Provided by: altos_1.9.16-2_amd64 bug

NAME

       ao-cal-freq - Calibrate AltOS flight computer frequency

SYNOPSIS

       ao-cal-freq  [-T  tty-device] [--tty tty-device] [-D altos-device] [--device altos-device]
       [-v] [--verbose] [-n] [--nosave] [-o  cal-value-output-file]  [--output  cal-value-output-
       file]

DESCRIPTION

       ao-cal-freq drives the frequency calibration process and saves the result.

OPTIONS

       -T tty-device | --tty tty-device
              This  selects  which  tty  device  the debugger uses to communicate with the target
              device. The special name 'BITBANG' directs ao-dbg to  use  the  cp2103  connection,
              otherwise  this  should  be  a usb serial port connected to a suitable cc1111 debug
              node.

       -D AltOS-device | --device AltOS-device
              Search for a connected device. This requires an argument of one  of  the  following
              forms:

              TeleMega:2
              TeleMega
              2

              Leaving  out  the  product  name  will cause the tool to select a suitable product,
              leaving out the serial number will cause the tool to match  one  of  the  available
              devices.

       -o cal-value-output-file | --output cal-value-output-file
              Writes the resulting calibration value to the specified file.

       -n | --nosave
              Inhibits  saving  the  calibration value on the device. Necessary for devices which
              don't have on-board configuration storage.

       -v | --verbose
              Makes ao-cal-freq chatty about communication with the target device.

USAGE

       ao-cal-freq opens the target device, interactively calibrates the  frequency,  then  shows
       the  resulting  calibration  values  and  (optionally)  saves them to configuration memory
       and/or a file.

AUTHOR

       Keith Packard

                                           ao-cal-freq                                 AO-LOAD(1)