Provided by: geographiclib-tools_2.3-1_amd64 bug

NAME

       ConicProj -- perform conic projections

SYNOPSIS

       ConicProj ( -c | -a ) lat1 lat2 [ -l lon0 ] [ -k k1 ] [ -r ] [ -e a f ] [ -w ] [ -p prec ]
       [ --comment-delimiter commentdelim ] [ --version | -h | --help ] [ --input-file infile |
       --input-string instring ] [ --line-separator linesep ] [ --output-file outfile ]

DESCRIPTION

       Perform one of two conic projections geodesics.  Convert geodetic coordinates to either
       Lambert conformal conic or Albers equal area coordinates.  The standard latitudes lat1 and
       lat2 are specified by that the -c option (for Lambert conformal conic) or the -a option
       (for Albers equal area).  At least one of these options must be given (the last one given
       is used).  Specify lat1 = lat2, to obtain the case with a single standard parallel.  The
       central meridian is given by lon0.  The longitude of origin is given by the latitude of
       minimum (azimuthal) scale for Lambert conformal conic (Albers equal area).  The
       (azimuthal) scale on the standard parallels is k1.

       Geodetic coordinates are provided on standard input as a set of lines containing (blank
       separated) latitude and longitude (decimal degrees or degrees, minutes, seconds);  for
       details on the allowed formats for latitude and longitude, see the "GEOGRAPHIC
       COORDINATES" section of GeoConvert(1).  For each set of geodetic coordinates, the
       corresponding projected easting, x, and northing, y, (meters) are printed on standard
       output together with the meridian convergence gamma (degrees) and (azimuthal) scale k.
       For Albers equal area, the radial scale is 1/k.  The meridian convergence is the bearing
       of the y axis measured clockwise from true north.

       Special cases of the Lambert conformal projection are the Mercator projection (the
       standard latitudes equal and opposite) and the polar stereographic projection (both
       standard latitudes correspond to the same pole).  Special cases of the Albers equal area
       projection are the cylindrical equal area projection (the standard latitudes equal and
       opposite), the Lambert azimuthal equal area projection (both standard latitude corresponds
       to the same pole), and the Lambert equal area conic projection (one standard parallel is
       at a pole).

OPTIONS

       -c lat1 lat2
           use the Lambert conformal conic projection with standard parallels lat1 and lat2.

       -a lat1 lat2
           use the Albers equal area projection with standard parallels lat1 and lat2.

       -l lon0
           specify the longitude of origin lon0 (degrees, default 0).

       -k k1
           specify the (azimuthal) scale k1 on the standard parallels (default 1).

       -r  perform the reverse projection.  x and y are given on standard input and each line of
           standard output gives latitude, longitude, gamma, and k.

       -e a f
           specify the ellipsoid via the equatorial radius, a and the flattening, f.  Setting f =
           0 results in a sphere.  Specify f < 0 for a prolate ellipsoid.  A simple fraction,
           e.g., 1/297, is allowed for f.  By default, the WGS84 ellipsoid is used, a = 6378137
           m, f = 1/298.257223563.

       -w  toggle the longitude first flag (it starts off); if the flag is on, then on input and
           output, longitude precedes latitude (except that, on input, this can be overridden by
           a hemisphere designator, N, S, E, W).

       -p prec
           set the output precision to prec (default 6).  prec is the number of digits after the
           decimal point for lengths (in meters).  For latitudes and longitudes (in degrees), the
           number of digits after the decimal point is prec + 5.  For the convergence (in
           degrees) and scale, the number of digits after the decimal point is prec + 6.

       --comment-delimiter commentdelim
           set the comment delimiter to commentdelim (e.g., "#" or "//").  If set, the input
           lines will be scanned for this delimiter and, if found, the delimiter and the rest of
           the line will be removed prior to processing and subsequently appended to the output
           line (separated by a space).

       --version
           print version and exit.

       -h  print usage and exit.

       --help
           print full documentation and exit.

       --input-file infile
           read input from the file infile instead of from standard input; a file name of "-"
           stands for standard input.

       --input-string instring
           read input from the string instring instead of from standard input.  All occurrences
           of the line separator character (default is a semicolon) in instring are converted to
           newlines before the reading begins.

       --line-separator linesep
           set the line separator character to linesep.  By default this is a semicolon.

       --output-file outfile
           write output to the file outfile instead of to standard output; a file name of "-"
           stands for standard output.

EXAMPLES

          echo 39.95N 75.17W | ConicProj -c 40d58 39d56 -l 77d45W
          => 220445 -52372 1.67 1.0
          echo 220445 -52372 | ConicProj -c 40d58 39d56 -l 77d45W -r
          => 39.95 -75.17 1.67 1.0

ERRORS

       An illegal line of input will print an error message to standard output beginning with
       "ERROR:" and causes ConicProj to return an exit code of 1.  However, an error does not
       cause ConicProj to terminate; following lines will be converted.

AUTHOR

       ConicProj was written by Charles Karney.

HISTORY

       ConicProj was added to GeographicLib, <https://geographiclib.sourceforge.io>, in version
       1.9.