Provided by: libpcre2-dev_10.42-4_amd64 bug

NAME

       PCRE2 - Perl-compatible regular expressions (revised API)

PCRE2 REGULAR EXPRESSION DETAILS


       The  syntax  and  semantics  of  the  regular  expressions that are supported by PCRE2 are
       described in detail below. There is a quick-reference syntax summary  in  the  pcre2syntax
       page.  PCRE2  tries  to  match Perl syntax and semantics as closely as it can.  PCRE2 also
       supports some alternative regular expression syntax (which does not conflict with the Perl
       syntax)  in  order to provide some compatibility with regular expressions in Python, .NET,
       and Oniguruma.

       Perl's regular expressions are described in its own documentation, and regular expressions
       in  general are covered in a number of books, some of which have copious examples. Jeffrey
       Friedl's  "Mastering  Regular  Expressions",  published  by   O'Reilly,   covers   regular
       expressions  in  great detail. This description of PCRE2's regular expressions is intended
       as reference material.

       This document discusses the regular expression patterns that are supported by  PCRE2  when
       its main matching function, pcre2_match(), is used. PCRE2 also has an alternative matching
       function, pcre2_dfa_match(), which matches using a different algorithm that is  not  Perl-
       compatible.  Some  of  the features discussed below are not available when DFA matching is
       used. The advantages and disadvantages of the alternative function,  and  how  it  differs
       from the normal function, are discussed in the pcre2matching page.

SPECIAL START-OF-PATTERN ITEMS


       A number of options that can be passed to pcre2_compile() can also be set by special items
       at the start of a pattern. These are not Perl-compatible, but are provided to  make  these
       options  accessible  to  pattern  writers  who  are  not  able  to change the program that
       processes the pattern. Any number of these items may appear, but they must all be together
       right at the start of the pattern string, and the letters must be in upper case.

   UTF support

       In  the  8-bit  and  16-bit PCRE2 libraries, characters may be coded either as single code
       units, or as multiple UTF-8 or UTF-16 code units. UTF-32 can be specified for  the  32-bit
       library, in which case it constrains the character values to valid Unicode code points. To
       process UTF strings, PCRE2 must  be  built  to  include  Unicode  support  (which  is  the
       default).  When  using UTF strings you must either call the compiling function with one or
       both of the PCRE2_UTF or PCRE2_MATCH_INVALID_UTF options, or the pattern must  start  with
       the  special  sequence  (*UTF), which is equivalent to setting the relevant PCRE2_UTF. How
       setting a UTF mode affects pattern matching is mentioned in several places below. There is
       also a summary of features in the pcre2unicode page.

       Some  applications  that allow their users to supply patterns may wish to restrict them to
       non-UTF  data  for  security  reasons.  If  the  PCRE2_NEVER_UTF  option  is   passed   to
       pcre2_compile(), (*UTF) is not allowed, and its appearance in a pattern causes an error.

   Unicode property support

       Another  special  sequence  that may appear at the start of a pattern is (*UCP).  This has
       the same effect as setting the PCRE2_UCP option: it causes sequences such as \d and \w  to
       use  Unicode  properties  to  determine  character  types,  instead  of  recognizing  only
       characters with codes less than 256 via a lookup table. If also causes upper/lower  casing
       operations  to  use  Unicode  properties for characters with code points greater than 127,
       even when UTF is not set.

       Some applications that allow their users to supply patterns may wish to restrict them  for
       security  reasons.  If  the PCRE2_NEVER_UCP option is passed to pcre2_compile(), (*UCP) is
       not allowed, and its appearance in a pattern causes an error.

   Locking out empty string matching

       Starting a pattern with (*NOTEMPTY) or (*NOTEMPTY_ATSTART) has the same effect as  passing
       the  PCRE2_NOTEMPTY  or  PCRE2_NOTEMPTY_ATSTART  option  to whichever matching function is
       subsequently called to match the pattern. These options lock out  the  matching  of  empty
       strings, either entirely, or only at the start of the subject.

   Disabling auto-possessification

       If  a  pattern  starts  with  (*NO_AUTO_POSSESS),  it  has  the same effect as setting the
       PCRE2_NO_AUTO_POSSESS option. This stops PCRE2 from  making  quantifiers  possessive  when
       what  follows  cannot  match  the repeated item. For example, by default a+b is treated as
       a++b. For more details, see the pcre2api documentation.

   Disabling start-up optimizations

       If a pattern  starts  with  (*NO_START_OPT),  it  has  the  same  effect  as  setting  the
       PCRE2_NO_START_OPTIMIZE  option.  This disables several optimizations for quickly reaching
       "no match" results. For more details, see the pcre2api documentation.

   Disabling automatic anchoring

       If a pattern starts with (*NO_DOTSTAR_ANCHOR), it has  the  same  effect  as  setting  the
       PCRE2_NO_DOTSTAR_ANCHOR  option.  This disables optimizations that apply to patterns whose
       top-level branches all start with .* (match any number of arbitrary characters). For  more
       details, see the pcre2api documentation.

   Disabling JIT compilation

       If  a  pattern  that  starts  with  (*NO_JIT)  is successfully compiled, an attempt by the
       application to apply the JIT optimization by calling pcre2_jit_compile() is ignored.

   Setting match resource limits

       The pcre2_match() function contains a counter that is incremented every time it goes round
       its  main  loop.  The  caller  of  pcre2_match()  can  set  a limit on this counter, which
       therefore limits the amount of computing resource used for a match. The maximum  depth  of
       nested  backtracking  can  also  be  limited; this indirectly restricts the amount of heap
       memory that is used, but there is also an explicit memory limit that can be set.

       These facilities are provided to catch runaway matches that are provoked by patterns  with
       huge  matching  trees. A common example is a pattern with nested unlimited repeats applied
       to a long string that does not match. When one of these limits is  reached,  pcre2_match()
       gives  an error return. The limits can also be set by items at the start of the pattern of
       the form

         (*LIMIT_HEAP=d)
         (*LIMIT_MATCH=d)
         (*LIMIT_DEPTH=d)

       where d is any number of decimal digits. However, the value of the setting  must  be  less
       than  the  value  set  (or  defaulted)  by  the caller of pcre2_match() for it to have any
       effect. In other words, the pattern writer can lower the limits set by the programmer, but
       not  raise them. If there is more than one setting of one of these limits, the lower value
       is used. The heap limit is specified in kibibytes (units of 1024 bytes).

       Prior to release 10.30,  LIMIT_DEPTH  was  called  LIMIT_RECURSION.  This  name  is  still
       recognized for backwards compatibility.

       The  heap  limit applies only when the pcre2_match() or pcre2_dfa_match() interpreters are
       used for matching. It does not apply to JIT. The match limit is used (but in  a  different
       way)  when  JIT  is  being  used,  or when pcre2_dfa_match() is called, to limit computing
       resource usage by those matching functions. The depth limit  is  ignored  by  JIT  but  is
       relevant for DFA matching, which uses function recursion for recursions within the pattern
       and for lookaround assertions and atomic groups. In this case, the  depth  limit  controls
       the depth of such recursion.

   Newline conventions

       PCRE2  supports  six different conventions for indicating line breaks in strings: a single
       CR (carriage return) character,  a  single  LF  (linefeed)  character,  the  two-character
       sequence  CRLF,  any  of  the  three  preceding,  any Unicode newline sequence, or the NUL
       character (binary zero). The pcre2api page has  further  discussion  about  newlines,  and
       shows how to set the newline convention when calling pcre2_compile().

       It  is also possible to specify a newline convention by starting a pattern string with one
       of the following sequences:

         (*CR)        carriage return
         (*LF)        linefeed
         (*CRLF)      carriage return, followed by linefeed
         (*ANYCRLF)   any of the three above
         (*ANY)       all Unicode newline sequences
         (*NUL)       the NUL character (binary zero)

       These override the default and the options given to the compiling function.  For  example,
       on a Unix system where LF is the default newline sequence, the pattern

         (*CR)a.b

       changes  the  convention  to  CR.  That  pattern  matches "a\nb" because LF is no longer a
       newline. If more than one of these settings is present, the last one is used.

       The newline convention affects where the circumflex and dollar  assertions  are  true.  It
       also affects the interpretation of the dot metacharacter when PCRE2_DOTALL is not set, and
       the behaviour of \N when not followed by an opening brace. However,  it  does  not  affect
       what the \R escape sequence matches. By default, this is any Unicode newline sequence, for
       Perl compatibility. However, this can be changed; see the next section and the description
       of  \R  in  the  section entitled "Newline sequences" below. A change of \R setting can be
       combined with a change of newline convention.

   Specifying what \R matches

       It is possible to restrict \R to match only CR, LF, or CRLF (instead of the  complete  set
       of  Unicode  line  endings)  by setting the option PCRE2_BSR_ANYCRLF at compile time. This
       effect can also be achieved by starting a pattern with (*BSR_ANYCRLF).  For  completeness,
       (*BSR_UNICODE) is also recognized, corresponding to PCRE2_BSR_UNICODE.

EBCDIC CHARACTER CODES


       PCRE2  can  be  compiled  to  run in an environment that uses EBCDIC as its character code
       instead of ASCII or Unicode  (typically  a  mainframe  system).  In  the  sections  below,
       character  code values are ASCII or Unicode; in an EBCDIC environment these characters may
       have different code values, and there are no code points greater than 255.

CHARACTERS AND METACHARACTERS


       A regular expression is a pattern that is matched against a subject string  from  left  to
       right.  Most  characters  stand  for  themselves in a pattern, and match the corresponding
       characters in the subject. As a trivial example, the pattern

         The quick brown fox

       matches a portion of a subject string that is identical to itself. When caseless  matching
       is  specified  (the PCRE2_CASELESS option or (?i) within the pattern), letters are matched
       independently of case. Note that there are  two  ASCII  characters,  K  and  S,  that,  in
       addition  to  their  lower case ASCII equivalents, are case-equivalent with Unicode U+212A
       (Kelvin sign) and U+017F (long S) respectively when either PCRE2_UTF or PCRE2_UCP is set.

       The power of regular expressions comes from the ability to include wild  cards,  character
       classes, alternatives, and repetitions in the pattern. These are encoded in the pattern by
       the use of metacharacters, which do not stand for themselves but instead  are  interpreted
       in some special way.

       There  are two different sets of metacharacters: those that are recognized anywhere in the
       pattern except within square  brackets,  and  those  that  are  recognized  within  square
       brackets. Outside square brackets, the metacharacters are as follows:

         \      general escape character with several uses
         ^      assert start of string (or line, in multiline mode)
         $      assert end of string (or line, in multiline mode)
         .      match any character except newline (by default)
         [      start character class definition
         |      start of alternative branch
         (      start group or control verb
         )      end group or control verb
         *      0 or more quantifier
         +      1 or more quantifier; also "possessive quantifier"
         ?      0 or 1 quantifier; also quantifier minimizer
         {      start min/max quantifier

       Part of a pattern that is in square brackets is called a "character class". In a character
       class the only metacharacters are:

         \      general escape character
         ^      negate the class, but only if the first character
         -      indicates character range
         [      POSIX character class (if followed by POSIX syntax)
         ]      terminates the character class

       If a pattern is compiled with the PCRE2_EXTENDED option, most white space in the  pattern,
       other  than in a character class, and characters between a # outside a character class and
       the next newline, inclusive, are ignored. An escaping backslash can be used to  include  a
       white  space or a # character as part of the pattern. If the PCRE2_EXTENDED_MORE option is
       set, the same applies, but in addition unescaped space and horizontal tab  characters  are
       ignored  inside  a  character  class. Note: only these two characters are ignored, not the
       full set of pattern white space characters that are ignored  outside  a  character  class.
       Option settings can be changed within a pattern; see the section entitled "Internal Option
       Setting" below.

       The following sections describe the use of each of the metacharacters.

BACKSLASH


       The backslash character has several uses. Firstly, if it is followed by a  character  that
       is  not  a  digit  or a letter, it takes away any special meaning that character may have.
       This use of backslash as an escape character applies both  inside  and  outside  character
       classes.

       For  example,  if  you want to match a * character, you must write \* in the pattern. This
       escaping action applies  whether  or  not  the  following  character  would  otherwise  be
       interpreted  as  a  metacharacter, so it is always safe to precede a non-alphanumeric with
       backslash to specify that it stands for itself.  In particular, if you  want  to  match  a
       backslash, you write \\.

       Only  ASCII  digits  and  letters  have  any  special meaning after a backslash. All other
       characters (in particular, those whose code points are greater than 127)  are  treated  as
       literals.

       If  you  want  to treat all characters in a sequence as literals, you can do so by putting
       them between \Q and \E. This is different from Perl  in  that  $  and  @  are  handled  as
       literals  in  \Q...\E  sequences  in  PCRE2,  whereas  in  Perl,  $  and  @ cause variable
       interpolation. Also, Perl does "double-quotish backslash interpolation" on any backslashes
       between  \Q  and  \E which, its documentation says, "may lead to confusing results". PCRE2
       treats a backslash between \Q and \E just like any other  character.  Note  the  following
       examples:

         Pattern            PCRE2 matches   Perl matches

         \Qabc$xyz\E        abc$xyz        abc followed by the
                                             contents of $xyz
         \Qabc\$xyz\E       abc\$xyz       abc\$xyz
         \Qabc\E\$\Qxyz\E   abc$xyz        abc$xyz
         \QA\B\E            A\B            A\B
         \Q\\E              \              \\E

       The \Q...\E sequence is recognized both inside and outside character classes.  An isolated
       \E that is not preceded by \Q is ignored. If \Q  is  not  followed  by  \E  later  in  the
       pattern,  the  literal  interpretation continues to the end of the pattern (that is, \E is
       assumed at the end). If the isolated \Q is inside a character class, this causes an error,
       because the character class is not terminated by a closing square bracket.

   Non-printing characters

       A  second  use of backslash provides a way of encoding non-printing characters in patterns
       in a visible manner. There is no restriction on the appearance of non-printing  characters
       in  a pattern, but when a pattern is being prepared by text editing, it is often easier to
       use one of the following escape sequences instead of the binary character  it  represents.
       In an ASCII or Unicode environment, these escapes are as follows:

         \a          alarm, that is, the BEL character (hex 07)
         \cx         "control-x", where x is any printable ASCII character
         \e          escape (hex 1B)
         \f          form feed (hex 0C)
         \n          linefeed (hex 0A)
         \r          carriage return (hex 0D) (but see below)
         \t          tab (hex 09)
         \0dd        character with octal code 0dd
         \ddd        character with octal code ddd, or backreference
         \o{ddd..}   character with octal code ddd..
         \xhh        character with hex code hh
         \x{hhh..}   character with hex code hhh..
         \N{U+hhh..} character with Unicode hex code point hhh..

       By  default,  after  \x that is not followed by {, from zero to two hexadecimal digits are
       read (letters can be in upper or lower case). Any number of hexadecimal digits may  appear
       between  \x{  and }. If a character other than a hexadecimal digit appears between \x{ and
       }, or if there is no terminating }, an error occurs.

       Characters whose code points are less than 256  can  be  defined  by  either  of  the  two
       syntaxes  for  \x  or  by  an  octal  sequence. There is no difference in the way they are
       handled. For example, \xdc is exactly the same as \x{dc}  or  \334.   However,  using  the
       braced versions does make such sequences easier to read.

       Support  is  available  for  some  ECMAScript  (aka  JavaScript)  escape sequences via two
       compile-time options. If PCRE2_ALT_BSUX is set, the sequence  \x  followed  by  {  is  not
       recognized.  Only  if  \x  is  followed  by  two  hexadecimal digits is it recognized as a
       character escape. Otherwise it is interpreted as a literal "x" character.  In  this  mode,
       support for code points greater than 256 is provided by \u, which must be followed by four
       hexadecimal digits; otherwise it is interpreted as a literal "u" character.

       PCRE2_EXTRA_ALT_BSUX has the same effect as PCRE2_ALT_BSUX and, in addition, \u{hhh..}  is
       recognized  as the character specified by hexadecimal code point.  There may be any number
       of hexadecimal digits. This syntax is from ECMAScript 6.

       The \N{U+hhh..} escape sequence is recognized only when PCRE2 is operating  in  UTF  mode.
       Perl  also  uses  \N{name}  to  specify characters by Unicode name; PCRE2 does not support
       this. Note that when \N is not followed by an opening brace  (curly  bracket)  it  has  an
       entirely different meaning, matching any character that is not a newline.

       There  are  some  legacy  applications where the escape sequence \r is expected to match a
       newline. If the PCRE2_EXTRA_ESCAPED_CR_IS_LF option is set, \r in a pattern  is  converted
       to \n so that it matches a LF (linefeed) instead of a CR (carriage return) character.

       The  precise effect of \cx on ASCII characters is as follows: if x is a lower case letter,
       it is converted to upper case. Then bit 6 of the character (hex 40) is inverted. Thus  \cA
       to  \cZ  become hex 01 to hex 1A (A is 41, Z is 5A), but \c{ becomes hex 3B ({ is 7B), and
       \c; becomes hex 7B (; is 3B). If the code unit following \c has a value less  than  32  or
       greater than 126, a compile-time error occurs.

       When  PCRE2  is compiled in EBCDIC mode, \N{U+hhh..} is not supported. \a, \e, \f, \n, \r,
       and \t generate the appropriate  EBCDIC  code  values.  The  \c  escape  is  processed  as
       specified  for Perl in the perlebcdic document. The only characters that are allowed after
       \c are A-Z, a-z, or one of @, [, \, ], ^, _, or ?. Any other character provokes a compile-
       time  error.  The  sequence  \c@ encodes character code 0; after \c the letters (in either
       case) encode characters 1-26 (hex 01 to hex 1A); [, \, ], ^, and _ encode characters 27-31
       (hex 1B to hex 1F), and \c? becomes either 255 (hex FF) or 95 (hex 5F).

       Thus,  apart from \c?, these escapes generate the same character code values as they do in
       an ASCII environment, though the meanings of the values mostly differ.  For  example,  \cG
       always generates code value 7, which is BEL in ASCII but DEL in EBCDIC.

       The  sequence  \c? generates DEL (127, hex 7F) in an ASCII environment, but because 127 is
       not  a  control  character  in  EBCDIC,  Perl  makes  it  generate  the   APC   character.
       Unfortunately, there are several variants of EBCDIC. In most of them the APC character has
       the value 255 (hex FF), but in the one Perl calls POSIX-BC its value is 95  (hex  5F).  If
       certain  other  characters have POSIX-BC values, PCRE2 makes \c? generate 95; otherwise it
       generates 255.

       After \0 up to two further octal digits are read. If there are fewer than two digits, just
       those  that  are  present  are used. Thus the sequence \0\x\015 specifies two binary zeros
       followed by a CR character (code value 13). Make sure you  supply  two  digits  after  the
       initial zero if the pattern character that follows is itself an octal digit.

       The escape \o must be followed by a sequence of octal digits, enclosed in braces. An error
       occurs if this is not the case. This escape is a recent addition to Perl; it provides  way
       of specifying character code points as octal numbers greater than 0777, and it also allows
       octal numbers and backreferences to be unambiguously specified.

       For greater clarity and unambiguity, it is best to avoid following \ by  a  digit  greater
       than  zero. Instead, use \o{} or \x{} to specify numerical character code points, and \g{}
       to specify backreferences. The following paragraphs describe the old, ambiguous syntax.

       The handling of a backslash followed by a digit other than 0 is complicated, and Perl  has
       changed over time, causing PCRE2 also to change.

       Outside  a  character  class,  PCRE2 reads the digit and any following digits as a decimal
       number. If the number is less than 10, begins with the digit 8 or 9, or if  there  are  at
       least that many previous capture groups in the expression, the entire sequence is taken as
       a backreference. A description of how this works is given later, following the  discussion
       of parenthesized groups.  Otherwise, up to three octal digits are read to form a character
       code.

       Inside a character class, PCRE2 handles \8 and \9 as the literal characters "8"  and  "9",
       and  otherwise  reads  up  to  three  octal  digits following the backslash, using them to
       generate a data character. Any  subsequent  digits  stand  for  themselves.  For  example,
       outside a character class:

         \040   is another way of writing an ASCII space
         \40    is the same, provided there are fewer than 40
                   previous capture groups
         \7     is always a backreference
         \11    might be a backreference, or another way of
                   writing a tab
         \011   is always a tab
         \0113  is a tab followed by the character "3"
         \113   might be a backreference, otherwise the
                   character with octal code 113
         \377   might be a backreference, otherwise
                   the value 255 (decimal)
         \81    is always a backreference

       Note  that octal values of 100 or greater that are specified using this syntax must not be
       introduced by a leading zero, because no more than three octal digits are ever read.

   Constraints on character values

       Characters that are specified using octal or hexadecimal numbers are  limited  to  certain
       values, as follows:

         8-bit non-UTF mode    no greater than 0xff
         16-bit non-UTF mode   no greater than 0xffff
         32-bit non-UTF mode   no greater than 0xffffffff
         All UTF modes         no greater than 0x10ffff and a valid code point

       Invalid  Unicode  code  points  are all those in the range 0xd800 to 0xdfff (the so-called
       "surrogate" code  points).  The  check  for  these  can  be  disabled  by  the  caller  of
       pcre2_compile()  by  setting the option PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES. However, this
       is possible only in UTF-8 and UTF-32 modes, because these values are not representable  in
       UTF-16.

   Escape sequences in character classes

       All the sequences that define a single character value can be used both inside and outside
       character classes. In addition, inside  a  character  class,  \b  is  interpreted  as  the
       backspace character (hex 08).

       When  not  followed  by an opening brace, \N is not allowed in a character class.  \B, \R,
       and \X are not special inside a character class. Like other unrecognized alphabetic escape
       sequences,  they cause an error. Outside a character class, these sequences have different
       meanings.

   Unsupported escape sequences

       In Perl, the sequences \F, \l, \L, \u, and \U are recognized by  its  string  handler  and
       used  to modify the case of following characters. By default, PCRE2 does not support these
       escape  sequences  in  patterns.   However,   if   either   of   the   PCRE2_ALT_BSUX   or
       PCRE2_EXTRA_ALT_BSUX  options  is  set,  \U matches a "U" character, and \u can be used to
       define a character by code point, as described above.

   Absolute and relative backreferences

       The sequence \g followed by a signed or unsigned number, optionally enclosed in braces, is
       an  absolute  or  relative  backreference. A named backreference can be coded as \g{name}.
       Backreferences are discussed later, following the discussion of parenthesized groups.

   Absolute and relative subroutine calls

       For compatibility with Oniguruma, the non-Perl syntax \g followed by a name  or  a  number
       enclosed  either  in  angle  brackets  or  single  quotes,  is  an  alternative syntax for
       referencing a capture group as a subroutine.  Details  are  discussed  later.   Note  that
       \g{...}  (Perl  syntax) and \g<...> (Oniguruma syntax) are not synonymous. The former is a
       backreference; the latter is a subroutine call.

   Generic character types

       Another use of backslash is for specifying generic character types:

         \d     any decimal digit
         \D     any character that is not a decimal digit
         \h     any horizontal white space character
         \H     any character that is not a horizontal white space character
         \N     any character that is not a newline
         \s     any white space character
         \S     any character that is not a white space character
         \v     any vertical white space character
         \V     any character that is not a vertical white space character
         \w     any "word" character
         \W     any "non-word" character

       The \N escape sequence has the same meaning as the "." metacharacter when PCRE2_DOTALL  is
       not  set, but setting PCRE2_DOTALL does not change the meaning of \N. Note that when \N is
       followed by an opening brace it has a different meaning. See the  section  entitled  "Non-
       printing  characters"  above for details. Perl also uses \N{name} to specify characters by
       Unicode name; PCRE2 does not support this.

       Each pair of lower and  upper  case  escape  sequences  partitions  the  complete  set  of
       characters  into two disjoint sets. Any given character matches one, and only one, of each
       pair. The sequences can appear both inside and outside character classes. They each  match
       one  character of the appropriate type. If the current matching point is at the end of the
       subject string, all of them fail, because there is no character to match.

       The default \s characters are HT (9), LF (10), VT (11), FF (12), CR (13), and space  (32),
       which  are defined as white space in the "C" locale. This list may vary if locale-specific
       matching is taking place. For example, in some locales the "non-breaking space"  character
       (\xA0) is recognized as white space, and in others the VT character is not.

       A  "word"  character  is  an  underscore  or  any character that is a letter or digit.  By
       default, the definition  of  letters  and  digits  is  controlled  by  PCRE2's  low-valued
       character  tables,  and  may vary if locale-specific matching is taking place (see "Locale
       support" in the pcre2api page). For example, in a French locale such as "fr_FR"  in  Unix-
       like  systems,  or "french" in Windows, some character codes greater than 127 are used for
       accented letters, and these are then matched by \w. The use of  locales  with  Unicode  is
       discouraged.

       By  default,  characters whose code points are greater than 127 never match \d, \s, or \w,
       and always match \D, \S, and \W, although this may be  different  for  characters  in  the
       range  128-255  when locale-specific matching is happening.  These escape sequences retain
       their original meanings from before Unicode support was available, mainly  for  efficiency
       reasons.  If  the  PCRE2_UCP  option  is  set,  the  behaviour  is changed so that Unicode
       properties are used to determine character types, as follows:

         \d  any character that matches \p{Nd} (decimal digit)
         \s  any character that matches \p{Z} or \h or \v
         \w  any character that matches \p{L} or \p{N}, plus underscore

       The upper case escapes match the inverse sets of characters. Note  that  \d  matches  only
       decimal  digits,  whereas \w matches any Unicode digit, as well as any Unicode letter, and
       underscore. Note also that PCRE2_UCP affects \b, and \B because they are defined in  terms
       of \w and \W. Matching these sequences is noticeably slower when PCRE2_UCP is set.

       The  sequences  \h,  \H,  \v, and \V, in contrast to the other sequences, which match only
       ASCII characters by default, always match a specific list of code points, whether  or  not
       PCRE2_UCP is set. The horizontal space characters are:

         U+0009     Horizontal tab (HT)
         U+0020     Space
         U+00A0     Non-break space
         U+1680     Ogham space mark
         U+180E     Mongolian vowel separator
         U+2000     En quad
         U+2001     Em quad
         U+2002     En space
         U+2003     Em space
         U+2004     Three-per-em space
         U+2005     Four-per-em space
         U+2006     Six-per-em space
         U+2007     Figure space
         U+2008     Punctuation space
         U+2009     Thin space
         U+200A     Hair space
         U+202F     Narrow no-break space
         U+205F     Medium mathematical space
         U+3000     Ideographic space

       The vertical space characters are:

         U+000A     Linefeed (LF)
         U+000B     Vertical tab (VT)
         U+000C     Form feed (FF)
         U+000D     Carriage return (CR)
         U+0085     Next line (NEL)
         U+2028     Line separator
         U+2029     Paragraph separator

       In 8-bit, non-UTF-8 mode, only the characters with code points less than 256 are relevant.

   Newline sequences

       Outside  a character class, by default, the escape sequence \R matches any Unicode newline
       sequence. In 8-bit non-UTF-8 mode \R is equivalent to the following:

         (?>\r\n|\n|\x0b|\f|\r|\x85)

       This is an example of  an  "atomic  group",  details  of  which  are  given  below.   This
       particular  group  matches  either the two-character sequence CR followed by LF, or one of
       the single characters LF (linefeed, U+000A), VT (vertical tab,  U+000B),  FF  (form  feed,
       U+000C),  CR  (carriage  return,  U+000D),  or NEL (next line, U+0085). Because this is an
       atomic group, the two-character sequence is treated as a single unit that cannot be split.

       In other modes, two additional characters whose code  points  are  greater  than  255  are
       added:  LS (line separator, U+2028) and PS (paragraph separator, U+2029).  Unicode support
       is not needed for these characters to be recognized.

       It is possible to restrict \R to match only CR, LF, or CRLF (instead of the  complete  set
       of  Unicode line endings) by setting the option PCRE2_BSR_ANYCRLF at compile time. (BSR is
       an abbreviation for "backslash R".) This can be made the default when PCRE2 is  built;  if
       this  is  the case, the other behaviour can be requested via the PCRE2_BSR_UNICODE option.
       It is also possible to specify these settings by starting a pattern string with one of the
       following sequences:

         (*BSR_ANYCRLF)   CR, LF, or CRLF only
         (*BSR_UNICODE)   any Unicode newline sequence

       These  override  the  default  and the options given to the compiling function.  Note that
       these special settings, which are not Perl-compatible, are recognized  only  at  the  very
       start  of  a  pattern,  and  that  they must be in upper case. If more than one of them is
       present, the last one is used. They can be combined with a change of  newline  convention;
       for example, a pattern can start with:

         (*ANY)(*BSR_ANYCRLF)

       They  can also be combined with the (*UTF) or (*UCP) special sequences. Inside a character
       class, \R is treated as an unrecognized escape sequence, and causes an error.

   Unicode character properties

       When PCRE2 is built with Unicode support (the default), three additional escape  sequences
       that  match  characters  with  specific  properties are available. They can be used in any
       mode, though in 8-bit and 16-bit non-UTF modes these sequences are of  course  limited  to
       testing  characters  whose  code points are less than U+0100 and U+10000, respectively. In
       32-bit non-UTF mode, code  points  greater  than  0x10ffff  (the  Unicode  limit)  may  be
       encountered.  These  are all treated as being in the Unknown script and with an unassigned
       type.

       Matching characters by Unicode property is not fast, because PCRE2 has to do a  multistage
       table  lookup  in order to find a character's property. That is why the traditional escape
       sequences such as \d and \w do not use Unicode properties in PCRE2 by default, though  you
       can  make  them  do  so  by  setting  the PCRE2_UCP option or by starting the pattern with
       (*UCP).

       The extra escape sequences that provide property support are:

         \p{xx}   a character with the xx property
         \P{xx}   a character without the xx property
         \X       a Unicode extended grapheme cluster

       The property names represented by xx above are not case-sensitive, and in accordance  with
       Unicode's  "loose  matching" rules, spaces, hyphens, and underscores are ignored. There is
       support for Unicode script  names,  Unicode  general  category  properties,  "Any",  which
       matches  any  character  (including  newline),  Bidi_Class,  a  number  of binary (yes/no)
       properties, and some special PCRE2  properties  (described  below).   Certain  other  Perl
       properties  such  as "InMusicalSymbols" are not supported by PCRE2. Note that \P{Any} does
       not match any characters, so always causes a match failure.

   Script properties for \p and \P

       There are three different syntax forms for matching a script. Each Unicode character has a
       basic  script and, optionally, a list of other scripts ("Script Extensions") with which it
       is commonly used. Using the Adlam script as an example,  \p{sc:Adlam}  matches  characters
       whose  basic  script is Adlam, whereas \p{scx:Adlam} matches, in addition, characters that
       have Adlam in their extensions list. The full names "script" and "script  extensions"  for
       the  property types are recognized, and a equals sign is an alternative to the colon. If a
       script name is given without a property type, for example, \p{Adlam},  it  is  treated  as
       \p{scx:Adlam}.  Perl  changed  to this interpretation at release 5.26 and PCRE2 changed at
       release 10.40.

       Unassigned characters (and in non-UTF 32-bit mode, characters  with  code  points  greater
       than  0x10FFFF)  are  assigned  the  "Unknown"  script.  Others  that  are  not part of an
       identified script are lumped together as "Common". The current list of  recognized  script
       names and their 4-character abbreviations can be obtained by running this command:

         pcre2test -LS

   The general category property for \p and \P

       Each  character  has  exactly  one  Unicode general category property, specified by a two-
       letter abbreviation. For compatibility with Perl, negation can be specified by including a
       circumflex  between  the  opening brace and the property name. For example, \p{^Lu} is the
       same as \P{Lu}.

       If only one letter is specified with \p or  \P,  it  includes  all  the  general  category
       properties  that  start  with  that  letter. In this case, in the absence of negation, the
       curly brackets in the escape sequence are optional;  these  two  examples  have  the  same
       effect:

         \p{L}
         \pL

       The following general category property codes are supported:

         C     Other
         Cc    Control
         Cf    Format
         Cn    Unassigned
         Co    Private use
         Cs    Surrogate

         L     Letter
         Ll    Lower case letter
         Lm    Modifier letter
         Lo    Other letter
         Lt    Title case letter
         Lu    Upper case letter

         M     Mark
         Mc    Spacing mark
         Me    Enclosing mark
         Mn    Non-spacing mark

         N     Number
         Nd    Decimal number
         Nl    Letter number
         No    Other number

         P     Punctuation
         Pc    Connector punctuation
         Pd    Dash punctuation
         Pe    Close punctuation
         Pf    Final punctuation
         Pi    Initial punctuation
         Po    Other punctuation
         Ps    Open punctuation

         S     Symbol
         Sc    Currency symbol
         Sk    Modifier symbol
         Sm    Mathematical symbol
         So    Other symbol

         Z     Separator
         Zl    Line separator
         Zp    Paragraph separator
         Zs    Space separator

       The  special  property  LC,  which  has  the  synonym  L&, is also supported: it matches a
       character that has the Lu, Ll, or Lt property, in  other  words,  a  letter  that  is  not
       classified as a modifier or "other".

       The  Cs (Surrogate) property applies only to characters whose code points are in the range
       U+D800 to U+DFFF. These characters are no different to any other character when  PCRE2  is
       not  in  UTF  mode  (using  the 16-bit or 32-bit library).  However, they are not valid in
       Unicode strings and so cannot be tested by PCRE2 in UTF mode, unless UTF validity checking
       has been turned off (see the discussion of PCRE2_NO_UTF_CHECK in the pcre2api page).

       The  long  synonyms  for  property  names  that Perl supports (such as \p{Letter}) are not
       supported by PCRE2, nor is it permitted to prefix any of these properties with "Is".

       No character that is in the Unicode table has the Cn (unassigned) property.  Instead, this
       property is assumed for any code point that is not in the Unicode table.

       Specifying  caseless  matching does not affect these escape sequences. For example, \p{Lu}
       always matches only upper case letters. This is different from the  behaviour  of  current
       versions of Perl.

   Binary (yes/no) properties for \p and \P

       Unicode  defines  a number of binary properties, that is, properties whose only values are
       true or false. You can obtain a list of those that are recognized by \p and \P, along with
       their abbreviations, by running this command:

         pcre2test -LP

   The Bidi_Class property for \p and \P

         \p{Bidi_Class:<class>}   matches a character with the given class
         \p{BC:<class>}           matches a character with the given class

       The recognized classes are:

         AL          Arabic letter
         AN          Arabic number
         B           paragraph separator
         BN          boundary neutral
         CS          common separator
         EN          European number
         ES          European separator
         ET          European terminator
         FSI         first strong isolate
         L           left-to-right
         LRE         left-to-right embedding
         LRI         left-to-right isolate
         LRO         left-to-right override
         NSM         non-spacing mark
         ON          other neutral
         PDF         pop directional format
         PDI         pop directional isolate
         R           right-to-left
         RLE         right-to-left embedding
         RLI         right-to-left isolate
         RLO         right-to-left override
         S           segment separator
         WS          which space

       An  equals sign may be used instead of a colon. The class names are case-insensitive; only
       the short names listed above are recognized.

   Extended grapheme clusters

       The \X escape matches any number of Unicode characters that  form  an  "extended  grapheme
       cluster",  and  treats  the  sequence  as  an  atomic group (see below).  Unicode supports
       various kinds of  composite  character  by  giving  each  character  a  grapheme  breaking
       property,  and having rules that use these properties to define the boundaries of extended
       grapheme clusters. The rules are defined in  Unicode  Standard  Annex  29,  "Unicode  Text
       Segmentation".  Unicode 11.0.0 abandoned the use of some previous properties that had been
       used for emojis.  Instead it introduced various emoji-specific properties. PCRE2 uses only
       the Extended Pictographic property.

       \X  always  matches  at  least  one  character.  Then it decides whether to add additional
       characters according to the following rules for ending a cluster:

       1. End at the end of the subject string.

       2. Do not end between CR and LF; otherwise end after any control character.

       3. Do not break Hangul (a Korean script) syllable sequences. Hangul characters are of five
       types:  L,  V,  T,  LV,  and  LVT.  An  L character may be followed by an L, V, LV, or LVT
       character; an LV or V character may be followed by a  V  or  T  character;  an  LVT  or  T
       character may be followed only by a T character.

       4.  Do  not  end  before  extending characters or spacing marks or the "zero-width joiner"
       character. Characters with the "mark" property always have the "extend" grapheme  breaking
       property.

       5. Do not end after prepend characters.

       6.  Do  not  break within emoji modifier sequences or emoji zwj sequences. That is, do not
       break  between  characters  with  the  Extended_Pictographic  property.   Extend  and  ZWJ
       characters are allowed between the characters.

       7.  Do  not  break  within  emoji  flag  sequences. That is, do not break between regional
       indicator (RI) characters if there are an odd number of RI  characters  before  the  break
       point.

       8. Otherwise, end the cluster.

   PCRE2's additional properties

       As  well as the standard Unicode properties described above, PCRE2 supports four more that
       make it possible to convert traditional escape sequences such as \w and \s to use  Unicode
       properties.  PCRE2  uses these non-standard, non-Perl properties internally when PCRE2_UCP
       is set. However, they may also be used explicitly. These properties are:

         Xan   Any alphanumeric character
         Xps   Any POSIX space character
         Xsp   Any Perl space character
         Xwd   Any Perl "word" character

       Xan matches characters that have either the L (letter) or the  N  (number)  property.  Xps
       matches the characters tab, linefeed, vertical tab, form feed, or carriage return, and any
       other character that has the Z (separator) property.  Xsp is the same as Xps; in PCRE1  it
       used  to  exclude  vertical tab, for Perl compatibility, but Perl changed. Xwd matches the
       same characters as Xan, plus underscore.

       There is another non-standard property, Xuc, which  matches  any  character  that  can  be
       represented  by  a  Universal Character Name in C++ and other programming languages. These
       are the characters $, @, ` (grave accent), and all characters  with  Unicode  code  points
       greater  than  or  equal  to U+00A0, except for the surrogates U+D800 to U+DFFF. Note that
       most base (ASCII) characters are excluded. (Universal Character  Names  are  of  the  form
       \uHHHH  or  \UHHHHHHHH where H is a hexadecimal digit. Note that the Xuc property does not
       match these sequences but the characters that they represent.)

   Resetting the match start

       In normal use, the escape sequence \K causes any previously matched characters not  to  be
       included in the final matched sequence that is returned. For example, the pattern:

         foo\Kbar

       matches  "foobar",  but  reports  that  it  has  matched  "bar". \K does not interact with
       anchoring in any way. The pattern:

         ^foo\Kbar

       matches only when the subject begins with "foobar" (in single line mode), though it  again
       reports  the  matched  string  as "bar". This feature is similar to a lookbehind assertion
       (described below).  However, in this case, the part of the subject before the  real  match
       does  not  have to be of fixed length, as lookbehind assertions do. The use of \K does not
       interfere with the setting of captured substrings.  For example, when the pattern

         (foo)\Kbar

       matches "foobar", the first substring is still set to "foo".

       From version 5.32.0 Perl forbids the use of \K  in  lookaround  assertions.  From  release
       10.38  PCRE2  also  forbids this by default. However, the PCRE2_EXTRA_ALLOW_LOOKAROUND_BSK
       option can be used when calling pcre2_compile() to re-enable the previous behaviour.  When
       this  option  is  set,  \K is acted upon when it occurs inside positive assertions, but is
       ignored in negative assertions. Note that when a pattern such  as  (?=ab\K)  matches,  the
       reported  start  of  the  match  can  be  greater than the end of the match. Using \K in a
       lookbehind assertion at the start of a pattern can also lead to odd effects. For  example,
       consider this pattern:

         (?<=\Kfoo)bar

       If  the  subject is "foobar", a call to pcre2_match() with a starting offset of 3 succeeds
       and reports the matching string as "foobar", that is, the start of the reported  match  is
       earlier than where the match started.

   Simple assertions

       The  final  use  of  backslash  is for certain simple assertions. An assertion specifies a
       condition that has to be met at a particular point  in  a  match,  without  consuming  any
       characters  from  the subject string. The use of groups for more complicated assertions is
       described below.  The backslashed assertions are:

         \b     matches at a word boundary
         \B     matches when not at a word boundary
         \A     matches at the start of the subject
         \Z     matches at the end of the subject
                 also matches before a newline at the end of the subject
         \z     matches only at the end of the subject
         \G     matches at the first matching position in the subject

       Inside a character class, \b has a different meaning; it matches the backspace  character.
       If  any  other  of  these  assertions  appears  in  a  character class, an "invalid escape
       sequence" error is generated.

       A word boundary is a position in the subject string where the current  character  and  the
       previous  character  do not both match \w or \W (i.e. one matches \w and the other matches
       \W), or the start or end of the  string  if  the  first  or  last  character  matches  \w,
       respectively.  When  PCRE2 is built with Unicode support, the meanings of \w and \W can be
       changed by setting the PCRE2_UCP option. When this is done, it also  affects  \b  and  \B.
       Neither  PCRE2  nor  Perl  has  a  separate "start of word" or "end of word" metasequence.
       However, whatever follows \b normally determines which it is. For  example,  the  fragment
       \ba matches "a" at the start of a word.

       The \A, \Z, and \z assertions differ from the traditional circumflex and dollar (described
       in the next section) in that they only ever match at the very start and end of the subject
       string,  whatever  options  are  set.  Thus, they are independent of multiline mode. These
       three assertions are not affected by  the  PCRE2_NOTBOL  or  PCRE2_NOTEOL  options,  which
       affect  only  the  behaviour  of the circumflex and dollar metacharacters. However, if the
       startoffset argument of pcre2_match() is non-zero, indicating that matching is to start at
       a  point  other  than  the  beginning  of the subject, \A can never match.  The difference
       between \Z and \z is that \Z matches before a newline at the end of the string as well  as
       at the very end, whereas \z matches only at the end.

       The  \G assertion is true only when the current matching position is at the start point of
       the matching process, as specified  by  the  startoffset  argument  of  pcre2_match().  It
       differs  from  \A  when  the  value  of  startoffset is non-zero. By calling pcre2_match()
       multiple times with appropriate arguments, you can mimic Perl's /g option, and  it  is  in
       this kind of implementation where \G can be useful.

       Note,  however, that PCRE2's implementation of \G, being true at the starting character of
       the matching process, is subtly different from Perl's, which defines it as true at the end
       of  the previous match. In Perl, these can be different when the previously matched string
       was empty. Because PCRE2 does  just  one  match  at  a  time,  it  cannot  reproduce  this
       behaviour.

       If  all  the  alternatives  of  a pattern begin with \G, the expression is anchored to the
       starting match  position,  and  the  "anchored"  flag  is  set  in  the  compiled  regular
       expression.

CIRCUMFLEX AND DOLLAR


       The circumflex and dollar metacharacters are zero-width assertions. That is, they test for
       a particular condition being true  without  consuming  any  characters  from  the  subject
       string. These two metacharacters are concerned with matching the starts and ends of lines.
       If the newline convention  is  set  so  that  only  the  two-character  sequence  CRLF  is
       recognized  as  a  newline,  isolated  CR  and  LF characters are treated as ordinary data
       characters, and are not recognized as newlines.

       Outside a character class, in the default matching mode, the circumflex  character  is  an
       assertion  that  is true only if the current matching point is at the start of the subject
       string. If the startoffset argument of pcre2_match() is non-zero, or  if  PCRE2_NOTBOL  is
       set, circumflex can never match if the PCRE2_MULTILINE option is unset. Inside a character
       class, circumflex has an entirely different meaning (see below).

       Circumflex need not be the first character of the pattern if a number of alternatives  are
       involved,  but it should be the first thing in each alternative in which it appears if the
       pattern is ever  to  match  that  branch.  If  all  possible  alternatives  start  with  a
       circumflex,  that  is,  if  the  pattern  is constrained to match only at the start of the
       subject, it is said to be an "anchored" pattern. (There are also other constructs that can
       cause a pattern to be anchored.)

       The dollar character is an assertion that is true only if the current matching point is at
       the end of the subject string, or immediately before a newline at the end  of  the  string
       (by  default),  unless PCRE2_NOTEOL is set. Note, however, that it does not actually match
       the newline. Dollar need not be  the  last  character  of  the  pattern  if  a  number  of
       alternatives  are  involved,  but  it  should  be  the last item in any branch in which it
       appears. Dollar has no special meaning in a character class.

       The meaning of dollar can be changed so that it matches  only  at  the  very  end  of  the
       string,  by  setting the PCRE2_DOLLAR_ENDONLY option at compile time. This does not affect
       the \Z assertion.

       The  meanings  of  the  circumflex  and  dollar  metacharacters   are   changed   if   the
       PCRE2_MULTILINE  option  is  set. When this is the case, a dollar character matches before
       any newlines in the string, as  well  as  at  the  very  end,  and  a  circumflex  matches
       immediately after internal newlines as well as at the start of the subject string. It does
       not match after a newline that ends the string, for compatibility with Perl. However, this
       can be changed by setting the PCRE2_ALT_CIRCUMFLEX option.

       For  example,  the  pattern  /^abc$/  matches  the  subject  string  "def\nabc"  (where \n
       represents a newline) in multiline mode, but not otherwise.  Consequently,  patterns  that
       are  anchored  in  single  line mode because all branches start with ^ are not anchored in
       multiline mode, and a match for circumflex is possible when the  startoffset  argument  of
       pcre2_match()  is  non-zero. The PCRE2_DOLLAR_ENDONLY option is ignored if PCRE2_MULTILINE
       is set.

       When the newline convention (see "Newline conventions" below) recognizes the two-character
       sequence CRLF as a newline, this is preferred, even if the single characters CR and LF are
       also recognized as newlines. For example, if the newline convention is "any", a  multiline
       mode circumflex matches before "xyz" in the string "abc\r\nxyz" rather than after CR, even
       though CR on its own is a valid newline. (It also matches at the very start of the string,
       of course.)

       Note  that  the  sequences  \A,  \Z,  and \z can be used to match the start and end of the
       subject in both modes, and if all branches of  a  pattern  start  with  \A  it  is  always
       anchored, whether or not PCRE2_MULTILINE is set.

FULL STOP (PERIOD, DOT) AND \N


       Outside  a  character class, a dot in the pattern matches any one character in the subject
       string except (by default) a character that signifies the end  of  a  line.  One  or  more
       characters may be specified as line terminators (see "Newline conventions" above).

       Dot  never matches a single line-ending character. When the two-character sequence CRLF is
       the only line ending, dot does not match CR if it  is  immediately  followed  by  LF,  but
       otherwise  it  matches  all  characters  (including isolated CRs and LFs). When ANYCRLF is
       selected for line endings, no occurences of CR of LF match  dot.  When  all  Unicode  line
       endings  are being recognized, dot does not match CR or LF or any of the other line ending
       characters.

       The behaviour of dot with regard to newlines can be changed. If the PCRE2_DOTALL option is
       set,  a  dot  matches any one character, without exception.  If the two-character sequence
       CRLF is present in the subject string, it takes two dots to match it.

       The handling of dot is entirely independent of the handling of circumflex and dollar,  the
       only  relationship  being that they both involve newlines. Dot has no special meaning in a
       character class.

       The escape sequence \N when not followed by an opening brace behaves like  a  dot,  except
       that  it  is  not  affected  by  the  PCRE2_DOTALL  option. In other words, it matches any
       character except one that signifies the end of a line.

       When \N is followed by an opening brace it  has  a  different  meaning.  See  the  section
       entitled  "Non-printing  characters" above for details. Perl also uses \N{name} to specify
       characters by Unicode name; PCRE2 does not support this.

MATCHING A SINGLE CODE UNIT


       Outside a character class, the escape sequence \C matches any one code  unit,  whether  or
       not  a  UTF  mode  is  set. In the 8-bit library, one code unit is one byte; in the 16-bit
       library it is a 16-bit unit; in the 32-bit library it is a 32-bit unit. Unlike a  dot,  \C
       always  matches  line-ending characters. The feature is provided in Perl in order to match
       individual bytes in UTF-8 mode, but it is unclear how it can usefully be used.

       Because \C breaks up characters into individual code units, matching one unit with  \C  in
       UTF-8  or  UTF-16  mode  means  that the rest of the string may start with a malformed UTF
       character. This has undefined results, because PCRE2 assumes that it is matching character
       by  character in a valid UTF string (by default it checks the subject string's validity at
       the start of processing unless the PCRE2_NO_UTF_CHECK or PCRE2_MATCH_INVALID_UTF option is
       used).

       An  application  can  lock out the use of \C by setting the PCRE2_NEVER_BACKSLASH_C option
       when compiling a pattern. It  is  also  possible  to  build  PCRE2  with  the  use  of  \C
       permanently disabled.

       PCRE2  does  not allow \C to appear in lookbehind assertions (described below) in UTF-8 or
       UTF-16 modes, because this would make  it  impossible  to  calculate  the  length  of  the
       lookbehind.  Neither  the  alternative  matching  function  pcre2_dfa_match()  nor the JIT
       optimizer support \C in these UTF modes.  The former gives a match-time error; the  latter
       fails to optimize and so the match is always run using the interpreter.

       In  the  32-bit  library, however, \C is always supported (when not explicitly locked out)
       because it always matches a single code unit, whether or not UTF-32 is specified.

       In general, the \C escape sequence is best avoided. However, one  way  of  using  it  that
       avoids  the problem of malformed UTF-8 or UTF-16 characters is to use a lookahead to check
       the length of the next character, as in this pattern, which could be  used  with  a  UTF-8
       string (ignore white space and line breaks):

         (?| (?=[\x00-\x7f])(\C) |
             (?=[\x80-\x{7ff}])(\C)(\C) |
             (?=[\x{800}-\x{ffff}])(\C)(\C)(\C) |
             (?=[\x{10000}-\x{1fffff}])(\C)(\C)(\C)(\C))

       In  this example, a group that starts with (?| resets the capturing parentheses numbers in
       each alternative (see "Duplicate Group Numbers" below). The assertions  at  the  start  of
       each  branch  check  the next UTF-8 character for values whose encoding uses 1, 2, 3, or 4
       bytes, respectively. The character's individual bytes are then captured by the appropriate
       number of \C groups.

SQUARE BRACKETS AND CHARACTER CLASSES


       An  opening  square  bracket  introduces a character class, terminated by a closing square
       bracket. A closing square bracket on its own is not special  by  default.   If  a  closing
       square bracket is required as a member of the class, it should be the first data character
       in the class (after an initial circumflex, if present) or escaped with a  backslash.  This
       means   that,   by   default,   an   empty  class  cannot  be  defined.  However,  if  the
       PCRE2_ALLOW_EMPTY_CLASS option is set, a closing square bracket at the start does end  the
       (empty) class.

       A  character  class matches a single character in the subject. A matched character must be
       in the set of characters defined by the class, unless the first  character  in  the  class
       definition  is  a  circumflex,  in which case the subject character must not be in the set
       defined by the class. If a circumflex is actually required  as  a  member  of  the  class,
       ensure it is not the first character, or escape it with a backslash.

       For  example,  the  character  class  [aeiou] matches any lower case vowel, while [^aeiou]
       matches any character that is not a lower case vowel. Note that a  circumflex  is  just  a
       convenient  notation  for  specifying  the characters that are in the class by enumerating
       those that are not. A class that starts with a circumflex is not an  assertion;  it  still
       consumes  a  character  from  the  subject  string,  and therefore it fails if the current
       pointer is at the end of the string.

       Characters in a class may be specified by their code points using \o, \x, or \N{U+hh..} in
       the  usual way. When caseless matching is set, any letters in a class represent both their
       upper case and lower case versions, so for example, a caseless [aeiou] matches "A" as well
       as  "a", and a caseless [^aeiou] does not match "A", whereas a caseful version would. Note
       that there are two ASCII characters, K and S, that, in addition to their lower case  ASCII
       equivalents,  are  case-equivalent  with  Unicode U+212A (Kelvin sign) and U+017F (long S)
       respectively when either PCRE2_UTF or PCRE2_UCP is set.

       Characters that might indicate line breaks are never  treated  in  any  special  way  when
       matching  character classes, whatever line-ending sequence is in use, and whatever setting
       of the PCRE2_DOTALL and PCRE2_MULTILINE options is used.  A  class  such  as  [^a]  always
       matches one of these characters.

       The  generic  character  type escape sequences \d, \D, \h, \H, \p, \P, \s, \S, \v, \V, \w,
       and \W may appear in a character class, and add the characters  that  they  match  to  the
       class.  For example, [\dABCDEF] matches any hexadecimal digit. In UTF modes, the PCRE2_UCP
       option affects the meanings of \d, \s, \w and their upper case partners, just as  it  does
       when  they appear outside a character class, as described in the section entitled "Generic
       character types" above. The escape sequence \b has a different meaning inside a  character
       class;  it  matches  the backspace character. The sequences \B, \R, and \X are not special
       inside a character class. Like any other unrecognized  escape  sequences,  they  cause  an
       error. The same is true for \N when not followed by an opening brace.

       The  minus  (hyphen) character can be used to specify a range of characters in a character
       class. For example, [d-m] matches any letter between  d  and  m,  inclusive.  If  a  minus
       character  is  required  in  a  class,  it must be escaped with a backslash or appear in a
       position where it cannot be interpreted as indicating a range, typically as the  first  or
       last  character  in  the class, or immediately after a range. For example, [b-d-z] matches
       letters in the range b to d, a hyphen character, or z.

       Perl treats a hyphen as a literal if it appears before or after a POSIX class (see  below)
       or  before  or  after  a  character  type escape such as as \d or \H.  However, unless the
       hyphen is the last character in the class, Perl outputs a warning in its warning mode,  as
       this  is most likely a user error. As PCRE2 has no facility for warning, an error is given
       in these cases.

       It is not possible to have the literal character "]" as the end character of  a  range.  A
       pattern such as [W-]46] is interpreted as a class of two characters ("W" and "-") followed
       by a literal string "46]", so it would match "W46]" or "-46]".  However,  if  the  "]"  is
       escaped with a backslash it is interpreted as the end of range, so [W-\]46] is interpreted
       as a class containing a range followed by two other characters. The octal  or  hexadecimal
       representation of "]" can also be used to end a range.

       Ranges  normally  include all code points between the start and end characters, inclusive.
       They can also be used for code points  specified  numerically,  for  example  [\000-\037].
       Ranges  can  include  any characters that are valid for the current mode. In any UTF mode,
       the so-called "surrogate" characters (those whose  code  points  lie  between  0xd800  and
       0xdfff    inclusive)    may    not    be    specified    explicitly    by   default   (the
       PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES option disables this check). However, ranges  such  as
       [\x{d7ff}-\x{e000}], which include the surrogates, are always permitted.

       There  is  a  special  case  in  EBCDIC  environments for ranges whose end points are both
       specified as literal letters in the same case. For compatibility with  Perl,  EBCDIC  code
       points  within the range that are not letters are omitted. For example, [h-k] matches only
       four characters, even though the codes for h and k are 0x88 and 0x92, a range of  11  code
       points.  However,  if  the  range  is  specified  numerically, for example, [\x88-\x92] or
       [h-\x92], all code points are included.

       If a range that includes letters is used when caseless matching is  set,  it  matches  the
       letters  in  either  case.  For  example, [W-c] is equivalent to [][\\^_`wxyzabc], matched
       caselessly, and in a non-UTF mode, if character tables for a French  locale  are  in  use,
       [\xc8-\xcb] matches accented E characters in both cases.

       A  circumflex  can  conveniently  be used with the upper case character types to specify a
       more restricted set of characters than the matching lower case  type.   For  example,  the
       class  [^\W_]  matches  any  letter  or  digit,  but not underscore, whereas [\w] includes
       underscore. A positive character class should be read as "something OR something  OR  ..."
       and a negative class as "NOT something AND NOT something AND NOT ...".

       The  only  metacharacters  that  are recognized in character classes are backslash, hyphen
       (only where it can be interpreted as specifying a range), circumflex (only at the  start),
       opening square bracket (only when it can be interpreted as introducing a POSIX class name,
       or for a special compatibility feature - see the next two sections), and  the  terminating
       closing square bracket. However, escaping other non-alphanumeric characters does no harm.

POSIX CHARACTER CLASSES


       Perl supports the POSIX notation for character classes. This uses names enclosed by [: and
       :] within the enclosing square brackets. PCRE2 also supports this notation. For example,

         [01[:alpha:]%]

       matches "0", "1", any alphabetic character, or "%". The supported class names are:

         alnum    letters and digits
         alpha    letters
         ascii    character codes 0 - 127
         blank    space or tab only
         cntrl    control characters
         digit    decimal digits (same as \d)
         graph    printing characters, excluding space
         lower    lower case letters
         print    printing characters, including space
         punct    printing characters, excluding letters and digits and space
         space    white space (the same as \s from PCRE2 8.34)
         upper    upper case letters
         word     "word" characters (same as \w)
         xdigit   hexadecimal digits

       The default "space" characters are HT (9), LF (10), VT (11), FF (12), CR (13),  and  space
       (32).  If  locale-specific  matching  is taking place, the list of space characters may be
       different; there may be fewer or more of them. "Space"  and  \s  match  the  same  set  of
       characters.

       The name "word" is a Perl extension, and "blank" is a GNU extension from Perl 5.8. Another
       Perl extension is negation, which is indicated by a  ^  character  after  the  colon.  For
       example,

         [12[:^digit:]]

       matches  "1",  "2",  or  any  non-digit.  PCRE2 (and Perl) also recognize the POSIX syntax
       [.ch.] and [=ch=] where "ch" is a "collating element", but these are not supported, and an
       error is given if they are encountered.

       By  default,  characters  with  values  greater  than  127  do  not match any of the POSIX
       character classes, although this may be different for characters in the range 128-255 when
       locale-specific  matching  is  happening.  However,  if  the PCRE2_UCP option is passed to
       pcre2_compile(), some of the classes are changed so that Unicode character properties  are
       used.  This  is  achieved  by  replacing  certain  POSIX  classes with other sequences, as
       follows:

         [:alnum:]  becomes  \p{Xan}
         [:alpha:]  becomes  \p{L}
         [:blank:]  becomes  \h
         [:cntrl:]  becomes  \p{Cc}
         [:digit:]  becomes  \p{Nd}
         [:lower:]  becomes  \p{Ll}
         [:space:]  becomes  \p{Xps}
         [:upper:]  becomes  \p{Lu}
         [:word:]   becomes  \p{Xwd}

       Negated versions, such as [:^alpha:] use \P instead of \p. Three other POSIX  classes  are
       handled specially in UCP mode:

       [:graph:] This  matches  characters  that  have glyphs that mark the page when printed. In
                 Unicode property terms, it matches all characters with the L, M, N, P, S, or  Cf
                 properties, except for:

                   U+061C           Arabic Letter Mark
                   U+180E           Mongolian Vowel Separator
                   U+2066 - U+2069  Various "isolate"s

       [:print:] This matches the same characters as [:graph:] plus space characters that are not
                 controls, that is, characters with the Zs property.

       [:punct:] This matches all characters that have the Unicode P (punctuation) property, plus
                 those  characters  with  code  points  less  than  256  that have the S (Symbol)
                 property.

       The other POSIX classes are unchanged, and match only characters  with  code  points  less
       than 256.

COMPATIBILITY FEATURE FOR WORD BOUNDARIES


       In the POSIX.2 compliant library that was included in 4.4BSD Unix, the ugly syntax [[:<:]]
       and [[:>:]] is used for matching "start of word" and "end of  word".  PCRE2  treats  these
       items as follows:

         [[:<:]]  is converted to  \b(?=\w)
         [[:>:]]  is converted to  \b(?<=\w)

       Only these exact character sequences are recognized. A sequence such as [a[:<:]b] provokes
       error for an unrecognized POSIX class name. This support is not compatible with  Perl.  It
       is  provided  to  help migrations from other environments, and is best not used in any new
       patterns. Note that \b matches at the start and the end of a word (see "Simple assertions"
       above),  and  in  a Perl-style pattern the preceding or following character normally shows
       which is wanted, without the need for the assertions that are used above in order to  give
       exactly the POSIX behaviour.

VERTICAL BAR


       Vertical  bar  characters  are  used  to  separate  alternative patterns. For example, the
       pattern

         gilbert|sullivan

       matches either "gilbert" or "sullivan". Any number of  alternatives  may  appear,  and  an
       empty  alternative  is  permitted  (matching the empty string). The matching process tries
       each alternative in turn, from left to right, and the first one that succeeds is used.  If
       the alternatives are within a group (defined below), "succeeds" means matching the rest of
       the main pattern as well as the alternative in the group.

INTERNAL OPTION SETTING


       The  settings  of  the  PCRE2_CASELESS,  PCRE2_MULTILINE,  PCRE2_DOTALL,   PCRE2_EXTENDED,
       PCRE2_EXTENDED_MORE,  and  PCRE2_NO_AUTO_CAPTURE  options  can  be changed from within the
       pattern by a sequence of letters enclosed between "(?"  and ")". These options  are  Perl-
       compatible,  and are described in detail in the pcre2api documentation. The option letters
       are:

         i  for PCRE2_CASELESS
         m  for PCRE2_MULTILINE
         n  for PCRE2_NO_AUTO_CAPTURE
         s  for PCRE2_DOTALL
         x  for PCRE2_EXTENDED
         xx for PCRE2_EXTENDED_MORE

       For example, (?im) sets caseless, multiline matching. It is also possible to  unset  these
       options  by  preceding  the  relevant  letters  with a hyphen, for example (?-im). The two
       "extended" options are not independent; unsetting either one cancels the effects  of  both
       of them.

       A  combined  setting  and  unsetting  such  as  (?im-sx),  which  sets  PCRE2_CASELESS and
       PCRE2_MULTILINE while unsetting PCRE2_DOTALL and PCRE2_EXTENDED, is also  permitted.  Only
       one hyphen may appear in the options string. If a letter appears both before and after the
       hyphen, the option is unset. An empty options setting "(?)" is allowed. Needless  to  say,
       it has no effect.

       If the first character following (? is a circumflex, it causes all of the above options to
       be unset. Thus, (?^) is equivalent to (?-imnsx). Letters  may  follow  the  circumflex  to
       cause some options to be re-instated, but a hyphen may not appear.

       The  PCRE2-specific  options  PCRE2_DUPNAMES and PCRE2_UNGREEDY can be changed in the same
       way as the Perl-compatible options by using the characters J and U respectively.  However,
       these are not unset by (?^).

       When  one  of  these  option  changes  occurs  at  top  level  (that  is, not inside group
       parentheses), the change applies to the remainder of the pattern that follows.  An  option
       change  within  a  group (see below for a description of groups) affects only that part of
       the group that follows it, so

         (a(?i)b)c

       matches abc and aBc and no other strings (assuming PCRE2_CASELESS is not used).   By  this
       means,  options  can be made to have different settings in different parts of the pattern.
       Any changes made in one alternative do carry on into subsequent branches within  the  same
       group. For example,

         (a(?i)b|c)

       matches  "ab",  "aB",  "c",  and  "C",  even  though when matching "C" the first branch is
       abandoned before the option setting. This is because the effects of option settings happen
       at compile time. There would be some very weird behaviour otherwise.

       As  a  convenient  shorthand,  if  any option settings are required at the start of a non-
       capturing group (see the next section), the option letters may appear between the "?"  and
       the ":". Thus the two patterns

         (?i:saturday|sunday)
         (?:(?i)saturday|sunday)

       match exactly the same set of strings.

       Note:  There are other PCRE2-specific options, applying to the whole pattern, which can be
       set by the application when the compiling function is called. In addition, the pattern can
       contain special leading sequences such as (*CRLF) to override what the application has set
       or what has been defaulted.  Details are given in the section entitled "Newline sequences"
       above.  There are also the (*UTF) and (*UCP) leading sequences that can be used to set UTF
       and Unicode property modes; they are equivalent to setting  the  PCRE2_UTF  and  PCRE2_UCP
       options,   respectively.   However,  the  application  can  set  the  PCRE2_NEVER_UTF  and
       PCRE2_NEVER_UCP options, which lock out the use of the (*UTF) and (*UCP) sequences.

GROUPS


       Groups are delimited by parentheses (round brackets), which can be nested.   Turning  part
       of a pattern into a group does two things:

       1. It localizes a set of alternatives. For example, the pattern

         cat(aract|erpillar|)

       matches  "cataract",  "caterpillar",  or  "cat".  Without  the parentheses, it would match
       "cataract", "erpillar" or an empty string.

       2. It creates a "capture group". This means that, when  the  whole  pattern  matches,  the
       portion  of  the  subject  string  that  matched  the  group is passed back to the caller,
       separately from the portion that matched the whole pattern.  (This  applies  only  to  the
       traditional matching function; the DFA matching function does not support capturing.)

       Opening parentheses are counted from left to right (starting from 1) to obtain numbers for
       capture groups. For example, if the string "the red king" is matched against the pattern

         the ((red|white) (king|queen))

       the captured substrings are "red king", "red", and "king", and are numbered 1, 2,  and  3,
       respectively.

       The  fact  that  plain  parentheses fulfil two functions is not always helpful.  There are
       often times when grouping is required without capturing.  If  an  opening  parenthesis  is
       followed  by  a question mark and a colon, the group does not do any capturing, and is not
       counted when computing the number of any subsequent capture groups. For  example,  if  the
       string "the white queen" is matched against the pattern

         the ((?:red|white) (king|queen))

       the  captured  substrings  are  "white  queen"  and "queen", and are numbered 1 and 2. The
       maximum number of capture groups is 65535.

       As a convenient shorthand, if any option settings are required at  the  start  of  a  non-
       capturing  group,  the option letters may appear between the "?" and the ":". Thus the two
       patterns

         (?i:saturday|sunday)
         (?:(?i)saturday|sunday)

       match exactly the same set of strings. Because alternative branches are tried from left to
       right,  and options are not reset until the end of the group is reached, an option setting
       in one branch does affect subsequent branches, so the above  patterns  match  "SUNDAY"  as
       well as "Saturday".

DUPLICATE GROUP NUMBERS


       Perl  5.10  introduced a feature whereby each alternative in a group uses the same numbers
       for its capturing parentheses. Such a group starts with (?| and is itself a  non-capturing
       group. For example, consider this pattern:

         (?|(Sat)ur|(Sun))day

       Because  the  two  alternatives are inside a (?| group, both sets of capturing parentheses
       are numbered one. Thus, when the pattern matches,  you  can  look  at  captured  substring
       number  one,  whichever  alternative  matched.  This  construct is useful when you want to
       capture part, but not all, of one of  a  number  of  alternatives.  Inside  a  (?|  group,
       parentheses  are  numbered  as usual, but the number is reset at the start of each branch.
       The numbers of any capturing parentheses that follow  the  whole  group  start  after  the
       highest  number  used  in  any  branch.  The  following  example  is  taken  from the Perl
       documentation. The numbers underneath show in which buffer the captured  content  will  be
       stored.

         # before  ---------------branch-reset----------- after
         / ( a )  (?| x ( y ) z | (p (q) r) | (t) u (v) ) ( z ) /x
         # 1            2         2  3        2     3     4

       A  backreference  to a capture group uses the most recent value that is set for the group.
       The following pattern matches "abcabc" or "defdef":

         /(?|(abc)|(def))\1/

       In contrast, a subroutine call to a capture group always refers to the first  one  in  the
       pattern with the given number. The following pattern matches "abcabc" or "defabc":

         /(?|(abc)|(def))(?1)/

       A  relative  reference  such  as  (?-1)  is  no  different: it is just a convenient way of
       computing an absolute group number.

       If a condition test for a group's having matched refers to a non-unique number,  the  test
       is true if any group with that number has matched.

       An  alternative  approach  to  using this "branch reset" feature is to use duplicate named
       groups, as described in the next section.

NAMED CAPTURE GROUPS


       Identifying capture groups by number is simple, but it can be very hard to keep  track  of
       the  numbers  in  complicated  patterns.  Furthermore,  if  an expression is modified, the
       numbers may change. To help with this difficulty, PCRE2 supports  the  naming  of  capture
       groups.  This  feature  was  not  added to Perl until release 5.10. Python had the feature
       earlier, and PCRE1 introduced it at release 4.0, using the Python syntax.  PCRE2  supports
       both the Perl and the Python syntax.

       In  PCRE2, a capture group can be named in one of three ways: (?<name>...) or (?'name'...)
       as in Perl, or (?P<name>...) as in Python. Names may be up to 32  code  units  long.  When
       PCRE2_UTF is not set, they may contain only ASCII alphanumeric characters and underscores,
       but must start with a non-digit. When PCRE2_UTF is set,  the  syntax  of  group  names  is
       extended to allow any Unicode letter or Unicode decimal digit. In other words, group names
       must match one of these patterns:

         ^[_A-Za-z][_A-Za-z0-9]*\z   when PCRE2_UTF is not set
         ^[_\p{L}][_\p{L}\p{Nd}]*\z  when PCRE2_UTF is set

       References to capture groups from other parts of  the  pattern,  such  as  backreferences,
       recursion, and conditions, can all be made by name as well as by number.

       Named  capture groups are allocated numbers as well as names, exactly as if the names were
       not present. In both PCRE2 and Perl, capture groups are primarily identified  by  numbers;
       any  names  are  just aliases for these numbers. The PCRE2 API provides function calls for
       extracting the complete name-to-number translation table from a compiled pattern, as  well
       as convenience functions for extracting captured substrings by name.

       Warning:  When  more  than  one  capture  group  has  the same number, as described in the
       previous section, a name given to one  of  them  applies  to  all  of  them.  Perl  allows
       identically  numbered  groups to have different names.  Consider this pattern, where there
       are two capture groups, both numbered 1:

         (?|(?<AA>aa)|(?<BB>bb))

       Perl allows this, with both names AA  and  BB  as  aliases  of  group  1.  Thus,  after  a
       successful match, both names yield the same value (either "aa" or "bb").

       In  an  attempt  to  reduce  confusion,  PCRE2  does not allow the same group number to be
       associated with more than one name. The  example  above  provokes  a  compile-time  error.
       However, there is still scope for confusion. Consider this pattern:

         (?|(?<AA>aa)|(bb))

       Although  the second group number 1 is not explicitly named, the name AA is still an alias
       for any group 1. Whether the pattern matches "aa" or "bb", a reference by name to group AA
       yields the matched string.

       By  default,  a  name  must  be  unique  within a pattern, except that duplicate names are
       permitted for groups with the same number, for example:

         (?|(?<AA>aa)|(?<AA>bb))

       The duplicate name constraint can be disabled by  setting  the  PCRE2_DUPNAMES  option  at
       compile  time,  or  by  the  use  of  (?J) within the pattern, as described in the section
       entitled "Internal Option Setting" above.

       Duplicate names can be useful for patterns where only one instance of  the  named  capture
       group  can  match.  Suppose  you want to match the name of a weekday, either as a 3-letter
       abbreviation or as the full name, and in both cases you want to extract the  abbreviation.
       This pattern (ignoring the line breaks) does the job:

         (?J)
         (?<DN>Mon|Fri|Sun)(?:day)?|
         (?<DN>Tue)(?:sday)?|
         (?<DN>Wed)(?:nesday)?|
         (?<DN>Thu)(?:rsday)?|
         (?<DN>Sat)(?:urday)?

       There  are  five  capture  groups, but only one is ever set after a match. The convenience
       functions for extracting the data by name returns the substring for the first (and in this
       example,  the  only)  group  of that name that matched. This saves searching to find which
       numbered group it was. (An alternative way of solving this problem is  to  use  a  "branch
       reset" group, as described in the previous section.)

       If you make a backreference to a non-unique named group from elsewhere in the pattern, the
       groups to which the name refers are checked in the order  in  which  they  appear  in  the
       overall  pattern.  The  first one that is set is used for the reference. For example, this
       pattern matches both "foofoo" and "barbar" but not "foobar" or "barfoo":

         (?J)(?:(?<n>foo)|(?<n>bar))\k<n>

       If you make a subroutine call to a non-unique named group, the one that corresponds to the
       first  occurrence of the name is used. In the absence of duplicate numbers this is the one
       with the lowest number.

       If you use a named reference in a condition test (see the section about conditions below),
       either to check whether a capture group has matched, or to check for recursion, all groups
       with the same name are tested. If the condition is true for any one of them,  the  overall
       condition is true. This is the same behaviour as testing by number. For further details of
       the interfaces for handling named capture groups, see the pcre2api documentation.

REPETITION


       Repetition is specified by quantifiers, which can follow any of the following items:

         a literal data character
         the dot metacharacter
         the \C escape sequence
         the \R escape sequence
         the \X escape sequence
         an escape such as \d or \pL that matches a single character
         a character class
         a backreference
         a parenthesized group (including lookaround assertions)
         a subroutine call (recursive or otherwise)

       The general repetition quantifier specifies a minimum  and  maximum  number  of  permitted
       matches,  by  giving the two numbers in curly brackets (braces), separated by a comma. The
       numbers must be less than 65536, and the first must be less than or equal to  the  second.
       For example,

         z{2,4}

       matches  "zz", "zzz", or "zzzz". A closing brace on its own is not a special character. If
       the second number is omitted, but the comma is present, there is no upper  limit;  if  the
       second  number and the comma are both omitted, the quantifier specifies an exact number of
       required matches. Thus

         [aeiou]{3,}

       matches at least 3 successive vowels, but may match many more, whereas

         \d{8}

       matches exactly 8 digits. An opening curly bracket that appears  in  a  position  where  a
       quantifier is not allowed, or one that does not match the syntax of a quantifier, is taken
       as a literal character. For example, {,6} is not a quantifier, but  a  literal  string  of
       four characters.

       In  UTF modes, quantifiers apply to characters rather than to individual code units. Thus,
       for example, \x{100}{2} matches two characters, each of which is represented by a two-byte
       sequence  in  a  UTF-8  string.  Similarly,  \X{3} matches three Unicode extended grapheme
       clusters, each of which may be several code units long  (and  they  may  be  of  different
       lengths).

       The  quantifier {0} is permitted, causing the expression to behave as if the previous item
       and the quantifier were not present. This may  be  useful  for  capture  groups  that  are
       referenced as subroutines from elsewhere in the pattern (but see also the section entitled
       "Defining capture groups for use by  reference  only"  below).  Except  for  parenthesized
       groups, items that have a {0} quantifier are omitted from the compiled pattern.

       For convenience, the three most common quantifiers have single-character abbreviations:

         *    is equivalent to {0,}
         +    is equivalent to {1,}
         ?    is equivalent to {0,1}

       It  is  possible  to  construct  infinite  loops  by  following  a group that can match no
       characters with a quantifier that has no upper limit, for example:

         (a?)*

       Earlier versions of Perl and PCRE1 used  to  give  an  error  at  compile  time  for  such
       patterns. However, because there are cases where this can be useful, such patterns are now
       accepted, but whenever an iteration of such a group matches no characters, matching  moves
       on  to  the  next item in the pattern instead of repeatedly matching an empty string. This
       does not prevent backtracking into any of the iterations if a  subsequent  item  fails  to
       match.

       By  default,  quantifiers are "greedy", that is, they match as much as possible (up to the
       maximum number of permitted times), without causing the rest of the pattern to  fail.  The
       classic example of where this gives problems is in trying to match comments in C programs.
       These appear between /* and */ and within the comment, individual * and /  characters  may
       appear. An attempt to match C comments by applying the pattern

         /\*.*\*/

       to the string

         /* first comment */  not comment  /* second comment */

       fails,  because  it  matches  the  entire  string owing to the greediness of the .*  item.
       However, if a quantifier is followed by a question mark,  it  ceases  to  be  greedy,  and
       instead matches the minimum number of times possible, so the pattern

         /\*.*?\*/

       does  the  right  thing with the C comments. The meaning of the various quantifiers is not
       otherwise changed, just the preferred number of matches.   Do  not  confuse  this  use  of
       question  mark  with its use as a quantifier in its own right. Because it has two uses, it
       can sometimes appear doubled, as in

         \d??\d

       which matches one digit by preference, but can match two if that is the only way the  rest
       of the pattern matches.

       If  the  PCRE2_UNGREEDY  option  is  set  (an  option  that is not available in Perl), the
       quantifiers are not greedy by default, but individual ones can be made greedy by following
       them with a question mark. In other words, it inverts the default behaviour.

       When  a parenthesized group is quantified with a minimum repeat count that is greater than
       1 or with a limited maximum,  more  memory  is  required  for  the  compiled  pattern,  in
       proportion to the size of the minimum or maximum.

       If a pattern starts with .* or .{0,} and the PCRE2_DOTALL option (equivalent to Perl's /s)
       is set, thus allowing the dot to match  newlines,  the  pattern  is  implicitly  anchored,
       because  whatever  follows  will  be tried against every character position in the subject
       string, so there is no point in retrying the overall  match  at  any  position  after  the
       first. PCRE2 normally treats such a pattern as though it were preceded by \A.

       In  cases  where  it  is  known  that the subject string contains no newlines, it is worth
       setting PCRE2_DOTALL in order to obtain this optimization, or alternatively,  using  ^  to
       indicate anchoring explicitly.

       However,  there  are  some cases where the optimization cannot be used. When .*  is inside
       capturing parentheses that are the subject of a backreference elsewhere in the pattern,  a
       match at the start may fail where a later one succeeds. Consider, for example:

         (.*)abc\1

       If the subject is "xyz123abc123" the match point is the fourth character. For this reason,
       such a pattern is not implicitly anchored.

       Another case where implicit anchoring is not applied is when the leading .* is  inside  an
       atomic  group.  Once  again,  a  match  at  the start may fail where a later one succeeds.
       Consider this pattern:

         (?>.*?a)b

       It matches "ab" in the subject "aab". The use of the backtracking control  verbs  (*PRUNE)
       and    (*SKIP)    also    disable   this   optimization,   and   there   is   an   option,
       PCRE2_NO_DOTSTAR_ANCHOR, to do so explicitly.

       When a capture group is repeated, the value captured is the  substring  that  matched  the
       final iteration. For example, after

         (tweedle[dume]{3}\s*)+

       has  matched  "tweedledum tweedledee" the value of the captured substring is "tweedledee".
       However, if there are nested capture groups, the corresponding captured  values  may  have
       been set in previous iterations. For example, after

         (a|(b))+

       matches "aba" the value of the second captured substring is "b".

ATOMIC GROUPING AND POSSESSIVE QUANTIFIERS


       With  both maximizing ("greedy") and minimizing ("ungreedy" or "lazy") repetition, failure
       of what follows normally causes the repeated item to be re-evaluated to see if a different
       number  of  repeats  allows  the  rest  of the pattern to match. Sometimes it is useful to
       prevent this, either to change the nature of the match, or to cause it fail  earlier  than
       it otherwise might, when the author of the pattern knows there is no point in carrying on.

       Consider, for example, the pattern \d+foo when applied to the subject line

         123456bar

       After  matching  all  6  digits  and then failing to match "foo", the normal action of the
       matcher is to try again with only 5 digits matching the \d+ item, and then with 4, and  so
       on, before ultimately failing. "Atomic grouping" (a term taken from Jeffrey Friedl's book)
       provides the means for specifying that once a group has matched,  it  is  not  to  be  re-
       evaluated in this way.

       If  we  use  atomic grouping for the previous example, the matcher gives up immediately on
       failing to match "foo" the first time. The notation is  a  kind  of  special  parenthesis,
       starting with (?> as in this example:

         (?>\d+)foo

       Perl  5.28 introduced an experimental alphabetic form starting with (* which may be easier
       to remember:

         (*atomic:\d+)foo

       This kind of parenthesized group "locks up" the part of the pattern it  contains  once  it
       has  matched,  and  a failure further into the pattern is prevented from backtracking into
       it. Backtracking past it to previous items, however, works as normal.

       An alternative description is that a group of this type  matches  exactly  the  string  of
       characters  that  an  identical standalone pattern would match, if anchored at the current
       point in the subject string.

       Atomic groups are not capture groups. Simple cases  such  as  the  above  example  can  be
       thought of as a maximizing repeat that must swallow everything it can.  So, while both \d+
       and \d+? are prepared to adjust the number of digits they match in order to make the  rest
       of the pattern match, (?>\d+) can only match an entire sequence of digits.

       Atomic  groups  in  general can of course contain arbitrarily complicated expressions, and
       can be nested. However, when the contents of an atomic group is  just  a  single  repeated
       item, as in the example above, a simpler notation, called a "possessive quantifier" can be
       used. This consists of an additional  +  character  following  a  quantifier.  Using  this
       notation, the previous example can be rewritten as

         \d++foo

       Note that a possessive quantifier can be used with an entire group, for example:

         (abc|xyz){2,3}+

       Possessive  quantifiers  are  always  greedy;  the setting of the PCRE2_UNGREEDY option is
       ignored. They are a convenient notation for the simpler forms of  atomic  group.  However,
       there is no difference in the meaning of a possessive quantifier and the equivalent atomic
       group, though there may be a performance  difference;  possessive  quantifiers  should  be
       slightly faster.

       The  possessive  quantifier syntax is an extension to the Perl 5.8 syntax.  Jeffrey Friedl
       originated the idea (and the name) in the first edition of his book. Mike McCloskey  liked
       it, so implemented it when he built Sun's Java package, and PCRE1 copied it from there. It
       found its way into Perl at release 5.10.

       PCRE2 has  an  optimization  that  automatically  "possessifies"  certain  simple  pattern
       constructs.  For example, the sequence A+B is treated as A++B because there is no point in
       backtracking into a sequence of A's when B must follow.  This feature can be  disabled  by
       the PCRE2_NO_AUTOPOSSESS option, or starting the pattern with (*NO_AUTO_POSSESS).

       When  a pattern contains an unlimited repeat inside a group that can itself be repeated an
       unlimited number of times, the use of an atomic group  is  the  only  way  to  avoid  some
       failing matches taking a very long time indeed. The pattern

         (\D+|<\d+>)*[!?]

       matches  an  unlimited  number  of substrings that either consist of non-digits, or digits
       enclosed in <>, followed by either ! or ?. When it matches, it runs quickly.  However,  if
       it is applied to

         aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

       it  takes  a long time before reporting failure. This is because the string can be divided
       between the internal \D+ repeat and the external * repeat in a large number of  ways,  and
       all  have  to  be tried. (The example uses [!?] rather than a single character at the end,
       because both PCRE2 and Perl have an optimization that  allows  for  fast  failure  when  a
       single  character  is used. They remember the last single character that is required for a
       match, and fail early if it is not present in the string.) If the pattern  is  changed  so
       that it uses an atomic group, like this:

         ((?>\D+)|<\d+>)*[!?]

       sequences of non-digits cannot be broken, and failure happens quickly.

BACKREFERENCES


       Outside  a  character  class, a backslash followed by a digit greater than 0 (and possibly
       further digits) is a backreference to a capture group earlier (that is, to  its  left)  in
       the pattern, provided there have been that many previous capture groups.

       However,  if the decimal number following the backslash is less than 8, it is always taken
       as a backreference, and causes an error only if there are not that many capture groups  in
       the  entire  pattern. In other words, the group that is referenced need not be to the left
       of the reference for numbers less than 8. A "forward backreference" of this type can  make
       sense  when  a  repetition  is  involved and the group to the right has participated in an
       earlier iteration.

       It is not possible to have a numerical "forward backreference" to a group whose number  is
       8  or  more using this syntax because a sequence such as \50 is interpreted as a character
       defined in octal. See the subsection entitled "Non-printing characters" above for  further
       details of the handling of digits following a backslash. Other forms of backreferencing do
       not suffer from this restriction. In particular, there is no problem  when  named  capture
       groups are used (see below).

       Another  way of avoiding the ambiguity inherent in the use of digits following a backslash
       is to use the \g escape sequence. This escape must be followed by  a  signed  or  unsigned
       number, optionally enclosed in braces. These examples are all identical:

         (ring), \1
         (ring), \g1
         (ring), \g{1}

       An  unsigned  number specifies an absolute reference without the ambiguity that is present
       in the older syntax. It is also useful when literal digits follow the reference. A  signed
       number is a relative reference. Consider this example:

         (abc(def)ghi)\g{-1}

       The  sequence  \g{-1} is a reference to the most recently started capture group before \g,
       that is, is it equivalent to \2 in this example. Similarly, \g{-2} would be equivalent  to
       \1.  The  use of relative references can be helpful in long patterns, and also in patterns
       that are created by joining together fragments that contain references within themselves.

       The sequence \g{+1} is a reference to  the  next  capture  group.  This  kind  of  forward
       reference  can  be  useful  in patterns that repeat. Perl does not support the use of + in
       this way.

       A backreference matches whatever actually most recently matched the capture group  in  the
       current subject string, rather than anything at all that matches the group (see "Groups as
       subroutines" below for a way of doing that). So the pattern

         (sens|respons)e and \1ibility

       matches "sense and sensibility" and "response and  responsibility",  but  not  "sense  and
       responsibility".  If  caseful  matching  is in force at the time of the backreference, the
       case of letters is relevant. For example,

         ((?i)rah)\s+\1

       matches "rah rah" and "RAH RAH", but not "RAH rah", even though the original capture group
       is matched caselessly.

       There  are  several  different ways of writing backreferences to named capture groups. The
       .NET syntax \k{name} and the Perl syntax \k<name> or \k'name' are  supported,  as  is  the
       Python syntax (?P=name). Perl 5.10's unified backreference syntax, in which \g can be used
       for both numeric and named references, is also  supported.  We  could  rewrite  the  above
       example in any of the following ways:

         (?<p1>(?i)rah)\s+\k<p1>
         (?'p1'(?i)rah)\s+\k{p1}
         (?P<p1>(?i)rah)\s+(?P=p1)
         (?<p1>(?i)rah)\s+\g{p1}

       A  capture  group that is referenced by name may appear in the pattern before or after the
       reference.

       There may be more than one backreference to the same group. If a group  has  not  actually
       been used in a particular match, backreferences to it always fail by default. For example,
       the pattern

         (a|(bc))\2

       always  fails  if  it  starts  to  match  "a"  rather   than   "bc".   However,   if   the
       PCRE2_MATCH_UNSET_BACKREF option is set at compile time, a backreference to an unset value
       matches an empty string.

       Because there may be many capture groups in a pattern, all digits  following  a  backslash
       are  taken  as  part  of a potential backreference number. If the pattern continues with a
       digit character, some delimiter must be  used  to  terminate  the  backreference.  If  the
       PCRE2_EXTENDED  or  PCRE2_EXTENDED_MORE option is set, this can be white space. Otherwise,
       the \g{} syntax or an empty comment (see "Comments" below) can be used.

   Recursive backreferences

       A backreference that occurs inside the group to which it refers fails when  the  group  is
       first  used,  so, for example, (a\1) never matches. However, such references can be useful
       inside repeated groups. For example, the pattern

         (a|b\1)+

       matches any number of "a"s and also "aba", "ababbaa" etc. At each iteration of the  group,
       the backreference matches the character string corresponding to the previous iteration. In
       order for this to work, the pattern must be such that the first iteration does not need to
       match  the  backreference. This can be done using alternation, as in the example above, or
       by a quantifier with a minimum of zero.

       For versions of PCRE2 less than 10.25, backreferences of this type used to cause the group
       that they reference to be treated as an atomic group.  This restriction no longer applies,
       and backtracking into such groups can occur as normal.

ASSERTIONS


       An assertion is a test on the characters following or preceding the current matching point
       that  does  not consume any characters. The simple assertions coded as \b, \B, \A, \G, \Z,
       \z, ^ and $ are described above.

       More complicated assertions are coded as parenthesized groups. There are two kinds:  those
       that  look ahead of the current position in the subject string, and those that look behind
       it, and in each case an assertion may be positive (must match  for  the  assertion  to  be
       true)  or  negative  (must  not match for the assertion to be true). An assertion group is
       matched in the normal way, and if it is true, matching continues after it,  but  with  the
       matching  position  in  the  subject  string reset to what it was before the assertion was
       processed.

       The Perl-compatible lookaround assertions are atomic. If an assertion is true,  but  there
       is  a  subsequent  matching failure, there is no backtracking into the assertion. However,
       there are some cases where non-atomic assertions can be useful. PCRE2 has some support for
       these,  described  in the section entitled "Non-atomic assertions" below, but they are not
       Perl-compatible.

       A lookaround assertion may appear as the condition in a conditional group (see below).  In
       this  case,  the result of matching the assertion determines which branch of the condition
       is followed.

       Assertion groups are not capture groups. If an assertion contains  capture  groups  within
       it,  these  are  counted  for  the  purposes  of numbering the capture groups in the whole
       pattern. Within each branch of an assertion, locally captured substrings may be referenced
       in  the usual way. For example, a sequence such as (.)\g{-1} can be used to check that two
       adjacent characters are the same.

       When a branch within an assertion fails to match, any substrings that  were  captured  are
       discarded  (as  happens with any pattern branch that fails to match). A negative assertion
       is true only when all its branches fail to match; this means that no  captured  substrings
       are  ever  retained  after  a  successful negative assertion. When an assertion contains a
       matching branch, what happens depends on the type of assertion.

       For a positive assertion, internally captured substrings  in  the  successful  branch  are
       retained,  and  matching  continues  with the next pattern item after the assertion. For a
       negative assertion, a matching branch means that the assertion is not  true.  If  such  an
       assertion  is  being  used  as  a  condition  in a conditional group (see below), captured
       substrings are retained, because matching continues with the "no" branch of the condition.
       For  other failing negative assertions, control passes to the previous backtracking point,
       thus discarding any captured strings within the assertion.

       Most assertion groups may be repeated; though it makes no sense to assert the  same  thing
       several  times,  the  side  effect of capturing in positive assertions may occasionally be
       useful. However, an assertion that forms the condition for a conditional group may not  be
       quantified.  PCRE2  used  to restrict the repetition of assertions, but from release 10.35
       the only restriction is that an unlimited maximum repetition is changed  to  be  one  more
       than the minimum. For example, {3,} is treated as {3,4}.

   Alphabetic assertion names

       Traditionally,  symbolic  sequences  such  as  (?=  and  (?<=  have  been  used to specify
       lookaround assertions. Perl 5.28  introduced  some  experimental  alphabetic  alternatives
       which  might  be  easier  to  remember.  They  all start with (* instead of (? and must be
       written using lower case letters. PCRE2 supports the following synonyms:

         (*positive_lookahead:  or (*pla: is the same as (?=
         (*negative_lookahead:  or (*nla: is the same as (?!
         (*positive_lookbehind: or (*plb: is the same as (?<=
         (*negative_lookbehind: or (*nlb: is the same as (?<!

       For example, (*pla:foo) is the same assertion as (?=foo). In the following  sections,  the
       various assertions are described using the original symbolic forms.

   Lookahead assertions

       Lookahead  assertions  start  with  (?=  for  positive  assertions  and  (?!  for negative
       assertions. For example,

         \w+(?=;)

       matches a word followed by a semicolon, but does not include the semicolon in  the  match,
       and

         foo(?!bar)

       matches  any  occurrence  of "foo" that is not followed by "bar". Note that the apparently
       similar pattern

         (?!foo)bar

       does not find an occurrence of "bar" that is preceded by something other  than  "foo";  it
       finds  any  occurrence  of  "bar" whatsoever, because the assertion (?!foo) is always true
       when the next three characters are "bar". A lookbehind assertion is needed to achieve  the
       other effect.

       If  you  want  to force a matching failure at some point in a pattern, the most convenient
       way to do it is with (?!) because an empty string always matches,  so  an  assertion  that
       requires  there not to be an empty string must always fail.  The backtracking control verb
       (*FAIL) or (*F) is a synonym for (?!).

   Lookbehind assertions

       Lookbehind assertions start with (?<=  for  positive  assertions  and  (?<!  for  negative
       assertions. For example,

         (?<!foo)bar

       does  find  an  occurrence  of  "bar"  that  is  not  preceded by "foo". The contents of a
       lookbehind assertion are restricted such that all the strings it matches must have a fixed
       length. However, if there are several top-level alternatives, they do not all have to have
       the same fixed length. Thus

         (?<=bullock|donkey)

       is permitted, but

         (?<!dogs?|cats?)

       causes an error at  compile  time.  Branches  that  match  different  length  strings  are
       permitted  only  at the top level of a lookbehind assertion. This is an extension compared
       with Perl, which requires all branches to match the same length of  string.  An  assertion
       such as

         (?<=ab(c|de))

       is not permitted, because its single top-level branch can match two different lengths, but
       it is acceptable to PCRE2 if rewritten to use two top-level branches:

         (?<=abc|abde)

       In some cases, the escape sequence \K (see above) can be  used  instead  of  a  lookbehind
       assertion to get round the fixed-length restriction.

       The  implementation of lookbehind assertions is, for each alternative, to temporarily move
       the current position back by the fixed  length  and  then  try  to  match.  If  there  are
       insufficient characters before the current position, the assertion fails.

       In UTF-8 and UTF-16 modes, PCRE2 does not allow the \C escape (which matches a single code
       unit even in a UTF  mode)  to  appear  in  lookbehind  assertions,  because  it  makes  it
       impossible  to  calculate  the  length of the lookbehind. The \X and \R escapes, which can
       match different numbers of code units, are never permitted in lookbehinds.

       "Subroutine" calls (see below) such as (?2) or (?&X) are permitted in lookbehinds, as long
       as  the called capture group matches a fixed-length string. However, recursion, that is, a
       "subroutine" call into a group that is already active, is not supported.

       Perl does not support backreferences in lookbehinds. PCRE2 does support them, but only  if
       certain  conditions  are  met. The PCRE2_MATCH_UNSET_BACKREF option must not be set, there
       must be no use of (?| in the pattern (it creates duplicate  group  numbers),  and  if  the
       backreference  is  by  name, the name must be unique. Of course, the referenced group must
       itself match a fixed length substring. The following pattern matches words  containing  at
       least two characters that begin and end with the same character:

          \b(\w)\w++(?<=\1)

       Possessive  quantifiers  can  be used in conjunction with lookbehind assertions to specify
       efficient matching of fixed-length strings at the  end  of  subject  strings.  Consider  a
       simple pattern such as

         abcd$

       when  applied to a long string that does not match. Because matching proceeds from left to
       right, PCRE2 will look for each "a" in the subject and then see if  what  follows  matches
       the rest of the pattern. If the pattern is specified as

         ^.*abcd$

       the  initial  .* matches the entire string at first, but when this fails (because there is
       no following "a"), it backtracks to match all but the last character,  then  all  but  the
       last  two  characters,  and so on. Once again the search for "a" covers the entire string,
       from right to left, so we are no better off. However, if the pattern is written as

         ^.*+(?<=abcd)

       there can be no backtracking for the .*+ item because of the possessive quantifier; it can
       match  only  the  entire string. The subsequent lookbehind assertion does a single test on
       the last four characters. If it fails, the match fails immediately. For long strings, this
       approach makes a significant difference to the processing time.

   Using multiple assertions

       Several assertions (of any sort) may occur in succession. For example,

         (?<=\d{3})(?<!999)foo

       matches  "foo"  preceded  by  three  digits  that  are  not "999". Notice that each of the
       assertions is applied independently at the same point in the subject string.  First  there
       is  a  check  that the previous three characters are all digits, and then there is a check
       that the same three characters are not "999".  This pattern does not match "foo"  preceded
       by  six  characters,  the  first  of  which are digits and the last three of which are not
       "999". For example, it doesn't match "123abcfoo". A pattern to do that is

         (?<=\d{3}...)(?<!999)foo

       This time the first assertion looks at the preceding six  characters,  checking  that  the
       first  three  are  digits,  and  then the second assertion checks that the preceding three
       characters are not "999".

       Assertions can be nested in any combination. For example,

         (?<=(?<!foo)bar)baz

       matches an occurrence of "baz" that is preceded by "bar" which in turn is not preceded  by
       "foo", while

         (?<=\d{3}(?!999)...)foo

       is  another  pattern  that matches "foo" preceded by three digits and any three characters
       that are not "999".

NON-ATOMIC ASSERTIONS


       The traditional Perl-compatible lookaround assertions are atomic. That is, if an assertion
       is  true,  but  there  is a subsequent matching failure, there is no backtracking into the
       assertion. However, there are some cases  where  non-atomic  positive  assertions  can  be
       useful. PCRE2 provides these using the following syntax:

         (*non_atomic_positive_lookahead:  or (*napla: or (?*
         (*non_atomic_positive_lookbehind: or (*naplb: or (?<*

       Consider  the problem of finding the right-most word in a string that also appears earlier
       in the string, that is, it must appear at least twice in total.  This pattern returns  the
       required result as captured substring 1:

         ^(?x)(*napla: .* \b(\w++)) (?> .*? \b\1\b ){2}

       For  a  subject  such  as "word1 word2 word3 word2 word3 word4" the result is "word3". How
       does it work? At the start, ^(?x) anchors the pattern  and  sets  the  "x"  option,  which
       causes  white  space (introduced for readability) to be ignored. Inside the assertion, the
       greedy .* at first consumes the entire string, but then has to backtrack until the rest of
       the  assertion  can  match  a word, which is captured by group 1. In other words, when the
       assertion first succeeds, it captures the right-most word in the string.

       The current matching point is then reset to the start of the subject, and the rest of  the
       pattern  match  checks  for two occurrences of the captured word, using an ungreedy .*? to
       scan from the left. If this succeeds, we are done, but if the last word in the string does
       not  occur  twice, this part of the pattern fails. If a traditional atomic lookhead (?= or
       (*pla: had been used, the assertion could not be re-entered, and  the  whole  match  would
       fail. The pattern would succeed only if the very last word in the subject was found twice.

       Using  a non-atomic lookahead, however, means that when the last word does not occur twice
       in the string, the lookahead can backtrack and find the second-last word, and so on, until
       either the match succeeds, or all words have been tested.

       Two conditions must be met for a non-atomic assertion to be useful: the contents of one or
       more capturing groups must change after a backtrack into the assertion, and there must  be
       a backreference to a changed group later in the pattern. If this is not the case, the rest
       of the pattern match fails exactly as before because nothing has changed, so using a  non-
       atomic assertion just wastes resources.

       There  is  one  exception  to  backtracking  into  a non-atomic assertion. If an (*ACCEPT)
       control verb is triggered, the assertion succeeds atomically. That is, a subsequent  match
       failure cannot backtrack into the assertion.

       Non-atomic   assertions   are   not   supported   by  the  alternative  matching  function
       pcre2_dfa_match(). They are supported by JIT, but only if they do not contain any  control
       verbs  such as (*ACCEPT). (This may change in future). Note that assertions that appear as
       conditions for conditional groups (see below) must be atomic.

SCRIPT RUNS


       In concept, a script run is a sequence of characters that are all from  the  same  Unicode
       script  such  as Latin or Greek. However, because some scripts are commonly used together,
       and because some diacritical and other marks are used with multiple  scripts,  it  is  not
       that  simple.  There  is  a  full  description of the rules that PCRE2 uses in the section
       entitled "Script Runs" in the pcre2unicode documentation.

       If part of a pattern is enclosed between (*script_run: or (*sr: and a closing parenthesis,
       it  fails  if  the  sequence  of  characters that it matches are not a script run. After a
       failure, normal backtracking occurs. Script runs can be used to  detect  spoofing  attacks
       using  characters  that  look  the  same,  but  are  from  different  scripts.  The string
       "paypal.com" is an infamous example, where the letters could be a  mixture  of  Latin  and
       Cyrillic.  This  pattern  ensures  that the matched characters in a sequence of non-spaces
       that follow white space are a script run:

         \s+(*sr:\S+)

       To be sure that they are all from the Latin script (for example), a lookahead can be used:

         \s+(?=\p{Latin})(*sr:\S+)

       This works as long as the first character is expected to be a character  in  that  script,
       and  not  (for  example) punctuation, which is allowed with any script. If this is not the
       case, a more creative lookahead is needed. For example, if digits,  underscore,  and  dots
       are permitted at the start:

         \s+(?=[0-9_.]*\p{Latin})(*sr:\S+)

       In  many  cases,  backtracking  into  a  script run pattern fragment is not desirable. The
       script run can employ  an  atomic  group  to  prevent  this.  Because  this  is  a  common
       requirement, a shorthand notation is provided by (*atomic_script_run: or (*asr:

         (*asr:...) is the same as (*sr:(?>...))

       Note  that the atomic group is inside the script run. Putting it outside would not prevent
       backtracking into the script run pattern.

       Support for script runs is not available if PCRE2 is compiled without Unicode  support.  A
       compile-time error is given if any of the above constructs is encountered. Script runs are
       not supported by the alternate matching function, pcre2_dfa_match() because they  use  the
       same mechanism as capturing parentheses.

       Warning:  The  (*ACCEPT)  control  verb (see below) should not be used within a script run
       group, because it causes an immediate exit  from  the  group,  bypassing  the  script  run
       checking.

CONDITIONAL GROUPS


       It  is  possible to cause the matching process to obey a pattern fragment conditionally or
       to choose between two alternative fragments, depending on the result of an  assertion,  or
       whether  a  specific  capture  group  has  already been matched. The two possible forms of
       conditional group are:

         (?(condition)yes-pattern)
         (?(condition)yes-pattern|no-pattern)

       If the condition is satisfied, the yes-pattern  is  used;  otherwise  the  no-pattern  (if
       present)  is  used.  An  absent  no-pattern  is  equivalent  to an empty string (it always
       matches). If there are more than two alternatives  in  the  group,  a  compile-time  error
       occurs.  Each  of  the  two  alternatives  may  itself  contain nested groups of any form,
       including conditional groups; the restriction to two  alternatives  applies  only  at  the
       level  of the condition itself. This pattern fragment is an example where the alternatives
       are complex:

         (?(1) (A|B|C) | (D | (?(2)E|F) | E) )

       There are five kinds of condition: references to capture groups, references to  recursion,
       two pseudo-conditions called DEFINE and VERSION, and assertions.

   Checking for a used capture group by number

       If  the  text  between  the parentheses consists of a sequence of digits, the condition is
       true if a capture group of that number has previously matched. If there is more  than  one
       capture  group  with  the  same  number  (see  the  earlier  section about duplicate group
       numbers), the condition is true if any of them have matched. An alternative notation is to
       precede  the  digits with a plus or minus sign. In this case, the group number is relative
       rather than absolute. The most recently opened capture group can be referenced by  (?(-1),
       the next most recent by (?(-2), and so on. Inside loops it can also make sense to refer to
       subsequent groups. The next capture group can be referenced as (?(+1),  and  so  on.  (The
       value zero in any of these forms is not used; it provokes a compile-time error.)

       Consider the following pattern, which contains non-significant white space to make it more
       readable (assume the PCRE2_EXTENDED option) and to divide it into three parts for ease  of
       discussion:

         ( \( )?    [^()]+    (?(1) \) )

       The  first part matches an optional opening parenthesis, and if that character is present,
       sets it as the first captured substring. The second part matches one  or  more  characters
       that  are not parentheses. The third part is a conditional group that tests whether or not
       the first capture group matched. If it did, that is, if subject started  with  an  opening
       parenthesis,  the  condition  is  true,  and  so the yes-pattern is executed and a closing
       parenthesis is required. Otherwise, since no-pattern is not present, the conditional group
       matches  nothing.  In  other  words,  this  pattern matches a sequence of non-parentheses,
       optionally enclosed in parentheses.

       If you were embedding this pattern in a larger one, you could use a relative reference:

         ...other stuff... ( \( )?    [^()]+    (?(-1) \) ) ...

       This makes the fragment independent of the parentheses in the larger pattern.

   Checking for a used capture group by name

       Perl uses the syntax (?(<name>)...) or (?('name')...) to test for a used capture group  by
       name.  For  compatibility  with  earlier versions of PCRE1, which had this facility before
       Perl, the syntax (?(name)...) is also recognized.  Note, however, that  undelimited  names
       consisting  of  the letter R followed by digits are ambiguous (see the following section).
       Rewriting the above example to use a named group gives this:

         (?<OPEN> \( )?    [^()]+    (?(<OPEN>) \) )

       If the name used in a condition of this kind is a duplicate, the test is  applied  to  all
       groups of the same name, and is true if any one of them has matched.

   Checking for pattern recursion

       "Recursion"  in this sense refers to any subroutine-like call from one part of the pattern
       to another, whether or not it is actually recursive. See the sections entitled  "Recursive
       patterns" and "Groups as subroutines" below for details of recursion and subroutine calls.

       If  a  condition  is  the  string  (R), and there is no capture group with the name R, the
       condition is true if matching is currently in a recursion or subroutine call to the  whole
       pattern  or  any  capture group. If digits follow the letter R, and there is no group with
       that name, the condition is true if the most recent call is into a group  with  the  given
       number,  which  must  exist  somewhere in the overall pattern. This is a contrived example
       that is equivalent to a+b:

         ((?(R1)a+|(?1)b))

       However, in both cases, if there is a capture group with a matching  name,  the  condition
       tests  for  its  being  set,  as  described  in  the section above, instead of testing for
       recursion. For example, creating a group with the name R1 by adding (?<R1>) to  the  above
       pattern completely changes its meaning.

       If a name preceded by ampersand follows the letter R, for example:

         (?(R&name)...)

       the  condition  is  true  if the most recent recursion is into a group of that name (which
       must exist within the pattern).

       This condition does not check the entire recursion stack. It tests only the current level.
       If  the  name  used in a condition of this kind is a duplicate, the test is applied to all
       groups of the same name, and is true if any one of them is the most recent recursion.

       At "top level", all these recursion test conditions are false.

   Defining capture groups for use by reference only

       If the condition is the string (DEFINE), the condition is always false, even if there is a
       group with the name DEFINE. In this case, there may be only one alternative in the rest of
       the conditional group. It is always skipped if control reaches this point in the  pattern;
       the  idea  of  DEFINE  is that it can be used to define subroutines that can be referenced
       from elsewhere. (The use of subroutines is described below.) For  example,  a  pattern  to
       match  an  IPv4  address such as "192.168.23.245" could be written like this (ignore white
       space and line breaks):

         (?(DEFINE) (?<byte> 2[0-4]\d | 25[0-5] | 1\d\d | [1-9]?\d) )
         \b (?&byte) (\.(?&byte)){3} \b

       The first part of the pattern is a DEFINE group inside which another group named "byte" is
       defined. This matches an individual component of an IPv4 address (a number less than 256).
       When matching takes place, this part of the pattern is skipped because DEFINE acts like  a
       false  condition.  The rest of the pattern uses references to the named group to match the
       four dot-separated components of an IPv4 address, insisting on a  word  boundary  at  each
       end.

   Checking the PCRE2 version

       Programs  that  link  with a PCRE2 library can check the version by calling pcre2_config()
       with appropriate arguments.  Users  of  applications  that  do  not  have  access  to  the
       underlying  code cannot do this. A special "condition" called VERSION exists to allow such
       users to discover which version of PCRE2 they are dealing with by using this condition  to
       match  a  string  such  as  "yesno".  VERSION must be followed either by "=" or ">=" and a
       version number.  For example:

         (?(VERSION>=10.4)yes|no)

       This pattern matches "yes" if the PCRE2 version is greater  or  equal  to  10.4,  or  "no"
       otherwise. The fractional part of the version number may not contain more than two digits.

   Assertion conditions

       If the condition is not in any of the above formats, it must be a parenthesized assertion.
       This may be a positive or negative lookahead or lookbehind assertion. However, it must  be
       a traditional atomic assertion, not one of the PCRE2-specific non-atomic assertions.

       Consider  this  pattern,  again  containing  non-significant white space, and with the two
       alternatives on the second line:

         (?(?=[^a-z]*[a-z])
         \d{2}-[a-z]{3}-\d{2}  |  \d{2}-\d{2}-\d{2} )

       The condition is a positive lookahead assertion that matches an optional sequence of  non-
       letters  followed  by  a letter. In other words, it tests for the presence of at least one
       letter in the subject. If a letter is found, the subject  is  matched  against  the  first
       alternative;  otherwise  it is matched against the second. This pattern matches strings in
       one of the two forms dd-aaa-dd or dd-dd-dd, where aaa are letters and dd are digits.

       When an assertion that is a condition contains capture groups, any capturing  that  occurs
       in  a  matching  branch is retained afterwards, for both positive and negative assertions,
       because matching always continues after the  assertion,  whether  it  succeeds  or  fails.
       (Compare  non-conditional  assertions,  for  which captures are retained only for positive
       assertions that succeed.)

COMMENTS


       There are two ways of including comments in patterns that are processed by PCRE2. In  both
       cases, the start of the comment must not be in a character class, nor in the middle of any
       other sequence of related characters such as (?: or a group name or number. The characters
       that make up a comment play no part in the pattern matching.

       The  sequence  (?#  marks  the  start  of  a comment that continues up to the next closing
       parenthesis.  Nested  parentheses  are   not   permitted.   If   the   PCRE2_EXTENDED   or
       PCRE2_EXTENDED_MORE  option  is  set,  an unescaped # character also introduces a comment,
       which in this case continues to immediately after the next newline character or  character
       sequence  in the pattern. Which characters are interpreted as newlines is controlled by an
       option passed to the compiling function or by a special  sequence  at  the  start  of  the
       pattern,  as  described in the section entitled "Newline conventions" above. Note that the
       end of this type of comment is a literal newline sequence in the pattern; escape sequences
       that  happen  to represent a newline do not count. For example, consider this pattern when
       PCRE2_EXTENDED is set, and the default newline convention (a single linefeed character) is
       in force:

         abc #comment \n still comment

       On encountering the # character, pcre2_compile() skips along, looking for a newline in the
       pattern. The sequence \n is still literal at this stage, so  it  does  not  terminate  the
       comment. Only an actual character with the code value 0x0a (the default newline) does so.

RECURSIVE PATTERNS


       Consider  the  problem  of matching a string in parentheses, allowing for unlimited nested
       parentheses. Without the use of recursion, the best that can be done is to use  a  pattern
       that  matches up to some fixed depth of nesting. It is not possible to handle an arbitrary
       nesting depth.

       For some time, Perl has provided a facility that allows  regular  expressions  to  recurse
       (amongst  other  things). It does this by interpolating Perl code in the expression at run
       time, and the code can  refer  to  the  expression  itself.  A  Perl  pattern  using  code
       interpolation to solve the parentheses problem can be created like this:

         $re = qr{\( (?: (?>[^()]+) | (?p{$re}) )* \)}x;

       The (?p{...}) item interpolates Perl code at run time, and in this case refers recursively
       to the pattern in which it appears.

       Obviously, PCRE2 cannot support the interpolation  of  Perl  code.  Instead,  it  supports
       special  syntax for recursion of the entire pattern, and also for individual capture group
       recursion. After its introduction  in  PCRE1  and  Python,  this  kind  of  recursion  was
       subsequently introduced into Perl at release 5.10.

       A  special  item  that consists of (? followed by a number greater than zero and a closing
       parenthesis is a recursive subroutine call of the  capture  group  of  the  given  number,
       provided that it occurs inside that group. (If not, it is a non-recursive subroutine call,
       which is described in the next section.) The special item (?R) or (?0) is a recursive call
       of the entire regular expression.

       This PCRE2 pattern solves the nested parentheses problem (assume the PCRE2_EXTENDED option
       is set so that white space is ignored):

         \( ( [^()]++ | (?R) )* \)

       First it matches an opening parenthesis. Then it matches any number  of  substrings  which
       can  either  be  a sequence of non-parentheses, or a recursive match of the pattern itself
       (that is, a correctly parenthesized substring).  Finally there is a  closing  parenthesis.
       Note  the  use  of  a  possessive  quantifier to avoid backtracking into sequences of non-
       parentheses.

       If this were part of a larger pattern, you would not want to recurse the  entire  pattern,
       so instead you could use this:

         ( \( ( [^()]++ | (?1) )* \) )

       We  have  put  the  pattern  into  parentheses,  and caused the recursion to refer to them
       instead of the whole pattern.

       In a larger pattern, keeping track of parenthesis numbers can  be  tricky.  This  is  made
       easier  by  the  use  of relative references. Instead of (?1) in the pattern above you can
       write (?-2) to refer  to  the  second  most  recently  opened  parentheses  preceding  the
       recursion.  In  other words, a negative number counts capturing parentheses leftwards from
       the point at which it is encountered.

       Be aware however, that if duplicate capture group numbers are in use, relative  references
       refer to the earliest group with the appropriate number. Consider, for example:

         (?|(a)|(b)) (c) (?-2)

       The  first  two capture groups (a) and (b) are both numbered 1, and group (c) is number 2.
       When the reference (?-2) is encountered, the second most recently opened  parentheses  has
       the  number  1,  but  it  is  the  first such group (the (a) group) to which the recursion
       refers. This would be the same if an absolute reference (?1) was  used.  In  other  words,
       relative references are just a shorthand for computing a group number.

       It  is  also possible to refer to subsequent capture groups, by writing references such as
       (?+2). However, these cannot  be  recursive  because  the  reference  is  not  inside  the
       parentheses  that  are  referenced.  They  are  always  non-recursive subroutine calls, as
       described in the next section.

       An alternative approach is to use named parentheses. The Perl syntax for this is (?&name);
       PCRE1's  earlier syntax (?P>name) is also supported. We could rewrite the above example as
       follows:

         (?<pn> \( ( [^()]++ | (?&pn) )* \) )

       If there is more than one group with the same name, the earliest one is used.

       The example pattern that we have been looking at contains nested unlimited repeats, and so
       the  use  of  a possessive quantifier for matching strings of non-parentheses is important
       when applying the pattern to strings that do not match. For example, when this pattern  is
       applied to

         (aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa()

       it  yields  "no match" quickly. However, if a possessive quantifier is not used, the match
       runs for a very long time indeed because there are so many different  ways  the  +  and  *
       repeats  can  carve  up  the  subject,  and  all  have  to be tested before failure can be
       reported.

       At the end of a match, the values of capturing parentheses are those  from  the  outermost
       level.  If  you  want  to  obtain intermediate values, a callout function can be used (see
       below and the pcre2callout documentation). If the pattern above is matched against

         (ab(cd)ef)

       the value for the inner capturing parentheses (numbered 2) is  "ef",  which  is  the  last
       value  taken  on at the top level. If a capture group is not matched at the top level, its
       final captured value is unset, even if it was (temporarily) set at a deeper  level  during
       the matching process.

       Do  not confuse the (?R) item with the condition (R), which tests for recursion.  Consider
       this pattern, which matches text in angle brackets, allowing for arbitrary  nesting.  Only
       digits  are  allowed  in nested brackets (that is, when recursing), whereas any characters
       are permitted at the outer level.

         < (?: (?(R) \d++  | [^<>]*+) | (?R)) * >

       In this  pattern,  (?(R)  is  the  start  of  a  conditional  group,  with  two  different
       alternatives  for  the  recursive  and  non-recursive  cases.  The (?R) item is the actual
       recursive call.

   Differences in recursion processing between PCRE2 and Perl

       Some former differences between PCRE2 and Perl no longer exist.

       Before release 10.30, recursion processing in PCRE2 differed from Perl in that a recursive
       subroutine  call  was always treated as an atomic group. That is, once it had matched some
       of the subject string, it was never re-entered, even if it contained untried  alternatives
       and  there was a subsequent matching failure. (Historical note: PCRE implemented recursion
       before Perl did.)

       Starting with release 10.30, recursive subroutine calls are no longer treated  as  atomic.
       That  is, they can be re-entered to try unused alternatives if there is a matching failure
       later in the pattern. This is now compatible with the  way  Perl  works.  If  you  want  a
       subroutine call to be atomic, you must explicitly enclose it in an atomic group.

       Supporting backtracking into recursions simplifies certain types of recursive pattern. For
       example, this pattern matches palindromic strings:

         ^((.)(?1)\2|.?)$

       The second branch in the group matches a single central character in the  palindrome  when
       there  are  an  odd  number  of  characters,  or  nothing when there are an even number of
       characters, but in order to work it has to be able to try the second case when the rest of
       the pattern match fails. If you want to match typical palindromic phrases, the pattern has
       to ignore all non-word characters, which can be done like this:

         ^\W*+((.)\W*+(?1)\W*+\2|\W*+.?)\W*+$

       If run with the PCRE2_CASELESS option, this pattern matches phrases  such  as  "A  man,  a
       plan,  a  canal:  Panama!".  Note  the  use  of  the  possessive  quantifier  *+  to avoid
       backtracking into sequences of non-word characters. Without this, PCRE2 takes a great deal
       longer (ten times or more) to match typical phrases, and Perl takes so long that you think
       it has gone into a loop.

       Another way in which PCRE2 and Perl used to differ in their recursion processing is in the
       handling of captured values. Formerly in Perl, when a group was called recursively or as a
       subroutine (see the next section), it had no access  to  any  values  that  were  captured
       outside  the  recursion,  whereas  in  PCRE2 these values can be referenced. Consider this
       pattern:

         ^(.)(\1|a(?2))

       This pattern matches "bab". The first capturing parentheses match "b", then in the  second
       group,  when  the  backreference \1 fails to match "b", the second alternative matches "a"
       and then recurses. In the recursion, \1  does  now  match  "b"  and  so  the  whole  match
       succeeds.  This  match  used to fail in Perl, but in later versions (I tried 5.024) it now
       works.

GROUPS AS SUBROUTINES


       If the syntax for a recursive group call (either by number or by name) is used outside the
       parentheses  to  which  it  refers,  it  operates a bit like a subroutine in a programming
       language. More accurately, PCRE2 treats the referenced group as an independent  subpattern
       which  it tries to match at the current matching position. The called group may be defined
       before or after the reference. A numbered reference can be absolute  or  relative,  as  in
       these examples:

         (...(absolute)...)...(?2)...
         (...(relative)...)...(?-1)...
         (...(?+1)...(relative)...

       An earlier example pointed out that the pattern

         (sens|respons)e and \1ibility

       matches  "sense  and  sensibility"  and  "response and responsibility", but not "sense and
       responsibility". If instead the pattern

         (sens|respons)e and (?1)ibility

       is used, it does match "sense and responsibility"  as  well  as  the  other  two  strings.
       Another example is given in the discussion of DEFINE above.

       Like  recursions, subroutine calls used to be treated as atomic, but this changed at PCRE2
       release 10.30, so backtracking into subroutine calls can now occur. However, any capturing
       parentheses  that  are  set  during  the  subroutine  call revert to their previous values
       afterwards.

       Processing options such as case-independence are fixed when a group is defined, so  if  it
       is  used as a subroutine, such options cannot be changed for different calls. For example,
       consider this pattern:

         (abc)(?i:(?-1))

       It matches "abcabc". It does not match "abcABC" because the change  of  processing  option
       does not affect the called group.

       The  behaviour  of  backtracking  control  verbs  in  groups when called as subroutines is
       described in the section entitled "Backtracking verbs in subroutines" below.

ONIGURUMA SUBROUTINE SYNTAX


       For compatibility with Oniguruma, the non-Perl syntax \g followed by a name  or  a  number
       enclosed either in angle brackets or single quotes, is an alternative syntax for calling a
       group as a subroutine, possibly recursively. Here are two  of  the  examples  used  above,
       rewritten using this syntax:

         (?<pn> \( ( (?>[^()]+) | \g<pn> )* \) )
         (sens|respons)e and \g'1'ibility

       PCRE2  supports  an  extension  to Oniguruma: if a number is preceded by a plus or a minus
       sign it is taken as a relative reference. For example:

         (abc)(?i:\g<-1>)

       Note that \g{...} (Perl syntax) and \g<...> (Oniguruma syntax)  are  not  synonymous.  The
       former is a backreference; the latter is a subroutine call.

CALLOUTS


       Perl  has  a  feature whereby using the sequence (?{...}) causes arbitrary Perl code to be
       obeyed in the middle of matching a regular expression. This  makes  it  possible,  amongst
       other things, to extract different substrings that match the same pair of parentheses when
       there is a repetition.

       PCRE2 provides a similar feature, but of course it cannot obey arbitrary  Perl  code.  The
       feature  is called "callout". The caller of PCRE2 provides an external function by putting
       its entry point in a match  context  using  the  function  pcre2_set_callout(),  and  then
       passing that context to pcre2_match() or pcre2_dfa_match(). If no match context is passed,
       or if the callout entry point is set to NULL, callouts are disabled.

       Within a regular expression, (?C<arg>) indicates a point at which the external function is
       to  be  called.  There are two kinds of callout: those with a numerical argument and those
       with a string argument. (?C) on its own with no argument is treated as (?C0). A  numerical
       argument  allows  the  application  to  distinguish  between  different  callouts.  String
       arguments were added for release 10.20 to make it possible for script languages  that  use
       PCRE2 to embed short scripts within patterns in a similar way to Perl.

       During  matching,  when PCRE2 reaches a callout point, the external function is called. It
       is provided with the number or string  argument  of  the  callout,  the  position  in  the
       pattern,  and  one  item of data that is also set in the match block. The callout function
       may cause matching to proceed, to backtrack, or to fail.

       By default, PCRE2 implements a number of optimizations at matching  time,  and  one  side-
       effect  is  that  sometimes  callouts  are  skipped.  If you need all possible callouts to
       happen, you need to set options that disable the  relevant  optimizations.  More  details,
       including a complete description of the programming interface to the callout function, are
       given in the pcre2callout documentation.

   Callouts with numerical arguments

       If you just want to have a means of identifying different callout  points,  put  a  number
       less than 256 after the letter C. For example, this pattern has two callout points:

         (?C1)abc(?C2)def

       If  the  PCRE2_AUTO_CALLOUT  flag  is  passed  to  pcre2_compile(), numerical callouts are
       automatically installed before each item in the pattern. They are  all  numbered  255.  If
       there is a conditional group in the pattern whose condition is an assertion, an additional
       callout is inserted just before the condition. An explicit callout may also be set at this
       position, as in this example:

         (?(?C9)(?=a)abc|def)

       Note that this applies only to assertion conditions, not to other types of condition.

   Callouts with string arguments

       A  delimited  string  may  be used instead of a number as a callout argument. The starting
       delimiter must be one of ` ' " ^ % # $ { and the ending  delimiter  is  the  same  as  the
       start,  except  for  {, where the ending delimiter is }. If the ending delimiter is needed
       within the string, it must be doubled. For example:

         (?C'ab ''c'' d')xyz(?C{any text})pqr

       The doubling is removed before the string is passed to the callout function.

BACKTRACKING CONTROL


       There are a number of special "Backtracking Control Verbs"  (to  use  Perl's  terminology)
       that  modify the behaviour of backtracking during matching. They are generally of the form
       (*VERB) or (*VERB:NAME). Some verbs take either form, and may behave differently depending
       on  whether  or  not  a  name argument is present. The names are not required to be unique
       within the pattern.

       By default, for compatibility with Perl, a name is any sequence of  characters  that  does
       not  include  a  closing  parenthesis. The name is not processed in any way, and it is not
       possible to include a closing parenthesis in the name.  This can be changed by setting the
       PCRE2_ALT_VERBNAMES option, but the result is no longer Perl-compatible.

       When PCRE2_ALT_VERBNAMES is set, backslash processing is applied to verb names and only an
       unescaped closing parenthesis terminates the name. However, the only backslash items  that
       are permitted are \Q, \E, and sequences such as \x{100} that define character code points.
       Character type escapes such as \d are faulted.

       A closing parenthesis can be included in a name either as \) or  between  \Q  and  \E.  In
       addition  to  backslash processing, if the PCRE2_EXTENDED or PCRE2_EXTENDED_MORE option is
       also set, unescaped whitespace in verb names is skipped, and  #-comments  are  recognized,
       exactly  as  in  the  rest  of the pattern.  PCRE2_EXTENDED and PCRE2_EXTENDED_MORE do not
       affect verb names unless PCRE2_ALT_VERBNAMES is also set.

       The maximum length of a name is 255 in the 8-bit library  and  65535  in  the  16-bit  and
       32-bit  libraries.  If  the name is empty, that is, if the closing parenthesis immediately
       follows the colon, the effect is as if the colon were not there. Any number of these verbs
       may occur in a pattern. Except for (*ACCEPT), they may not be quantified.

       Since  these verbs are specifically related to backtracking, most of them can be used only
       when the pattern is to be matched using the traditional matching  function,  because  that
       uses a backtracking algorithm. With the exception of (*FAIL), which behaves like a failing
       negative assertion, the backtracking control verbs cause an error if  encountered  by  the
       DFA matching function.

       The  behaviour of these verbs in repeated groups, assertions, and in capture groups called
       as subroutines (whether or not recursively) is documented below.

   Optimizations that affect backtracking verbs

       PCRE2 contains some optimizations that are used to  speed  up  matching  by  running  some
       checks  at the start of each match attempt. For example, it may know the minimum length of
       matching subject, or that a particular character  must  be  present.  When  one  of  these
       optimizations  bypasses  the running of a match, any included backtracking verbs will not,
       of course, be processed. You can suppress the start-of-match optimizations by setting  the
       PCRE2_NO_START_OPTIMIZE  option  when  calling pcre2_compile(), or by starting the pattern
       with (*NO_START_OPT). There is more discussion of this  option  in  the  section  entitled
       "Compiling a pattern" in the pcre2api documentation.

       Experiments  with  Perl  suggest  that  it  too has similar optimizations, and like PCRE2,
       turning them off can change the result of a match.

   Verbs that act immediately

       The following verbs act as soon as they are encountered.

          (*ACCEPT) or (*ACCEPT:NAME)

       This verb causes the match to end successfully, skipping the  remainder  of  the  pattern.
       However, when it is inside a capture group that is called as a subroutine, only that group
       is ended successfully. Matching then  continues  at  the  outer  level.  If  (*ACCEPT)  in
       triggered  in  a  positive assertion, the assertion succeeds; in a negative assertion, the
       assertion fails.

       If (*ACCEPT) is inside capturing parentheses, the data so far is captured. For example:

         A((?:A|B(*ACCEPT)|C)D)

       This matches "AB", "AAD", or "ACD"; when it matches "AB", "B" is  captured  by  the  outer
       parentheses.

       (*ACCEPT)  is  the  only  backtracking  verb  that  is allowed to be quantified because an
       ungreedy quantification with a minimum  of  zero  acts  only  when  a  backtrack  happens.
       Consider, for example,

         (A(*ACCEPT)??B)C

       where  A,  B,  and C may be complex expressions. After matching "A", the matcher processes
       "BC"; if that fails, causing a backtrack, (*ACCEPT) is triggered and the  match  succeeds.
       In  both  cases,  all  but  C  is  captured.  Whereas (*COMMIT) (see below) means "fail on
       backtrack", a repeated (*ACCEPT) of this type means "succeed on backtrack".

       Warning: (*ACCEPT) should not be used within a script run  group,  because  it  causes  an
       immediate exit from the group, bypassing the script run checking.

         (*FAIL) or (*FAIL:NAME)

       This  verb causes a matching failure, forcing backtracking to occur. It may be abbreviated
       to (*F). It is equivalent to (?!) but easier to read. The Perl documentation notes that it
       is  probably  useful  only  when combined with (?{}) or (??{}). Those are, of course, Perl
       features that are not present in PCRE2. The nearest equivalent is the callout feature,  as
       for example in this pattern:

         a+(?C)(*FAIL)

       A  match  with  the  string  "aaaa"  always  fails,  but  the callout is taken before each
       backtrack happens (in this example, 10 times).

       (*ACCEPT:NAME)  and  (*FAIL:NAME)   behave   the   same   as   (*MARK:NAME)(*ACCEPT)   and
       (*MARK:NAME)(*FAIL),  respectively,  that  is,  a (*MARK) is recorded just before the verb
       acts.

   Recording which path was taken

       There is one verb whose main purpose is to track how a match was  arrived  at,  though  it
       also  has  a  secondary  use  in  conjunction with advancing the match starting point (see
       (*SKIP) below).

         (*MARK:NAME) or (*:NAME)

       A name is always required with this verb. For all the other backtracking control verbs,  a
       NAME argument is optional.

       When  a match succeeds, the name of the last-encountered mark name on the matching path is
       passed back to the caller as described in the section entitled  "Other  information  about
       the  match"  in  the  pcre2api documentation. This applies to all instances of (*MARK) and
       other verbs, including those inside assertions  and  atomic  groups.  However,  there  are
       differences  in  those cases when (*MARK) is used in conjunction with (*SKIP) as described
       below.

       The mark name that was last encountered on the  matching  path  is  passed  back.  A  verb
       without  a  NAME  argument  is  ignored  for this purpose. Here is an example of pcre2test
       output, where the "mark" modifier requests the retrieval and outputting of (*MARK) data:

           re> /X(*MARK:A)Y|X(*MARK:B)Z/mark
         data> XY
          0: XY
         MK: A
         XZ
          0: XZ
         MK: B

       The (*MARK) name is tagged with "MK:" in this output, and in  this  example  it  indicates
       which  of  the  two  alternatives  matched. This is a more efficient way of obtaining this
       information than putting each alternative in its own capturing parentheses.

       If a verb with a name is encountered in a positive assertion that is  true,  the  name  is
       recorded  and passed back if it is the last-encountered. This does not happen for negative
       assertions or failing positive assertions.

       After a partial match or a failed match, the last encountered name  in  the  entire  match
       process is returned. For example:

           re> /X(*MARK:A)Y|X(*MARK:B)Z/mark
         data> XP
         No match, mark = B

       Note  that  in  this  unanchored  example the mark is retained from the match attempt that
       started at the letter "X" in the subject. Subsequent match attempts starting  at  "P"  and
       then  with  an empty string do not get as far as the (*MARK) item, but nevertheless do not
       reset it.

       If you are interested in (*MARK) values after failed matches, you should probably set  the
       PCRE2_NO_START_OPTIMIZE option (see above) to ensure that the match is always attempted.

   Verbs that act after backtracking

       The  following  verbs  do  nothing when they are encountered. Matching continues with what
       follows, but if there is a subsequent match failure, causing a backtrack to  the  verb,  a
       failure  is  forced.  That  is, backtracking cannot pass to the left of the verb. However,
       when one of these verbs appears inside an atomic group or in a lookaround  assertion  that
       is  true,  its  effect is confined to that group, because once the group has been matched,
       there is never any backtracking into it. Backtracking  from  beyond  an  assertion  or  an
       atomic group ignores the entire group, and seeks a preceding backtracking point.

       These  verbs differ in exactly what kind of failure occurs when backtracking reaches them.
       The behaviour described below is what happens when the verb is not in a subroutine  or  an
       assertion. Subsequent sections cover these special cases.

         (*COMMIT) or (*COMMIT:NAME)

       This  verb  causes  the  whole match to fail outright if there is a later matching failure
       that causes backtracking to reach it. Even  if  the  pattern  is  unanchored,  no  further
       attempts  to  find a match by advancing the starting point take place. If (*COMMIT) is the
       only backtracking verb that is encountered, once  it  has  been  passed  pcre2_match()  is
       committed to finding a match at the current starting point, or not at all. For example:

         a+(*COMMIT)b

       This  matches  "xxaab" but not "aacaab". It can be thought of as a kind of dynamic anchor,
       or "I've started, so I must finish."

       The behaviour of (*COMMIT:NAME) is not the  same  as  (*MARK:NAME)(*COMMIT).  It  is  like
       (*MARK:NAME)  in  that  the  name  is  remembered for passing back to the caller. However,
       (*SKIP:NAME) searches only for names that are set with (*MARK), ignoring those set by  any
       of the other backtracking verbs.

       If  there  is  more  than one backtracking verb in a pattern, a different one that follows
       (*COMMIT) may be triggered first, so merely passing (*COMMIT)  during  a  match  does  not
       always guarantee that a match must be at this starting point.

       Note that (*COMMIT) at the start of a pattern is not the same as an anchor, unless PCRE2's
       start-of-match optimizations are turned off, as shown in this output from pcre2test:

           re> /(*COMMIT)abc/
         data> xyzabc
          0: abc
         data>
         re> /(*COMMIT)abc/no_start_optimize
         data> xyzabc
         No match

       For the first pattern, PCRE2 knows that any match must start with "a", so the optimization
       skips  along  the subject to "a" before applying the pattern to the first set of data. The
       match attempt then succeeds. The second pattern disables the optimization that skips along
       to  the  first character. The pattern is now applied starting at "x", and so the (*COMMIT)
       causes the match to fail without trying any other starting points.

         (*PRUNE) or (*PRUNE:NAME)

       This verb causes the match to fail at the current starting  position  in  the  subject  if
       there  is a later matching failure that causes backtracking to reach it. If the pattern is
       unanchored, the normal "bumpalong" advance to the next starting  character  then  happens.
       Backtracking  can  occur  as  usual to the left of (*PRUNE), before it is reached, or when
       matching to the right of (*PRUNE), but if there is no match  to  the  right,  backtracking
       cannot  cross  (*PRUNE). In simple cases, the use of (*PRUNE) is just an alternative to an
       atomic group or possessive quantifier, but there are some uses of (*PRUNE) that cannot  be
       expressed  in  any  other  way.  In  an  anchored  pattern (*PRUNE) has the same effect as
       (*COMMIT).

       The behaviour of (*PRUNE:NAME) is  not  the  same  as  (*MARK:NAME)(*PRUNE).  It  is  like
       (*MARK:NAME)  in  that  the  name  is  remembered for passing back to the caller. However,
       (*SKIP:NAME) searches only for names  set  with  (*MARK),  ignoring  those  set  by  other
       backtracking verbs.

         (*SKIP)

       This  verb,  when  given  without  a name, is like (*PRUNE), except that if the pattern is
       unanchored, the "bumpalong" advance is not to the next character, but to the  position  in
       the  subject  where  (*SKIP)  was  encountered.  (*SKIP)  signifies that whatever text was
       matched leading up to it cannot be part  of  a  successful  match  if  there  is  a  later
       mismatch. Consider:

         a+(*SKIP)b

       If  the  subject is "aaaac...", after the first match attempt fails (starting at the first
       character in the string), the starting point skips on to start the next  attempt  at  "c".
       Note  that a possessive quantifier does not have the same effect as this example; although
       it would suppress backtracking during the first match attempt, the  second  attempt  would
       start at the second character instead of skipping on to "c".

       If  (*SKIP)  is  used  to specify a new starting position that is the same as the starting
       position of the current match, or (by being inside a  lookbehind)  earlier,  the  position
       specified by (*SKIP) is ignored, and instead the normal "bumpalong" occurs.

         (*SKIP:NAME)

       When  (*SKIP)  has  an  associated name, its behaviour is modified. When such a (*SKIP) is
       triggered, the previous path through the pattern is searched for the most  recent  (*MARK)
       that  has  the  same  name.  If  one  is  found, the "bumpalong" advance is to the subject
       position that corresponds to that (*MARK) instead of to where (*SKIP) was encountered.  If
       no (*MARK) with a matching name is found, the (*SKIP) is ignored.

       The  search for a (*MARK) name uses the normal backtracking mechanism, which means that it
       does not see (*MARK) settings that are inside atomic groups or  assertions,  because  they
       are never re-entered by backtracking. Compare the following pcre2test examples:

           re> /a(?>(*MARK:X))(*SKIP:X)(*F)|(.)/
         data: abc
          0: a
          1: a
         data:
           re> /a(?:(*MARK:X))(*SKIP:X)(*F)|(.)/
         data: abc
          0: b
          1: b

       In  the  first  example, the (*MARK) setting is in an atomic group, so it is not seen when
       (*SKIP:X) triggers, causing the (*SKIP) to be ignored. This allows the  second  branch  of
       the  pattern  to  be  tried  at  the first character position.  In the second example, the
       (*MARK) setting is not in an atomic group. This allows (*SKIP:X) to find the (*MARK)  when
       it  backtracks,  and  this causes a new matching attempt to start at the second character.
       This time, the (*MARK) is never seen because "a"  does  not  match  "b",  so  the  matcher
       immediately jumps to the second branch of the pattern.

       Note  that (*SKIP:NAME) searches only for names set by (*MARK:NAME). It ignores names that
       are set by other backtracking verbs.

         (*THEN) or (*THEN:NAME)

       This verb causes a skip to the next innermost alternative when  backtracking  reaches  it.
       That  is,  it  cancels  any  further backtracking within the current alternative. Its name
       comes from the observation that it can be used for a pattern-based if-then-else block:

         ( COND1 (*THEN) FOO | COND2 (*THEN) BAR | COND3 (*THEN) BAZ ) ...

       If the COND1 pattern matches, FOO is tried (and possibly further items after  the  end  of
       the  group  if  FOO succeeds); on failure, the matcher skips to the second alternative and
       tries COND2, without backtracking into COND1. If that succeeds and  BAR  fails,  COND3  is
       tried.  If subsequently BAZ fails, there are no more alternatives, so there is a backtrack
       to whatever came before the entire group. If (*THEN) is not inside an alternation, it acts
       like (*PRUNE).

       The  behaviour  of  (*THEN:NAME)  is  not  the  same  as  (*MARK:NAME)(*THEN).  It is like
       (*MARK:NAME) in that the name is remembered for  passing  back  to  the  caller.  However,
       (*SKIP:NAME)  searches  only  for  names  set  with  (*MARK),  ignoring those set by other
       backtracking verbs.

       A group that does not contain a | character is just a part of the  enclosing  alternative;
       it  is  not  a nested alternation with only one alternative. The effect of (*THEN) extends
       beyond such a group to the enclosing alternative.  Consider this pattern, where A, B, etc.
       are complex pattern fragments that do not contain any | characters at this level:

         A (B(*THEN)C) | D

       If  A  and B are matched, but there is a failure in C, matching does not backtrack into A;
       instead it moves to the next alternative, that is, D.  However, if  the  group  containing
       (*THEN) is given an alternative, it behaves differently:

         A (B(*THEN)C | (*FAIL)) | D

       The  effect  of (*THEN) is now confined to the inner group. After a failure in C, matching
       moves to (*FAIL), which causes  the  whole  group  to  fail  because  there  are  no  more
       alternatives to try. In this case, matching does backtrack into A.

       Note  that  a conditional group is not considered as having two alternatives, because only
       one is ever used. In other words, the | character in a conditional group has  a  different
       meaning. Ignoring white space, consider:

         ^.*? (?(?=a) a | b(*THEN)c )

       If the subject is "ba", this pattern does not match. Because .*? is ungreedy, it initially
       matches zero characters. The condition (?=a) then fails, the character "b" is matched, but
       "c" is not. At this point, matching does not backtrack to .*? as might perhaps be expected
       from the presence of the |  character.  The  conditional  group  is  part  of  the  single
       alternative  that  comprises  the  whole  pattern, and so the match fails. (If there was a
       backtrack into .*?, allowing it to match "b", the match would succeed.)

       The verbs just described provide four different "strengths"  of  control  when  subsequent
       matching  fails.  (*THEN)  is  the weakest, carrying on the match at the next alternative.
       (*PRUNE) comes next, failing the match at the current starting position, but  allowing  an
       advance to the next character (for an unanchored pattern). (*SKIP) is similar, except that
       the advance may be more than one character. (*COMMIT) is the strongest, causing the entire
       match to fail.

   More than one backtracking verb

       If  more  than  one backtracking verb is present in a pattern, the one that is backtracked
       onto first acts. For example, consider this pattern, where A, B, etc. are complex  pattern
       fragments:

         (A(*COMMIT)B(*THEN)C|ABD)

       If  A  matches  but  B  fails, the backtrack to (*COMMIT) causes the entire match to fail.
       However, if A and B match,  but  C  fails,  the  backtrack  to  (*THEN)  causes  the  next
       alternative (ABD) to be tried. This behaviour is consistent, but is not always the same as
       Perl's. It means that if two or more backtracking verbs appear in succession, all the  the
       last of them has no effect. Consider this example:

         ...(*COMMIT)(*PRUNE)...

       If  there  is  a matching failure to the right, backtracking onto (*PRUNE) causes it to be
       triggered, and its action is taken. There can never be a backtrack onto (*COMMIT).

   Backtracking verbs in repeated groups

       PCRE2 sometimes differs from Perl in  its  handling  of  backtracking  verbs  in  repeated
       groups. For example, consider:

         /(a(*COMMIT)b)+ac/

       If  the  subject  is "abac", Perl matches unless its optimizations are disabled, but PCRE2
       always fails because the (*COMMIT) in the second repeat of the group acts.

   Backtracking verbs in assertions

       (*FAIL) in any assertion has its normal effect: it  forces  an  immediate  backtrack.  The
       behaviour  of  the  other  backtracking  verbs  depends on whether or not the assertion is
       standalone or acting as the condition in a conditional group.

       (*ACCEPT) in a standalone positive assertion causes the assertion to succeed  without  any
       further  processing;  captured  strings  and  a  mark  name  (if  set)  are retained. In a
       standalone negative assertion, (*ACCEPT) causes the assertion to fail without any  further
       processing; captured substrings and any mark name are discarded.

       If  the assertion is a condition, (*ACCEPT) causes the condition to be true for a positive
       assertion and false for a negative one; captured substrings are retained in both cases.

       The remaining verbs act only when a later failure causes a backtrack to reach  them.  This
       means that, for the Perl-compatible assertions, their effect is confined to the assertion,
       because Perl lookaround assertions are atomic. A  backtrack  that  occurs  after  such  an
       assertion  is  complete  does  not jump back into the assertion. Note in particular that a
       (*MARK) name that is set in an assertion is not "seen"  by  an  instance  of  (*SKIP:NAME)
       later in the pattern.

       PCRE2  now  supports  non-atomic positive assertions, as described in the section entitled
       "Non-atomic  assertions"  above.  These  assertions  must  be  standalone  (not  used   as
       conditions).  They  are  not Perl-compatible. For these assertions, a later backtrack does
       jump back into the assertion, and therefore verbs such as (*COMMIT) can  be  triggered  by
       backtracks from later in the pattern.

       The  effect  of (*THEN) is not allowed to escape beyond an assertion. If there are no more
       branches to try, (*THEN) causes a positive assertion to be false, and a negative assertion
       to be true.

       The  other  backtracking  verbs  are  not treated specially if they appear in a standalone
       positive assertion. In a conditional positive assertion,  backtracking  (from  within  the
       assertion) into (*COMMIT), (*SKIP), or (*PRUNE) causes the condition to be false. However,
       for both standalone and conditional  negative  assertions,  backtracking  into  (*COMMIT),
       (*SKIP),  or  (*PRUNE)  causes  the  assertion to be true, without considering any further
       alternative branches.

   Backtracking verbs in subroutines

       These behaviours occur whether or not the group is called recursively.

       (*ACCEPT) in a group called as a subroutine causes the subroutine match to succeed without
       any  further processing. Matching then continues after the subroutine call. Perl documents
       this behaviour. Perl's treatment of the other verbs in subroutines is  different  in  some
       cases.

       (*FAIL)  in  a  group called as a subroutine has its normal effect: it forces an immediate
       backtrack.

       (*COMMIT), (*SKIP), and (*PRUNE) cause the subroutine match  to  fail  when  triggered  by
       being  backtracked  to in a group called as a subroutine. There is then a backtrack at the
       outer level.

       (*THEN), when triggered, skips to the next alternative in the  innermost  enclosing  group
       that  has  alternatives  (its normal behaviour). However, if there is no such group within
       the subroutine's group, the subroutine match fails and there is a backtrack at  the  outer
       level.

SEE ALSO


       pcre2api(3), pcre2callout(3), pcre2matching(3), pcre2syntax(3), pcre2(3).

AUTHOR


       Philip Hazel
       Retired from University Computing Service
       Cambridge, England.

REVISION


       Last updated: 12 January 2022
       Copyright (c) 1997-2022 University of Cambridge.