Provided by: libsane_1.0.20-13ubuntu2_i386 bug

NAME

       sane-artec_eplus48u - SANE backend for the scanner Artec E+ 48U and re-
       badged models

DESCRIPTION

       The sane-artec_eplus48u library implements a SANE (Scanner  Access  Now
       Easy)  backend  that  provides  access  to several USB flatbed scanners
       using the GT6816 chipset like the Artec E+ 48U.  These scanners have  a
       contact image sensor (CIS) and an USB interface.

       A    complete   list   of   supported   devices   can   be   found   on
       http://www.sane-project.org/sane-supported-devices.html.

       This is  ALPHA  software.  Especially  if  you  test  new  or  untested
       scanners,  keep  your  hand at the scanner’s plug and unplug it, if the
       head bumps at the end of the scan area.

       If you own a scanner other than the ones mentioned  on  the  list  that
       works  with  this  backend,  please  let  us  know  this by sending the
       scanner’s exact model name and the USB vendor  and  product  ids  (e.g.
       from /proc/bus/usb/devices, sane-find-scanner or syslog) to me. Even if
       the scanner’s name is only slightly different from the models mentioned
       above, please let me know.

KERNEL ISSUES

       If libusb-0.1.6 or later is installed, this section can be skipped. The
       scanner should be found by sane-find-scanner without  further  actions.
       For   setting   permissions   and   general  USB  information  look  at
       sane-usb(5).

       When you are using the scanner module, a Linux kernel 2.4.12  or  newer
       is required.

FIRMWARE FILE

       You  need  a  firmware  file  for  your  scanner.  That’s  a small file
       containing software that will be uploaded to the scanner’s memory.  For
       the  scanners  mentioned  above,  it’s  usually  named  Artec48.usb  or
       1200.usb. You can find it on the installation CD that was  provided  by
       the manufacturer, normally in the directory Win98, WinMe or similar. If
       the Windows-driver is installed on your computer,  then  you  can  also
       find the firmware file under c:\windows\system32\drivers.

CONFIGURATION

       The  contents  of  the  artec_eplus48u.conf file is a list of usb lines
       containing vendor and product ids that correspond to USB scanners.  The
       file  can  also  contain  option lines.  Empty lines and lines starting
       with a hash mark (#) are ignored.  The scanners are autodetected by usb
       vendor_id   product_id  statements  which  are  already  included  into
       artec_eplus48u.conf .  "vendor_id"  and  "product_id"  are  hexadecimal
       numbers that identify the scanner.

       Every usb section can have additional options

       artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb
              The path to the firmware file. This option is required.

       redGamma 1.0

       greenGamma 1.0

       blueGamma 1.0

       masterGamma 1.9
              These  are  the  default gamma values. If you set the "Defaults"
              option with a frontend, then the gamma options are reset to  the
              values specified here.

       redOffset 0x28

       greenOffset 0x2f

       blueOffset 0x2f

       redExposure 0xa7

       greenExposure 0x116

       blueExposure 0xdc
              These  are  the default values for offset and exposure time. You
              can e.g. change them to speed up calibration, if you don’t  want
              to save the calibration data to disk.

       vendorString Artec

       modelString E+ 48U
              By  default,  the  scanner is reported as "Artec E+ 48U". If you
              don’t like this, e.g.  because you have an Tevion MD 9693,  then
              change the options accordingly.

FILES

       /usr/local/etc/sane.d/artec_eplus48u.conf
              The   backend   configuration  file  (see  also  description  of
              SANE_CONFIG_DIR below).

       /usr/local/lib/sane/libsane-artec_eplus48u.a
              The static library implementing this backend.

       /usr/local/lib/sane/libsane-artec_eplus48u.so
              The shared library implementing this backend (present on systems
              that support dynamic loading).

ENVIRONMENT

       SANE_CONFIG_DIR
              This environment variable specifies the list of directories that
              may contain the configuration file.  Under UNIX, the directories
              are  separated  by a colon (‘:’), under OS/2, they are separated
              by a semi-colon  (‘;’).   If  this  variable  is  not  set,  the
              configuration  file  is  searched  in  two  default directories:
              first,  the  current  working  directory  (".")  and   then   in
              /usr/local/etc/sane.d.  If the value of the environment variable
              ends with the directory separator character,  then  the  default
              directories   are   searched   after  the  explicitly  specified
              directories.    For   example,   setting   SANE_CONFIG_DIR    to
              "/tmp/config:"  would  result  in directories "tmp/config", ".",
              and "/usr/local/etc/sane.d" being searched (in this order).

       SANE_DEBUG_ARTEC_EPLUS48U
              If the library was compiled with  debug  support  enabled,  this
              environment  variable controls the debug level for this backend.
              Higher debug levels increase the verbosity of the output.

              Example: export SANE_DEBUG_ARTEC_EPLUS48U=3

SEE ALSO

       sane(7), sane-usb(5)

AUTHOR

       Michael Herder
       This backend is based on the  gt68xx  test-program  written  by  Sergey
       Vlasov,  Andreas  Nowack,  and  David Stevenson. Thanks to everyone who
       tested the backend or reported bugs.
       This man page is based on man sane-gt68xx, written  by  Henning  Meier-
       Geinitz.

BUGS

       This  backend  has  been tested on Linux only. If you are using it on a
       different platform, please contact us.

       Interpolation with 1200 dpi is weak.

       Support for buttons is missing due to missing support in SANE.

       Please      contact      us      if      you      find      a      bug:
       http://www.sane-project.org/bugs.html.

                                  11 Jul 2008           sane-artec_eplus48u(5)