Provided by: pdf-presenter-console_4.6.0-3_amd64 bug

NAME

       pdfpc - PDF presenter console with multi-monitor support

SYNOPSIS

       pdfpc [options] PDF-file

DESCRIPTION

       pdfpc  is  a GTK-based presentation viewer which uses Keynote-like multi-monitor output to
       provide meta information to the speaker during the presentation. It  is  able  to  show  a
       normal  presentation  window  on one screen while showing a more sophisticated overview on
       the other one, providing information like a picture of the next slide, as well as the time
       left in the presentation. pdfpc processes PDF documents, which can be created using nearly
       all modern presentation software.

       By default the presenter view appears in the primary monitor and the presentation view  in
       the second monitor (provided you have two monitors).

OPTIONS

       -B, --list-bindings
              List action bindings defined

       -C, --time-of-day
              Display the time of the day

       -d, --duration=N
              Duration  in minutes of the presentation used for timer display. If not given or if
              a value of 0 is specified, the clock just measures the time in the presentation.

       -e, --end-time=T
              End time of the presentation. (Format: HH:MM (24h))

       -f, --note-format=FORMAT
              Enforce format of notes (plain or markdown. Default: markdown)

       -g, --disable-auto-grouping
              Disable auto detection of overlay groups. (Default: enabled)

       -h, --help
              Show this help

       -l, --last-minutes=N
              In the old timer mode (see Timer below), defines time in minutes before the end  of
              the talk when the timer changes its color.  (Default: 5 minutes)

       -L, --list-actions
              List actions supported

       -M, --list-monitors
              List monitors known to the operating system

       -n, --notes=P
              Position  of  second-screen beamer notes on the PDF page (left, right, top, bottom,
              or none. Default: none). Note that this disables slide auto-grouping.

       -N, --no-install
              Allow for testing pdfpc without proper installation.  Icons,  configuration  files,
              etc. will be loaded from the source path locations. Mostly intended for developers.

       -p, --rest-port
              Port the REST server binds to. (Default: 8088)

       -P, --page
              Go  to a specific page directly after startup. In case of overlays, the first slide
              will be displayed.

       -r, --page-transition=TRANSITION
              Set  default  page  transition.  The  TRANSITION  specification  is  of  the   form
              type[:duration[:angle[:alignment[:direction]]]].  See  the Page transitions section
              for the list of supported types. duration is in seconds and set to  1  by  default.
              The  accepted  values  for angle are 0/90/180/270; alignment can be h[orizontal] of
              v[ertical] and direction i[nward] or o[utward]. The last  three  optional  settings
              are  meaningless  for some of the transition types and can be left empty. Examples:
              "push", "dissolve:1.5", "wipe:1:90", "split:1::vertical:outward".

       -R, --pdfpc-location=LOCATION
              Use custom pdfpc file.

       -s, --switch-screens
              Switch the presentation and the presenter screen.

       -S, --single-screen
              Force to use only one screen

       -t, --start-time=T
              Start time of the presentation to be used as a countdown. (Format: HH:MM (24h))

       -T, --enable-auto-srt-load
              Try loading video subtitle files automatically. For each video  media,  pdfpc  will
              append  ".srt"  to  the  media  URI and attempt to load a subtitle file (in the SRT
              format) from that location.

       -V, --enable-rest-server
              Enable REST server for remote control of pdfpc.

       -W, --wayland-workaround
              Enable Wayland-specific workaround. This might fix HiDPI scaling problems.

       -w, --windowed=MODE
              Run in the given windowed mode (presenter|presentation|both|none). The default mode
              is "presenter" (only the presentation window is fullscreen).

       -X, --external-script=FILENAME
              Specify a script to be executed with the 'X' (Shift+x) key during the presentation.
              The script must be executable but can otherwise be written  in  any  language.  The
              script is called with the following command line arguments:

              • Name of pdf file
              • Total slide count
              • Current slide number
              • Current user slide number

              If  the  script  exits  with  a non-zero return value, whatever the script wrote to
              stdout is printed in the console. Otherwise nothing is printed.

       -Z, --size
              Size of the presentation window in width:height format (forces windowed mode)

       -1, --presenter-screen=MONITOR
              Monitor to be used for the presenter screen (see the -M option).

       -2, --presentation-screen=MONITOR
              Monitor to be used for the presentation screen (see the -M option).

KEYBINDINGS

       These are the default keybindings for pdfpc:

       Right cursor key / Down cursor key / Page down / Return / Space / 1st mouse button / Mouse
       wheel down
              Go forward one slide

       Left cursor key / Up cursor key / Page up / Backspace / 3rd mouse button / Mouse wheel up
              Go back one slide

       Shift + Page down
              Go forward one user slide (see Overlays below)

       Shift + Page up
              Go back one user slide (see Overlays below)

       Shift + Right cursor key / 1st mouse button / Mouse wheel down
              Go forward 10 slides

       Shift + Left cursor key / 3rd mouse button / Mouse wheel up
              Go back 10 slides

       Shift + n
              Go forward 1 slide irrespectively of its "hidden" attribute

       Shift + p
              Go backward 1 slide irrespectively of its "hidden" attribute

       Home   Go to the first slide

       End    Go to the last slide

       Shift + Backspace / Shift + Space
              Go back /forward in history.

       Shift + Home / Shift + End
              Go  to  the  previous  /  next slide, skipping over overlays that have already been
              viewed, but at most one user slide.

       Tab / 2nd mouse button
              Overview mode

       g      Input a slide number to jump to

       m      Bookmark the current slide and store it in the .pdfpc file for later usage

       Shift + m
              Load the bookmarked slide which was saved with m before

       t      Toggle the toolbox

       1 / KP_1
              Switch to the normal mode (pen/eraser and pointer are off)

       2 / KP_2
              Switch the pointer mode on

       3 / KP_3
              Switch the pen drawing mode on

       4 / KP_4
              Switch the eraser drawing mode on

       5 / KP_5
              Switch the spotlight mode on

       Plus / KP_Add / Equal
              Depending on the current mode, increase font size of notes or pointer size  or  the
              size of pen or eraser or spotlight

       Minus / KP_Subtract
              Depending  on  the current mode, decrease font size of notes or pointer size or the
              size of pen or eraser

       c      Clear the drawing on the current page

       d      Toggle visibility of the drawings; if in the drawing mode (pen/eraser), exit it

       f      Freeze the current presentation display  (the  presenter  display  is  still  fully
              active)

       w      Toggle between the fullscreen and windowed mode of the presenter screen

       Shift + a
              Maximize/unmaximize  the  current  slide  view  (e.g.,  to  increase accuracy while
              drawing)

       b      Turn off the presentation view (i.e.  fill it with a black color)

       h      Hide the presentation window (i.e. make other windows on the other screen visible)

       Escape Exit any "special" state (pause, freeze, blank)

       Ctrl + n
              Edit notes for the current slide (press Escape to exit this mode)

       Ctrl + z
              In drawing and eraser mode, undo the last added stroke or erase curve.

       Ctrl + y
              In drawing and eraser mode, redo the last undone stroke or erase curve.

       s      Start timer

       p      Pause/continue timer

       Shift + t
              Cycle between the  timer  view  modes  (count  up/count  down/current  time),  when
              applicable

       Ctrl + t
              Reset timer

       Ctrl + o
              Toggle the overlay flag for one particular slide (see Overlays below)

       Ctrl + h
              Toggle the hidden attribute for the current slide (see Hidden slides below)

       Ctrl + e
              Define end slide

       Ctrl + r
              Reload the presentation (e.g., if the PDF file has been updated)

       Ctrl + q
              Exit pdfpc

       ?      Show  a cheat sheet with the keyboard and mouse bindings; press Escape or Return to
              exit it

       Within the overview mode, the following key bindings are used:

       Return / 1st mouse button
              Go to currently selected page (last page of overlay)

       Shift + Return / Shift + 1st mouse button
              Go to currently selected page (first page of overlay)

       Cursor left / Page up
              Select previous slide

       Cursor right / Page down
              Select next slide

       See pdfpcrc(5) if you want to customize the key or mouse  bindings.  Please  note  though,
       that only in the normal mode the mouse bindings are configurable.

FEATURES

   Caching / Pre-rendering
       To  allow  fast changes between the presentation slides, the PDF pages are pre-rendered to
       memory.  The progress bar on the bottom of the presenter screen indicates how many percent
       of  the  slides  have  been pre-rendered already.  During the initial rendering phase this
       will slow down slide changes, as most CPU power is used for the rendering process  in  the
       background.   After  the  cache is fully primed, however, the changing of slides should be
       much faster, as with normal PDF viewers.

       To avoid excessive memory consumption, cached are only slides that took a significant time
       to  render; this threshold is configurable. In order to further reduce memory consumption,
       the pre-rendered and cached slides are selectively compressed in memory.  The  compression
       factor  is typically 10-30, however, it takes some CPU time to compress and uncompress, so
       there is a trade-off. Small images below a certain (configurable) threshold  will  not  be
       compressed.

       Please refer to the pdfpcrc(5) man page for options to fine tune the caching algorithm.

   Timer
       If  a  duration  is  given  (-d  option),  the  timer will show a countdown with the given
       parameters.  If no duration is specified (or if a value of 0 is given to the  -d  option),
       the  timer  will show how much time has been spent.  The duration is stored automatically,
       so you do not need to repeat it for every invocation.

       The timer is started if you are navigating away from the first page for  the  first  time.
       This  feature  is quite useful as you may want to show the title page of your presentation
       while people are still entering the room and the presentation has not  really  begun  yet.
       If  you  want  to  start over you can use the 'Ctrl + t' key which will make the presenter
       reset the timer.

       If a duration is given, the timer also  provides  hints  aiding  the  presenter  to  judge
       whether  the  talk would end on time.  There are two modes in which pdfpc can operate.  In
       the old (and the only one available up to, and including pdfpc-4.0.8) mode, at the  moment
       the  timer  reaches  the  defined last-minutes value it will change color to indicate your
       talk is nearing its end, thus mimicking a chairman frantically pantomiming in front of you
       with  five  (four, three, ...) fingers up.  A drawback of this approach is it is often too
       late at that moment to alter the presentation pace without ruining to some extent the rest
       of  the  talk.   On  the  other  hand,  the  warning  indication  provides  an unnecessary
       distraction if you have been perfectly conveying  the  talk  and  the  remaining  time  is
       adequate.

       Contrary  to  that,  in  the  new (default) mode, pdfpc tracks your progress continuously,
       calculating   the   expected   time   as   (talk_duration)*(current_user_slide_number    -
       0.5)/(total_number_of_user_slides)  and  comparing  it  to  the  actual  wall  time  since
       beginning of the talk.  If these two numbers differ by more than  60  seconds,  the  timer
       changes  its  color  to  either  orange (indicating you need to speed up) or a blueish one
       (need to slow down).  Once the optimal progress is  recovered,  the  timer  becomes  white
       again.   In  this mode, the last-minutes option (-l) has no effect.  The previous behavior
       can be restored by setting the 'timer-pace-color' option to 'false' in  the  configuration
       file, see pdfpcrc(5).

       In  any  case  as soon as the timer reaches the zero mark (00:00:00), it will turn red and
       count further down showing a negative time, to provide information on how many minutes you
       are overtime.

   Notes
       Textual  notes  can  be  displayed for each slide.  pdfpc understands the Markdown syntax,
       which allows for rendering anything from plain text to  a  very  rich  formatting,  if  so
       desired.  A few types of PDF annotations are understood by pdfpc and will be automatically
       imported and displayed. The PDF annotations can be made using many PDF  editors  and  even
       viewers;   when  using  LaTeX,  the pdfpc package (see below) provides a convenient macro.
       These "native" PDF notes cannot be edited in pdfpc.

       In addition, while in the presentation mode, pressing 'Ctrl + n' will allow you to take or
       edit  notes  for the current slide.  These notes are stored in the .pdfpc file. The native
       PDF annotations take precedence over these notes, i.e., if a note exists for a given slide
       in  the  .pdfpc  file,  any  PDF  annotation on that page will silently override it. While
       editing a note, the normal keybindings are disabled, e.g., you  are  not  able  to  change
       slides. To exit the note editing mode, press the Escape key.

       Although  mixing  the  two  types  of notes is possible, for a given presentation one will
       likely want to have either only the "native" notes (produced by  the  same  PDF  authoring
       software  used  for  making  the  slides), or only the "pdfpc" ones.  Note that if the PDF
       presentation changes, the notes stored in the respective .pdfpc file may get out of sync.

       pdfpc also supports old-style beamer notes (see the -n option), which  are  typeset  on  a
       half  of  the  "virtual"  slide  twice as large as the real one. Note that due to a bug in
       beamer, the auto-grouping feature does not work with such presentations.

   Overview mode
       Pressing the Tab key enters the overview mode, where thumbnails of the slides are shown in
       a grid.  You can select a slide to jump to with the mouse or with the arrow keys.  You can
       also define overlays and the end slide (see next sections) in this mode.  Press Escape  to
       exit the mode without making an change.

   Overlays
       Many slide preparation systems allow for overlays, i.e.  sets of slides that are logically
       grouped together as a single, changing slide.  Examples include enumerations where  bullet
       items  are  displayed  one  after another, or rough "animations", where parts of a picture
       change from slide to slide. Pdfpc includes facilities for dealing with such overlays.

       In this description, we  will  differentiate  between  slides  (i.e.   pages  in  the  PDF
       document)  and  "user slides", that are the logical slides.  The standard forward movement
       command (page down, enter, etc.) moves through one slide at a  time,  as  expected.   This
       means  that  every  step in the overlay is traversed.  The backward movement command works
       differently depending on whether the current and previous slides are part of an overlay:

       • If the current slide is part of an overlay we just jump to  the  previous  slide.   That
         means  that we are in the middle of an overlay and can jump forward and backward through
         the single steps of it

       • If the current slide is not part of an overlay (or if it is  the  first  one),  but  the
         previous  slides  are,  we  jump to the previous user slide.  This means that when going
         back in the presentation you do not have to go through every step of the overlay,  pdfpc
         just  shows  the  first  slide  of  each  overlay.   As  one  typically  goes  back in a
         presentation only when looking for a concrete slide, this is more convenient.

       The Shift + Page up/down key combinations work on the "user slide"  basis.   You  can  use
       them  to  skip  the rest of an overlay or to jump to the previous user slide, ignoring the
       state of the current slide.

       When going through an overlay, two additional previews may be activated in  the  presenter
       view, just below the main view, showing the next and the previous slide in an overlay.

       Pdfpc  tries  to  find these overlays automatically by looking into the page labels in the
       PDF file.  For LaTeX this works  correctly  at  least  with  the  beamer  class  and  also
       modifying  the  page numbers manually (compiling with pdflatex).  If your preferred slide-
       producing method does not  work  correctly  with  this  detection,  you  can  supply  this
       information using the 'Ctrl + o' key for each slide that is part of an overlay (except the
       first one!).  The page numbering is  also  adapted.   This  information  is  automatically
       stored.

   Hidden slides
       When  preparing  presentation  from  an existing set of slides, it is sometimes helpful to
       mark certain slides to be skipped during the talk. The 'Ctrl + h' combination toggles  the
       "hidden"  attribute  of  the  current  slide, making it essentially invisible. It is still
       possible to navigate to a hidden slide either in the Overview mode, using the Goto  action
       ('g'),  or  by  hitting  'Shift  + n' or 'Shift + p' to switch to the next/previous slide,
       respectively, ignoring the "hidden" attribute.

   End slide
       Some people like to have some additional, backup slides after the last slide in the actual
       presentation.   Things  like  bibliographic  references or slides referring to specialized
       questions are typical examples.  Pdfpc lets you define which is  the  last  slide  in  the
       actual presentation via the 'Ctrl + e' key.  This just changes the progress display in the
       presenter screen, as to have a better overview of how many slides are left.

   Page transitions
       Pdfpc supports almost all standard animated PDF  page  transitions:  blinds,  box,  cover,
       dissolve,  fade,  glitter  (except  the  diagonal  one),  push,  split, uncover, and wipe,
       including various alignments, angles, and directions (where applicable).  The  transitions
       are  enabled only for sequential (either forward or backward) movement; in the later case,
       the transition is "inverted".

       Advancing slides automatically is also supported.

   Movies
       Pdfpc can play back movies included in the PDF file.  Movies may be started and stopped by
       clicking  within  their area.  For the presenter, a progress bar is drawn along the bottom
       of the movie.  This expands when the mouse  hovers  over  it,  allowing  one  to  seek  by
       clicking  or  dragging  within  the  progress  bar.   Switching slides automatically stops
       playback, and movies will be reset after leaving and returning to a slide.

       Movies may be included in PDF files as "screen annotations". In LaTeX, such movies may  be
       added  to  a  presentation with the "multimedia" package. Note that the autoplay option is
       not yet supported.

       pdfpc will also play back movies linked from a hyperlink of type "launch".

       See  our  website  ⟨http://pdfpc.github.io/demo/pdfpc-video-example.zip⟩  for  a  detailed
       explanation with examples.

   Pointer mode
       If  needed,  it is possible to turn on a pointer which draws a red (by default) dot in the
       place pointed by mouse cursor on both presenter  and  presentation  screens.  It  is  also
       possible  to  increase  and  decrease the pointer size.  Additionally, when the pointer is
       enabled, it is possible to highlight some area of the current slide using the  drag  mouse
       motion.  The area outside the selected region will be dimmed. You can zoom in the selected
       area by pressing 'z'; press 'Escape' to exit the zoom  mode.  You  can  highlight  another
       region  while  zoomed  in, but there will be no further action on pressing 'z'. Drawing is
       also disabled in this mode.

   Spotlight mode
       Spotlight mode is similar to the pointer mode: a circular area that moves with  the  mouse
       and can be adjusted in size, but instead of highlighting the spot by a different color, it
       shades the background.

   Drawing mode
       It is possible to turn on a mode which allows drawing over slides with the mouse cursor or
       a  connected  tablet.  When drawing mode is enabled, drawings can be made on the presenter
       screen. A separate drawing will be kept in memory for each  slide  (based  on  user  slide
       numbers,  so  consolidating  overlay  slides).  Drawings  are  presently not saved between
       sessions.

       In the drawing mode, there are two drawing tools, a pen and an eraser. An indicator in the
       bottom-left  corner of the presenter screen will indicate which is active. When in the pen
       mode, the color and size of the pen will be indicated by the cursor. The pen size  can  be
       increased  or decreased using hot keys specified in the key bindings. When the eraser tool
       is active, the size of the cursor indicates the amount to erase.

       The color of the pen can be changed through key bindings or using the toolbox.

       If you are using a tablet, the pen or eraser tool will be selected based  on  whether  the
       tablet reports a pen or eraser input device is being used, overriding the normal selection
       of the drawing tool. Also for pressure-sensitive input devices, the pressure  will  affect
       the  line  width  and  the  eraser  size.   Both  these  features  can  be disabled in the
       configuration file, if desired.

   Monitor Plug and Play
       Pdfpc can handle monitor plug and play. E.g. if pdfpc was started before the  presentation
       screen  was  attached  to  the computer, pdfpc can create and show the presentation screen
       after the second screen was attached. This allows the user  to  rehearse  the  slides  and
       switch to a normal presentation without having the full setup at the computer in advance.

   pdfpc files
       Notes,  user-defined  overlays,  and some additional information are stored in a file with
       extension "pdfpc".  When pdfpc is invoked with a PDF file, it automatically checks for and
       loads  the associated .pdfpc file, if it exists.  This means that you normally do not have
       to deal with this kind of files explicitly.

       Beside internal configuration, the following command-line options are saved in  the  pdfpc
       file for later usage:

       • duration

       • end_time

       • last_minutes

       • notes (position)

       • page_transition

       • start_time

   Appearance
       With  GTK3 it is possible to modify the appearance of pdfpc. There are two locations where
       pdfpc is looking for files. The default location is /usr/share/pixmaps/pdfpc/pdfpc.css. It
       can be copied to $XDG_CONFIG_HOME/pdfpc/pdfpc.css and modified to the user's liking.

       The  geometry of various views (the current/next etc slide) in the presenter window can be
       adjusted at run time in the "Customization" mode, which is activated by pressing  Shift+c.
       In this mode, mouse-draggable handles will appear. Exit the customization with Escape.

   Desktop integration
       Pdfpc  provides a DBus interface that appears on the session bus as io.github.pdfpc. Other
       applications can, in particular, execute any action listed by --list-actions. It  is  also
       possible  to control pdfpc from the command line (and write shell scripts) using the dbus-
       send(1) utility. For example, to advance to the next slide, run

       dbus-send --type=method_call --session --dest=io.github.pdfpc
        /io/github/pdfpc io.github.pdfpc.TriggerAction string:next

       For actions that require an argument, use TriggerActionArg, e.g.,

       dbus-send --type=method_call --session --dest=io.github.pdfpc
        /io/github/pdfpc io.github.pdfpc.TriggerActionArg string:switchMode
        string:pointer

       In addition to TriggerAction*, the pdfpc DBus interface exposes the GetNotes method, three
       properties  (NumberOfOverlays,  NumberOfSlides,  Url)  and  two signals (OverlayChange and
       SlideChange).

   Remote control
       Pdfpc has a built-in REST server. When enabled (off by default), it allows for controlling
       presentations  over  network,  e.g.,  using  a  mobile device as a smart controller. (This
       section  will  be  extended  with  more  details  when  the  REST  interface  sufficiently
       stabilizes.)

   LaTeX package
       A  tiny  LaTeX  package  is  available  for pdfpc at CTAN. It provides a convenient way to
       specify notes and to define certain meta properties  of  the  presentation.   For  a  full
       documentation, please consult the pdfpc package documentation. You can open it with:

              $ texdoc pdfpc

BUGS

       Bugs can be reported at our issue tracker ⟨https://github.com/pdfpc/pdfpc/issues⟩.

ACKNOWLEDGEMENTS

       pdfpc  was previously developed by David Vilar ⟨https://github.com/davvil/pdfpc⟩, which in
       turn was a fork of Jakob Westhoff's PDF Presenter Console ⟨https://github.com/
       jakobwesthoff/Pdf-Presenter-Console⟩.

SEE ALSO

       pdfpcrc(5)

       There are several other programs with similar functionality.

       impressive(1) has nice transition effects.

       hpdfp(1) is the Haskell PDF Presenter ⟨http://michaeldadams.org/projects/
       haskell-pdf-presenter/⟩ program, which packs an amazing level of  functionality  into  not
       many lines of Haskell.

       pympress(1) is a little PDF reader written in Python ⟨https://github.com/Cimbali/pympress⟩
       which handles dual screens and beamer notes.

       dspdfviewer(1) is a specialized Dual-Screen PDF Viewer for latex-beamer ⟨https://
       github.com/dannyedel/dspdfviewer⟩ for beamer-produced wide PDF with notes on the right.

       Many  PDF viewers have full-screen presentation modes, but without dual-monitor preview or
       notes or a timer. These include zathura(1), evince(1), and okular(1).

                                                                                         PDFPC(1)