Provided by: qdmr_0.11.2-1build1_amd64 bug

NAME

       dmrconf - Command-line tool for programming DMR radios.

SYNOPSIS

       dmrconf [OPTIONS] [COMMAND] [file]

DESCRIPTION

       dmrconf is a command-line tool to program DMR radios. That is, generating and uploading
       codeplugs to these radios. To this end, dmrconf uses a common human-readable text format
       to describe the codeplug for all supported radios (see below). This allows one to share
       codeplugs between different radios.

       Additionally, dmrconf also allows one to download codeplugs from the radio and to store it
       in the human-readable text format.

COMMANDS

       detect
           Detects a connected radios. You may specify a specific device using the -D or --device
           option.

       read
           Reads a codeplug from the radio and stores it into the given file. This command may
           need the -y or -b options if the file type cannot be inferred from the filename.

       write
           Writes the specified codeplug to the radio. This command may need the -c, -y or -b
           options if the file type cannot be inferred from the filename.

       write-db
           Writes the call-sign database to the device. This command may need the --id option to
           select call-signs if the complete database does not fit into the device. If specified,
           all call-signs closest to the specified ID are used.

       verify
           Verifies the codeplug with the connected radio or the specified radio passed with the
           --radio option. This command may also need the -y or -b options if the file type
           cannot be inferred from the filename.

       encode
           Encodes a YAML codeplug as a binary one for the connected or specified radio using the
           --radio option.

       encode-db
           Encodes the call-sign database as a binary one for the connected or specified radio
           using the --radio option. This command may need the --id option to select call-signs
           if the complete database does not fit into the device. If specified, all call-signs
           closest to the specified ID are used.

       decode
           Decodes a binary codeplug and stores the result in human-readable form. The radio must
           be specified using the --radio option.

       info
           Prints some information about the given file.

OPTIONS

       -c or --csv
           Specifies the file format for the input file for the verify, encode and write
           commands. This option is not needed if the filetype can be inferred from the filename.
           That is, if the file ends on .conf or .csv.

       -y or --yaml
           Specifies the file format for the input or output file for the verify, read and write
           commands. This option is not needed if the filetype can be inferred from the filename.
           That is, if the file ends on .yaml.

       -b or --bin
           Specifies the file format for the input or output file for the verify, read and write
           commands. This option is not needed if the filetype can be inferred from the filename.
           That is, if the file ends on .bin or .dfu.

       -m or --manufacturer
           Specifies the file format for the input file for the decode command to be the
           manufacturer binary codeplug format. Not all manufacturer formats are implemented.

       -D or --device=DEVICE
           Specifies the device to use. Either a USB BUS:DEVICE number combination or the name of
           a serial interface. The device must be specified if the automatic radio detection
           fails or if more than one radio is connected to the host.

       -R or --radio=NAME
           Specifies the radio for the verify, encode or decode commands. This option can also be
           used to override the automatic radio detection for the read and write commands. Be
           careful using this option when writing to the device. An incompatible code-plug might
           be written.

       -I or --id=DMR_ID
           Specifies the DMR ID or a comma separated list of DMR ID prefixes for the write-db or
           encode-db commands. More than one ID may be specified using a comma-separator.

       -n or --limit=N
           Limits several amounts, depending on the context. When encoding or writing the
           call-sign db, this option specifies the maximum number of call-signs to encode.

       --init-codeplug
           Initializes the code-plug from scratch. If omitted (default) the codeplug on the
           device gets updated. This maintains all settings made earlier via the manufacturer CPS
           or on the radio itself.

       --auto-enable-gps
           Automatically enables GPS/APRS if at least one GPS/APRS system is defined and used by
           any channel.

       --auto-enable-roaming
           Automatically enables roaming if at least one roaming zone is defined and used by any
           channel.

       --ignore-limits
           Disables the enforcement of limits. Warnings are still shown.

       -h or --help
           Displays a short help message.

       --list-radios
           Lists all supported radios.

       -v or --version
           Displays the version number.

       -V or --verbose
           Enables debug messages.

SUPPORTED RADIOS

       The following list contains all supported radios and their names for the --radio option.

       opengd77
           All radios running the Open GD77 firmware.

       d868uve, dmr6x2
           Anytone AT-D868UVE or Baofeng DMR-6X2.

       d878uv
           Anytone AT-D878UV.

       d878uv2
           Anytone AT-D878UVII.

       d578uv
           Anytone AT-D578UV.

       md390, rt8
           TYT MD-390 or Retevis RT8.

       uv390, rt3s
           TYT MD-UV390 or Retevis RT3S.

       md2017, rt82
           TYT MD-2017 or Retevis RT82.

       gd77
           Retevis GD-77.

       rd5r
           Baofeng/Radioddity RD-5R.

       dm1701, rt84
           Baofeng DM1701 or Retevis RT84.

BUGS

       This program is still under development and may contain bugs that may cause harm to the
       radios and may even destroy them. Hence you may use this software on your own risk. If you
       want to have guaranties, consider using the CPS (code-plug programming software) supplied
       with your radio.

AUTHOR

       Hannes Matuschek <dm3mat@darc.de>
           Main author