Provided by: wide-dhcpv6-server_20080615-7_i386 bug

NAME

     dhcp6s - DHCPv6 server

SYNOPSIS

     dhcp6s [-c configfile] [-Ddf] [-k ctlkeyfile] [-p ctlport] [-P pid-file]
            interface

DESCRIPTION

     dhcp6s replies to DHCPv6 client as DHCPv6 server.  dhcp6s can give the
     following information to clients.
     ·   IPv6 prefixes for the requesting site
     ·   Non-temporary IPv6 addresses
     ·   A list of the DNS server addresses
     ·   DNS Domain Search List
     ·   A list of the NTP server addresses
     ·   A list of the SIP server addresses
     ·   SIP Server domain name
     ·   A list of the NIS server addresses
     ·   NIS domain name
     ·   A list of the NIS+ server addresses
     ·   NIS+ domain name
     ·   A list of the BCMCS server addresses
     ·   BCMCS Server domain name

     Command line options are as below:

     -c configfile
             Use configfile as the configuration file.

     -d      Print debugging messages.

     -D      Even more debugging information is printed.

     -f      Foreground mode (useful when debugging).  Although dhcp6s usually
             prints warning, debugging, or error messages to syslog(8), it
             prints the messages to standard error if this option is
             specified.

     -k ctlkeyfile
             Use ctlkeyfile to store the shared secret to authenticate the
             communication with dhcp6ctl.  The default file name used when
             unspecified is /etc/wide-dhcpv6/dhcp6sctlkey.  The default name
             is intentionally same as that for dhcp6ctl so that the server and
             the control command can share the file when dhcp6ctl controls the
             server on the same node, which should be the typical case.

     -p ctlport
             Use ctlport as the port number listening on to communicate with
             dhcp6ctl.

     -P pid-file
             Use pid-file to dump the process ID of dhcp6s.

FILES

     /etc/wide-dhcpv6/dhcp6s.conf  is the default configuration file.
     /var/lib/dhcpv6/dhcp6s_duid   is the default file to store the server’s
                                   DUID.
     /etc/wide-dhcpv6/dhcp6sctlkey
                                   is the default key file to communicate with
                                   the control command.  See dhcp6ctl(8) for
                                   the file format.
     /var/run/dhcp6s.pid           is the default file that contains pid of
                                   the currently running dhcp6s.

SEE ALSO

     dhcp6s.conf(5), dhcp6ctl(8), dhcp6c(8)

     Ralph Droms, Editor, Dynamic Host Configuration Protocol for IPv6
     (DHCPv6), RFC 3315, 2003.

HISTORY

     The dhcp6s command first appeared in WIDE/KAME IPv6 protocol stack kit.

     The -n dnsserv command-line option was obsoleted by introducing a
     configuration file.

BUGS

     dhcp6s is incomplete and violates DHCPv6 protocol spec, in several
     aspects.  To name a few:

     1.   it does not assign temporary IPv6 addresses (nor will).