Provided by: sysklogd_1.5-5ubuntu4_i386
syslog.conf - syslogd(8) configuration file
The syslog.conf file is the main configuration file for syslogd(8)
which logs system messages on *nix systems. This file specifies rules
for logging. For special features see the sysklogd(8) manpage.
Every rule consists of two fields, a selector field and an action
field. These two fields are separated by one or more spaces or tabs.
The selector field specifies a pattern of facilities and priorities
belonging to the specified action.
Lines starting with a hash mark (‘‘#’’) and empty lines are ignored.
This release of syslogd is able to understand an extended syntax. One
rule can be divided into several lines if the leading line is
terminated with an backslash (‘‘\’’).
The selector field consists of two parts, a facility and a priority,
separated by a period (‘‘.’’). Both parts are case insensitive and can
also be specified as decimal numbers corresponding to the definitions
in <syslog.h>. It is obviously safer to use the names than the
numbers. Both facilities and priorities are described in syslog(3).
The names mentioned below correspond to the similar LOG_-values in
The facility is one of the following keywords: auth, authpriv, cron,
daemon, ftp, kern, lpr, mail, mark, news, security (same as auth),
syslog, user, uucp and local0 through local7. The keyword security is
deprecated and mark is only for internal use and therefore should not
be used in applications. The facility specifies the subsystem that
produced the message, e.g. all mail programs log with the mail facility
(LOG_MAIL) if they log using syslog.
In most cases anyone can log to any facility, so we rely on convention
for the correct facility to be chosen. However, generally only the
kernel can log to the "kern" facility. This is because the
implementation of openlog() and syslog() in glibc does not allow
logging to the "kern" facility. Klogd circumvents this restriction
when logging to syslogd by reimplementing those functions itself.
The priority is one of the following keywords, in ascending order:
debug, info, notice, warning, warn (same as warning), err, error (same
as err), crit, alert, emerg, panic (same as emerg). The keywords warn,
error and panic are deprecated and should not be used anymore. The
priority defines the severity of the message
The behavior of the original BSD syslogd is that all messages of the
specified priority and higher are logged according to the given action.
This syslogd(8) behaves the same, but has some extensions.
In addition to the above mentioned names the syslogd(8) understands the
following extensions: An asterisk (‘‘*’’) stands for all facilities or
all priorities, depending on where it is used (before or after the
period). The keyword none stands for no priority of the given
Multiple facilities may be specified for a single priority pattern in
one statement using the comma (‘‘,’’) operator to separate the
facilities. You may specify as many facilities as you want. Remember
that only the facility part from such a statement is taken, a priority
part would be skipped. For example, it means that instead of writing
"kern.info,auth.info" you just write "kern,auth.info", skipping the 1st
Multiple selectors may be specified for a single action using the
semicolon (‘‘;’’) separator. In this case the selectors are processed
from left to right, with each selector being able to overwrite the
preceding ones. Using this behavior you can exclude some priorities
from the pattern.
This syslogd(8) has a syntax extension to the original BSD source,
which makes its use more intuitive. You may precede every priority
with an equation sign (‘‘=’’) to specify that syslogd should only refer
to this single priority and not this priority and all higher
You may also precide the priority with an exclamation mark (‘‘!’’) if
you want syslogd to ignore this priority and all higher priorities.
You may even use both, the exclamation mark and the equation sign if
you want syslogd to ignore only this single priority. If you use both
extensions than the exclamation mark must occur before the equation
sign, just use it intuitively.
The action field of a rule describes the abstract term ‘‘logfile’’. A
‘‘logfile’’ need not to be a real file, btw. The syslogd(8) provides
the following actions.
Typically messages are logged to real files. The file must be
specified as an absolute pathname.
You may prefix each entry with a minus sign (‘‘-’’) to avoid syncing
the file after each log message. Note that you might lose information
if the system crashes right after a write attempt. Nevertheless this
might give you back some performance, especially if you run programs
that use logging in a very verbose manner.
This version of syslogd(8) has support for logging output to named
pipes (fifos). A fifo or named pipe can be used as a destination for
log messages by prepending a pipe symbol (‘‘|’’) to the name of the
file. This is handy for debugging. Note that the fifo must be created
with the mkfifo(1) command before syslogd(8) is started.
Terminal and Console
If the file you specified is a tty, special tty-handling is done, same
This syslogd(8) provides full remote logging, i.e. is able to send
messages to a remote host running syslogd(8) and to receive messages
from remote hosts. The remote host won’t forward the message again, it
will just log them locally. To forward messages to another host,
prepend the hostname with the at sign (‘‘@’’).
Using this feature you’re able to collect all syslog messages on a
single host, if all other machines will log remotely to that. This
reduces administration needs.
List of Users
Usually critical messages are also directed to ‘‘root’’ on that
machine. You can specify a list of users that shall get the message by
simply writing their usernames. You may specify more than one user by
separating the usernames with commas (‘‘,’’). If they’re logged in
they will receive the log messages.
Everyone logged on
Emergency messages often go to all users currently online to notify
them that something strange is happening with the system. To specify
this wall(1)-feature use an asterisk (‘‘*’’).
Here are some examples, partially taken from a real existing site and
configuration. Hopefully they answer all questions about configuring
syslogd(8), if not, drop me (Joey) a line.
# Store critical stuff in critical
This will store all messages of priority crit in the file
/var/adm/critical, with the exception of any kernel messages.
# Kernel messages are stored in the kernel file,
# critical messages and higher ones also go
# to another host and to the console
The first rule directs any message that has the kernel facility to the
file /var/adm/kernel. (But recall that only the kernel itself can log
to this facility.)
The second statement directs all kernel messages of priority crit and
higher to the remote host finlandia. This is useful, because if the
host crashes and the disks get irreparable errors you might not be able
to read the stored messages. If they’re on a remote host, too, you
still can try to find out the reason for the crash.
The third rule directs kernel messages of priority crit and higher to
the actual console, so the person who works on the machine will get
The fourth line tells the syslogd to save all kernel messages that come
with priorities from info up to warning in the file /var/adm/kernel-
This is an example of the 2nd selector overwriting part of the first
one. The first selector selects kernel messages of priority info and
higher. The second selector filters out kernel messages of priority
error and higher. This leaves just priorities info, notice and warning
to get logged.
# The tcp wrapper logs with mail.info, we display
# all the connections on tty12
This directs all messages that use mail.info (in source LOG_MAIL |
LOG_INFO) to /dev/tty12, the 12th console. For example the tcpwrapper
tcpd(8) uses this as its default.
# Write all mail related logs to a file
This pattern matches all messages that come with the mail facility,
except for the info priority. These will be stored in the file
# Log all mail.info and news.info messages to info
This will extract all messages that come either with mail.info or with
news.info and store them in the file /var/adm/info.
# Log info and notice messages to messages file
This lets the syslogd log all messages that come with either the info
or the notice priority into the file /var/log/messages, except for all
messages that use the mail facility.
# Log info messages to messages file
This statement causes the syslogd to log all messages that come with
the info priority to the file /var/log/messages. But any message
coming either with the mail or the news facility will not be stored.
# Emergency messages will be displayed using wall
This rule tells the syslogd to write all emergency messages to all
currently logged in users. This is the wall action.
# Messages of the priority alert will be directed
# to the operator
This rule directs all messages of priority alert or higher to the
terminals of the operator, i.e. of the users ‘‘root’’ and ‘‘joey’’ if
they’re logged in.
This rule would redirect all messages to a remote host called
finlandia. This is useful especially in a cluster of machines where
all syslog messages will be stored on only one machine.
CONFIGURATION FILE SYNTAX DIFFERENCES
Syslogd uses a slightly different syntax for its configuration file
than the original BSD sources. Originally all messages of a specific
priority and above were forwarded to the log file. The modifiers
‘‘=’’, ‘‘!’’ and ‘‘-’’ were added to make the syslogd more flexible
and to use it in a more intuitive manner.
The original BSD syslogd doesn’t understand spaces as separators
between the selector and the action field.
Configuration file for syslogd
The effects of multiple selectors are sometimes not intuitive. For
example ‘‘mail.crit,*.err’’ will select ‘‘mail’’ facility messages at
the level of ‘‘err’’ or higher, not at the level of ‘‘crit’’ or higher.
Also, if you specify a selector with an exclamation mark in it which
isn’t preceded by a corresponding selector without an exclamation mark,
nothing will be logged. Intuitively, the selector ‘‘ftp.!alert’’ on
its own will select all ftp messages with priorities less than alert.
In fact it selects nothing. Similarly ‘‘ftp.!=alert’’ might reasonably
be expected to select all ftp messages other than those with priority
alert, but again it selects nothing. It seems the selectors with
exclamation marks in them should only be used as ‘filters’ following
selectors without exclamation marks.
Finally, using a backslash to divide a line into two doesn’t work if
the backslash is used immediately after the end of the selector,
without intermediate whitespace.
sysklogd(8), klogd(8), logger(1), syslog(2), syslog(3).
The syslogd is taken from BSD sources, Greg Wettstein
<firstname.lastname@example.org> performed the port to Linux, Martin Schulze
<email@example.com> fixed some bugs, added several new features and
took over maintenance.