Provided by: cme_1.038-2_all bug

NAME

       cme - Check or edit configuration data with Config::Model

VERSION

       version 1.038

SYNOPSIS

         # general synopsis
         cme [ global_options ] command application [ options ] [ file ] [ modification_instructions ]

         # edit dpkg config with GUI (and Config::Model::Dpkg)
         cme edit dpkg

         # read data from arbitrary file (for model read from alternate file)
         cme check dpkg-copyright -file path/to/file

         # edit /etc/sshd_config (with Config::Model::OpenSsh)
         sudo cme edit sshd

         # edit ~/.ssh/config (with Config::Model::OpenSsh)
         cme edit ssh

         # just check the validity of a file. Both commands are equivalent
         cme check multistrap file.conf
         cme check multistrap -file file.conf

         # check dpkg files, update deprecated parameters and save
         cme migrate dpkg

         # like migrate, but also apply all suggested fixes
         cme fix dpkg

         # modify configuration with command line
         cme modify dpkg source 'format="(3.0) quilt"'

         # likewise with an application that accepts file override
         cme modify dpkg-copyright 'Comment="Modified with cme"'

         # edit a file (file name specification is mandatory here)
         cme edit multistrap my.conf

         # map conf data to a fuse file system
         cme fusefs multistrap my.conf -d fuse_dir

         # likewise for dpkg data
         cme fusefs dpkg -d fuse_dir

         # list all available applications (depends on your installation)
         cme list

DESCRIPTION

       Depending on the command described below, "cme" program will use Config::Model
       configuration descriptions to check or modify or fix configuration files.

       The 3rd parameter specify the application you want to work on. Most of the time, the
       relevant configuration file(s) will be found by cme. This is the most simple case. For
       instance:

         sudo cme check popcon

       Some application like "multistrap" have no constraint on the configuration file name and
       will require you to specify your configuration file name:

         cme check multistrap raspbian.conf

       or

         cme check multistrap -file raspbian.conf

Configuration file specification

       The configuration of an application can take different forms. Either several files (like
       debian packages), a single file with a predefined file (popcon), or a single file with an
       arbitrary file name (multistrap).

       When needed the configuration file name is specified as the 3rd command argument, i.e.
       "cme command application file_name". This applies if the application requires a
       configuration file name (like multistrap), or if the application allows configuration file
       override.

Main commands

       This section describes the main commands shipped with cme. Other Config::Model extensions
       can bring more command. Run "cme help" to get the list of available commands on your
       system.

   list
       Show a list all applications where a model is available. This list depends on installed
       Config::Model modules.

   edit
       Edit a configuration. By default, a Tk GUI will be opened If Config::Model::TkUI is
       installed. See App::Cme::Command::edit.

   shell
       Edit the configuration with a shell like interface. See App::Cme::Command::shell.

   check
       Checks the content of the configuration file of an application. See
       App::Cme::Command::check.

   migrate
       Update deprecated parameters (old value are saved to new parameters) and save the new
       configuration. See App::Cme::Command::migrate.

   fix
       Migrate data and fix warnings.  See App::Cme::Command::fix.

   modify
       Modify a configuration file with the values passed on the command line.  See
       App::Cme::Command::modify.

   update
       Update the content of the configuration file from external data.  Currently, only dpkg-
       copyright model support update sub command.  See App::Cme::Command::update.

   search
       Search configuration data for a specific string. See App::Cme::Command::search.

   fusefs
       Map the configuration file content to a FUSE virtual file system on a directory specified
       with option "-fuse-dir". Modifications done in the fuse file system are saved to the
       configuration file when the "fusermount -u" is run.

Global options

       The following options are available for all commands:

       -create
           Perform the operation even if the configuration file is missing. This may be used to
           create a minimal configuration file. This option is disabled by default as a missing
           configuration file often indicates an error during the installation of the
           application.

       -file
           For model that support it, specify an alternate file to read and write the
           configuration.

           You can use this option for model that require the target file to be specified (e.g.
           multitrap model), but file can in this case be also specified with the 4th command
           argument. E.g. these 2 commands have the same effect:

             cme check multistrap foo.conf
             cme check multistrap -file foo.conf

       -force-load
           Load file even if error are found in data. Bad data are discarded

       -canonical
           Write config data back using model order. By default, write items back using the order
           found in the configuration file. This feature is experimental and not supported by all
           backends.

       -backup
           Create a backup of configuration files before saving. By default, "old" will be
           appended to the backup file. I.e. "foo.conf" will be backed up as "foo.conf.old".  You
           can specify an alternate suffix. For instance "-backup dpkg-old".

       -save
           Force a save even if no change was done. Useful to reformat the configuration file.

       -strict
           When set, cme will exit 1 if warnings are found during check (of left after fix)

       -verbose
           Show more information about what's going on.

       -quiet
           Suppress all output except error messages.

Advanced options

       -model-dir
           Specify an alternate directory to find model files. Mostly useful for tests.

       -root-dir
           Specify a pseudo root directory to read and write the configuration files. (Actual
           default directory and file names depends on the model (See "-model" option). For
           instance, if you specify "~/mytest", the "/etc/ssh/sshd_config" files will be written
           in "~/mytest/etc/ssh/" directory.

       -stack-trace
           Provides a full stack trace when exiting on error.

       -try-app-as-model
           When set, try to load a model using directly the application name specified as 3rd
           parameter on the command line. Experimental.

Embedding cme

       You can use cme from another program by using "-ui simple" option. This way you will be
       able to send command on the standard input of "cme" and get the results from the standard
       output.

Logging

       All Config::Model logging is now based on Log::Log4perl.  Logging can be configured in the
       following files:

       •

            ~/.log4config-model

       •

            /etc/log4config-model.conf

       A sample of a ".log4config-model" is provided in contrib directory in "Config::Model"
       distribution of on github <https://github.com/dod38fr/config-
       model/blob/master/contrib/log4config-model>

       Without these files, the following Log4perl config is used:

        log4perl.rootLogger=WARN, Screen
        log4perl.logger.Model.Legacy = INFO, SimpleScreen
        log4perl.additivity.Model.Legacy = 0

        log4perl.appender.Screen        = Log::Log4perl::Appender::Screen
        log4perl.appender.Screen.stderr = 0
        log4perl.appender.Screen.layout = Log::Log4perl::Layout::PatternLayout
        log4perl.appender.Screen.layout.ConversionPattern = %M %m (line %L)%n

        log4perl.appender.SimpleScreen        = Log::Log4perl::Appender::Screen
        log4perl.appender.SimpleScreen.stderr = 0
        log4perl.appender.SimpleScreen.layout = Log::Log4perl::Layout::PatternLayout
        log4perl.appender.SimpleScreen.layout.ConversionPattern = %p: %m%n

        log4perl.oneMessagePerAppender = 1

       Log4perl uses the following categories:

       Anything
       Anything::Change
           Trace change notification through configuration tree and instance.

       Backend
       Backend::Debian::Dpkg
       Backend::Debian::Dpkg::Control
       Backend::Debian::Dpkg::Copyright
       Backend::Fstab
       Backend::IniFile
       Backend::PlainFile
       Backend::ShellVar
       Backend::Yaml
       FuseUI
       Instance
       Loader
       Model::Searcher
       Tree::Element::CheckList
       Tree::Element::Id
       Tree::Element::Id::Hash
       Tree::Element::Id::List
       Tree::Element::Value
       Tree::Element::Value::Dependency
       Tree::Node
       Tree::Node::Warped
       ValueComputer
       Warper
       Iterator
       Model

       More categories will come.

EXIT CODE

       cme exits 0 when no errors are found. Exit 1 otherwise.

BUGS

   Files may be re-ordered
       "cme" imposes a specific ordering of the parameters of a configuration file. This ordering
       is derived from the documentation of the configuration, like ssh_confg. "cme" writes back
       files using this ordering.

       Thus, the diff between the original configuration files and the new version of the file
       may be more important than expected when "cme" is used the first time.

   Comments may be dropped
       Comments are not supported in some applidations (like the one that use YAML in
       configuration files). Comments are dropped when using "cme" to edit or modify such files.
       For more details, see Available backend <https://github.com/dod38fr/config-
       model/wiki/Available-models-and-backends#Available_backend> page.

   Configuration models can lag behind the target application
       If a configuration model is not up-to-date, you will get errors complaining about unknown
       parameters. In such a case, please file a bug on github <https://github.com/dod38fr/cme-
       perl/issues> or fix the model and send a pull request.  You can see this example from
       OpenSsh <https://github.com/dod38fr/config-model/wiki/New-parameter-for-openssh-example>
       to learn how to fix a model.

FOR MORE INFORMATION

       For more information, please check:

       •   config-model wiki: <http://github.com/dod38fr/config-model/wiki>

       •   Blogs about this project: <https://ddumont.wordpress.com/category/perl/configmodel/>

CONTRIBUTORS

       In alphabetical order:

        Ross Vandegrift

FEEDBACKS

       Feedback from users are highly desired. If you find this module useful, please share your
       use cases, success stories with the author.

SEE ALSO

       Config::Model::Model, Config::Model::Instance, Config::Model::Node, Config::Model::HashId,
       Config::Model::ListId, Config::Model::WarpedNode, Config::Model::Value

AUTHOR

       Dominique Dumont

COPYRIGHT AND LICENSE

       This software is Copyright (c) 2014-2022 by Dominique Dumont <ddumont@cpan.org>.

       This is free software, licensed under:

         The GNU Lesser General Public License, Version 2.1, February 1999