Provided by: babeltrace2_2.0.5-1_amd64 bug

NAME

       babeltrace2-run - Create a Babeltrace 2 trace processing graph and run it

SYNOPSIS

       babeltrace2 [GENERAL OPTIONS] run [--retry-duration=TIME-US]
                   --connect=CONN-RULE... COMPONENTS

DESCRIPTION

       The run command creates a Babeltrace 2 trace processing graph and runs it.

       See babeltrace2-intro(7) to learn more about the Babeltrace 2 project and its core
       concepts.

       The run command dynamically loads Babeltrace 2 plugins which supply component classes.
       With the run command, you specify which component classes to instantiate as components and
       how to connect them.

       The steps to write a babeltrace2 run command line are:

        1. Specify which component classes to instantiate as components with many --component
           options and how to configure them.

           This is the COMPONENTS part of the synopsis. See “Create components” to learn more.

        2. Specify how to connect components together with one or more --connect options.

           See “Connect components” to learn more.

           Note
           The babeltrace2-convert(1) command is a specialization of the run command for the very
           common case of converting one or more traces: it generates a run command line and
           executes it. You can use its --run-args or --run-args-0 option to make it print the
           equivalent run command line instead.

   Create components
       To create a component, use the --component option. This option specifies:

       •   The name of the component, unique amongst all the component names of the trace
           processing graph.

       •   The type of the component class to instantiate: source, filter, or sink.

       •   The name of the plugin in which to find the component class to instantiate.

       •   The name of the component class to instantiate.

       Use the --component option multiple times to create multiple components. You can
       instantiate the same component class multiple times as different components.

       At any point in the command line, the --base-params sets the current base initialization
       parameters and the --reset-base-params resets them. When you specify a --component option,
       its initial initialization parameters are a copy of the current base initialization
       parameters.

       Immediately following a --component option on the command line, the created component is
       known as the current component (until the next --component option).

       The --params=PARAMS option adds parameters to the current component’s initialization
       parameters. If PARAMS contains a key which exists in the current component’s
       initialization parameters, this parameter is replaced.

   Connect components
       The components which you create from component classes with the --component option (see
       “Create components”) add input and output ports depending on their type. An output port is
       from where messages, like trace events, are sent. An input port is where messages are
       received. For a given component, each port has a unique name.

       The purpose of the run command is to create a trace processing graph, that is, to know
       which component ports to connect together. The command achieves this with the help of the
       connection rules that you provide with one or more --connect=CONN-RULE options.

       The format of CONN-RULE is:

           UP-COMP-PAT[.UP-PORT-PAT]:DOWN-COMP-PAT[.DOWN-PORT-PAT]

       UP-COMP-PAT
           Upstream component name pattern.

       UP-PORT-PAT
           Upstream (output) port name pattern.

       DOWN-COMP-PAT
           Downstream component name pattern.

       DOWN-PORT-PAT
           Downstream (input) port name pattern.

       When a source or filter component adds a new output port within the processing graph, the
       run command does the following to find an input port to connect it to:

           For each connection rule (--connect options, in order):
             If the output port's component's name matches UP-COMP-PAT and the
             output port's name matches UP-PORT-PAT:
               For each component COMP in the trace processing graph:
                 If the name of COMP matches DOWN-COMP-PAT:
                   Select the first input port of COMP of which the name matches
                   DOWN-PORT-PAT, or fail with no match.

           No possible connection: fail with no match.

       UP-COMP-PAT, UP-PORT-PAT, DOWN-COMP-PAT, and DOWN-PORT-PAT are globbing patterns where
       only the wildcard character, *, is special: it matches zero or more characters. You must
       escape the *, ?, [, ., :, and \ characters with \.

       When you do not specify UP-PORT-PAT or DOWN-PORT-PAT, they are equivalent to *.

       You can leverage this connection mechanism to specify fallbacks with a careful use of
       wildcards, as the order of the --connect options on the command line is significant. For
       example:

           --connect='A.out*:B.in*' --connect=A:B --connect='*:C'

       With those connection rules, the run command connects:

       •   Any output port of which the name starts with out of component A to the first input
           port of which the name starts with in of component B.

       •   Any other output port of component A to the first available input port of component B.

       •   Any other output port (of any component except A) to the first available input port of
           component C.

       The run command fails when it cannot find an input port to which to connect a given output
       port using the provided connection rules.

       See “EXAMPLES” for more examples.

OPTIONS

   General
       You can use those options before the command name.

       See babeltrace2(1) for more details.

       -d, --debug
           Legacy option: this is equivalent to --log-level=TRACE.

       -l LVL, --log-level=LVL
           Set the log level of all known Babeltrace 2 loggers to LVL.

       --omit-home-plugin-path
           Do not search for plugins in $HOME/.local/lib/babeltrace2/plugins.

       --omit-system-plugin-path
           Do not search for plugins in /usr/lib/babeltrace2/plugins.

       --plugin-path=PATH[:PATH]...
           Add PATH to the list of paths in which plugins can be found.

       -v, --verbose
           Legacy option: this is equivalent to --log-level=INFO.

   Component creation
       See “Create components” for more details.

       -b PARAMS, --base-params=PARAMS
           Set the current base parameters to PARAMS.

           You can reset the current base parameters with the --reset-base-params option.

           See the --params option for the format of PARAMS.

       -c NAME:COMP-CLS-TYPE.PLUGIN-NAME.COMP-CLS-NAME,
       --component=NAME:COMP-CLS-TYPE.PLUGIN-NAME.COMP-CLS-NAME
           Create a component named NAME from the component class of type COMP-CLS-TYPE named
           COMP-CLS-NAME found in the plugin named PLUGIN-NAME, and set it as the current
           component.

           The available values for TYPE are:

           source, src
               Source component class.

           filter, flt
               Filter component class.

           sink
               Sink component class.

           The initial initialization parameters of this component are copied from the current
           base initialization parameters (see the --base-params option).

       -l LVL, --log-level=LVL
           Set the log level of the current component to LVL.

           The available values for LVL are:

           NONE, N
               Logging is disabled.

           FATAL, F
               Severe errors that lead the execution to abort immediately.

               This level should be enabled in production.

           ERROR, E
               Errors that might still allow the execution to continue.

               Usually, once one or more errors are reported at this level, the application,
               plugin, or library won’t perform any more useful task, but it should still exit
               cleanly.

               This level should be enabled in production.

           WARN, WARNING, W
               Unexpected situations which still allow the execution to continue.

               This level should be enabled in production.

           INFO, I
               Informational messages that highlight progress or important states of the
               application, plugins, or library.

               This level can be enabled in production.

           DEBUG, D
               Debugging information, with a higher level of details than the TRACE level.

               This level should NOT be enabled in production.

           TRACE, T
               Low-level debugging context information.

               This level should NOT be enabled in production.

       -p PARAMS, --params=PARAMS
           Add PARAMS to the initialization parameters of the current component.

           If PARAMS contains a key which exists in the current component’s initialization
           parameters, replace the parameter.

           The format of PARAMS is a comma-separated list of NAME=VALUE assignments:

               NAME=VALUE[,NAME=VALUE]...

           NAME
               Parameter name (C identifier plus the :, ., and - characters).

           VALUE
               One of:

               •   null, nul, NULL: null value.

               •   true, TRUE, yes, YES: true boolean value.

               •   false, FALSE, no, NO: false boolean value.

               •   Binary (0b prefix), octal (0 prefix), decimal, or hexadecimal (0x prefix)
                   unsigned (with + prefix) or signed 64-bit integer.

               •   Double precision floating point number (scientific notation is accepted).

               •   Unquoted string with no special characters, and not matching any of the null
                   and boolean value symbols above.

               •   Double-quoted string (accepts escape characters).

               •   Array, formatted as an opening [, a comma-separated list of VALUE, and a
                   closing ].

               •   Map, formatted as an opening {, a comma-separated list of NAME=VALUE
                   assignments, and a closing }.

               You may put whitespaces around the individual = (assignment), , (separator), [
               (array beginning), ] (array end), { (map beginning), and } (map end) characters.

           Example:

               --params='many=null, fresh=yes, condition=false, squirrel=-782329,
                         play=+23, observe=3.14, simple=beef,
                         needs-quotes="some string",
                         escape.chars-are:allowed="a \" quote",
                         things=[1, "hello", 2.71828],
                         frog={slow=2, bath=[bike, 23], blind=NO}'

               Important
               Like in the example above, make sure to single-quote the whole argument when you
               run this command from a shell, as it can contain many special characters.

       -r, --reset-base-params
           Reset the current base parameters.

           You can set the current base parameters with the --base-params option.

   Component connection
       -x CONN-RULE, --connect=CONN-RULE
           Add the connection rule CONN-RULE.

           The format of CONN-RULE is:

               UP-COMP-PAT[.UP-PORT-PAT]:DOWN-COMP-PAT[.DOWN-PORT-PAT]

           UP-COMP-PAT
               Upstream component name pattern.

           UP-PORT-PAT
               Upstream (output) port name pattern.

           DOWN-COMP-PAT
               Downstream component name pattern.

           DOWN-PORT-PAT
               Downstream (input) port name pattern.

           See “Connect components” to learn more.

   Graph configuration
       --retry-duration=TIME-US
           Set the duration of a single retry to TIME-US µs when a sink component reports "try
           again later" (busy network or file system, for example).

           Default: 100000 (100 ms).

   Command information
       -h, --help
           Show the command’s help and quit.

EXAMPLES

       Example 1. Create a single-port source component and a single-port sink component and
       connect them.

           $ babeltrace2 run --component=A:src.plug.my-src \
                             --component=B:sink.plug.my-sink \
                             --connect=A:B

       Possible resulting graph:

           +-----------------+    +-------------------+
           | src.plug.my-src |    | sink.plug.my-sink |
           |       [A]       |    |         [B]       |
           |                 |    |                   |
           |             out @--->@ in                |
           +-----------------+    +-------------------+

       Example 2. Use the --params option to set the current component’s initialization
       parameters.

       In this example, the --params option only applies to component the-source.

           $ babeltrace2 run --component=the-source:src.my-plugin.my-src \
                             --params=offset=123,flag=true \
                             --component=the-sink:sink.my-plugin.my-sink \
                             --connect=the-source:the-sink

       Example 3. Use the --base-params and --reset-base-params options to set and reset the
       current base initialization parameters.

       In this example, the effective initialization parameters of the created components are:

       Component A
           offset=1203, flag=false

       Component B
           offset=1203, flag=true, type=event

       Component C
           ratio=0.25

           $ babeltrace2 run --base-params=offset=1203,flag=false \
                             --component=A:src.plugin.compcls \
                             --component=B:flt.plugin.compcls \
                             --params=flag=true,type=event \
                             --reset-base-params \
                             --component=C:sink.plugin.compcls \
                             --params=ratio=0.25 \
                             --connect=A:B --connect=B:C

       Example 4. Specify a component connection fallback rule.

       In this example, any A output port of which the name starts with foo is connected to a B
       input port of which the name starts with nin. Any other A output port is connected to a B
       input port of which the name starts with oth.

       The order of the --connect options is important here: the opposite order would create a
       system in which the first rule is always satisfied, and any A output port, whatever its
       name, would be connected to a B input port with a name that starts with oth.

           $ babeltrace2 run --component=A:src.plug.my-src \
                             --component=B:sink.plug.my-sink \
                             --connect='A.foo*:B:nin*' --connect='A:B.oth*'

       Possible resulting graph:

           +-----------------+    +-------------------+
           | src.plug.my-src |    | sink.plug.my-sink |
           |       [A]       |    |        [B]        |
           |                 |    |                   |
           |            foot @--->@ nine              |
           |         foodies @--->@ ninja             |
           |       some-port @--->@ othello           |
           |           hello @--->@ other             |
           +-----------------+    +-------------------+

ENVIRONMENT VARIABLES

   Babeltrace 2 library
       BABELTRACE_EXEC_ON_ABORT=CMDLINE
           Execute the command line CMDLINE, as parsed like a UNIX 98 shell, when any part of the
           Babeltrace 2 project unexpectedly aborts.

           The application only aborts when the executed command returns, ignoring its exit
           status.

           This environment variable is ignored when the application has the setuid or the setgid
           access right flag set.

       BABELTRACE_TERM_COLOR=(AUTO | NEVER | ALWAYS)
           Force the terminal color support for the babeltrace2(1) program and the project’s
           plugins.

           The available values are:

           AUTO
               Only emit terminal color codes when the standard output and error streams are
               connected to a color-capable terminal.

           NEVER
               Never emit terminal color codes.

           ALWAYS
               Always emit terminal color codes.

       BABELTRACE_TERM_COLOR_BRIGHT_MEANS_BOLD=0
           Set to 0 to emit SGR (see <https://en.wikipedia.org/wiki/ANSI_escape_code>) codes 90
           to 97 for bright colors instead of bold (SGR code 1) and standard color codes (SGR
           codes 30 to 37).

       BABELTRACE_PLUGIN_PATH=PATHS
           Set the list of directories, in order, in which dynamic plugins can be found before
           other directories are considered to PATHS (colon-separated, or semicolon on Windows).

       LIBBABELTRACE2_DISABLE_PYTHON_PLUGINS=1
           Disable the loading of any Babeltrace 2 Python plugin.

       LIBBABELTRACE2_INIT_LOG_LEVEL=LVL
           Force the Babeltrace 2 library’s initial log level to be LVL.

           If this environment variable is set, it overrides the log level set by the --log-level
           option for the Babeltrace 2 library logger.

           The available values for LVL are:

           NONE, N
               Logging is disabled.

           FATAL, F
               Severe errors that lead the execution to abort immediately.

               This level should be enabled in production.

           ERROR, E
               Errors that might still allow the execution to continue.

               Usually, once one or more errors are reported at this level, the application,
               plugin, or library won’t perform any more useful task, but it should still exit
               cleanly.

               This level should be enabled in production.

           WARN, WARNING, W
               Unexpected situations which still allow the execution to continue.

               This level should be enabled in production.

           INFO, I
               Informational messages that highlight progress or important states of the
               application, plugins, or library.

               This level can be enabled in production.

           DEBUG, D
               Debugging information, with a higher level of details than the TRACE level.

               This level should NOT be enabled in production.

           TRACE, T
               Low-level debugging context information.

               This level should NOT be enabled in production.

       LIBBABELTRACE2_NO_DLCLOSE=1
           Make the Babeltrace 2 library leave any dynamically loaded modules (plugins and plugin
           providers) open at exit. This can be useful for debugging purposes.

       LIBBABELTRACE2_PLUGIN_PROVIDER_DIR=DIR
           Set the directory from which the Babeltrace 2 library dynamically loads plugin
           provider shared objects to DIR.

           If this environment variable is set, it overrides the default plugin provider
           directory.

   Babeltrace 2 Python bindings
       BABELTRACE_PYTHON_BT2_LOG_LEVEL=LVL
           Force the Babeltrace 2 Python bindings log level to be LVL.

           If this environment variable is set, it overrides the log level set by the --log-level
           option for the Python bindings logger.

           The available values for LVL are:

           NONE, N
               Logging is disabled.

           FATAL, F
               Severe errors that lead the execution to abort immediately.

               This level should be enabled in production.

           ERROR, E
               Errors that might still allow the execution to continue.

               Usually, once one or more errors are reported at this level, the application,
               plugin, or library won’t perform any more useful task, but it should still exit
               cleanly.

               This level should be enabled in production.

           WARN, WARNING, W
               Unexpected situations which still allow the execution to continue.

               This level should be enabled in production.

           INFO, I
               Informational messages that highlight progress or important states of the
               application, plugins, or library.

               This level can be enabled in production.

           DEBUG, D
               Debugging information, with a higher level of details than the TRACE level.

               This level should NOT be enabled in production.

           TRACE, T
               Low-level debugging context information.

               This level should NOT be enabled in production.

   CLI
       BABELTRACE_CLI_LOG_LEVEL=LVL
           Force babeltrace2 CLI’s log level to be LVL.

           If this environment variable is set, it overrides the log level set by the --log-level
           option for the CLI logger.

           The available values for LVL are:

           NONE, N
               Logging is disabled.

           FATAL, F
               Severe errors that lead the execution to abort immediately.

               This level should be enabled in production.

           ERROR, E
               Errors that might still allow the execution to continue.

               Usually, once one or more errors are reported at this level, the application,
               plugin, or library won’t perform any more useful task, but it should still exit
               cleanly.

               This level should be enabled in production.

           WARN, WARNING, W
               Unexpected situations which still allow the execution to continue.

               This level should be enabled in production.

           INFO, I
               Informational messages that highlight progress or important states of the
               application, plugins, or library.

               This level can be enabled in production.

           DEBUG, D
               Debugging information, with a higher level of details than the TRACE level.

               This level should NOT be enabled in production.

           TRACE, T
               Low-level debugging context information.

               This level should NOT be enabled in production.

       BABELTRACE_CLI_WARN_COMMAND_NAME_DIRECTORY_CLASH=0
           Disable the warning message which babeltrace2-convert(1) prints when you convert a
           trace with a relative path that’s also the name of a babeltrace2 command.

       BABELTRACE_DEBUG=1
           Legacy variable: equivalent to setting the --log-level option to TRACE.

       BABELTRACE_VERBOSE=1
           Legacy variable: equivalent to setting the --log-level option to INFO.

FILES

       $HOME/.local/lib/babeltrace2/plugins
           User plugin directory.

       /usr/lib/babeltrace2/plugins
           System plugin directory.

       /usr/lib/babeltrace2/plugin-providers
           System plugin provider directory.

EXIT STATUS

       0 on success, 1 otherwise.

BUGS

       If you encounter any issue or usability problem, please report it on the Babeltrace bug
       tracker (see <https://bugs.lttng.org/projects/babeltrace>).

RESOURCES

       The Babeltrace project shares some communication channels with the LTTng project (see
       <https://lttng.org/>).

       •   Babeltrace website (see <https://babeltrace.org/>)

       •   Mailing list (see <https://lists.lttng.org>) for support and development: lttng-
           dev@lists.lttng.org

       •   IRC channel (see <irc://irc.oftc.net/lttng>): #lttng on irc.oftc.net

       •   Bug tracker (see <https://bugs.lttng.org/projects/babeltrace>)

       •   Git repository (see <https://git.efficios.com/?p=babeltrace.git>)

       •   GitHub project (see <https://github.com/efficios/babeltrace>)

       •   Continuous integration (see <https://ci.lttng.org/view/Babeltrace/>)

       •   Code review (see <https://review.lttng.org/q/project:babeltrace>)

AUTHORS

       The Babeltrace 2 project is the result of hard work by many regular developers and
       occasional contributors.

       The current project maintainer is Jérémie Galarneau
       <mailto:jeremie.galarneau@efficios.com>.

COPYRIGHT

       This command is part of the Babeltrace 2 project.

       Babeltrace is distributed under the MIT license (see
       <https://opensource.org/licenses/MIT>).

SEE ALSO

       babeltrace2-intro(7), babeltrace2(1), babeltrace2-convert(1)