Provided by: snmpd_22.214.171.124~dfsg0ubuntu1-0ubuntu2_i386
snmptrapd.conf - configuration file for the Net-SNMP notification
The Net-SNMP notification receiver (trap daemon) uses one or more
configuration files to control its operation and how incoming traps
(and INFORM requests) should be processed. This file (snmptrapd.conf)
can be located in one of several locations, as described in the
snmp_config(5) manual page.
Previously, snmptrapd would accept all incoming notifications, and log
them automatically (even if no explicit configuration was provided).
Starting with release 5.3, access control checks will be applied to
incoming notifications. If snmptrapd is run without a suitable
configuration file (or equivalent access control settings), then such
traps WILL NOT be processed. See the section ACCESS CONTROL for more
As with the agent configuration, the snmptrapd.conf directives can be
divided into four distinct groups.
defines a list of listening addresses, on which to receive
incoming SNMP notifications. See the section LISTENING
ADDRESSES in the snmpd(8) manual page for more information about
the format of listening addresses.
The default behaviour is to listen on UDP port 162 on all IPv4
disables support for the NOTIFICATION-LOG-MIB. Normally the
snmptrapd program keeps a record of the traps received, which
can be retrieved by querying the nlmLogTable and
nlmLogvariableTable tables. This directive can be used to
suppress this behaviour.
See the snmptrapd(8) manual page and the NOTIFICATION-LOG-MIB
disables the logging of notifications altogether. This is
useful if the snmptrapd application should only run traphandle
hooks and should not log traps to any location.
do not fork from the calling shell.
defines a file in which to store the process ID of the
notification receiver. By default, this ID is not saved.
Starting with release 5.3, it is necessary to explicitly specify who is
authorised to send traps and informs to the notification receiver (and
what types of processing these are allowed to trigger). This uses an
extension of the VACM model, used in the main SNMP agent.
There are currently three types of processing that can be specified:
log log the details of the notification - either in a
specified file, to standard output (or stderr), or via
syslog (or similar).
pass the details of the trap to a specified handler
program, including embedded perl.
net forward the trap to another notification receiver.
In the following directives, TYPES will be a (comma-separated) list of
one or more of these tokens. Most commonly, this will typically be
log,execute,net to cover any style of processing for a particular
category of notification. But it is perfectly possible (even desirable)
to limit certain notification sources to selected processing only.
authCommunity TYPES COMMUNITY [SOURCE [OID | -v VIEW ]]
authorises traps (and SNMPv2c INFORM requests) with the
specified community to trigger the types of processing listed.
By default, this will allow any notification using this
community to be processed. The SOURCE field can be used to
specify that the configuration should only apply to
notifications received from particular sources - see
snmpd.conf(5) for more details.
authUser TYPES [-s MODEL] USER [LEVEL [OID | -v VIEW ]]
authorises SNMPv3 notifications with the specified user to
trigger the types of processing listed. By default, this will
accept authenticated requests. (authNoPriv or authPriv). The
LEVEL field can be used to allow unauthenticated notifications
(noauth), or to require encryption (priv), just as for the SNMP
With both of these directives, the OID (or -v VIEW) field can be
used to retrict this configuration to the processing of
Note: Unlike the VACM processing described in RFC 3415, this
view is only matched against the snmpTrapOID value of the
incoming notification. It is not applied to the payload
varbinds held within that notification.
authGroup TYPES [-s MODEL] GROUP [LEVEL [OID | -v VIEW ]]
authAccess TYPES [-s MODEL] GROUP VIEW [LEVEL [CONTEXT]]
setAccess GROUP CONTEXT MODEL LEVEL PREFIX VIEW TYPES
authorise notifications in the specified GROUP (configured using
the group directive) to trigger the types of processing listed.
See snmpd.conf(5) for more details.
createUser username (MD5|SHA) authpassphrase [DES|AES]
See the snmpd.conf(5) manual page for a description of how to
create SNMPv3 users. This is roughly the same, but the file
name changes to snmptrapd.conf from snmpd.conf.
will disable the above access control checks, and revert to the
previous behaviour of accepting all incoming notifications.
specify the format used to display SNMPv1 TRAPs and SNMPv2
notifications respectively. Note that SNMPv2c and SNMPv3 both
use the same SNMPv2 PDU format.
See snmptrapd(8) for the layout characters available.
instructs the receiver to ignore authenticationFailure traps.
Note: This currently only affects the logging of such
notifications. authenticationFailure traps will still be
passed to trap handler scripts, and forwarded to other
notification receivers. This behaviour should not be
relied on, as it is likely to change in future versions.
specifies where notifications should be logged - to standard
output, standard error, a specified file or via syslog. See the
section LOGGING OPTIONS in the snmpcmd(1) manual page for
specifies various characteristics of how OIDs and other values
should be displayed. See the section OUTPUT OPTIONS in the
snmpcmd(1) manual page for details.
enables specialised logging of event-related notifications from
the (long obsolete) M2M-MIB.
As well as logging incoming notifications, they can also be forwarded
on to another notification receiver, or passed to an external program
for specialised processing.
traphandle OID|default PROGRAM [ARGS ...]
invokes the specified program (with the given arguments)
whenever a notification is received that matches the OID token.
For SNMPv2c and SNMPv3 notifications, this token will be
compared against the snmpTrapOID value taken from the
notification. For SNMPv1 traps, the generic and specific trap
values and the enterprise OID will be converted into the
equivalent OID (following RFC 2576).
Typically, the OID token will be the name (or numeric OID) of a
NOTIFICATION-TYPE object, and the specified program will be
invoked for notifications that match this OID exactly. However
this token also supports a simple form of wildcard suffixing.
By appending the character ´*’ to the OID token, the
corresponding program will be invoked for any notification based
within subtree rooted at the specified OID. For example, an OID
token of .126.96.36.199.4.1* would match any enterprise specific
notification (including the specified OID itself). An OID token
of .188.8.131.52.4.1.* would would work in much the same way, but
would not match this exact OID - just notifications that lay
strictly below this root. Note that this syntax does not
support full regular expressions or wildcards - an OID token of
the form oid.*.subids is not valid.
If the OID field is the token default then the program will be
invoked for any notification not matching another (OID specific)
Details of the notification are fed to the program via its standard
input. Note that this will always use the SNMPv2-style notification
format, with SNMPv1 traps being converted as per RFC 2576, before being
passed to the program. The input format is as follows, one entry per
The name of the host that sent the notification, as
determined by gethostbyaddr(3).
The IP address of the host that sent the notification.
A list of variable bindings describing the contents of
the notification, one per line. The first token on each
line (up until a space) is the OID of the varind, and the
remainder of the line is its value. The format of both
of these are controlled by the outputOption directive (or
The first OID should always be SNMPv2-MIB::sysUpTime.0,
and the second should be SNMPv2-MIB::snmpTrapOID.0. The
remaining lines will contain the payload varbind list.
For SNMPv1 traps, the final OID will be
A traptoemail script has been included in the Net-SNMP
package that can be used within a traphandle directive:
traphandle default /usr/bin/perl /usr/bin/traptoemail -s
mysmtp.somewhere.com -f email@example.com
forward OID|default DESTINATION
forwards notifications that match the specified OID to another
receiver listening on DESTINATION. The interpretation of OID
(and default) is the same as for the traphandle directive).
See the section LISTENING ADDRESSES in the snmpd(8) manual page
for more information about the format of listening addresses.
o The daemon blocks while executing the traphandle commands.
(This should be fixed in the future with an appropriate signal
catch and wait() combination).
o All directives listed with a value of "yes" actually accept a
range of boolean values. These will accept any of 1, yes or
true to enable the corresponding behaviour, or any of 0, no or
false to disable it. The default in each case is for the
feature to be turned off, so these directives are typically only
used to enable the appropriate behaviour.
snmp_config(5), snmptrapd(8), syslog(8), variables(5), snmpd.conf(5),