Provided by: wpasupplicant_0.6.9-3ubuntu3_i386 bug

NAME

       wpa_cli - WPA command line client

SYNOPSIS

       wpa_cli  [ -p path to ctrl sockets ] [ -i ifname ] [ -hvB ] [ -a action
       file ] [ -P pid file ] [ command ... ]

OVERVIEW

       wpa_cli  is  a  text-based  frontend  program  for   interacting   with
       wpa_supplicant.   It   is   used   to   query  current  status,  change
       configuration, trigger events, and request interactive user input.

       wpa_cli can show the current authentication status,  selected  security
       mode,  dot11  and  dot1x  MIBs, etc. In addition, it can configure some
       variables like EAPOL state machine parameters and trigger  events  like
       reassociation  and  IEEE  802.1X  logoff/logon. wpa_cli provides a user
       interface to request  authentication  information,  like  username  and
       password,  if  these are not included in the configuration. This can be
       used to implement,  e.g.,  one-time-passwords  or  generic  token  card
       authentication  where  the  authentication  is  based  on  a challenge-
       response that uses an external device for generating the response.

       The control interface of wpa_supplicant can be configured to allow non-
       root  user access (ctrl_interface GROUP= parameter in the configuration
       file). This makes it  possible  to  run  wpa_cli  with  a  normal  user
       account.

       wpa_cli  supports  two  modes: interactive and command line. Both modes
       share the same command set and the main difference  is  in  interactive
       mode   providing   access  to  unsolicited  messages  (event  messages,
       username/password requests).

       Interactive mode is started when wpa_cli is executed without  including
       the  command  as a command line parameter. Commands are then entered on
       the wpa_cli prompt. In command line mode, the same commands are entered
       as command line arguments for wpa_cli.

INTERACTIVE AUTHENTICATION PARAMETERS REQUEST

       When  wpa_supplicant  need authentication parameters, like username and
       password, which are not present in the configuration file, it  sends  a
       request  message  to  all  attached frontend programs, e.g., wpa_cli in
       interactive  mode.   wpa_cli   shows   these   requests   with   "CTRL-
       REQ-<type>-<id>:<text>"  prefix.  <type>  is IDENTITY, PASSWORD, or OTP
       (one-time-password). <id>  is  a  unique  identifier  for  the  current
       network.  <text> is description of the request. In case of OTP request,
       it includes the challenge from the authentication server.

       The reply to these requests can be given with identity,  password,  and
       otp  commands.  <id>  needs  to  be  copied  from the matching request.
       password and otp commands can be used regardless of whether the request
       was for PASSWORD or OTP. The main difference between these two commands
       is  that  values  given  with  password  are  remembered  as  long   as
       wpa_supplicant  is  running whereas values given with otp are used only
       once and then forgotten, i.e., wpa_supplicant will ask frontend  for  a
       new  value  for  every  use.   This  can be used to implement one-time-
       password lists and generic token card -based authentication.

       Example request for password and a matching reply:

              CTRL-REQ-PASSWORD-1:Password needed for SSID foobar
              > password 1 mysecretpassword

       Example request for generic token card challenge-response:

              CTRL-REQ-OTP-2:Challenge 1235663 needed for SSID foobar
              > otp 2 9876

COMMAND ARGUMENTS

       -p path
              Change the path where control sockets should be found.

       -i ifname
              Specify the interface that is  being  configured.   By  default,
              choose  the  first  interface found with a control socket in the
              socket path.

       -h     Help.  Show a usage message.

       -v     Show version information.

       -B     Run as a daemon in the background.

       -a file
              Run in daemon mode executing the action  file  based  on  events
              from  wpa_supplicant.   The specified file will be executed with
              the  first  argument  set  to  interface  name  and  second   to
              "CONNECTED"  or "DISCONNECTED" depending on the event.  This can
              be used to execute networking tools required  to  configure  the
              interface.

              Additionally, three environmental variables are available to the
              file:  WPA_CTRL_DIR,  WPA_ID,   and   WPA_ID_STR.   WPA_CTRL_DIR
              contains  the absolute path to the ctrl_interface socket. WPA_ID
              contains the unique network_id identifier assigned to the active
              network,  and  WPA_ID_STR  contains  the  content  of the id_str
              option.

       -P file
              Set the location of the PID file.

       command
              Run a command.  The available commands are listed  in  the  next
              section.

COMMANDS

       The following commands are available:

       status get current WPA/EAPOL/EAP status

       mib    get MIB variables (dot1x, dot11)

       help   show this usage help

       interface [ifname]
              show interfaces/select interface

       level <debug level>
              change debug level

       license
              show full wpa_cli license

       logoff IEEE 802.1X EAPOL state machine logoff

       logon  IEEE 802.1X EAPOL state machine logon

       set    set   variables  (shows  list  of  variables  when  run  without
              arguments)

       pmksa  show PMKSA cache

       reassociate
              force reassociation

       reconfigure
              force wpa_supplicant to re-read its configuration file

       preauthenticate <BSSID>
              force preauthentication

       identity <network id> <identity>
              configure identity for an SSID

       password <network id> <password>
              configure password for an SSID

       pin <network id> <pin>
              configure pin for an SSID

       otp <network id> <password>
              configure one-time-password for an SSID

       bssid <network id> <BSSID>
              set preferred BSSID for an SSID

       list_networks
              list configured networks

       terminate
              terminate wpa_supplicant

       quit   exit wpa_cli

SEE ALSO

       wpa_supplicant(8)

LEGAL

       wpa_supplicant is copyright (c) 2003-2007, Jouni Malinen <j@w1.fi>  and
       contributors.  All Rights Reserved.

       This  program  is  dual-licensed  under  both the GPL version 2 and BSD
       license. Either license may be used at your option.

                                 07 March 2010                      WPA_CLI(8)