Provided by: plc-utils-extra_0.0.6+git20230504.1ba7d5a0-1_amd64 bug

NAME

       ampstat - Qualcomm Atheros AR7x00 Link Statistics

SYNOPSIS

       ampstat [options] [device] [device] [...]

DESCRIPTION

       The  Atheros  Device  Statistics  Utility  polls  a  device  and  prints  network and link
       statistics in various formats suitable for use by other  programs.   This  is  a  work  in
       progress  so  user  feedback  is  encouraged.   Link statistics are only valid between one
       powerline device and another.

       This program is part of the Qualcomm Atheros Powerline Toolkit.  See the plc man page  for
       an overview and installation instructions.

COMMENTS

       This  program  is identical to legacy program int6kstat but uses version 1 of the Qualcomm
       Atheros VS_NW_INFO Atheros vendor-specific  message.   Older  firmware  versions  may  not
       recognize this message version.

OPTIONS

       -C     Clear  device  link statistics using VS_LNK_STATS.  Statistics are read and cleared
              then displayed.  The statistics that are read and displayed depend on  options  -d,
              -p and -s but all link statistics are cleared.

       -d direction
              Return statistics for the specified direction using VS_LNK_STATS.  Direction can be
              0=tx, 1=rx, 2=both or "rx", "tx" or "both".

       -e     Redirects stderr messages to stdout.  By convention status and error  messages  are
              printed  on  stderr while primary program output is printed on stdout.  This option
              prints all output on stdout in cases where this is desired.

       -i     Select the host Ethernet interface.  All requests are sent via this host  interface
              and  only  reponses  received  via this host interface are recognized.  The default
              interface is  eth1  because  most  people  use  eth0  as  their  principle  network
              connection;  however,  if  environment  string  "PLC"  is  defined  then  it  takes
              precedence over the default interface.  This  option  then  takes  precedence  over
              either default.

       -l count
              Define  the  number  of  times  that  the  command will be repeated for each device
              specified.  Normally, you will repeat operations on one device only.

       -m     Displays network membership information, as seen by one device,  using  VS_NW_INFO.
              Use option -t for complete network topology seen by the local host.

       -p peernode
              Ethernet  hardware  address  of  the  peer  node  for VS_LNK_STATS.  This option is
              required for all Link ID values except 0xFC.  The default is 00:00:00:00:00:00.

       -q     Enter quiet mode.  Progress messages are suppressed.

       -s linkid
              The Link ID for VS_LNK_STATS.  Link ID values range from 0 through 255 but not  all
              values  are  accepted  by the device firmware.  Values may be expressed in decimal,
              binary prefixed with "0b" or hexadecimal prefixed by "0x".  Many valid  values  can
              be  expressed  by  name.   Valid values are listed and explained under LINKID.  The
              default Link ID is 0xFC.

       -t     Display network topology using VS_SW_VER and VS_NW_INFO messages.  This  option  is
              similar  to  option  -m but provides complete network topology plus device hardware
              and firmware version.  Topology is always relative to  the  local  host,  or  local
              hosts  if  present.  Powerline devices that appear on the command line are not used
              for this operation.  Older QCA powerline devices may fail to respond to  this  this
              option.  In that event, use program int6kstat or plcstat.

       -v     Enter  verbose  mode.   All  Etherenet  frames  sent or received by the program are
              displayed on stdout.

       -w seconds
              Defines the number of seconds to wait before repeating command line options.   This
              option has no effect unless option -l is also specified with a non-zero value.

       -?, --help
              Print  program  help  summary  on  stdout.  This option takes precedence over other
              options on the command line.

       -!, --version
              Print program version information on stdout.  This  option  takes  precedence  over
              other  options  on  the command line.  Use this option when sending screen dumps to
              Atheros Technical Support so that they know exactly  which  version  of  the  Linux
              Toolkit you are using.

ARGUMENTS

       device The  MAC address of some powerline device.  More than one address may be specified.
              If more than one address is specified then operations are performed on each  device
              in turn.  The default address is local.  See DEVICES for information about symbolic
              device addresses.

LINKID

       0x00,CSMA-CAP0
              Display CSMA statistics for CAP0 traffic using a single peer node.  The  peer  node
              MAC address must be specified using option -p.

       0x01,CSMA-CAP1
              Display  CSMA  statistics for CAP1 traffic using a single peer node.  The peer node
              MAC address must be specified using option -p.

       0x02,CSMA-CAP2
              Display CSMA statistics for CAP2 traffic using a single peer node.  The  peer  node
              MAC address must be specified using option -p.

       0x03,CSMA-CAP3
              Display  CSMA  statistics for CAP3 traffic using a single peer node.  The peer node
              MAC address must be specified using option -p.

       0xF8,CSMA-PEER
              Display CSMA statistics for all traffic using a single  peer node.  The  peer  node
              MAC address must be specified using option -p.

       0xFC,CSMA-ALL
              Display  CSMA  statistics  for  all  traffic  with all peer nodes.  A peer node MAC
              address is not needed and will be ignored if provided.  This value is  the  default
              for option -s.

DEVICES

       Powerline  devices  use Ethernet Media Access Control (MAC) addresses.  A MAC address is a
       48-bit value entered as 12 hexadecimal digits in upper, lower  or  mixed  character  case.
       Octets   may   be  separated  with  colons  for  clarity.   For  example,  "00b052000001",
       "00:b0:52:00:00:01" and "00b052:000001" are valid and equivalent.

       The following MAC addresses are special and may be entered by name instead of number.

       all    Same as "broadcast".

       broadcast
              A synonym for the Ethernet  broadcast  address,  FF:FF:FF:FF:FF:FF.   All  devices,
              whether local, remote or foreign recognize messages sent to this address.  A remote
              device is any device at the far end of a powerline connection.  A foreign device is
              any device not manufactured by Atheros.

       local  A  synonym for the Qualcomm Atheros vendor specific Local Management Address (LMA),
              00:B0:52:00:00:01.  All local Atheros devices recognize this address but remote and
              foreign  devices  do  not.   A  remote  device  is  any  device at the far end of a
              powerline connection.  A foreign device is any device not manufactured by Atheros.

REFERENCES

       See the Qualcomm  Atheros  HomePlug  AV  Firmware  Technical  Reference  Manual  for  more
       information.

DISCLAIMER

       Atheros  HomePlug  AV  Vendor  Specific  Management Message Entry structure and content is
       proprietary to Qualcomm Atheros, Ocala FL USA.  Consequently, public information  may  not
       be available.  Qualcomm Atheros reserves the right to modify message structure and content
       in future firmware releases without any obligation to notify or compensate users  of  this
       program.

EXAMPLES

       None.

SEE ALSO

       plc(1), amplist(1), amprate(1), ampstat(1), amptone(1), amptool(1)

CREDITS

        Charles Maier