Provided by: perl-doc_5.36.0-9ubuntu1.1_all bug

NAME

       perlfaq5 - Files and Formats

VERSION

       version 5.20210520

DESCRIPTION

       This section deals with I/O and the "f" issues: filehandles, flushing, formats, and
       footers.

   How do I flush/unbuffer an output filehandle? Why must I do this?
       (contributed by brian d foy)

       You might like to read Mark Jason Dominus's "Suffering From Buffering" at
       <http://perl.plover.com/FAQs/Buffering.html> .

       Perl normally buffers output so it doesn't make a system call for every bit of output. By
       saving up output, it makes fewer expensive system calls.  For instance, in this little bit
       of code, you want to print a dot to the screen for every line you process to watch the
       progress of your program.  Instead of seeing a dot for every line, Perl buffers the output
       and you have a long wait before you see a row of 50 dots all at once:

           # long wait, then row of dots all at once
           while( <> ) {
               print ".";
               print "\n" unless ++$count % 50;

               #... expensive line processing operations
           }

       To get around this, you have to unbuffer the output filehandle, in this case, "STDOUT".
       You can set the special variable $| to a true value (mnemonic: making your filehandles
       "piping hot"):

           $|++;

           # dot shown immediately
           while( <> ) {
               print ".";
               print "\n" unless ++$count % 50;

               #... expensive line processing operations
           }

       The $| is one of the per-filehandle special variables, so each filehandle has its own copy
       of its value. If you want to merge standard output and standard error for instance, you
       have to unbuffer each (although STDERR might be unbuffered by default):

           {
               my $previous_default = select(STDOUT);  # save previous default
               $|++;                                   # autoflush STDOUT
               select(STDERR);
               $|++;                                   # autoflush STDERR, to be sure
               select($previous_default);              # restore previous default
           }

           # now should alternate . and +
           while( 1 ) {
               sleep 1;
               print STDOUT ".";
               print STDERR "+";
               print STDOUT "\n" unless ++$count % 25;
           }

       Besides the $| special variable, you can use "binmode" to give your filehandle a ":unix"
       layer, which is unbuffered:

           binmode( STDOUT, ":unix" );

           while( 1 ) {
               sleep 1;
               print ".";
               print "\n" unless ++$count % 50;
           }

       For more information on output layers, see the entries for "binmode" and open in perlfunc,
       and the PerlIO module documentation.

       If you are using IO::Handle or one of its subclasses, you can call the "autoflush" method
       to change the settings of the filehandle:

           use IO::Handle;
           open my( $io_fh ), ">", "output.txt";
           $io_fh->autoflush(1);

       The IO::Handle objects also have a "flush" method. You can flush the buffer any time you
       want without auto-buffering

           $io_fh->flush;

   How do I change, delete, or insert a line in a file, or append to the beginning of a file?
       (contributed by brian d foy)

       The basic idea of inserting, changing, or deleting a line from a text file involves
       reading and printing the file to the point you want to make the change, making the change,
       then reading and printing the rest of the file. Perl doesn't provide random access to
       lines (especially since the record input separator, $/, is mutable), although modules such
       as Tie::File can fake it.

       A Perl program to do these tasks takes the basic form of opening a file, printing its
       lines, then closing the file:

           open my $in,  '<',  $file      or die "Can't read old file: $!";
           open my $out, '>', "$file.new" or die "Can't write new file: $!";

           while( <$in> ) {
                   print $out $_;
           }

           close $out;

       Within that basic form, add the parts that you need to insert, change, or delete lines.

       To prepend lines to the beginning, print those lines before you enter the loop that prints
       the existing lines.

           open my $in,  '<',  $file      or die "Can't read old file: $!";
           open my $out, '>', "$file.new" or die "Can't write new file: $!";

           print $out "# Add this line to the top\n"; # <--- HERE'S THE MAGIC

           while( <$in> ) {
                   print $out $_;
           }

           close $out;

       To change existing lines, insert the code to modify the lines inside the "while" loop. In
       this case, the code finds all lowercased versions of "perl" and uppercases them. The
       happens for every line, so be sure that you're supposed to do that on every line!

           open my $in,  '<',  $file      or die "Can't read old file: $!";
           open my $out, '>', "$file.new" or die "Can't write new file: $!";

           print $out "# Add this line to the top\n";

           while( <$in> ) {
               s/\b(perl)\b/Perl/g;
               print $out $_;
           }

           close $out;

       To change only a particular line, the input line number, $., is useful. First read and
       print the lines up to the one you  want to change. Next, read the single line you want to
       change, change it, and print it. After that, read the rest of the lines and print those:

           while( <$in> ) { # print the lines before the change
               print $out $_;
               last if $. == 4; # line number before change
           }

           my $line = <$in>;
           $line =~ s/\b(perl)\b/Perl/g;
           print $out $line;

           while( <$in> ) { # print the rest of the lines
               print $out $_;
           }

       To skip lines, use the looping controls. The "next" in this example skips comment lines,
       and the "last" stops all processing once it encounters either "__END__" or "__DATA__".

           while( <$in> ) {
               next if /^\s+#/;             # skip comment lines
               last if /^__(END|DATA)__$/;  # stop at end of code marker
               print $out $_;
           }

       Do the same sort of thing to delete a particular line by using "next" to skip the lines
       you don't want to show up in the output. This example skips every fifth line:

           while( <$in> ) {
               next unless $. % 5;
               print $out $_;
           }

       If, for some odd reason, you really want to see the whole file at once rather than
       processing line-by-line, you can slurp it in (as long as you can fit the whole thing in
       memory!):

           open my $in,  '<',  $file      or die "Can't read old file: $!"
           open my $out, '>', "$file.new" or die "Can't write new file: $!";

           my $content = do { local $/; <$in> }; # slurp!

               # do your magic here

           print $out $content;

       Modules such as Path::Tiny and Tie::File can help with that too. If you can, however,
       avoid reading the entire file at once. Perl won't give that memory back to the operating
       system until the process finishes.

       You can also use Perl one-liners to modify a file in-place. The following changes all
       'Fred' to 'Barney' in inFile.txt, overwriting the file with the new contents. With the
       "-p" switch, Perl wraps a "while" loop around the code you specify with "-e", and "-i"
       turns on in-place editing. The current line is in $_. With "-p", Perl automatically prints
       the value of $_ at the end of the loop. See perlrun for more details.

           perl -pi -e 's/Fred/Barney/' inFile.txt

       To make a backup of "inFile.txt", give "-i" a file extension to add:

           perl -pi.bak -e 's/Fred/Barney/' inFile.txt

       To change only the fifth line, you can add a test checking $., the input line number, then
       only perform the operation when the test passes:

           perl -pi -e 's/Fred/Barney/ if $. == 5' inFile.txt

       To add lines before a certain line, you can add a line (or lines!)  before Perl prints $_:

           perl -pi -e 'print "Put before third line\n" if $. == 3' inFile.txt

       You can even add a line to the beginning of a file, since the current line prints at the
       end of the loop:

           perl -pi -e 'print "Put before first line\n" if $. == 1' inFile.txt

       To insert a line after one already in the file, use the "-n" switch.  It's just like "-p"
       except that it doesn't print $_ at the end of the loop, so you have to do that yourself.
       In this case, print $_ first, then print the line that you want to add.

           perl -ni -e 'print; print "Put after fifth line\n" if $. == 5' inFile.txt

       To delete lines, only print the ones that you want.

           perl -ni -e 'print if /d/' inFile.txt

   How do I count the number of lines in a file?
       (contributed by brian d foy)

       Conceptually, the easiest way to count the lines in a file is to simply read them and
       count them:

           my $count = 0;
           while( <$fh> ) { $count++; }

       You don't really have to count them yourself, though, since Perl already does that with
       the $. variable, which is the current line number from the last filehandle read:

           1 while( <$fh> );
           my $count = $.;

       If you want to use $., you can reduce it to a simple one-liner, like one of these:

           % perl -lne '} print $.; {'    file

           % perl -lne 'END { print $. }' file

       Those can be rather inefficient though. If they aren't fast enough for you, you might just
       read chunks of data and count the number of newlines:

           my $lines = 0;
           open my($fh), '<:raw', $filename or die "Can't open $filename: $!";
           while( sysread $fh, $buffer, 4096 ) {
               $lines += ( $buffer =~ tr/\n// );
           }
           close $fh;

       However, that doesn't work if the line ending isn't a newline. You might change that
       "tr///" to a "s///" so you can count the number of times the input record separator, $/,
       shows up:

           my $lines = 0;
           open my($fh), '<:raw', $filename or die "Can't open $filename: $!";
           while( sysread $fh, $buffer, 4096 ) {
               $lines += ( $buffer =~ s|$/||g; );
           }
           close $fh;

       If you don't mind shelling out, the "wc" command is usually the fastest, even with the
       extra interprocess overhead. Ensure that you have an untainted filename though:

           #!perl -T

           $ENV{PATH} = undef;

           my $lines;
           if( $filename =~ /^([0-9a-z_.]+)\z/ ) {
               $lines = `/usr/bin/wc -l $1`
               chomp $lines;
           }

   How do I delete the last N lines from a file?
       (contributed by brian d foy)

       The easiest conceptual solution is to count the lines in the file then start at the
       beginning and print the number of lines (minus the last N) to a new file.

       Most often, the real question is how you can delete the last N lines without making more
       than one pass over the file, or how to do it without a lot of copying. The easy concept is
       the hard reality when you might have millions of lines in your file.

       One trick is to use File::ReadBackwards, which starts at the end of the file. That module
       provides an object that wraps the real filehandle to make it easy for you to move around
       the file. Once you get to the spot you need, you can get the actual filehandle and work
       with it as normal. In this case, you get the file position at the end of the last line you
       want to keep and truncate the file to that point:

           use File::ReadBackwards;

           my $filename = 'test.txt';
           my $Lines_to_truncate = 2;

           my $bw = File::ReadBackwards->new( $filename )
               or die "Could not read backwards in [$filename]: $!";

           my $lines_from_end = 0;
           until( $bw->eof or $lines_from_end == $Lines_to_truncate ) {
               print "Got: ", $bw->readline;
               $lines_from_end++;
           }

           truncate( $filename, $bw->tell );

       The File::ReadBackwards module also has the advantage of setting the input record
       separator to a regular expression.

       You can also use the Tie::File module which lets you access the lines through a tied
       array. You can use normal array operations to modify your file, including setting the last
       index and using "splice".

   How can I use Perl's "-i" option from within a program?
       "-i" sets the value of Perl's $^I variable, which in turn affects the behavior of "<>";
       see perlrun for more details. By modifying the appropriate variables directly, you can get
       the same behavior within a larger program. For example:

           # ...
           {
               local($^I, @ARGV) = ('.orig', glob("*.c"));
               while (<>) {
                   if ($. == 1) {
                       print "This line should appear at the top of each file\n";
                   }
                   s/\b(p)earl\b/${1}erl/i;        # Correct typos, preserving case
                   print;
                   close ARGV if eof;              # Reset $.
               }
           }
           # $^I and @ARGV return to their old values here

       This block modifies all the ".c" files in the current directory, leaving a backup of the
       original data from each file in a new ".c.orig" file.

   How can I copy a file?
       (contributed by brian d foy)

       Use the File::Copy module. It comes with Perl and can do a true copy across file systems,
       and it does its magic in a portable fashion.

           use File::Copy;

           copy( $original, $new_copy ) or die "Copy failed: $!";

       If you can't use File::Copy, you'll have to do the work yourself: open the original file,
       open the destination file, then print to the destination file as you read the original.
       You also have to remember to copy the permissions, owner, and group to the new file.

   How do I make a temporary file name?
       If you don't need to know the name of the file, you can use "open()" with "undef" in place
       of the file name. In Perl 5.8 or later, the "open()" function creates an anonymous
       temporary file:

           open my $tmp, '+>', undef or die $!;

       Otherwise, you can use the File::Temp module.

           use File::Temp qw/ tempfile tempdir /;

           my $dir = tempdir( CLEANUP => 1 );
           ($fh, $filename) = tempfile( DIR => $dir );

           # or if you don't need to know the filename

           my $fh = tempfile( DIR => $dir );

       The File::Temp has been a standard module since Perl 5.6.1. If you don't have a modern
       enough Perl installed, use the "new_tmpfile" class method from the IO::File module to get
       a filehandle opened for reading and writing. Use it if you don't need to know the file's
       name:

           use IO::File;
           my $fh = IO::File->new_tmpfile()
               or die "Unable to make new temporary file: $!";

       If you're committed to creating a temporary file by hand, use the process ID and/or the
       current time-value. If you need to have many temporary files in one process, use a
       counter:

           BEGIN {
               use Fcntl;
               use File::Spec;
               my $temp_dir  = File::Spec->tmpdir();
               my $file_base = sprintf "%d-%d-0000", $$, time;
               my $base_name = File::Spec->catfile($temp_dir, $file_base);

               sub temp_file {
                   my $fh;
                   my $count = 0;
                   until( defined(fileno($fh)) || $count++ > 100 ) {
                       $base_name =~ s/-(\d+)$/"-" . (1 + $1)/e;
                       # O_EXCL is required for security reasons.
                       sysopen $fh, $base_name, O_WRONLY|O_EXCL|O_CREAT;
                   }

                   if( defined fileno($fh) ) {
                       return ($fh, $base_name);
                   }
                   else {
                       return ();
                   }
               }
           }

   How can I manipulate fixed-record-length files?
       The most efficient way is using pack() and unpack(). This is faster than using substr()
       when taking many, many strings. It is slower for just a few.

       Here is a sample chunk of code to break up and put back together again some fixed-format
       input lines, in this case from the output of a normal, Berkeley-style ps:

           # sample input line:
           #   15158 p5  T      0:00 perl /home/tchrist/scripts/now-what
           my $PS_T = 'A6 A4 A7 A5 A*';
           open my $ps, '-|', 'ps';
           print scalar <$ps>;
           my @fields = qw( pid tt stat time command );
           while (<$ps>) {
               my %process;
               @process{@fields} = unpack($PS_T, $_);
               for my $field ( @fields ) {
                   print "$field: <$process{$field}>\n";
               }
               print 'line=', pack($PS_T, @process{@fields} ), "\n";
           }

       We've used a hash slice in order to easily handle the fields of each row.  Storing the
       keys in an array makes it easy to operate on them as a group or loop over them with "for".
       It also avoids polluting the program with global variables and using symbolic references.

   How can I make a filehandle local to a subroutine? How do I pass filehandles between
       subroutines? How do I make an array of filehandles?
       As of perl5.6, open() autovivifies file and directory handles as references if you pass it
       an uninitialized scalar variable.  You can then pass these references just like any other
       scalar, and use them in the place of named handles.

           open my    $fh, $file_name;

           open local $fh, $file_name;

           print $fh "Hello World!\n";

           process_file( $fh );

       If you like, you can store these filehandles in an array or a hash.  If you access them
       directly, they aren't simple scalars and you need to give "print" a little help by placing
       the filehandle reference in braces. Perl can only figure it out on its own when the
       filehandle reference is a simple scalar.

           my @fhs = ( $fh1, $fh2, $fh3 );

           for( $i = 0; $i <= $#fhs; $i++ ) {
               print {$fhs[$i]} "just another Perl answer, \n";
           }

       Before perl5.6, you had to deal with various typeglob idioms which you may see in older
       code.

           open FILE, "> $filename";
           process_typeglob(   *FILE );
           process_reference( \*FILE );

           sub process_typeglob  { local *FH = shift; print FH  "Typeglob!" }
           sub process_reference { local $fh = shift; print $fh "Reference!" }

       If you want to create many anonymous handles, you should check out the Symbol or
       IO::Handle modules.

   How can I use a filehandle indirectly?
       An indirect filehandle is the use of something other than a symbol in a place that a
       filehandle is expected. Here are ways to get indirect filehandles:

           $fh =   SOME_FH;       # bareword is strict-subs hostile
           $fh =  "SOME_FH";      # strict-refs hostile; same package only
           $fh =  *SOME_FH;       # typeglob
           $fh = \*SOME_FH;       # ref to typeglob (bless-able)
           $fh =  *SOME_FH{IO};   # blessed IO::Handle from *SOME_FH typeglob

       Or, you can use the "new" method from one of the IO::* modules to create an anonymous
       filehandle and store that in a scalar variable.

           use IO::Handle;                     # 5.004 or higher
           my $fh = IO::Handle->new();

       Then use any of those as you would a normal filehandle. Anywhere that Perl is expecting a
       filehandle, an indirect filehandle may be used instead. An indirect filehandle is just a
       scalar variable that contains a filehandle. Functions like "print", "open", "seek", or the
       "<FH>" diamond operator will accept either a named filehandle or a scalar variable
       containing one:

           ($ifh, $ofh, $efh) = (*STDIN, *STDOUT, *STDERR);
           print $ofh "Type it: ";
           my $got = <$ifh>
           print $efh "What was that: $got";

       If you're passing a filehandle to a function, you can write the function in two ways:

           sub accept_fh {
               my $fh = shift;
               print $fh "Sending to indirect filehandle\n";
           }

       Or it can localize a typeglob and use the filehandle directly:

           sub accept_fh {
               local *FH = shift;
               print  FH "Sending to localized filehandle\n";
           }

       Both styles work with either objects or typeglobs of real filehandles.  (They might also
       work with strings under some circumstances, but this is risky.)

           accept_fh(*STDOUT);
           accept_fh($handle);

       In the examples above, we assigned the filehandle to a scalar variable before using it.
       That is because only simple scalar variables, not expressions or subscripts of hashes or
       arrays, can be used with built-ins like "print", "printf", or the diamond operator. Using
       something other than a simple scalar variable as a filehandle is illegal and won't even
       compile:

           my @fd = (*STDIN, *STDOUT, *STDERR);
           print $fd[1] "Type it: ";                           # WRONG
           my $got = <$fd[0]>                                  # WRONG
           print $fd[2] "What was that: $got";                 # WRONG

       With "print" and "printf", you get around this by using a block and an expression where
       you would place the filehandle:

           print  { $fd[1] } "funny stuff\n";
           printf { $fd[1] } "Pity the poor %x.\n", 3_735_928_559;
           # Pity the poor deadbeef.

       That block is a proper block like any other, so you can put more complicated code there.
       This sends the message out to one of two places:

           my $ok = -x "/bin/cat";
           print { $ok ? $fd[1] : $fd[2] } "cat stat $ok\n";
           print { $fd[ 1+ ($ok || 0) ]  } "cat stat $ok\n";

       This approach of treating "print" and "printf" like object methods calls doesn't work for
       the diamond operator. That's because it's a real operator, not just a function with a
       comma-less argument. Assuming you've been storing typeglobs in your structure as we did
       above, you can use the built-in function named "readline" to read a record just as "<>"
       does. Given the initialization shown above for @fd, this would work, but only because
       readline() requires a typeglob. It doesn't work with objects or strings, which might be a
       bug we haven't fixed yet.

           $got = readline($fd[0]);

       Let it be noted that the flakiness of indirect filehandles is not related to whether
       they're strings, typeglobs, objects, or anything else.  It's the syntax of the fundamental
       operators. Playing the object game doesn't help you at all here.

   How can I open a filehandle to a string?
       (contributed by Peter J. Holzer, hjp-usenet2@hjp.at)

       Since Perl 5.8.0 a file handle referring to a string can be created by calling open with a
       reference to that string instead of the filename.  This file handle can then be used to
       read from or write to the string:

           open(my $fh, '>', \$string) or die "Could not open string for writing";
           print $fh "foo\n";
           print $fh "bar\n";    # $string now contains "foo\nbar\n"

           open(my $fh, '<', \$string) or die "Could not open string for reading";
           my $x = <$fh>;    # $x now contains "foo\n"

       With older versions of Perl, the IO::String module provides similar functionality.

   How can I set up a footer format to be used with write()?
       There's no builtin way to do this, but perlform has a couple of techniques to make it
       possible for the intrepid hacker.

   How can I write() into a string?
       (contributed by brian d foy)

       If you want to "write" into a string, you just have to <open> a filehandle to a string,
       which Perl has been able to do since Perl 5.6:

           open FH, '>', \my $string;
           write( FH );

       Since you want to be a good programmer, you probably want to use a lexical filehandle,
       even though formats are designed to work with bareword filehandles since the default
       format names take the filehandle name. However, you can control this with some Perl
       special per-filehandle variables: $^, which names the top-of-page format, and $~ which
       shows the line format. You have to change the default filehandle to set these variables:

           open my($fh), '>', \my $string;

           { # set per-filehandle variables
               my $old_fh = select( $fh );
               $~ = 'ANIMAL';
               $^ = 'ANIMAL_TOP';
               select( $old_fh );
           }

           format ANIMAL_TOP =
            ID  Type    Name
           .

           format ANIMAL =
           @##   @<<<    @<<<<<<<<<<<<<<
           $id,  $type,  $name
           .

       Although write can work with lexical or package variables, whatever variables you use have
       to scope in the format. That most likely means you'll want to localize some package
       variables:

           {
               local( $id, $type, $name ) = qw( 12 cat Buster );
               write( $fh );
           }

           print $string;

       There are also some tricks that you can play with "formline" and the accumulator variable
       $^A, but you lose a lot of the value of formats since "formline" won't handle paging and
       so on. You end up reimplementing formats when you use them.

   How can I output my numbers with commas added?
       (contributed by brian d foy and Benjamin Goldberg)

       You can use Number::Format to separate places in a number.  It handles locale information
       for those of you who want to insert full stops instead (or anything else that they want to
       use, really).

       This subroutine will add commas to your number:

           sub commify {
               local $_  = shift;
               1 while s/^([-+]?\d+)(\d{3})/$1,$2/;
               return $_;
           }

       This regex from Benjamin Goldberg will add commas to numbers:

           s/(^[-+]?\d+?(?=(?>(?:\d{3})+)(?!\d))|\G\d{3}(?=\d))/$1,/g;

       It is easier to see with comments:

           s/(
               ^[-+]?             # beginning of number.
               \d+?               # first digits before first comma
               (?=                # followed by, (but not included in the match) :
                   (?>(?:\d{3})+) # some positive multiple of three digits.
                   (?!\d)         # an *exact* multiple, not x * 3 + 1 or whatever.
               )
               |                  # or:
               \G\d{3}            # after the last group, get three digits
               (?=\d)             # but they have to have more digits after them.
           )/$1,/xg;

   How can I translate tildes (~) in a filename?
       Use the <> ("glob()") operator, documented in perlfunc.  Versions of Perl older than 5.6
       require that you have a shell installed that groks tildes. Later versions of Perl have
       this feature built in. The File::KGlob module (available from CPAN) gives more portable
       glob functionality.

       Within Perl, you may use this directly:

           $filename =~ s{
             ^ ~             # find a leading tilde
             (               # save this in $1
                 [^/]        # a non-slash character
                       *     # repeated 0 or more times (0 means me)
             )
           }{
             $1
                 ? (getpwnam($1))[7]
                 : ( $ENV{HOME} || $ENV{LOGDIR} )
           }ex;

   How come when I open a file read-write it wipes it out?
       Because you're using something like this, which truncates the file then gives you read-
       write access:

           open my $fh, '+>', '/path/name'; # WRONG (almost always)

       Whoops. You should instead use this, which will fail if the file doesn't exist:

           open my $fh, '+<', '/path/name'; # open for update

       Using ">" always clobbers or creates. Using "<" never does either. The "+" doesn't change
       this.

       Here are examples of many kinds of file opens. Those using "sysopen" all assume that
       you've pulled in the constants from Fcntl:

           use Fcntl;

       To open file for reading:

           open my $fh, '<', $path                               or die $!;
           sysopen my $fh, $path, O_RDONLY                       or die $!;

       To open file for writing, create new file if needed or else truncate old file:

           open my $fh, '>', $path                               or die $!;
           sysopen my $fh, $path, O_WRONLY|O_TRUNC|O_CREAT       or die $!;
           sysopen my $fh, $path, O_WRONLY|O_TRUNC|O_CREAT, 0666 or die $!;

       To open file for writing, create new file, file must not exist:

           sysopen my $fh, $path, O_WRONLY|O_EXCL|O_CREAT        or die $!;
           sysopen my $fh, $path, O_WRONLY|O_EXCL|O_CREAT, 0666  or die $!;

       To open file for appending, create if necessary:

           open my $fh, '>>', $path                              or die $!;
           sysopen my $fh, $path, O_WRONLY|O_APPEND|O_CREAT      or die $!;
           sysopen my $fh, $path, O_WRONLY|O_APPEND|O_CREAT, 0666 or die $!;

       To open file for appending, file must exist:

           sysopen my $fh, $path, O_WRONLY|O_APPEND              or die $!;

       To open file for update, file must exist:

           open my $fh, '+<', $path                              or die $!;
           sysopen my $fh, $path, O_RDWR                         or die $!;

       To open file for update, create file if necessary:

           sysopen my $fh, $path, O_RDWR|O_CREAT                 or die $!;
           sysopen my $fh, $path, O_RDWR|O_CREAT, 0666           or die $!;

       To open file for update, file must not exist:

           sysopen my $fh, $path, O_RDWR|O_EXCL|O_CREAT          or die $!;
           sysopen my $fh, $path, O_RDWR|O_EXCL|O_CREAT, 0666    or die $!;

       To open a file without blocking, creating if necessary:

           sysopen my $fh, '/foo/somefile', O_WRONLY|O_NDELAY|O_CREAT
               or die "can't open /foo/somefile: $!":

       Be warned that neither creation nor deletion of files is guaranteed to be an atomic
       operation over NFS. That is, two processes might both successfully create or unlink the
       same file! Therefore O_EXCL isn't as exclusive as you might wish.

       See also perlopentut.

   Why do I sometimes get an "Argument list too long" when I use <*>?
       The "<>" operator performs a globbing operation (see above).  In Perl versions earlier
       than v5.6.0, the internal glob() operator forks csh(1) to do the actual glob expansion,
       but csh can't handle more than 127 items and so gives the error message "Argument list too
       long". People who installed tcsh as csh won't have this problem, but their users may be
       surprised by it.

       To get around this, either upgrade to Perl v5.6.0 or later, do the glob yourself with
       readdir() and patterns, or use a module like File::Glob, one that doesn't use the shell to
       do globbing.

   How can I open a file named with a leading ">" or trailing blanks?
       (contributed by Brian McCauley)

       The special two-argument form of Perl's open() function ignores trailing blanks in
       filenames and infers the mode from certain leading characters (or a trailing "|"). In
       older versions of Perl this was the only version of open() and so it is prevalent in old
       code and books.

       Unless you have a particular reason to use the two-argument form you should use the three-
       argument form of open() which does not treat any characters in the filename as special.

           open my $fh, "<", "  file  ";  # filename is "   file   "
           open my $fh, ">", ">file";     # filename is ">file"

   How can I reliably rename a file?
       If your operating system supports a proper mv(1) utility or its functional equivalent,
       this works:

           rename($old, $new) or system("mv", $old, $new);

       It may be more portable to use the File::Copy module instead.  You just copy to the new
       file to the new name (checking return values), then delete the old one. This isn't really
       the same semantically as a "rename()", which preserves meta-information like permissions,
       timestamps, inode info, etc.

   How can I lock a file?
       Perl's builtin flock() function (see perlfunc for details) will call flock(2) if that
       exists, fcntl(2) if it doesn't (on perl version 5.004 and later), and lockf(3) if neither
       of the two previous system calls exists.  On some systems, it may even use a different
       form of native locking.  Here are some gotchas with Perl's flock():

       1.  Produces a fatal error if none of the three system calls (or their close equivalent)
           exists.

       2.  lockf(3) does not provide shared locking, and requires that the filehandle be open for
           writing (or appending, or read/writing).

       3.  Some versions of flock() can't lock files over a network (e.g. on NFS file systems),
           so you'd need to force the use of fcntl(2) when you build Perl.  But even this is
           dubious at best. See the flock entry of perlfunc and the INSTALL file in the source
           distribution for information on building Perl to do this.

           Two potentially non-obvious but traditional flock semantics are that it waits
           indefinitely until the lock is granted, and that its locks are merely advisory. Such
           discretionary locks are more flexible, but offer fewer guarantees. This means that
           files locked with flock() may be modified by programs that do not also use flock().
           Cars that stop for red lights get on well with each other, but not with cars that
           don't stop for red lights. See the perlport manpage, your port's specific
           documentation, or your system-specific local manpages for details. It's best to assume
           traditional behavior if you're writing portable programs.  (If you're not, you should
           as always feel perfectly free to write for your own system's idiosyncrasies (sometimes
           called "features").  Slavish adherence to portability concerns shouldn't get in the
           way of your getting your job done.)

           For more information on file locking, see also "File Locking" in perlopentut if you
           have it (new for 5.6).

   Why can't I just open(FH, ">file.lock")?
       A common bit of code NOT TO USE is this:

           sleep(3) while -e 'file.lock';    # PLEASE DO NOT USE
           open my $lock, '>', 'file.lock'; # THIS BROKEN CODE

       This is a classic race condition: you take two steps to do something which must be done in
       one. That's why computer hardware provides an atomic test-and-set instruction. In theory,
       this "ought" to work:

           sysopen my $fh, "file.lock", O_WRONLY|O_EXCL|O_CREAT
               or die "can't open  file.lock: $!";

       except that lamentably, file creation (and deletion) is not atomic over NFS, so this won't
       work (at least, not every time) over the net.  Various schemes involving link() have been
       suggested, but these tend to involve busy-wait, which is also less than desirable.

   I still don't get locking. I just want to increment the number in the file. How can I do this?
       Didn't anyone ever tell you web-page hit counters were useless?  They don't count number
       of hits, they're a waste of time, and they serve only to stroke the writer's vanity. It's
       better to pick a random number; they're more realistic.

       Anyway, this is what you can do if you can't help yourself.

           use Fcntl qw(:DEFAULT :flock);
           sysopen my $fh, "numfile", O_RDWR|O_CREAT or die "can't open numfile: $!";
           flock $fh, LOCK_EX                        or die "can't flock numfile: $!";
           my $num = <$fh> || 0;
           seek $fh, 0, 0                            or die "can't rewind numfile: $!";
           truncate $fh, 0                           or die "can't truncate numfile: $!";
           (print $fh $num+1, "\n")                  or die "can't write numfile: $!";
           close $fh                                 or die "can't close numfile: $!";

       Here's a much better web-page hit counter:

           $hits = int( (time() - 850_000_000) / rand(1_000) );

       If the count doesn't impress your friends, then the code might. :-)

   All I want to do is append a small amount of text to the end of a file. Do I still have to use
       locking?
       If you are on a system that correctly implements "flock" and you use the example appending
       code from "perldoc -f flock" everything will be OK even if the OS you are on doesn't
       implement append mode correctly (if such a system exists). So if you are happy to restrict
       yourself to OSs that implement "flock" (and that's not really much of a restriction) then
       that is what you should do.

       If you know you are only going to use a system that does correctly implement appending
       (i.e. not Win32) then you can omit the "seek" from the code in the previous answer.

       If you know you are only writing code to run on an OS and filesystem that does implement
       append mode correctly (a local filesystem on a modern Unix for example), and you keep the
       file in block-buffered mode and you write less than one buffer-full of output between each
       manual flushing of the buffer then each bufferload is almost guaranteed to be written to
       the end of the file in one chunk without getting intermingled with anyone else's output.
       You can also use the "syswrite" function which is simply a wrapper around your system's
       write(2) system call.

       There is still a small theoretical chance that a signal will interrupt the system-level
       "write()" operation before completion. There is also a possibility that some STDIO
       implementations may call multiple system level "write()"s even if the buffer was empty to
       start. There may be some systems where this probability is reduced to zero, and this is
       not a concern when using ":perlio" instead of your system's STDIO.

   How do I randomly update a binary file?
       If you're just trying to patch a binary, in many cases something as simple as this works:

           perl -i -pe 's{window manager}{window mangler}g' /usr/bin/emacs

       However, if you have fixed sized records, then you might do something more like this:

           my $RECSIZE = 220; # size of record, in bytes
           my $recno   = 37;  # which record to update
           open my $fh, '+<', 'somewhere' or die "can't update somewhere: $!";
           seek $fh, $recno * $RECSIZE, 0;
           read $fh, $record, $RECSIZE == $RECSIZE or die "can't read record $recno: $!";
           # munge the record
           seek $fh, -$RECSIZE, 1;
           print $fh $record;
           close $fh;

       Locking and error checking are left as an exercise for the reader.  Don't forget them or
       you'll be quite sorry.

   How do I get a file's timestamp in perl?
       If you want to retrieve the time at which the file was last read, written, or had its
       meta-data (owner, etc) changed, you use the -A, -M, or -C file test operations as
       documented in perlfunc.  These retrieve the age of the file (measured against the start-
       time of your program) in days as a floating point number. Some platforms may not have all
       of these times. See perlport for details. To retrieve the "raw" time in seconds since the
       epoch, you would call the stat function, then use "localtime()", "gmtime()", or
       "POSIX::strftime()" to convert this into human-readable form.

       Here's an example:

           my $write_secs = (stat($file))[9];
           printf "file %s updated at %s\n", $file,
               scalar localtime($write_secs);

       If you prefer something more legible, use the File::stat module (part of the standard
       distribution in version 5.004 and later):

           # error checking left as an exercise for reader.
           use File::stat;
           use Time::localtime;
           my $date_string = ctime(stat($file)->mtime);
           print "file $file updated at $date_string\n";

       The POSIX::strftime() approach has the benefit of being, in theory, independent of the
       current locale. See perllocale for details.

   How do I set a file's timestamp in perl?
       You use the utime() function documented in "utime" in perlfunc.  By way of example, here's
       a little program that copies the read and write times from its first argument to all the
       rest of them.

           if (@ARGV < 2) {
               die "usage: cptimes timestamp_file other_files ...\n";
           }
           my $timestamp = shift;
           my($atime, $mtime) = (stat($timestamp))[8,9];
           utime $atime, $mtime, @ARGV;

       Error checking is, as usual, left as an exercise for the reader.

       The perldoc for utime also has an example that has the same effect as touch(1) on files
       that already exist.

       Certain file systems have a limited ability to store the times on a file at the expected
       level of precision. For example, the FAT and HPFS filesystem are unable to create dates on
       files with a finer granularity than two seconds. This is a limitation of the filesystems,
       not of utime().

   How do I print to more than one file at once?
       To connect one filehandle to several output filehandles, you can use the IO::Tee or
       Tie::FileHandle::Multiplex modules.

       If you only have to do this once, you can print individually to each filehandle.

           for my $fh ($fh1, $fh2, $fh3) { print $fh "whatever\n" }

   How can I read in an entire file all at once?
       The customary Perl approach for processing all the lines in a file is to do so one line at
       a time:

           open my $input, '<', $file or die "can't open $file: $!";
           while (<$input>) {
               chomp;
               # do something with $_
           }
           close $input or die "can't close $file: $!";

       This is tremendously more efficient than reading the entire file into memory as an array
       of lines and then processing it one element at a time, which is often--if not almost
       always--the wrong approach. Whenever you see someone do this:

           my @lines = <INPUT>;

       You should think long and hard about why you need everything loaded at once. It's just not
       a scalable solution.

       If you "mmap" the file with the File::Map module from CPAN, you can virtually load the
       entire file into a string without actually storing it in memory:

           use File::Map qw(map_file);

           map_file my $string, $filename;

       Once mapped, you can treat $string as you would any other string.  Since you don't
       necessarily have to load the data, mmap-ing can be very fast and may not increase your
       memory footprint.

       You might also find it more fun to use the standard Tie::File module, or the DB_File
       module's $DB_RECNO bindings, which allow you to tie an array to a file so that accessing
       an element of the array actually accesses the corresponding line in the file.

       If you want to load the entire file, you can use the Path::Tiny module to do it in one
       simple and efficient step:

           use Path::Tiny;

           my $all_of_it = path($filename)->slurp; # entire file in scalar
           my @all_lines = path($filename)->lines; # one line per element

       Or you can read the entire file contents into a scalar like this:

           my $var;
           {
               local $/;
               open my $fh, '<', $file or die "can't open $file: $!";
               $var = <$fh>;
           }

       That temporarily undefs your record separator, and will automatically close the file at
       block exit. If the file is already open, just use this:

           my $var = do { local $/; <$fh> };

       You can also use a localized @ARGV to eliminate the "open":

           my $var = do { local( @ARGV, $/ ) = $file; <> };

   How can I read in a file by paragraphs?
       Use the $/ variable (see perlvar for details). You can either set it to "" to eliminate
       empty paragraphs ("abc\n\n\n\ndef", for instance, gets treated as two paragraphs and not
       three), or "\n\n" to accept empty paragraphs.

       Note that a blank line must have no blanks in it. Thus "fred\n \nstuff\n\n" is one
       paragraph, but "fred\n\nstuff\n\n" is two.

   How can I read a single character from a file? From the keyboard?
       You can use the builtin "getc()" function for most filehandles, but it won't (easily) work
       on a terminal device. For STDIN, either use the Term::ReadKey module from CPAN or use the
       sample code in "getc" in perlfunc.

       If your system supports the portable operating system programming interface (POSIX), you
       can use the following code, which you'll note turns off echo processing as well.

           #!/usr/bin/perl -w
           use strict;
           $| = 1;
           for (1..4) {
               print "gimme: ";
               my $got = getone();
               print "--> $got\n";
           }
           exit;

           BEGIN {
               use POSIX qw(:termios_h);

               my ($term, $oterm, $echo, $noecho, $fd_stdin);

               my $fd_stdin = fileno(STDIN);

               $term     = POSIX::Termios->new();
               $term->getattr($fd_stdin);
               $oterm     = $term->getlflag();

               $echo     = ECHO | ECHOK | ICANON;
               $noecho   = $oterm & ~$echo;

               sub cbreak {
                   $term->setlflag($noecho);
                   $term->setcc(VTIME, 1);
                   $term->setattr($fd_stdin, TCSANOW);
               }

               sub cooked {
                   $term->setlflag($oterm);
                   $term->setcc(VTIME, 0);
                   $term->setattr($fd_stdin, TCSANOW);
               }

               sub getone {
                   my $key = '';
                   cbreak();
                   sysread(STDIN, $key, 1);
                   cooked();
                   return $key;
               }
           }

           END { cooked() }

       The Term::ReadKey module from CPAN may be easier to use. Recent versions include also
       support for non-portable systems as well.

           use Term::ReadKey;
           open my $tty, '<', '/dev/tty';
           print "Gimme a char: ";
           ReadMode "raw";
           my $key = ReadKey 0, $tty;
           ReadMode "normal";
           printf "\nYou said %s, char number %03d\n",
               $key, ord $key;

   How can I tell whether there's a character waiting on a filehandle?
       The very first thing you should do is look into getting the Term::ReadKey extension from
       CPAN. As we mentioned earlier, it now even has limited support for non-portable (read: not
       open systems, closed, proprietary, not POSIX, not Unix, etc.) systems.

       You should also check out the Frequently Asked Questions list in comp.unix.* for things
       like this: the answer is essentially the same.  It's very system-dependent. Here's one
       solution that works on BSD systems:

           sub key_ready {
               my($rin, $nfd);
               vec($rin, fileno(STDIN), 1) = 1;
               return $nfd = select($rin,undef,undef,0);
           }

       If you want to find out how many characters are waiting, there's also the FIONREAD ioctl
       call to be looked at. The h2ph tool that comes with Perl tries to convert C include files
       to Perl code, which can be "require"d. FIONREAD ends up defined as a function in the
       sys/ioctl.ph file:

           require './sys/ioctl.ph';

           $size = pack("L", 0);
           ioctl(FH, FIONREAD(), $size)    or die "Couldn't call ioctl: $!\n";
           $size = unpack("L", $size);

       If h2ph wasn't installed or doesn't work for you, you can grep the include files by hand:

           % grep FIONREAD /usr/include/*/*
           /usr/include/asm/ioctls.h:#define FIONREAD      0x541B

       Or write a small C program using the editor of champions:

           % cat > fionread.c
           #include <sys/ioctl.h>
           main() {
               printf("%#08x\n", FIONREAD);
           }
           ^D
           % cc -o fionread fionread.c
           % ./fionread
           0x4004667f

       And then hard-code it, leaving porting as an exercise to your successor.

           $FIONREAD = 0x4004667f;         # XXX: opsys dependent

           $size = pack("L", 0);
           ioctl(FH, $FIONREAD, $size)     or die "Couldn't call ioctl: $!\n";
           $size = unpack("L", $size);

       FIONREAD requires a filehandle connected to a stream, meaning that sockets, pipes, and tty
       devices work, but not files.

   How do I do a "tail -f" in perl?
       First try

           seek($gw_fh, 0, 1);

       The statement "seek($gw_fh, 0, 1)" doesn't change the current position, but it does clear
       the end-of-file condition on the handle, so that the next "<$gw_fh>" makes Perl try again
       to read something.

       If that doesn't work (it relies on features of your stdio implementation), then you need
       something more like this:

           for (;;) {
             for ($curpos = tell($gw_fh); <$gw_fh>; $curpos =tell($gw_fh)) {
               # search for some stuff and put it into files
             }
             # sleep for a while
             seek($gw_fh, $curpos, 0);  # seek to where we had been
           }

       If this still doesn't work, look into the "clearerr" method from IO::Handle, which resets
       the error and end-of-file states on the handle.

       There's also a File::Tail module from CPAN.

   How do I dup() a filehandle in Perl?
       If you check "open" in perlfunc, you'll see that several of the ways to call open() should
       do the trick. For example:

           open my $log, '>>', '/foo/logfile';
           open STDERR, '>&', $log;

       Or even with a literal numeric descriptor:

           my $fd = $ENV{MHCONTEXTFD};
           open $mhcontext, "<&=$fd";  # like fdopen(3S)

       Note that "<&STDIN" makes a copy, but "<&=STDIN" makes an alias. That means if you close
       an aliased handle, all aliases become inaccessible. This is not true with a copied one.

       Error checking, as always, has been left as an exercise for the reader.

   How do I close a file descriptor by number?
       If, for some reason, you have a file descriptor instead of a filehandle (perhaps you used
       "POSIX::open"), you can use the "close()" function from the POSIX module:

           use POSIX ();

           POSIX::close( $fd );

       This should rarely be necessary, as the Perl "close()" function is to be used for things
       that Perl opened itself, even if it was a dup of a numeric descriptor as with "MHCONTEXT"
       above. But if you really have to, you may be able to do this:

           require './sys/syscall.ph';
           my $rc = syscall(SYS_close(), $fd + 0);  # must force numeric
           die "can't sysclose $fd: $!" unless $rc == -1;

       Or, just use the fdopen(3S) feature of "open()":

           {
               open my $fh, "<&=$fd" or die "Cannot reopen fd=$fd: $!";
               close $fh;
           }

   Why can't I use "C:\temp\foo" in DOS paths? Why doesn't `C:\temp\foo.exe` work?
       Whoops!  You just put a tab and a formfeed into that filename!  Remember that within
       double quoted strings ("like\this"), the backslash is an escape character. The full list
       of these is in "Quote and Quote-like Operators" in perlop. Unsurprisingly, you don't have
       a file called "c:(tab)emp(formfeed)oo" or "c:(tab)emp(formfeed)oo.exe" on your legacy DOS
       filesystem.

       Either single-quote your strings, or (preferably) use forward slashes.  Since all DOS and
       Windows versions since something like MS-DOS 2.0 or so have treated "/" and "\" the same
       in a path, you might as well use the one that doesn't clash with Perl--or the POSIX shell,
       ANSI C and C++, awk, Tcl, Java, or Python, just to mention a few. POSIX paths are more
       portable, too.

   Why doesn't glob("*.*") get all the files?
       Because even on non-Unix ports, Perl's glob function follows standard Unix globbing
       semantics. You'll need "glob("*")" to get all (non-hidden) files. This makes glob()
       portable even to legacy systems. Your port may include proprietary globbing functions as
       well. Check its documentation for details.

   Why does Perl let me delete read-only files? Why does "-i" clobber protected files? Isn't this
       a bug in Perl?
       This is elaborately and painstakingly described in the file-dir-perms article in the "Far
       More Than You Ever Wanted To Know" collection in
       <http://www.cpan.org/misc/olddoc/FMTEYEWTK.tgz> .

       The executive summary: learn how your filesystem works. The permissions on a file say what
       can happen to the data in that file.  The permissions on a directory say what can happen
       to the list of files in that directory. If you delete a file, you're removing its name
       from the directory (so the operation depends on the permissions of the directory, not of
       the file). If you try to write to the file, the permissions of the file govern whether
       you're allowed to.

   How do I select a random line from a file?
       Short of loading the file into a database or pre-indexing the lines in the file, there are
       a couple of things that you can do.

       Here's a reservoir-sampling algorithm from the Camel Book:

           srand;
           rand($.) < 1 && ($line = $_) while <>;

       This has a significant advantage in space over reading the whole file in. You can find a
       proof of this method in The Art of Computer Programming, Volume 2, Section 3.4.2, by
       Donald E. Knuth.

       You can use the File::Random module which provides a function for that algorithm:

           use File::Random qw/random_line/;
           my $line = random_line($filename);

       Another way is to use the Tie::File module, which treats the entire file as an array.
       Simply access a random array element.

   Why do I get weird spaces when I print an array of lines?
       (contributed by brian d foy)

       If you are seeing spaces between the elements of your array when you print the array, you
       are probably interpolating the array in double quotes:

           my @animals = qw(camel llama alpaca vicuna);
           print "animals are: @animals\n";

       It's the double quotes, not the "print", doing this. Whenever you interpolate an array in
       a double quote context, Perl joins the elements with spaces (or whatever is in $", which
       is a space by default):

           animals are: camel llama alpaca vicuna

       This is different than printing the array without the interpolation:

           my @animals = qw(camel llama alpaca vicuna);
           print "animals are: ", @animals, "\n";

       Now the output doesn't have the spaces between the elements because the elements of
       @animals simply become part of the list to "print":

           animals are: camelllamaalpacavicuna

       You might notice this when each of the elements of @array end with a newline. You expect
       to print one element per line, but notice that every line after the first is indented:

           this is a line
            this is another line
            this is the third line

       That extra space comes from the interpolation of the array. If you don't want to put
       anything between your array elements, don't use the array in double quotes. You can send
       it to print without them:

           print @lines;

   How do I traverse a directory tree?
       (contributed by brian d foy)

       The File::Find module, which comes with Perl, does all of the hard work to traverse a
       directory structure. It comes with Perl. You simply call the "find" subroutine with a
       callback subroutine and the directories you want to traverse:

           use File::Find;

           find( \&wanted, @directories );

           sub wanted {
               # full path in $File::Find::name
               # just filename in $_
               ... do whatever you want to do ...
           }

       The File::Find::Closures, which you can download from CPAN, provides many ready-to-use
       subroutines that you can use with File::Find.

       The File::Finder, which you can download from CPAN, can help you create the callback
       subroutine using something closer to the syntax of the "find" command-line utility:

           use File::Find;
           use File::Finder;

           my $deep_dirs = File::Finder->depth->type('d')->ls->exec('rmdir','{}');

           find( $deep_dirs->as_options, @places );

       The File::Find::Rule module, which you can download from CPAN, has a similar interface,
       but does the traversal for you too:

           use File::Find::Rule;

           my @files = File::Find::Rule->file()
                                    ->name( '*.pm' )
                                    ->in( @INC );

   How do I delete a directory tree?
       (contributed by brian d foy)

       If you have an empty directory, you can use Perl's built-in "rmdir".  If the directory is
       not empty (so, with files or subdirectories), you either have to empty it yourself (a lot
       of work) or use a module to help you.

       The File::Path module, which comes with Perl, has a "remove_tree" which can take care of
       all of the hard work for you:

           use File::Path qw(remove_tree);

           remove_tree( @directories );

       The File::Path module also has a legacy interface to the older "rmtree" subroutine.

   How do I copy an entire directory?
       (contributed by Shlomi Fish)

       To do the equivalent of "cp -R" (i.e. copy an entire directory tree recursively) in
       portable Perl, you'll either need to write something yourself or find a good CPAN module
       such as  File::Copy::Recursive.

AUTHOR AND COPYRIGHT

       Copyright (c) 1997-2010 Tom Christiansen, Nathan Torkington, and other authors as noted.
       All rights reserved.

       This documentation is free; you can redistribute it and/or modify it under the same terms
       as Perl itself.

       Irrespective of its distribution, all code examples here are in the public domain. You are
       permitted and encouraged to use this code and any derivatives thereof in your own programs
       for fun or for profit as you see fit. A simple comment in the code giving credit to the
       FAQ would be courteous but is not required.