Provided by: openswan_2.6.23+dfsg-1ubuntu1_i386 bug

NAME

       ipsec showhostkey - show host’s authentication key

SYNOPSIS

       ipsec showhostkey [--ipseckey [gateway]] [--key] [--left] [--right]
             [--dump] [--verbose] [--version] [--list] [--x509self]
             [--x509req] [--x509cert] [--txt gateway] [--dhclient]
             [--file secretfile] [--keynum count] [--id identity]

DESCRIPTION

       Showhostkey outputs (on standard output) a public key suitable for this
       host, in the format specified, using the host key information stored in
       /etc/ipsec.secrets. In general only the super-user can run this
       command, since only he can read ipsec.secrets.

       The --txt option causes the output to be in opportunistic-encryption
       DNS TXT record format, with the specified gateway value. If information
       about how the key was generated is available, that is provided as a
       DNS-file comment. For example, --txt 10.11.12.13 might give (with the
       key data trimmed for clarity):

             ; RSA 2048 bits   xy.example.com   Sat Apr 15 13:53:22 2000
                 IN TXT  "X-IPsec-Server(10)=10.11.12.13 AQOF8tZ2...+buFuFn/"

       No name is supplied in the TXT record because there are too many
       possibilities, depending on how it will be used. If the text string is
       longer than 255 bytes, it is split up into multiple strings (matching
       the restrictions of the DNS TXT binary format). If any split is needed,
       the first split will be at the start of the key: this increases the
       chances that later hand editing will work.

       The --version option causes the version of the binary to be emitted,
       and nothing else.

       The --verbose may be present one or more times. Each occurance
       increases the verbosity level.

       The --left and --right options cause the output to be in ipsec.conf(5)
       format, as a leftrsasigkey or rightrsasigkey parameter respectively.
       Again, generation information is included if available. For example,
       --left might give (with the key data trimmed down for clarity):

             # RSA 2048 bits   xy.example.com   Sat Apr 15 13:53:22 2000
             leftrsasigkey=0sAQOF8tZ2...+buFuFn/

       The --dhclient option cause the output to be suitable for inclusion in
       dhclient.conf(5) as part of configuring WAVEsec. See
       <http://www.wavesec.org>.

       If --ipseckey is specified, the output format is the text form of a DNS
       IPSECKEY record (see RFC4025); the host name is the one included in the
       key information (or, if that is not available, the output of
       hostname --fqdn), with a .  appended. The gateway information, if
       provided, is is included, otherwise, the gateway is assumed to be self,
       and to be of type FQDN. Generation information is included if
       available. For example (with the key data trimmed down for clarity):

             ; RSA 2048 bits   xy.example.com   Sat Apr 15 13:53:22 2000
             xy.example.com.   IN   IPSECKEYKEY   floyd albert

       If --key is specified, the output format is the text form of a DNS KEY
       record; the host name is the one included in the key information (or,
       if that is not available, the output of hostname --fqdn), with a .
       appended. The IPSEC usage of the DNS KEY is deprecated (see RFC3445),
       use IPSECKEY. Again, generation information is included if available.
       For example (with the key data trimmed down for clarity):

             ; RSA 2048 bits   xy.example.com   Sat Apr 15 13:53:22 2000
             xy.example.com.   IN   KEY   0x4200 4 1 AQOF8tZ2...+buFuFn/

       Normally, the default key for this host (the one with no host
       identities specified for it) is the one extracted. The --id option
       overrides this, causing extraction of the key labeled with the
       specified identity, if any. The specified identity must exactly match
       the identity in the file; in particular, the comparison is
       case-sensitive.

       There may also be multiple keys with the same identity. All keys are
       numbered based upon their linear sequence in the file (including all
       include directives)

       The --file option overrides the default for where the key information
       should be found, and takes it from the specified secretfile.

DIAGNOSTICS

       A complaint about “no pubkey line found” indicates that the host has a
       key but it was generated with an old version of FreeS/WAN and does not
       contain the information that showhostkey needs.

FILES

       /etc/ipsec.secrets

SEE ALSO

       ipsec.secrets(5), ipsec.conf(5), ipsec_rsasigkey(8)

HISTORY

       Written for the Linux FreeS/WAN project <http://www.freeswan.org> by
       Henry Spencer.

BUGS

       Arguably, rather than just reporting the no-IN-KEY-line-found problem,
       showhostkey should be smart enough to run the existing key through
       rsasigkey with the --oldkey option, to generate a suitable output line.

       The need to specify the gateway address (etc.) for --txt is annoying,
       but there is no good way to determine it automatically.

       There should be a way to specify the priority value for TXT records;
       currently it is hardwired to 10.

       The --id option assumes that the identity appears on the same line as
       the : RSA { that begins the key proper.