Provided by: libmbim-utils_1.28.4-2_amd64 bug

NAME

       mbimcli - Control MBIM devices

DESCRIPTION

   Usage:
              mbimcli [OPTION?] - Control MBIM devices

   Help Options:
       -h, --help
              Show help options

       --help-all
              Show all help options

       --help-basic-connect
              Show Basic Connect Service options

       --help-phonebook
              Show Phonebook Service options

       --help-dss
              Show Device Service Stream options

       --help-ms-firmware-id
              Show Microsoft Firmware ID Service options

       --help-ms-host-shutdown
              Show Microsoft Host Shutdown Service options

       --help-ms-sar
              Show Microsoft SAR Service options

       --help-atds
              Show AT&T Device Service options

       --help-intel-firmware-update
              Show Intel Firmware Update Service options

       --help-ms-basic-connect-extensions
              Show Microsoft Basic Connect Extensions Service options

       --help-quectel
              Show Quectel Service options

       --help-link-management
              Show link management specific options

       --help-intel-thermal-rf
              Show Intel Thermal RF Service options

       --help-ms-voice-extensions
              Show Microsoft Voice Extensions Service options

       --help-ms-uicc-low-level-access
              Show Microsoft UICC Low Level Access Service options

   Basic Connect options:
       --query-device-caps
              Query device capabilities

       --query-subscriber-ready-status
              Query subscriber ready status

       --query-radio-state
              Query radio state

       --set-radio-state=[(on|off)]
              Set radio state

       --query-device-services
              Query device services

       --query-pin-state
              Query PIN state

       --enter-pin=[(PIN type),(current PIN)]
              Enter   PIN   (PIN   type   is   optional,   defaults  to  PIN1,  allowed  options:
              (pin1,network-pin,network-subset-pin,service-provider-pin,corporate-pin)

       --change-pin=[(current PIN),(new PIN)]
              Change PIN

       --enable-pin=[(current PIN)]
              Enable PIN

       --disable-pin=[(PIN type),(current PIN)]
              Disable PIN (PIN type is optional, see enter-pin for details)

       --enter-puk=[(PUK type),(PUK),(new PIN)]
              Enter  PUK  (PUK  type  is   optional,   defaults   to   PUK1,   allowed   options:
              (puk1,network-puk,network-subset-puk,service-provider-puk,corporate-puk)

       --query-pin-list
              Query PIN list

       --query-home-provider
              Query home provider

       --query-preferred-providers
              Query preferred providers

       --query-visible-providers
              Query visible providers

       --query-registration-state
              Query registration state

       --register-automatic
              Launch automatic registration

       --query-signal-state
              Query signal state

       --query-packet-service-state
              Query packet service state

       --attach-packet-service
              Attach to the packet service

       --detach-packet-service
              Detach from the packet service

       --query-connection-state=[SessionID]
              Query connection state (SessionID is optional, defaults to 0)

       --connect=["key=value,..."]
              Connect   (allowed   keys:  session-id,  access-string,  ip-type,  auth,  username,
              password, compression, context-type)

       --query-ip-configuration=[SessionID]
              Query IP configuration (SessionID is optional, defaults to 0)

       --disconnect=[SessionID]
              Disconnect (SessionID is optional, defaults to 0)

       --query-packet-statistics
              Query packet statistics

       --query-ip-packet-filters=[SessionID]
              Query IP packet filters (SessionID is optional, defaults to 0)

       --set-ip-packet-filters=["key=value,..."]
              Set IP  packet  filters  (allowed  keys:  session-id,  packet-filter,  packet-mask,
              filter-id)

       --query-provisioned-contexts
              Query provisioned contexts

       --set-provisioned-contexts=["key=value,..."]
              Set   provisioned   contexts   (allowed   keys:   context-id,  context-type,  auth,
              compression, username, password, access-string, provider-id)

       --set-signal-state=["key=value,..."]
              Set  signal  state   (allowed   keys:   signal-strength-interval,   rssi-threshold,
              error-rate-threshold)

       --set-network-idle-hint=[(enabled|disabled)]
              Set network idle hint

       --query-network-idle-hint
              Query network idle hint

       --set-emergency-mode=[(on|off)]
              Set emergency mode

       --query-emergency-mode
              Query emergency mode

       --set-service-activation=[Data]
              Set service activation

   Phonebook options:
       --phonebook-query-configuration
              Query the phonebook configuration

       --phonebook-read=[(Phonebook index)]
              Read phonebook entry with given index

       --phonebook-read-all
              Read all phonebook entries

       --phonebook-write=[(Name),(Number)[,(Index)]]
              Add new phonebook entry or update an existing one

       --phonebook-delete=[(Phonebook index)]
              Delete phonebook entry with given index

       --phonebook-delete-all
              Delete all phonebook entries

   Device Service Stream options:
       --dss-connect=[(UUID),(Session ID)]
              Connect DSS session

       --dss-disconnect=[(UUID),(Session ID)]
              Disconnect DSS session

   Microsoft Firmware ID options:
       --ms-query-firmware-id
              Query firmware ID

   Microsoft Host Shutdown options:
       --ms-notify-host-shutdown
              Notify that host is shutting down

   Microsoft SAR options:
       --ms-set-sar-config=[(device|os),(enabled|disabled)[,[{antenna_index,backoff_index}...]]]
              Set SAR config

       --ms-query-sar-config
              Query SAR config

       --ms-set-transmission-status=[(enabled|disabled),(timer)]
              Set transmission status and hysteresis timer (in seconds)

       --ms-query-transmission-status
              Query transmission status

   AT&T Device Service options:
       --atds-query-signal
              Query signal info

       --atds-query-location
              Query cell location

   Intel Firmware Update Service options:
       --intel-modem-reboot=[(Boot Mode),(Timeout)]
              Reboot modem. Boot mode and timeout arguments only required if MBIMEx >= 2.0.

   Microsoft Basic Connect Extensions options:
       --ms-query-pco=[SessionID]
              Query PCO value (SessionID is optional, defaults to 0)

       --ms-query-lte-attach-configuration
              Query LTE attach configuration

       --ms-query-lte-attach-info
              Query LTE attach status information

       --ms-query-sys-caps
              Query system capabilities

       --ms-query-device-caps
              Query device capabilities

       --ms-query-slot-info-status=[SlotIndex]
              Query slot information status

       --ms-set-device-slot-mappings=[(SlotIndex)[,(SlotIndex)[,...]]]
              Set device slot mappings for each executor

       --ms-query-device-slot-mappings
              Query device slot mappings

       --ms-query-location-info-status
              Query location info status

       --ms-set-provisioned-contexts=["key=value,..."]
              Set  provisioned  contexts  (allowed keys: operation, context-type, ip-type, state,
              roaming-control,  media-type,  source,  auth,  compression,   username,   password,
              access-string)

       --ms-query-provisioned-contexts
              Query provisioned contexts

       --ms-query-base-stations-info
              Query base stations info

       --ms-query-version=[(MBIM version),(MBIM extended version)]
              Exchange supported version information. Since MBIMEx v2.0.

       --ms-query-registration-parameters
              Query registration parameters. Since MBIMEx v3.0.

       --ms-set-registration-parameters=["key=value,..."]
              Set  registration  parameters  (required  keys:  mico-mode,  drx-cycle,  ladn-info,
              default-pdu-activation-hint, re-register-if-needed). Since MBIMEx v3.0.

       --ms-query-modem-configuration
              Query modem configuration. Since MBIMEx v3.0.

       --ms-query-wake-reason
              Query wake reason. Since MBIMEx v3.0.

   Quectel options:
       --quectel-query-radio-state
              Query radio state

       --quectel-set-radio-state=[(on)]
              Set radio state

   Link management options:
       --link-list=[IFACE]
              List links created from a given interface

       --link-add=[iface=IFACE,prefix=PREFIX[,session-id=N]]
              Create new network interface link

       --link-delete=IFACE
              Delete a given network interface link

       --link-delete-all=[IFACE]
              Delete all network interface links from the given interface

   Intel Thermal RF Service options:
       --intel-query-rfim
              Query RFIM frequency information

       --intel-set-rfim=[(on|off)]
              Enable or disable RFIM (disabled by default)

   Microsoft Voice Extensions Service options:
       --ms-query-nitz
              Query network identity and time zone

   Microsoft UICC Low Level Access Service options:
       --ms-query-uicc-application-list
              Query UICC application list

       --ms-query-uicc-file-status=["key=value,..."]
              Query UICC file status (allowed keys: application-id, file-path)

       --ms-query-uicc-read-binary=["key=value,..."]
              Read UICC  binary  file  (allowed  keys:  application-id,  file-path,  read-offset,
              read-size, local-pin and data)

       --ms-query-uicc-read-record=["key=value,..."]
              Read  UICC  record  file  (allowed  keys: application-id, file-path, record-number,
              local-pin and data)

       --ms-set-uicc-open-channel=["key=value,..."]
              Set UICC open channel (allowed keys: application-id, selectp2arg, channel-group)

       --ms-set-uicc-close-channel=["key=value,..."]
              Set UICC close channel (allowed keys: channel, channel-group)

       --ms-query-uicc-atr
              Query UICC atr

       --ms-set-uicc-apdu=["key=value,..."]
              Set UICC apdu (allowed keys: channel, secure-message, classbyte-type, command)

       --ms-set-uicc-reset=[(Pass Through Action)]
              Set UICC reset

       --ms-query-uicc-reset
              Query UICC reset

       --ms-set-uicc-terminal-capability=["key=value,..."]
              Set UICC terminal capability (allowed keys: terminal-capability)

       --ms-query-uicc-terminal-capability
              Query UICC terminal capability

   Application Options:
       -d, --device=[PATH]
              Specify device path

       -p, --device-open-proxy
              Request to use the 'mbim-proxy' proxy

       --device-open-ms-mbimex-v2
              Request to enable Microsoft MBIMEx v2.0 support

       --device-open-ms-mbimex-v3
              Request to enable Microsoft MBIMEx v3.0 support

       --no-open=[Transaction ID]
              Do not explicitly open the MBIM device before running the command

       --no-close
              Do not close the MBIM device after running the command

       --noop Don't run any command

       -v, --verbose
              Run action with verbose logs, including the debug ones

       --verbose-full
              Run action with verbose logs, including the debug ones and personal info

       --silent
              Run action with no logs; not even the error/warning ones

       -V, --version
              Print version

COPYRIGHT

       Copyright © 2013-2021 Aleksander Morgado License  GPLv2+:  GNU  GPL  version  2  or  later
       <http://gnu.org/licenses/gpl-2.0.html>
       This  is free software: you are free to change and redistribute it.  There is NO WARRANTY,
       to the extent permitted by law.

SEE ALSO

       The full documentation for mbimcli is maintained as a Texinfo manual.   If  the  info  and
       mbimcli programs are properly installed at your site, the command

              info mbimcli

       should give you access to the complete manual.