Provided by: libggi2_2.2.2-5ubuntu1_i386
libggi - A fast, simple, small and flexible user-space graphics library
LibGGI is a fast, simple, small and flexible user-space graphics
library developed by the GGI Project. It attempts to abstract the many
different graphics output systems existing under Unix (and in the
future, other platforms). The support for all of these different types
of displays and hardware are provided by dynamically-loaded mini-
libraries. LibGGI can transparently (to the LibGGI-using application)
display graphics on an X window, under SVGAlib, fbcon (Linux
framebuffer driver), or the glide library, through their respective
graphics drivers, or targets. There are also some other targets which
display through another target, such as multi to display simultaneously
on multiple displays at once, and tile to tile your display to
LibGGI supports acceleration of graphics primitives where possible.
LibGGI is a very generic piece of software, that will run on about
every platform that has remotely heard of POSIX (ports to other systems
such as Win32 are available, too) and on many display subsystems.
The following outlines the environment variables, intended for the
user, which affect the behaviour of LibGGI:
If set, LibGGI assumes that you want to use the X target. This
setting is overridden by the GGI_DISPLAY variable.
Specifies the default target used when the application calls
ggiOpen(3) with NULL argument.
The default target is specified using a target-spec:
target:targetargs where target is the name of the target, and
targetargs are any target-specific arguments.
If neither this variable nor DISPLAY is set, then the following
targets are tried in order until one works: fbdev, svga, aa
GGI_INPUT_target_n, GGI_INPUT_target, GGI_INPUT
GGI_INPUT_target specifies extra LibGII input sources and/or
filters for visuals using target
Multiple inputs can be specified by enclosing each input-spec in
parentheses and separating them with semicolons: (i1):(i2):...
The inputs specified by GGI_INPUT_target_n are only opened at
the n’th call of ggiOpen(3). This is used for misbehaving
applications that do not allow the user to specify inputs for
the different targets that it opens.
The GGI_INPUT variable specifies input settings for all other
targets not specified using the other two variable forms.
Specifies the default mode, which is used for mode negotiation
with LibGGI applications. Specifically, when GGI_AUTO or
GT_AUTO are specified in a mode setting call they will be
replaced with values from GGI_DEFMODE before calling the
target’s own ggiSetMode(3) implementation.
The format is: (all on one line) S w x h x depth V w x h D w x h
F frames [scheme depth size] Anything and everything can be
omitted, except tokens indicating what the next token is.
Any omitted values default to GGI_AUTO (or GT_AUTO for the
graphtype). Whitespace and ’.’ symbols are ignored. Character
tokens are case-insensitive. If certain values are not
possible, they are overridden by the target.
S Denotes the visible size of the visual. Totally
optional, as dimensions without a specifier are
considered to be the visible dimensions.
w and h are the width and height in pixels.
V Denotes virtual size, the total drawing area available to
the application. The virtual size must be equal or
greater than the visible size.
D Denotes the number of dots per pixel. For graphic modes,
this is always 1x1, and for text modes, this is the size
of the character cell.
F Denotes number of frames available to the application.
Applications can switch between different frames for
 Delimits the graphic type.
scheme One of:
· C : GT_TRUECOLOR
· P : GT_PALETTE
· K : GT_GREYSCALE
· T : GT_TEXT
depth Pixel depth in number of bits.
size Size of pixel in number of bits, including
Instead of scheme, depth, size, it is also possible to
specify the graphtype by using one of the following:
The debugging level for LibGGI:
0 or unset
debug output is off; debugging is off
255 all debug output is on
You may also bitwise-or any of the following together:
· 2 : debug core
· 4 : debug mode setting
· 8 : debug color handling
· 16 : debug drawing
· 32 : misc debugging output
· 64 : debug dynamic library handling
· 128 : debug event handling
The debugging output can be quite verbose and in most cases you
should redirect stderr so that it does not interfere with your
Turn on synchronous debugging output, flushing the output
buffers before returning from DPRINT calls.
Override compiled-in path to global config files (Win32 only,
but not Cygwin).
If set, causes a new virtual console to be allocated for some
Linux-console-based targets (currently fbdev and glide).
This variable specifies the framerate for targets emulating
synchronous mode. The default is 20fps. If you are experiencing
problems with the X target over relatively slow remote
connections it might be due to connection overload. You might
want to try with a lower GGI_MANSYNC_FPS setting.
Example GGI_DISPLAY settings:
# see ASCII art flying GGIs
$ GGI_DISPLAY=aa ./flying_ggis
# see demo on both machine "crono" next door and local
# X at the same time
$ GGI_DISPLAY=multi:(Xlib:crono:0.0):(X::0.0) ./demo
Example GGI_INPUT string:
$ export GGI_INPUT=linux-mouse:auto
# for "multi" target only
$ export GGI_INPUT_multi=linux-mouse:auto
Examples of GGI_DEFMODE strings:
· 640x480 : just the visible size
· 640x480#640x960 : same size, but double-height virtual screen
· #1024x768 : only virtual size defined
· 80x40[T] : (default-fontsized) text mode with 80x40 characters
· #x100[T] : text mode with 100 virtual lines
· 640x400 : 640x400 at 8 bits per pixel
· 640x480[GT_8BIT] : same as above, but palettized
· 320x200[C15] : 320x200 with 32768 colors (hicolor)
· 320x200[C/16] : 320x200 with 16-bit pixels (also hicolor)
· 320x200[C24/32], 320x200[GT_32BIT] : 320x200, with 32-bit pixels
for 16777216 colors (truecolor)
· 640x480F2[GT_16BIT] : 16-bit-color 640x480 with two buffers
libgii(7), ggiInit(3), display-aa(7), display-directx(7), display-
fbdev(7), display-file(7), display-glide(7), display-macosx(7),
display-memory(7), display-monotext(7), display-multi(7), display-
palemu(7), display-sub(7), display-svgalib(7), display-tele(7),
display-tile(7), display-trueemu(7), display-vcsa(7), display-vgl(7),