Provided by: openssl_3.0.10-1ubuntu2.3_amd64 bug

NAME

       openssl-pkcs8 - PKCS#8 format private key conversion command

SYNOPSIS

       openssl pkcs8 [-help] [-topk8] [-inform DER|PEM] [-outform DER|PEM] [-in filename]
       [-passin arg] [-out filename] [-passout arg] [-iter count] [-noiter] [-nocrypt]
       [-traditional] [-v2 alg] [-v2prf alg] [-v1 alg] [-scrypt] [-scrypt_N N] [-scrypt_r r]
       [-scrypt_p p] [-rand files] [-writerand file] [-engine id] [-provider name]
       [-provider-path path] [-propquery propq]

DESCRIPTION

       This command processes private keys in PKCS#8 format. It can handle both unencrypted
       PKCS#8 PrivateKeyInfo format and EncryptedPrivateKeyInfo format with a variety of PKCS#5
       (v1.5 and v2.0) and PKCS#12 algorithms.

OPTIONS

       -help
           Print out a usage message.

       -topk8
           Normally a PKCS#8 private key is expected on input and a private key will be written
           to the output file. With the -topk8 option the situation is reversed: it reads a
           private key and writes a PKCS#8 format key.

       -inform DER|PEM, -outform DER|PEM
           The input and formats; the default is PEM.  See openssl-format-options(1) for details.

           If a key is being converted from PKCS#8 form (i.e. the -topk8 option is not used) then
           the input file must be in PKCS#8 format. An encrypted key is expected unless -nocrypt
           is included.

           If -topk8 is not used and PEM mode is set the output file will be an unencrypted
           private key in PKCS#8 format. If the -traditional option is used then a traditional
           format private key is written instead.

           If -topk8 is not used and DER mode is set the output file will be an unencrypted
           private key in traditional DER format.

           If -topk8 is used then any supported private key can be used for the input file in a
           format specified by -inform. The output file will be encrypted PKCS#8 format using the
           specified encryption parameters unless -nocrypt is included.

       -traditional
           When this option is present and -topk8 is not a traditional format private key is
           written.

       -in filename
           This specifies the input filename to read a key from or standard input if this option
           is not specified. If the key is encrypted a pass phrase will be prompted for.

       -passin arg, -passout arg
           The password source for the input and output file.  For more information about the
           format of arg see openssl-passphrase-options(1).

       -out filename
           This specifies the output filename to write a key to or standard output by default. If
           any encryption options are set then a pass phrase will be prompted for. The output
           filename should not be the same as the input filename.

       -iter count
           When creating new PKCS#8 containers, use a given number of iterations on the password
           in deriving the encryption key for the PKCS#8 output.  High values increase the time
           required to brute-force a PKCS#8 container.

       -noiter
           When creating new PKCS#8 containers, use 1 as iteration count.

       -nocrypt
           PKCS#8 keys generated or input are normally PKCS#8 EncryptedPrivateKeyInfo structures
           using an appropriate password based encryption algorithm. With this option an
           unencrypted PrivateKeyInfo structure is expected or output.  This option does not
           encrypt private keys at all and should only be used when absolutely necessary. Certain
           software such as some versions of Java code signing software used unencrypted private
           keys.

       -v2 alg
           This option sets the PKCS#5 v2.0 algorithm.

           The alg argument is the encryption algorithm to use, valid values include aes128,
           aes256 and des3. If this option isn't specified then aes256 is used.

       -v2prf alg
           This option sets the PRF algorithm to use with PKCS#5 v2.0. A typical value value
           would be hmacWithSHA256. If this option isn't set then the default for the cipher is
           used or hmacWithSHA256 if there is no default.

           Some implementations may not support custom PRF algorithms and may require the
           hmacWithSHA1 option to work.

       -v1 alg
           This option indicates a PKCS#5 v1.5 or PKCS#12 algorithm should be used.  Some older
           implementations may not support PKCS#5 v2.0 and may require this option.  If not
           specified PKCS#5 v2.0 form is used.

       -scrypt
           Uses the scrypt algorithm for private key encryption using default parameters:
           currently N=16384, r=8 and p=1 and AES in CBC mode with a 256 bit key. These
           parameters can be modified using the -scrypt_N, -scrypt_r, -scrypt_p and -v2 options.

       -scrypt_N N, -scrypt_r r, -scrypt_p p
           Sets the scrypt N, r or p parameters.

       -rand files, -writerand file
           See "Random State Options" in openssl(1) for details.

       -engine id
           See "Engine Options" in openssl(1).  This option is deprecated.

       -provider name
       -provider-path path
       -propquery propq
           See "Provider Options" in openssl(1), provider(7), and property(7).

NOTES

       By default, when converting a key to PKCS#8 format, PKCS#5 v2.0 using 256 bit AES with
       HMAC and SHA256 is used.

       Some older implementations do not support PKCS#5 v2.0 format and require the older PKCS#5
       v1.5 form instead, possibly also requiring insecure weak encryption algorithms such as 56
       bit DES.

       Private keys encrypted using PKCS#5 v2.0 algorithms and high iteration counts are more
       secure that those encrypted using the traditional SSLeay compatible formats. So if
       additional security is considered important the keys should be converted.

       It is possible to write out DER encoded encrypted private keys in PKCS#8 format because
       the encryption details are included at an ASN1 level whereas the traditional format
       includes them at a PEM level.

PKCS#5 V1.5 AND PKCS#12 ALGORITHMS

       Various algorithms can be used with the -v1 command line option, including PKCS#5 v1.5 and
       PKCS#12. These are described in more detail below.

       PBE-MD2-DES PBE-MD5-DES
           These algorithms were included in the original PKCS#5 v1.5 specification.  They only
           offer 56 bits of protection since they both use DES.

       PBE-SHA1-RC2-64, PBE-MD2-RC2-64, PBE-MD5-RC2-64, PBE-SHA1-DES
           These algorithms are not mentioned in the original PKCS#5 v1.5 specification but they
           use the same key derivation algorithm and are supported by some software. They are
           mentioned in PKCS#5 v2.0. They use either 64 bit RC2 or 56 bit DES.

       PBE-SHA1-RC4-128, PBE-SHA1-RC4-40, PBE-SHA1-3DES, PBE-SHA1-2DES, PBE-SHA1-RC2-128,
       PBE-SHA1-RC2-40
           These algorithms use the PKCS#12 password based encryption algorithm and allow strong
           encryption algorithms like triple DES or 128 bit RC2 to be used.

EXAMPLES

       Convert a private key to PKCS#8 format using default parameters (AES with 256 bit key and
       hmacWithSHA256):

        openssl pkcs8 -in key.pem -topk8 -out enckey.pem

       Convert a private key to PKCS#8 unencrypted format:

        openssl pkcs8 -in key.pem -topk8 -nocrypt -out enckey.pem

       Convert a private key to PKCS#5 v2.0 format using triple DES:

        openssl pkcs8 -in key.pem -topk8 -v2 des3 -out enckey.pem

       Convert a private key to PKCS#5 v2.0 format using AES with 256 bits in CBC mode and
       hmacWithSHA512 PRF:

        openssl pkcs8 -in key.pem -topk8 -v2 aes-256-cbc -v2prf hmacWithSHA512 -out enckey.pem

       Convert a private key to PKCS#8 using a PKCS#5 1.5 compatible algorithm (DES):

        openssl pkcs8 -in key.pem -topk8 -v1 PBE-MD5-DES -out enckey.pem

       Convert a private key to PKCS#8 using a PKCS#12 compatible algorithm (3DES):

        openssl pkcs8 -in key.pem -topk8 -out enckey.pem -v1 PBE-SHA1-3DES

       Read a DER unencrypted PKCS#8 format private key:

        openssl pkcs8 -inform DER -nocrypt -in key.der -out key.pem

       Convert a private key from any PKCS#8 encrypted format to traditional format:

        openssl pkcs8 -in pk8.pem -traditional -out key.pem

       Convert a private key to PKCS#8 format, encrypting with AES-256 and with one million
       iterations of the password:

        openssl pkcs8 -in key.pem -topk8 -v2 aes-256-cbc -iter 1000000 -out pk8.pem

STANDARDS

       Test vectors from this PKCS#5 v2.0 implementation were posted to the pkcs-tng mailing list
       using triple DES, DES and RC2 with high iteration counts, several people confirmed that
       they could decrypt the private keys produced and therefore, it can be assumed that the
       PKCS#5 v2.0 implementation is reasonably accurate at least as far as these algorithms are
       concerned.

       The format of PKCS#8 DSA (and other) private keys is not well documented: it is hidden
       away in PKCS#11 v2.01, section 11.9. OpenSSL's default DSA PKCS#8 private key format
       complies with this standard.

BUGS

       There should be an option that prints out the encryption algorithm in use and other
       details such as the iteration count.

SEE ALSO

       openssl(1), openssl-dsa(1), openssl-rsa(1), openssl-genrsa(1), openssl-gendsa(1)

HISTORY

       The -iter option was added in OpenSSL 1.1.0.

       The -engine option was deprecated in OpenSSL 3.0.

COPYRIGHT

       Copyright 2000-2021 The OpenSSL Project Authors. All Rights Reserved.

       Licensed under the Apache License 2.0 (the "License").  You may not use this file except
       in compliance with the License.  You can obtain a copy in the file LICENSE in the source
       distribution or at <https://www.openssl.org/source/license.html>.