Provided by: direwolf_1.6+dfsg-4build1_amd64 bug

NAME

       direwolf - Soundcard TNC for packet radio.

SYNOPSIS

       direwolf [ options ] [ - | udp:9999 ]

       The  first audio channel can be streamed thru stdin or a UDP port.  This is typically used
       with an SDR receiver.

DESCRIPTION

       direwolf  is a software "soundcard" modem/TNC and APRS encoder/decoder.  It  can  be  used
       stand-alone to receive APRS messages, as a digipeater, APRStt gateway, or Internet Gateway
       (IGate).  It can also be used as a virtual TNC for other applications  such  as  APRSIS32,
       UI-View32,  Xastir,  APRS-TW,  YAAC,  UISS,  Linux  AX25,  SARTrack, RMS Express, and many
       others.

OPTIONS

       -c file
              Read configuration file from specified location rather than the default locations.

       -l logdir
              Generate daily log files in specified directory.  Use "." for current directory.

       -L logfile
              Generate single log file with fixed name.

       -r n   Audio sample rate per second for first channel.  Default 44100.

       -n n   Number of audio channels for first device.  1 or 2.  Default 1.

       -b n   Audio sample size for first channel.  8 or 16.  Default 16.

       -B n   Data rate in bits/sec for first channel.  Standard  values  are  300,  1200,  2400,
              4800, 9600.
                     300 bps defaults to AFSK tones of 1600 & 1800.
                     1200 bps uses AFSK tones of 1200 & 2200.
                     2400 bps uses QPSK based on V.26 standard.
                     4800 bps uses 8PSK based on V.27 standard.
                     9600 bps and up uses K9NG/G3RUH standard.
                     AIS for ship Automatic Identification System.
                     EAS for Emergency Alert System (EAS) Specific Area Message Encoding (SAME).

       -g     Force G3RUH modem regardless of data rate.

       -j     2400 bps QPSK compatible with Dire Wolf <= 1.5.

       -J     2400 bps QPSK compatible with MFJ-2400.

       -D n   Divide audio sample by n for first channel.

       -X n   1 to enable FX.25 transmit.

       -d x   Debug options.  Specify one or more of the following in place of x.
                     a = AGWPE network protocol client.
                     k = KISS serial port client.
                     n = Network KISS client.
                     u = Display non-ASCII text in hexadecimal.
                     p = Packet dump in hexadecimal.
                     g = GPS interface.
                     W = Waypoints for position or object reports.
                     t = Tracker beacon.
                     o = Output controls such as PTT and DCD.
                     i = IGate
                     h = Hamlib verbose level.  Repeat for more.
                     m = Monitor heard station list.
                     f = Packet filtering.
                     x = FX.25 increase verbose level.

       -q x   Quiet (suppress output). Specify one or more of the following in place of x.
                     h = Heard line with the audio level.
                     d = Decoding of APRS packets.

       -t n   Text  colors.   0=disabled.  1=default.   2,3,4,...  alternatives.   Use  9 to test
              compatibility with your terminal.

       -p     Enable pseudo terminal for KISS protocol.

       -x     Send Xmit level calibration tones.

       -U     Print UTF-8 test string and exit.

       -S     Print Symbol tables and exit.

       -a n   Report audio device statistics each n seconds.

       -T fmt Time stamp format for sent and received frames.

       -e ber Receive Bit Error Rate (BER), e.g. 1e-5

EXAMPLES

       gqrx (2.3 and later) has the ability to send streaming  audio  through  a  UDP  socket  to
       another  application  for  further  processing.   direwolf can listen over a UDP port with
       options like this:

              direwolf -n 1 -r 48000 -b 16 udp:7355

       Other SDR applications might produce audio on stdout so it is convenient to pipe into  the
       next application.  In this example, the final "-" means read from stdin.

              rtl_fm -f 144.39M -o 4 - | direwolf -n 1 -r 24000 -b 16 -

SEE ALSO

       More       detailed       information      is      in      the      PDF      files      at
       https://github.com/wb2osz/direwolf/tree/master/doc/.

       Applications in this package: aclients, atest, cm108, decode_aprs, direwolf,  gen_packets,
       kissutil, ll2utm, log2gpx, text2tt, tt2text, utm2ll

                                                                                      DIREWOLF(1)