option
is space-delimited. This option only affects when doing
pbuilder create or when --override-config is specified for
pbuilder update option.
Defines the proxy for http connection.
Specify the location that the packages downloaded by apt should
be cached. Setting this value to "" will cause caching to be
Specify using hard links in apt cache handling. Changing this
to no will disable hard linking and will copy the files.
It is advised to set this to no if you are using user-mode-
Specifies the default location for the user hooks directory.
This is overridden with the option --hookdir.
If this is specified, hooks are searched for in the chroot, when
running pbuilder. If it is not defined, or is an empty string,
hooks are not executed.
For details, see pbuilder.8
The options given here will be passed on to dpkg-buildpackage.
This can be useful e.g. for binary-only builds. The command-line
option --debbuildopts will be appended to any contents specified
here but may also be used to reset the list of options.
The default value is to build source and binary package.
When this value is set, pbuilder will mount these directories
Example: BINDMOUNTS="/home /mnt/test "
Do not bind-mount /
When this option is set to yes pdebuild-internal implementation
of pdebuild is used.
When this option is set to --variant=buildd pbuilder will invoke
$DEBOOTSTRAP with "--variant=buildd" option, which results in
debootstrap creating a minimal chroot for buildd instead of
trying to create a minimal installation chroot. DEBOOTSTRAP is
another directive in this file.
Use this option to switch the implementation of debootstrap.
Known implementations of debootstrap are cdebootstrap and
EXTRAPACKAGES="ccache lintian XXX"
Specifies extra packages which the system should install in the
chroot on pbuilder create. This is a space-delimited list.
Also this is installed on pbuilder build
Uses this variable as DEBIAN_BUILDARCH. This trick can be used
for other environmental variables as well.
Specify yes when it is desired to mount /proc interface. It is
usually a good idea, since there are many software which fail
miserably when there is no /proc being mounted.
Specify yes when it is desired to mount /dev/pts interface. It
is usually a good idea, since there are many software which fail
miserably when there is no /dev/pts being mounted.
Specify the packages to be removed on creation of base.tgz
Leaving lilo in the chroot is like keeping a timebomb...
DEBEMAIL=Maintainer Name <Mail@Address>
If this was specified, dpkg-buildpackage command will be passed
with the necessary sponsorship option -mMaintainer Name
<Mail@Address> on building. Overridden with --debemail command-
The default configuration for pbuilder is empty for this value.
This option is used on invocation of fakeroot for dpkg-
buildpackage in pdebuild
This option is used on invocation of pbuilder build in pdebuild
This option is used by various parts of pbuilder to satisfy
(i.e. install) the build-dependencies of a package. There are
The "experimental" implementation, "pbuilder-satisfydepends-
experimental", which might be useful to pull packages from
experimental or from repositories with a low APT Pin Priority.
The "aptitude" implementation, which will resolve build-
dependencies and build-conflicts with aptitude which helps
dealing with complex cases but does not support unsigned APT
The "gdebi" implementation, which will resolve build-
dependencies using gdebi tool, faster than classic
implementation, and does not require installation of a dummy
package like the aptitude implementation.
The "classic" implementation, which was the original
implementation used until 0.172.
The default is now "aptitude".
The uid to be used inside chroot. It should ideally not collide
with user-id outside the chroot, to avoid user inside chroot
having access to processes owned by the user id outside the
The user name of the user the build will run as. Specifying
this will enable the use of fakeroot inside pbuilder.
Note that this will require fakeroot to be installed within the
chroot, and fakeroot will automatically be installed. And
-rfakeroot will be added to DEBBUILDOPTS
Configures where the apt configuration files are copied from.
By default, this value is empty, allowing the usual
configuration options to take effect. Setting this variable
overrides other options.
Sets timeout time. Build will be stoped with SIGTERM after the
Sets interactiveness of pbuilder run. Setting this value to
blank will cause the pbuilder run to be interactive. Change
this value when noninteractive upgrades do not work.
Whether to use DEVFS or not.
Set the UID and GID of the files built as result. They probably
need to be set to numeric UID values, so that it works the same
inside the chroot and outside the chroot.
If sudo is used, the values specified by sudo is used. They are
SUDO_UID, and SUDO_GID. The default value is 0
When this value is set to yes, pdebuild will invoke debsign
command after building.
The extension of filename used in pkgname-logfile option.
Always run with --pkgname-logfile option, and create a logfile
named after the package name.
Specify what pbuilder implementation to use for pdebuild. The
currently possible values are pbuilder and cowbuilder
Always run with -B "--autocleanaptcache" option.
Initial coding, and main maintenance is done by Junichi Uekawa
<email@example.com>. User hooks code added by Dale Amon <firstname.lastname@example.org>
The homepage is available at http://pbuilder.alioth.debian.org
/usr/share/doc/pbuilder/pbuilder-doc.html, pbuilder(8), pdebuild(1)