Provided by: depthcharge-tools_0.6.2-1_all 
NAME
depthchargectl - Manage the ChromeOS bootloader and its boot images
SYNOPSIS
depthchargectl [options] COMMAND ...
depthchargectl bless [options] [PARTITION | DISK]
depthchargectl build [options] [KERNEL_VERSION]
depthchargectl check [options] IMAGE
depthchargectl config [options] KEY
depthchargectl list [options] [DISK ...]
depthchargectl remove [options] (KERNEL_VERSION | IMAGE)
depthchargectl target [options] [PARTITION | DISK ...]
depthchargectl write [options] [KERNEL_VERSION | IMAGE]
DESCRIPTION
depthchargectl automatically manages the ChromeOS bootloader by building images for the
current board and system, writing them to appropriate ChromeOS kernel partitions,
prioritizing those partitions accordingly, and setting them as successful on boot. When
you have more than one ChromeOS kernel partition, they will be utilized in rotation so
that an unsuccessful boot attempt can revert to the last good version.
The KERNEL_VERSION argument is a distro-specific representation of a kernel and usually is
the latter part of /boot/vmlinuz-VERSION. The IMAGE argument is a boot image for the
ChromeOS bootloader, or a file suspected to be one. DISK should be a physical disk
containing a GPT partition table (e.g. /dev/mmcblk0, /dev/sda), but virtual disks (e.g.
/dev/dm-0) are resolved to such physical disks if possible. PARTITION must be one of
partition devices of a physical disk (e.g /dev/mmcblk0p1, /dev/sda2). The vmlinuz,
initramfs and dtb files are as explained in mkdepthcharge(1).
The program's functionality is divided into subcommands:
depthchargectl bless
Sets bootloader-specific flags for a given partition or the currently booted partition as
detected from the kern_guid=PARTUUID parameter mkdepthcharge(1) adds to the kernel command
line. By default, this marks the partition as successfully booted and the most preferred
one, but can disable the partition or make it boot only on the next attempt as well.
depthchargectl build
Builds a bootable image from the running system for this board, using the latest or a
specific kernel version. depthchargectl keeps a database of known ChromeOS boards and how
to build bootable images for them. For example, it keeps track of which device-tree file
that needs to be included for each ARM board. It also figures out distro-specific
information of where the vmlinuz, initramfs and dtb files are located. It uses this
information and mkdepthcharge(1) to build this image.
It automatically adds an appropriate root=ROOT kernel command line parameter deduced from
/etc/fstab. Higher compression levels for the kernel are automatically tried as necessary,
when the firmware supports them.
depthchargectl config
Retrieves the configured value for a given configuration key, primarily for use in scripts
that integrate depthchargectl with the system upgrade process. Can also query information
about boards.
depthchargectl check
Checks if a file is a depthcharge image that can be booted on this board. depthchargectl
also keeps track of restrictions on images for each board. For example, earlier ChromeOS
board can boot images up to a specific size, e.g. 32MiB. It checks if its input is in a
format the ChromeOS bootloader expects and satisfies these restrictions.
depthchargectl list
Prints a table of ChromeOS kernel partitions and their bootloader specific GPT flags (i.e.
Successful, Priority, Tries). By default, it only searches the physical disks on which the
boot and root partitions reside.
depthchargectl remove
Disables partitions that contain a specific image or a specific kernel version. This is
most useful when you are removing a kernel version and its modules from your system, and
know images built with this kernel will fail to boot from that point on.
depthchargectl target
Chooses and prints the lowest priority, preferably unsuccessful ChromeOS kernel partition
to write a boot image to. By default, searches the same disks as the list subcommand. If a
partition is given, it checks if it is an appropriate for a boot image. Tries to avoid the
currently booted kernel.
depthchargectl write
Writes a specific image or builds and writes a kernel-version image to a partition the
target subcommand returns, and marks it as bootable once on the next boot. The bless
subcommand must be run after a successful boot to make the partiiton permanently bootable,
but that is possible to do automatically with the service files provided with this
package.
OPTIONS
Global options
-h, --help
Show a help message and exit.
-v, --verbose
Print info messages and mkdepthcharge(1) output to stderr.
-V, --version
Print program version and exit.
--root ROOT
Root device or mountpoint of the system to work on. If a mounted device is given,
its mountpoint is used. Defaults to the currently booted system's root.
--root-mountpoint DIR, --boot-mountpoint DIR
Root and boot mountpoints of the system to work on. If not given, deduced from the
--root argument. These are helpful because the --root argument is overloaded by the
build subcommand, which adds it as a kernel command line argument, and it can be
desirable to avoid that while building an image for a chroot.
--tmpdir DIR
Directory to keep temporary files. Normally depthchargectl creates a temporary
directory by itself and removes it when it quits. However, if a temporary directory
is specified with this option any temporary files will be created under it and will
not be deleted.
Configuration options
In addition to its built-in configuration, depthchargectl reads
/etc/depthcharge-tools/config and /etc/depthcharge-tools/config.d/* as configuration files
to make it adaptable to different boards and systems. The following options allow this
configuration to be overridden temporarily.
--config FILE
Additional configuration file to read. This can include changing board properties
or adding new boards, which mostly isn't possible to do with command-line options.
--board CODENAME
Assume depthchargectl is running on the specified board. Normally it tries to
detect which board it's running on primarily based on the HWID of the board set by
the vendor, among other things.
--images-dir DIR
Directory to store and look for built depthcharge images. By default, set to
/boot/depthcharge.
--vboot-keyblock KEYBLOCK
The kernel keyblock file required to sign and verify images. By default,
depthchargectl searches for these keys in /etc/depthcharge-tools and
/usr/share/vboot/devkeys directories.
--vboot-public-key SIGNPUBKEY
The public key required to verify images, in .vbpubk format. By default,
depthchargectl searches for these keys in /etc/depthcharge-tools and
/usr/share/vboot/devkeys directories.
--vboot-private-key SIGNPRIVATE
The private key necessary to sign images, in .vbprivk format. By default,
depthchargectl searches for these keys in /etc/depthcharge-tools and
/usr/share/vboot/devkeys directories.
--kernel-cmdline CMD [CMD ...]
Command-line parameters for the kernel. By default, these are read from
/etc/kernel/cmdline, /usr/lib/kernel/cmdline or /proc/cmdline. depthchargectl and
mkdepthcharge(1) may append some other values to this: an appropriate root=ROOT,
the kern_guid=%U parameter required for the bless subcommand, noinitrd if
--ignore-initramfs is given.
--ignore-initramfs
Do not include initramfs in the built images, ignore the initramfs checks for the
root=ROOT argument, and add noinitrd to the kernel cmdline. If you know that your
OS kernel can boot on this board without an initramfs (perhaps because it has a
built-in one), you can specify this option to build an initramfs-less image.
--zimage-initramfs-hack
Choose which initramfs support hack will be used for the zimage format. Either
set-init-size (the default), pad-vmlinuz for kernels without KASLR, or none if
depthcharge ever gets native support for safely loading zimage initramfs.
depthchargectl bless options
--bad Set the specified partition as unbootable. This sets all three of the Successful,
Priority, Tries flags to 0.
--oneshot
Set the specified partition to be tried once in the next boot. This sets the
Successful flag to 0, Tries flag to 1, and makes sure the Priority flag is the
highest one among all the partitions of the disk the specified one is in.
-i NUM, --partno NUM
Partition number in the given disk image, for when the positional argument is a
disk image instead of a partition block device.
depthchargectl build options
--description DESC
Human-readable description for the image. By default, a string that describes your
system with the specified kernel release name, like "Debian GNU/Linux, with Linux
5.10.0-6-arm64".
--root ROOT
Root device to add to kernel cmdline. By default, this is acquired from /etc/fstab
or a filesystem UUID is derived from the mounted root. If none is passed, no root
parameter is added.
--compress TYPE [TYPE ...]
Compression types to attempt. By default, all compression types that the board
supports based on depthchargectl configuration are attempted from lowest to highest
compression.
--timestamp SECONDS
Build timestamp for the image. By default, SOURCE_DATE_EPOCH is used if it's set.
If not, the modification date of either the initramfs or vmlinuz is used as an
attempt to keep images somewhat reproducible.
-o PATH, --output PATH
Output image to path instead of storing it in the images-dir.
The following options allow one to specify the exact files to be used in building the
image, instead of letting depthchargectl deduce them:
--kernel-release NAME
Release name for the kernel to be used in image filename under the images-dir
(unless --output is specified).
--kernel FILE
Kernel executable. Usually /boot/vmlinuz-VERSION by default, but depends on your
OS.
--initramfs FILE [FILE ...]
Ramdisk image. Usually /boot/initrd.img-VERSION by default, but depends on your OS.
If none is passed, no initramfs is added.
--fdtdir DIR
Directory to search device-tree binaries for the board. Usually /boot/dtbs or a
directory like /usr/lib/linux-image-VERSION, depends on your OS. dtb files in this
dir are searched to find ones matching your board's device-tree compatible string
set in configuration.
--dtbs FILE [FILE ...]
Device-tree binary files to use instead of searching fdtdir.
depthchargectl config options
--section SECTION
Config section to retrieve configured values from. By default, this is the globally
default section: depthcharge-tools.
--default DEFAULT
A default value to return if the given config key doesn't exist in the given config
section. If a default value is not given, this subcommand prints an error message
and exits with nonzero status when the key is missing.
depthchargectl check options
This subcommand takes no specific options.
depthchargectl list options
-a, --all-disks
List partitions on all disks.
-c, --count
Print only the count of partitions.
-n, --noheadings
Don't print column headings.
-o COLUMNS, --output COLUMNS
Comma separated list of columns to output. Supported columns are ATTRIBUTE (or A),
SUCCESSFUL (or S), TRIES (or T), PRIORITY (or P) for ChromeOS GPT flags, PATH for
the partition device (if exists), DISKPATH (or DISK) for the disk device/image the
partition is in, PARTNO for the partition number, and SIZE for the partition size
in bytes.
depthchargectl remove options
-f, --force
Allow disabling the currently booted partition.
depthchargectl target options
-a, --all-disks
Consider all available disks, instead of considering only disks containing the root
and boot partitions.
--allow-current
Allow targeting the currently booted partition.
-s BYTES, --min-size BYTES
Only consider partitions larger than this size in bytes. Defaults to 64 KiB to
ignore unused partitions in ChromeOS installations.
depthchargectl write options
--allow-current
Allow overwriting the currently booted partition.
-f, --force
Write image to disk even if it cannot be verified by the check subcommand.
--no-prioritize
Don't modify ChromeOS GPT flags on the partition. Normally, the flags would be set
to make the system boot from the newly written partition on the next boot.
-t DEVICE, --target DEVICE
Specify a disk or partition device to write to. This device is passed to the target
subcommand to determine where exactly to write to.
EXIT STATUS
In general, exits with zero on success and non-zero on failure. Some subcommands return
more specified exit statuses:
depthchargectl build exit status
0 Image built and stored successfully.
1 An error occurred before or during building the image.
3 Can build an image with an initramfs, but it is too big for the board despite using
maximum allowed kernel compression. This might be solvable by reducing the
initramfs size.
4 Like 3, but without an initramfs or reducing the initramfs size wouldn't make
things fit. This might be solvable by reducing the vmlinuz size, perhaps by
building a custom kernel.
depthchargectl check exit status
0 The image passes all checks.
1 Errors unrelated to image checks.
2 The image isn't a readable file.
3 Size of the image is too big for the board.
4 The image cannot be interpreted by vbutil_kernel(1).
5 The image fails the vbutil_kernel(1) signature checks.
6 The image is built with a wrong format for the board.
7 The image is missing device-tree files compatible with the board.
depthchargectl target exit status
0 A usable partition is given, or a usable partition was chosen from disks. The
partition passes the checks and is printed to output.
1 Errors unrelated to partition checks.
2 The partition is not a writable block device.
3 The disk containing the partition is not a writable block device.
4 Cannot parse a partition number from the partition.
5 The partition is not a ChromeOS kernel partition.
6 The partition is the currently booted partition.
7 The partition is smaller than the --min-size argument.
FILES
/etc/depthcharge-tools
Configuration directory. depthchargectl searches this directory for configuration
files and ChromiumOS verified boot keys.
/etc/depthcharge-tools/config
System configuration file. The "Configuration options" explained above can be set
here to have them as long-term defaults. It's also possible to modify board
properties or add new boards here.
/etc/depthcharge-tools/config.d/*
These files are considered appended to the config file.
/etc/kernel/cmdline, /usr/lib/kernel/cmdline, /proc/cmdline
Files from which depthchargectl may deduce a default kernel command line.
/usr/lib/systemd/system/depthchargectl-bless.service
A systemd service that runs depthchargectl bless on successful boots.
/usr/lib/kernel/install.d/90-depthcharge-tools.install
A systemd kernel-install plugin that can automatically manage your system if
layout=depthcharge-tools is set in /etc/kernel/install.conf.
/etc/init.d/depthchargectl-bless
An init service that runs depthchargectl bless on successful boots.
/usr/share/vboot/devkeys
A directory containing test keys which should have been installed by
vbutil_kernel(1). depthchargectl also searches this directory if no verified boot
keys are set in configuration or found in config directories.
/boot/depthcharge/*.img
The most recently built images for each kernel version.
EXAMPLES
depthchargectl list -n -o PATH
Get a list of partitions depthchargectl will act on by default.
depthchargectl build --board kevin --root /mnt --output depthcharge.img
Build an image for the Samsung Chromebook Plus (v1), using files from and intended
to boot with the chroot system mounted at /mnt.
depthchargectl config board
Print the board codename for the detected board.
depthchargectl config --default False enable-system-hooks
Print the enable-system-hooks config if it's set, False if not. This specific
config key is meant to be a common mechanism which distro packagers can use to let
users disable system upgrade hooks that use depthchargectl.
depthchargectl write --allow-current
Build, check and write an image for the latest kernel-version of this system to
disk while allowing overwriting the currently booted partiiton. You might use this
if you only have a single ChromeOS kernel partition, but broken kernels might make
your system unbootable.
depthchargectl write vmlinux.kpart -t /dev/mmcblk1p1
Write the vmlinux.kpart file to /dev/mmcblk1p1, only if both the image and the
partition are valid. Something of this form would be used for writing images to a
secondary or external disk.
SEE ALSO
mkdepthcharge(1), cgpt(1), vbutil_kernel(1)