Provided by: elfutils_0.189-4_amd64 bug

NAME

       eu-readelf - Displays information about ELF files.

SYNOPSIS

       eu-readelf [-a|--all]
               [-h|--file-header]
               [-l|--program-headers|--segments]
               [-S|--section-headers|--sections]
               [-g|--section-groups]
               [-e|--exception]
               [--syms|-s|--symbols [section name] ]
               [--dyn-syms]
               [-n|--notes [section name] ]
               [-r|--relocs]
               [-d|--dynamic]
               [-V|--version-info]
               [-A|--arch-specific]
               [-x <number or name>|--hex-dump=<number or name>]
               [-p <number or name>|--string-dump=<number or name>]
               [-z|--decompress]
               [-c|--archive-index]
               [--dwarf-skeleton <file> ]
               [--elf-section [section] ]
               [-w|
                --debug-dump[=line,=decodedline,=info,=info+,=abbrev,=pubnames,=aranges,=macro,=frames,=str,=loc,=ranges,=gdb_index,=addr]]
               [-I|--histogram]
               [-v|--version]
               [-W|--wide]
               [-H|--help]
               elffile...

DESCRIPTION

       eu-readelf displays information about one or more ELF format object files.  The options
       control what particular information to display.

       elffile... are the object files to be examined.  32-bit and 64-bit ELF files are
       supported, as are archives containing ELF files.

       This program performs a similar function to objdump but it goes into more detail and it
       exists independently of the BFD library, so if there is a bug in BFD then readelf will not
       be affected.

OPTIONS

       The long and short forms of options, shown here as alternatives, are equivalent.  At least
       one option in addition to -v or -H must be given.

   ELF Input Selection
       --dwarf-skeleton <file>
           Used with -w to find the skeleton Compile Units in FILE associated with the Split
           Compile units in a .dwo input file.

       --elf-section [section]
           Use the named SECTION (default .gnu_debugdata) as (compressed) ELF input data

   ELF Output Selection
       -a
       --all
           Equivalent to specifying --file-header, --program-headers, --sections, --symbols,
           --relocs, --dynamic, --notes, --version-info, --arch-specific, --section-groups and
           --histogram.

       -h
       --file-header
           Displays the information contained in the ELF header at the start of the file.

       -l
       --program-headers
       --segments
           Displays the information contained in the file's segment headers, if it has any.

       -S
       --sections
       --section-headers
           Displays the information contained in the file's section headers, if it has any.

       -g
       --section-groups
           Displays the information contained in the file's section groups, if it has any.

       -I
       --histogram
           Display a histogram of bucket list lengths when displaying the contents of the symbol
           tables.

       -s
       --syms
       --symbols [section name]
           Displays the entries in symbol table section of the file, if it has one.  If a symbol
           has version information associated with it then this is displayed as well.  The
           version string is displayed as a suffix to the symbol name, preceded by an @
           character.  For example foo@VER_1.  If the version is the default version to be used
           when resolving unversioned references to the symbol then it is displayed as a suffix
           preceded by two @ characters.  For example foo@@VER_2.

       --dyn-syms
           Display (only) the dynamic symbol table.

       -e
       --exception
           Display sections for exception handling.

       -n
       --notes [section name]
           Displays the contents of the NOTE segments and/or sections, if any.

       -r
       --relocs
           Displays the contents of the file's relocation section, if it has one.

       -d
       --dynamic
           Displays the contents of the file's dynamic section, if it has one.

       -V
       --version-info
           Displays the contents of the version sections in the file, it they exist.

       -A
       --arch-specific
           Displays architecture-specific information in the file, if there is any.

   Additional output selection
       -x <name>
       --hex-dump=<name>
           Displays the contents of the indicated section name as a hexadecimal bytes.

       -w
       --debug-dump[=decodedline,=info,=info+,=abbrev,=pubnames,=aranges,=macro,=frames,=str,=loc,=ranges,=gdb_index,=addr]
           Displays the contents of the DWARF debug sections in the file, if any are present.
           Compressed debug sections are automatically decompressed (temporarily) before they are
           displayed.  If one or more of the optional letters or words follows the switch then
           only those type(s) of data will be dumped.  The letters and words refer to the
           following information:
           "=abbrev"
               Displays the contents of the .debug_abbrev section.
           "=addr"
               Displays the contents of the .debug_addr section.
           "=frames"
               Display the raw contents of a .debug_frame section.
           "=gdb_index"
               Displays the contents of the .gdb_index and/or .debug_names sections.
           "=info"
               Displays the contents of the .debug_info section.
           "=info+"
               Displays the contents of the .debug_info section, plus any skeleton unit will be
               immediately followed by the corresponding split compile unit (from the .dwo file).
               To show the difference between "regular" CUs and split CUs print offsets and
               references between { and } instead of [ and ].
           "=decodedline"
               Displays the interpreted contents of the .debug_line section.
           "=macro"
               Displays the contents of the .debug_macro and/or .debug_macinfo sections.
           "=loc"
               Displays the contents of the .debug_loc and/or .debug_loclists sections.
           "=pubnames"
               Displays the contents of the .debug_pubnames and/or .debug_gnu_pubnames sections.
           "=aranges"
               Displays the contents of the .debug_aranges section.
           "=ranges"
               Displays the contents of the .debug_ranges and/or .debug_rnglists sections.
           "=str"
               Displays the contents of the .debug_str, .debug_line_str and/or .debug_str_offsets
               sections.

               Note: displaying the contents of .debug_static_funcs, .debug_static_vars and
               debug_weaknames sections is not currently supported.
           -p <number or name>
           --string-dump=<number or name>
               Displays the contents of the indicated section as printable strings.  A number
               identifies a particular section by index in the section table; any other string
               identifies all sections with that name in the object file.

           -c
           --archive-index
               Displays the file symbol index information contained in the header part of binary
               archives.  Performs the same function as the t command to ar, but without using
               the BFD library.

   Output control
       -z
       --decompress
           Requests that the section(s) being dumped by x, R or p options are decompressed before
           being displayed.  If the section(s) are not compressed then they are displayed as is.

       -v
       --version
           Display the version number of eu-readelf.

       -W
       --wide
           Ignored for compatibility (lines always wide).

       -H
       --help
           Display the command line options understood by eu-readelf.

       @file
           Read command-line options from file.  The options read are inserted in place of the
           original @file option.  If file does not exist, or cannot be read, then the option
           will be treated literally, and not removed.

           Options in file are separated by whitespace.  A whitespace character may be included
           in an option by surrounding the entire option in either single or double quotes.  Any
           character (including a backslash) may be included by prefixing the character to be
           included with a backslash.  The file may itself contain additional @file options; any
           such options will be processed recursively.

SEE ALSO

       objdump(1), readelf(1) and the Info entries for binutils.

COPYRIGHT

       Copyright (c) 1991-2018 Free Software Foundation, Inc.

       Copyright (c) 2019 Red Hat Inc.

       Permission is granted to copy, distribute and/or modify this document under the terms of
       the GNU Free Documentation License, Version 1.3 or any later version published by the Free
       Software Foundation; with no Invariant Sections, with no Front-Cover Texts, and with no
       Back-Cover Texts.  A copy of the license is included in the section entitled "GNU Free
       Documentation License".