Provided by: nmh_1.8-1_amd64 bug

NAME

       inc - incorporate new mail to an nmh folder

SYNOPSIS

       inc [-help] [-version] [+folder] [-audit audit-file] [-noaudit] [-changecur |
            -nochangecur] [-form formfile] [-format string] [-file name] [-silent | -nosilent]
            [-truncate | -notruncate] [-width columns] [-host hostname] [-port portname/number]
            [-user username] [-proxy command] [-sasl | -nosasl] [-saslmech mechanism]
            [-authservice service] [-tls] [-initialtls] [-notls] [-certverify | -nocertverify]
            [-snoop]

DESCRIPTION

       inc incorporates mail from the user's incoming mail drop into an nmh folder.  If the  mail
       drop  is  a file, it can be in mbox or MMDF format.  If the mail drop is a directory it is
       considered to be in Maildir format.

       You may specify which folder to use with +folder.  If no folder  is  specified,  then  inc
       will  use either the folder given by a (non-empty) “Inbox” entry in the user's profile, or
       the folder named “inbox”.  If the specified (or default) folder doesn't  exist,  the  user
       will be queried prior to its creation.

       When the new messages are incorporated into the folder, they are assigned numbers starting
       with the next highest number for the folder.   As  the  messages  are  processed,  a  scan
       listing of the new mail is produced.

       The  newly  created  messages  will have a mode of 0600, see chmod(1), on filesystems that
       support it.  Alternatively, a “Msg-Protect: nnn” profile entry gives the mode to  use,  in
       octal.  For all subsequent operations on these messages, this initially assigned mode will
       be preserved.

       If the switch -audit audit-file is specified (usually as a default switch  in  the  user's
       profile),  then  inc  will  append  a  header line and a line per message to the specified
       audit-file with the format:

            <<inc>> date
            <scan line for first message>
            <scan line for second message>
            <etc.>

       This is useful for keeping track of volume and source of incoming mail.  Eventually, repl,
       forw,  comp, and dist may also output audit information to this (or another) file, perhaps
       with “Message-Id” information to keep an exact correspondence  history.   “Audit-file”  is
       assumed to be in the user's nmh directory unless a full path is specified.

       inc  will  incorporate  even  improperly  formatted  messages  into the user's nmh folder,
       inserting a blank line prior to the offending component and printing a comment identifying
       the bad message.

       In  all  cases,  except  the  use  of -file name (see below), the user's mail drop will be
       zeroed, unless the -notruncate switch is given.

       If the profile entry “Unseen-Sequence” is present and non-empty, then inc will add each of
       the newly incorporated messages to each sequence named in the profile entry.  inc will not
       zero each sequence prior to adding messages.

       The interpretation of the -form formatfile, -format string, and -width columns switches is
       the same as in scan(1).

       By  using  the  -file  name switch, one can direct inc to incorporate messages from a file
       other than the user's mail drop.  Note that the named file will not be zeroed, unless  the
       -truncate switch is given.

       The  -file  switch  does  not  support  the  use of standard input.  Instead, the rcvstore
       command can be used to incorporate mail from the standard input stream.

       If the environment variable $MAILDROP is set, then inc uses it  as  the  location  of  the
       user's  mail  drop  instead  of  the  default (the -file name switch still overrides this,
       however).  If this environment variable is not set, then  inc  will  consult  the  profile
       entry  “MailDrop”  for  this  information.  If the value found is not absolute, then it is
       interpreted relative to the user's nmh directory.  If the value is  not  found,  then  inc
       will look in the standard system location for the user's mail drop.

       The  -silent  switch  directs  inc  to be quiet and not ask any questions at all.  This is
       useful for putting inc in the background and going on to other things.

   Using POP
       inc will normally check local mail drops for mail, as covered above.  But  if  the  option
       “pophost”  is  set  in  “mts.conf”,  or  if  the -host hostname switch is given, or if the
       $MAILHOST environment variable is set, then inc will query this POP service host for  mail
       to  incorporate.   If  $MAILHOST  is  set and -host is specified as well, the command-line
       switch will override the environment variable.  The -port switch specifies the  port  name
       or number used to connect to the POP server.  If unspecified, the default is “pop3”.

       To  specify  a  username  for  authentication  with the POP server, use the -user username
       switch.  The credentials profile entry in mh-profile(5) describes the  ways  to  supply  a
       username and password.

       If  passed  the -proxy command switch, inc will use the specified command to establish the
       connection to the POP server.  The string %h in the command will  be  substituted  by  the
       hostname to connect to.

       For  debugging  purposes,  you may give the switch -snoop, which will allow you to monitor
       the POP transaction.  If -sasl -saslmech xoauth2 is used, the  HTTP  transaction  is  also
       shown.

       If  nmh  has been compiled with SASL support, the -sasl switch will enable the use of SASL
       authentication.  Depending on the SASL mechanism used,  this  may  require  an  additional
       password  prompt  from the user (but the netrc file can be used to store this password, as
       described in mh-profile(5)).  The -saslmech switch can be used to select a particular SASL
       mechanism.

       If  SASL  authentication is successful, inc will attempt to negotiate a security layer for
       session encryption.  Encrypted traffic is labelled with  `(encrypted)'  and  `(decrypted)'
       when  viewing  the  POP  transaction  with the -snoop switch; see post(8)'s description of
       -snoop for its other features.

       If nmh has been compiled with OAuth support, the -sasl and -saslmech xoauth2 switches will
       enable  OAuth authentication.  The -user switch must be used, and the user-name must be an
       email address the user has for the service, which must be specified with the  -authservice
       service  switch.   Before  using  this, the user must authorize nmh by running mhlogin and
       granting authorization to that account.  See mhlogin(1) for more details.

       If nmh has been compiled with TLS support, the -tls and -initialtls switches will  require
       the  negotiation  of  TLS  when  connecting to the remote POP server. The -tls switch will
       direct inc to negotiate TLS as part of the normal POP protocol  using  the  STLS  command.
       The  -initialtls  switch will direct inc to negotiate TLS immediately after the connection
       has taken place, before any POP commands are sent or received.  Data encrypted by  TLS  is
       labeled  `(tls-encrypted)' and `(tls-decrypted)' when viewing the POP transaction with the
       -snoop switch.  The -notls switch will disable all attempts to negotiate TLS.

       When using TLS the default is to verify the remote certificate and SubjectName against the
       local  trusted  certificate  store.   This  can  be  controlled  by  the  -certverify  and
       -nocertverify  switches.   See  your  OpenSSL  documentation  for  more   information   on
       certificate verification.

FILES

       $HOME/.mh_profile   The user's profile.
       /etc/nmh/mts.conf   mts configuration file.
       /var/mail/$USER     Location of the system mail drop.

PROFILE COMPONENTS

       Path:               To determine the user's nmh directory.
       Alternate-Mailboxes:
                           To determine the user's mailboxes.
       Inbox:              To determine the inbox.
       Folder-Protect:     To set mode when creating a new folder.
       Msg-Protect:        To set mode when creating a new message and audit-file.
       Unseen-Sequence:    To name sequences denoting unseen messages.

SEE ALSO

       mhmail(1), scan(1), mh-mail(5), mh-profile(5), mhlogin(1), post(8), rcvstore(1)

DEFAULTS

       +folder             defaulted by “Inbox” above.
       -noaudit
       -changecur
       -format             As described above.
       -nosilent
       -nosasl
       -notruncate         Unless -file name is given.
       -width              The width of the terminal.

CONTEXT

       The folder into which messages are being incorporated will become the current folder.  The
       first message incorporated will become the current message, unless the -nochangecur option
       is specified.  This leaves the context ready for a show of the first new message.