Provided by: openafs-client_1.4.12+dfsg-3_i386
backup_diskrestore - Restores the entire contents of a partition
backup diskrestore -server <machine to restore>
-partition <partition to restore>
[-portoffset <TC port offset>+]
[-newserver <destination machine>]
[-newpartition <destination partition>]
[-extension <new volume name extension>]
[-n] [-localauth] [-cell <cell name>] [-help]
backup di -s <machine to restore> -pa <partition to restore>
[-po <TC port offset>+] [-news <destination machine>]
[-newp <destination partition>]
[-e <new volume name extension>] [-n] [-l]
[-c <cell name>] [-h]
The backup diskrestore command restores all of the volumes for which
the Volume Location Database (VLDB) lists a read/write site on the
partition specified with the -server and -partition arguments. It is
useful if a disk or machine failure corrupts or destroys the data on an
entire partition. (To restore any read-only or backup volumes that
resided on the partition, use the vos release and vos backup commands,
respectively, after restoring the read/write version.)
If restoring only selected volumes to a single site, it is usually more
efficient to use the backup volrestore command. To restore multiple
volumes to many different sites, use the backup volsetrestore command.
(If the "FILE YES" instruction appears in the
/var/lib/openafs/backup/CFG_device_name file on the Tape Coordinator
machine associated with the specified port offset, then the Backup
System restores data from the backup data file listed for that port
offset in the Tape Coordinator’s /var/lib/openafs/backup/tapeconfig
file, instead of from tape. For the sake of clarity, the following text
refers to tapes only, but the Backup System handles backup data files
in much the same way.)
The Backup System determines whether the read/write or backup version
of each volume was dumped more recently, and restores the dumps of that
version, starting with the most recent full dump. It resets the
creation timestamp of each restored volume to the date and time at
which it begins restoring the volume (the creation timestamp appears in
the "Creation" field of the output from the vos examine and vos listvol
If all of the full and incremental dumps of all relevant volumes were
not written on compatible tape devices, use the -portoffset argument to
list multiple port offset numbers in the order in which the tapes are
needed (first list the port offset for the full dump, second the port
offset for the level 1 incremental dump, and so on). This implies that
the full dumps of all relevant volumes must have been written to a type
of tape that the first Tape Coordinator can read, the level 1
incremental dumps to a type of tape the second Tape Coordinator can
read, and so on. If dumps are on multiple incompatible tape types, use
the backup volrestore command to restore individual volumes, or the
backup volsetrestore command after defining groups of volumes that were
dumped to compatible tape types. For further discussion, see the IBM
AFS Administration Guide.
By default, the Backup System restores the contents of the specified
partition to that same partition. To restore the contents to an
alternate site, combine the following options as indicated. The Backup
System removes each volume from the original site, if it still exists,
and records the change of site in the VLDB.
· To restore to a different partition on the same file server
machine, provide the -newpartition argument.
· To restore to the partition with the same name on a different file
server machine, provide the -newserver argument.
· To restore to a completely different site, combine the -newserver
and -newpartition arguments.
By default, the Backup System overwrites the contents of existing
volumes with the restored data. To create a new volume to house the
restored data instead, use the -extension argument. The Backup System
creates the new volume at the site designated by the -newserver and
-newpartition arguments if they are used or the -server and -partition
arguments otherwise. It derives the volume name by adding the extension
to the read/write base name listed in the VLDB, and creates a new VLDB
entry. The command does not affect the existing volume in any way.
However, if a volume with the specified extension also already exists,
the command overwrites it.
To print out a list of the tapes containing the needed dumps, without
actually performing the restore operation, include the -n flag along
with the other options to be used on the actual command.
The Tape Coordinator’s default response to this command is to access
the first tape it needs by invoking the "MOUNT" instruction in the
local CFG_device_name file, or by prompting the backup operator to
insert the tape if there is no "MOUNT" instruction. However, if the
"AUTOQUERY NO" instruction appears in the CFG_device_name file, or if
the issuer of the butc command included the -noautoquery flag, the Tape
Coordinator instead expects the tape to be in the device already. If
it is not, or is the wrong tape, the Tape Coordinator invokes the
"MOUNT" instruction or prompts the operator. It also invokes the
"MOUNT" instruction or prompts for any additional tapes needed to
complete the restore operation; the backup operator must arrange to
If issuing this command to recover data after a disk crash or other
damage, be sure not to issue the vos syncserv command first. Doing so
destroys the VLDB record of the volumes that resided on the partition.
-server <machine to restore>
Names the file server machine that the VLDB lists as the site of
the volumes that need to be restored.
-partition <partition to restore>
Names the partition that the VLDB lists as the site of the volumes
that need to be restored.
-portoffset <TC port offset>+
Specifies one or more port offset numbers (up to a maximum of 128),
each corresponding to a Tape Coordinator to use in the operation.
If there is more than one value, the Backup System uses the first
one when restoring the full dump of each volume, the second one
when restoring the level 1 incremental dump of each volume, and so
on. It uses the final value in the list when restoring dumps at the
corresponding depth in the dump hierarchy and at all lower levels.
Provide this argument unless the default value of 0 (zero) is
appropriate for all dumps. If 0 is just one of the values in the
list, provide it explicitly in the appropriate order.
-newserver <destination machine>
Names an alternate file server machine to which to restore the
volumes. If this argument is omitted, the volumes are restored to
the file server machine named by the -server argument.
-newpartition <destination partition>
Names an alternate partition to which to restore the data. If this
argument is omitted, the volumes are restored to the partition
named by the -partition argument.
-extension <new volume name extension>
Creates a new volume for each volume being restored, to house the
restored data. The Backup System derives the new volume’s name by
appending the specified string to the read/write base name listed
in the VLDB, and creates a new VLDB volume entry. The Backup System
preserves the contents of the volumes on the partition, if any
still exist. Any string other than ".readonly" or ".backup" is
acceptable, but the combination of the base name and extension
cannot exceed 22 characters in length. To use a period to separate
the extension from the name, specify it as the first character of
the string (as in ".rst", for example).
-n Displays a list of the tapes necessary to perform the requested
restore, without actually performing the operation.
Constructs a server ticket using a key from the local
/etc/openafs/server/KeyFile file. The backup command interpreter
presents it to the Backup Server, Volume Server and VL Server
during mutual authentication. Do not combine this flag with the
-cell argument. For more details, see backup(8).
-cell <cell name>
Names the cell in which to run the command. Do not combine this
argument with the -localauth flag. For more details, see backup(8).
Prints the online help for this command. All other valid options
If a tape error occurs during the restore operation, the Tape
Coordinator displays the following messages:
Restore operation on volume I<name> failed due to tape error
Do you want to continue (y/n)?
where name is the name of the volume that was being restored when the
tape error occurred. Enter the value y to continue the operation
without restoring the indicated volume or the value "n" to terminate
the operation. In the latter case, the operator can then attempt to
determine the cause of the tape error.
If the issuer includes the -n flag with the command, the following
string appears at the head of the list of the tapes necessary to
perform the restore operation:
The following command restores the volumes for which the VLDB lists a
read/write site on the /vicepd partition of the machine "fs5.abc.com".
The Tape Coordinator associated with port offset 3 performs the
% backup diskrestore -server fs5.abc.com -partition /vicepd -portoffset 3
The following command restores the volumes for which the VLDB lists a
read/write site on the /vicepb partition of the machine "fs1.abc.com"
to a new site: the /vicepa partition on the machine "fs3.abc.com". The
Tape Coordinator associated with port offset 0 performs the operation.
(The command appears here on two lines only for legibility.)
% backup diskrestore -server fs1.abc.com -partition /vicepb \
-newserver fs3.abc.com -newpartition /vicepa
The following command lists the tapes required to restore the volumes
for which the VLDB lists a read/write site on the /vicepm partition of
the machine "fs4.abc.com":
% backup diskrestore -server fs4.abc.com -partition /vicepm -n
The issuer must be listed in the /etc/openafs/server/UserList file on
every machine where the Backup Server or Volume Location (VL) Server is
running, and on every file server machine that houses an affected
volume. If the -localauth flag is included, the issuer must instead be
logged on to a server machine as the local superuser "root".
butc(5), backup(8), backup_dump(8), backup_volrestore(8),
backup_volsetrestore(8), butc(8), vos_backup(1), vos_examine(1),
IBM Corporation 2000. <http://www.ibm.com/> All Rights Reserved.
This documentation is covered by the IBM Public License Version 1.0.
It was converted from HTML to POD by software written by Chas Williams
and Russ Allbery, based on work by Alf Wachsmann and Elizabeth Cassell.