Provided by: perl-doc_5.36.0-9ubuntu1.1_all bug

NAME

       perlhack - How to hack on Perl

DESCRIPTION

       This document explains how Perl development works.  It includes details about the Perl 5
       Porters email list, the Perl repository, the Perl bug tracker, patch guidelines, and
       commentary on Perl development philosophy.

SUPER QUICK PATCH GUIDE

       If you just want to submit a single small patch like a pod fix, a test for a bug, comment
       fixes, etc., it's easy! Here's how:

       •   Check out the source repository

           The perl source is in a git repository.  You can clone the repository with the
           following command:

             % git clone https://github.com/Perl/perl5.git perl

       •   Ensure you're following the latest advice

           In case the advice in this guide has been updated recently, read the latest version
           directly from the perl source:

             % perldoc pod/perlhack.pod

       •   Create a branch for your change

           Create a branch based on blead to commit your change to, which will later be used to
           send it to the Perl issue tracker.

             % git checkout -b mychange

       •   Make your change

           Hack, hack, hack.  Keep in mind that Perl runs on many different platforms, with
           different operating systems that have different capabilities, different filesystem
           organizations, and even different character sets.  perlhacktips gives advice on this.

       •   Test your change

           You can run all the tests with the following commands:

             % ./Configure -des -Dusedevel
             % make test

           Keep hacking until the tests pass.

       •   Commit your change

           Committing your work will save the change on your local system:

             % git commit -a -m 'Commit message goes here'

           Make sure the commit message describes your change in a single sentence.  For example,
           "Fixed spelling errors in perlhack.pod".

       •   Send your change to the Perl issue tracker

           The next step is to submit your patch to the Perl core ticket system.

           Create a GitHub fork of the perl5 repository and add it as a remote, if you haven't
           already, as described in the GitHub documentation at
           <https://help.github.com/en/articles/working-with-forks>.

             % git remote add fork git@github.com:MyUser/perl5.git

           For more information, see "Connecting to GitHub with SSH"
           <https://docs.github.com/en/free-pro-team@latest/github/authenticating-to-
           github/connecting-to-github-with-ssh>.

           If you'd rather use an HTTPS URL for your "git push" see "Cloning with HTTPS URLs"
           <https://docs.github.com/en/free-pro-team@latest/github/using-git/which-remote-url-
           should-i-use#cloning-with-https-urls>.

             % git remote add fork https://github.com/MyUser/perl5.git

           Then, push your new branch to your fork.

             % git push -u fork mychange

           Finally, create a Pull Request on GitHub from your branch to blead as described in the
           GitHub documentation at
           <https://help.github.com/en/articles/creating-a-pull-request-from-a-fork>.

       •   Thank you

           The porters appreciate the time you spent helping to make Perl better.  Thank you!

       •   Acknowledgement

           All contributors are credited (by name and email address) in the AUTHORS file, which
           is part of the perl distribution, as well as the Git commit history.

           If you don’t want to be included in the AUTHORS file, just let us know. Otherwise we
           will take your submission of a patch as permission to credit you in the AUTHORS file.

       •   Next time

           The next time you wish to make a patch, you need to start from the latest perl in a
           pristine state.  Check you don't have any local changes or added files in your perl
           check-out which you wish to keep, then run these commands:

             % git checkout blead
             % git pull
             % git reset --hard origin/blead
             % git clean -dxf

BUG REPORTING

       If you want to report a bug in Perl, or browse existing Perl bugs and patches, use the
       GitHub issue tracker at <https://github.com/perl/perl5/issues>.

       Please check the archive of the perl5-porters list (see below) and/or the bug tracking
       system before submitting a bug report.  Often, you'll find that the bug has been reported
       already.

       You can log in to the bug tracking system and comment on existing bug reports.  If you
       have additional information regarding an existing bug, please add it.  This will help the
       porters fix the bug.

PERL 5 PORTERS

       The perl5-porters (p5p) mailing list is where the Perl standard distribution is maintained
       and developed.  The people who maintain Perl are also referred to as the "Perl 5 Porters",
       "p5p" or just the "porters".

       A searchable archive of the list is available at
       <https://markmail.org/search/?q=perl5-porters>.  There is also an archive at
       <https://archive.develooper.com/perl5-porters@perl.org/>.

   perl-changes mailing list
       The perl5-changes mailing list receives a copy of each patch that gets submitted to the
       maintenance and development branches of the perl repository.  See
       <https://lists.perl.org/list/perl5-changes.html> for subscription and archive information.

   #p5p on IRC
       Many porters are also active on the <irc://irc.perl.org/#p5p> channel.  Feel free to join
       the channel and ask questions about hacking on the Perl core.

GETTING THE PERL SOURCE

       All of Perl's source code is kept centrally in a Git repository at github.com.  The
       repository contains many Perl revisions from Perl 1 onwards and all the revisions from
       Perforce, the previous version control system.

       For much more detail on using git with the Perl repository, please see perlgit.

   Read access via Git
       You will need a copy of Git for your computer.  You can fetch a copy of the repository
       using the git protocol:

         % git clone git@github.com:Perl/perl5.git perl

       This clones the repository and makes a local copy in the perl directory.

       If you cannot use the git protocol for firewall reasons, you can also clone via http:

         % git clone https://github.com/Perl/perl5.git perl

   Read access via the web
       You may access the repository over the web.  This allows you to browse the tree, see
       recent commits, subscribe to repository notifications, search for particular commits and
       more.  You may access it at <https://github.com/Perl/perl5>.

   Write access via git
       If you have a commit bit, please see perlgit for more details on using git.

PATCHING PERL

       If you're planning to do more extensive work than a single small fix, we encourage you to
       read the documentation below.  This will help you focus your work and make your patches
       easier to incorporate into the Perl source.

   Submitting patches
       If you have a small patch to submit, please submit it via the GitHub Pull Request
       workflow.  You may also send patches to the p5p list.

       Patches are reviewed and discussed on GitHub or the p5p list.  Simple, uncontroversial
       patches will usually be applied without any discussion.  When the patch is applied, the
       ticket will be updated and you will receive email.

       In other cases, the patch will need more work or discussion.  You are encouraged to
       participate in the discussion and advocate for your patch.  Sometimes your patch may get
       lost in the shuffle.  It's appropriate to send a reminder email to p5p if no action has
       been taken in a month.  Please remember that the Perl 5 developers are all volunteers, and
       be polite.

       Changes are always applied directly to the main development branch, called "blead".  Some
       patches may be backported to a maintenance branch.  If you think your patch is appropriate
       for the maintenance branch (see "MAINTENANCE BRANCHES" in perlpolicy), please explain why
       when you submit it.

   Getting your patch accepted
       If you are submitting a code patch there are several things that you can do to help the
       Perl 5 Porters accept your patch.

       Patch style

       Using the GitHub Pull Request workflow, your patch will automatically be available in a
       suitable format.  If you wish to submit a patch to the p5p list for review, make sure to
       create it appropriately.

       If you used git to check out the Perl source, then using "git format-patch" will produce a
       patch in a style suitable for Perl.  The "format-patch" command produces one patch file
       for each commit you made.  If you prefer to send a single patch for all commits, you can
       use "git diff".

         % git checkout blead
         % git pull
         % git diff blead my-branch-name

       This produces a patch based on the difference between blead and your current branch.  It's
       important to make sure that blead is up to date before producing the diff, that's why we
       call "git pull" first.

       We strongly recommend that you use git if possible.  It will make your life easier, and
       ours as well.

       However, if you're not using git, you can still produce a suitable patch.  You'll need a
       pristine copy of the Perl source to diff against.  The porters prefer unified diffs.
       Using GNU "diff", you can produce a diff like this:

         % diff -Npurd perl.pristine perl.mine

       Make sure that you "make realclean" in your copy of Perl to remove any build artifacts, or
       you may get a confusing result.

       Commit message

       As you craft each patch you intend to submit to the Perl core, it's important to write a
       good commit message.  This is especially important if your submission will consist of a
       series of commits.

       The first line of the commit message should be a short description without a period.  It
       should be no longer than the subject line of an email, 50 characters being a good rule of
       thumb.

       A lot of Git tools (Gitweb, GitHub, git log --pretty=oneline, ...) will only display the
       first line (cut off at 50 characters) when presenting commit summaries.

       The commit message should include a description of the problem that the patch corrects or
       new functionality that the patch adds.

       As a general rule of thumb, your commit message should help a programmer who knows the
       Perl core quickly understand what you were trying to do, how you were trying to do it, and
       why the change matters to Perl.

       •   Why

           Your commit message should describe why the change you are making is important.  When
           someone looks at your change in six months or six years, your intent should be clear.

           If you're deprecating a feature with the intent of later simplifying another bit of
           code, say so.  If you're fixing a performance problem or adding a new feature to
           support some other bit of the core, mention that.

       •   What

           Your commit message should describe what part of the Perl core you're changing and
           what you expect your patch to do.

       •   How

           While it's not necessary for documentation changes, new tests or trivial patches, it's
           often worth explaining how your change works.  Even if it's clear to you today, it may
           not be clear to a porter next month or next year.

       A commit message isn't intended to take the place of comments in your code.  Commit
       messages should describe the change you made, while code comments should describe the
       current state of the code.

       If you've just implemented a new feature, complete with doc, tests and well-commented
       code, a brief commit message will often suffice.  If, however, you've just changed a
       single character deep in the parser or lexer, you might need to write a small novel to
       ensure that future readers understand what you did and why you did it.

       Comments, Comments, Comments

       Be sure to adequately comment your code.  While commenting every line is unnecessary,
       anything that takes advantage of side effects of operators, that creates changes that will
       be felt outside of the function being patched, or that others may find confusing should be
       documented.  If you are going to err, it is better to err on the side of adding too many
       comments than too few.

       The best comments explain why the code does what it does, not what it does.

       Style

       In general, please follow the particular style of the code you are patching.

       In particular, follow these general guidelines for patching Perl sources:

       •   4-wide indents for code, 2-wide indents for nested CPP "#define"s, with 8-wide
           tabstops.

       •   Use spaces for indentation, not tab characters.

           The codebase is a mixture of tabs and spaces for indentation, and we are moving to
           spaces only.  Converting lines you're patching from 8-wide tabs to spaces will help
           this migration.

       •   Try not to exceed 79 columns

           In general, we target 80 column lines.  When sticking to 80 columns would lead to
           torturous code or rework, it's fine to go longer.  Try to keep your excess past 80 to
           a minimum.

       •   ANSI C prototypes

       •   Uncuddled elses and "K&R" style for indenting control constructs

       •   No C++ style (//) comments

       •   Mark places that need to be revisited with XXX (and revisit often!)

       •   Opening brace lines up with "if" when conditional spans multiple lines; should be at
           end-of-line otherwise

       •   In function definitions, name starts in column 0 (return value-type is on previous
           line)

       •   Single space after keywords that are followed by parens, no space between function
           name and following paren

       •   Avoid assignments in conditionals, but if they're unavoidable, use extra paren, e.g.
           "if (a && (b = c)) ..."

       •   "return foo;" rather than "return(foo);"

       •   "if (!foo) ..." rather than "if (foo == FALSE) ..." etc.

       •   Do not declare variables using "register".  It may be counterproductive with modern
           compilers, and is deprecated in C++, under which the Perl source is regularly
           compiled.

       •   In-line functions that are in headers that are accessible to XS code need to be able
           to compile without warnings with commonly used extra compilation flags, such as gcc's
           "-Wswitch-default" which warns whenever a switch statement does not have a "default"
           case.  The use of these extra flags is to catch potential problems in legal C code,
           and is often used by Perl aggregators, such as Linux distributors.

       Test suite

       If your patch changes code (rather than just changing documentation), you should also
       include one or more test cases which illustrate the bug you're fixing or validate the new
       functionality you're adding.  In general, you should update an existing test file rather
       than create a new one.

       Your test suite additions should generally follow these guidelines (courtesy of Gurusamy
       Sarathy <gsar@activestate.com>):

       •   Know what you're testing.  Read the docs, and the source.

       •   Tend to fail, not succeed.

       •   Interpret results strictly.

       •   Use unrelated features (this will flush out bizarre interactions).

       •   Use non-standard idioms (otherwise you are not testing TIMTOWTDI).

       •   Avoid using hardcoded test numbers whenever possible (the EXPECTED/GOT found in
           t/op/tie.t is much more maintainable, and gives better failure reports).

       •   Give meaningful error messages when a test fails.

       •   Avoid using qx// and system() unless you are testing for them.  If you do use them,
           make sure that you cover _all_ perl platforms.

       •   Unlink any temporary files you create.

       •   Promote unforeseen warnings to errors with $SIG{__WARN__}.

       •   Be sure to use the libraries and modules shipped with the version being tested, not
           those that were already installed.

       •   Add comments to the code explaining what you are testing for.

       •   Make updating the '1..42' string unnecessary.  Or make sure that you update it.

       •   Test _all_ behaviors of a given operator, library, or function.

           Test all optional arguments.

           Test return values in various contexts (boolean, scalar, list, lvalue).

           Use both global and lexical variables.

           Don't forget the exceptional, pathological cases.

   Patching a core module
       This works just like patching anything else, with one extra consideration.

       Modules in the cpan/ directory of the source tree are maintained outside of the Perl core.
       When the author updates the module, the updates are simply copied into the core.  See that
       module's documentation or its listing on <https://metacpan.org/> for more information on
       reporting bugs and submitting patches.

       In most cases, patches to modules in cpan/ should be sent upstream and should not be
       applied to the Perl core individually.  If a patch to a file in cpan/ absolutely cannot
       wait for the fix to be made upstream, released to CPAN and copied to blead, you must add
       (or update) a "CUSTOMIZED" entry in the Porting/Maintainers.pl file to flag that a local
       modification has been made.  See Porting/Maintainers.pl for more details.

       In contrast, modules in the dist/ directory are maintained in the core.

   Updating perldelta
       For changes significant enough to warrant a pod/perldelta.pod entry, the porters will
       greatly appreciate it if you submit a delta entry along with your actual change.
       Significant changes include, but are not limited to:

       •   Adding, deprecating, or removing core features

       •   Adding, deprecating, removing, or upgrading core or dual-life modules

       •   Adding new core tests

       •   Fixing security issues and user-visible bugs in the core

       •   Changes that might break existing code, either on the perl or C level

       •   Significant performance improvements

       •   Adding, removing, or significantly changing documentation in the pod/ directory

       •   Important platform-specific changes

       Please make sure you add the perldelta entry to the right section within
       pod/perldelta.pod.  More information on how to write good perldelta entries is available
       in the "Style" section of Porting/how_to_write_a_perldelta.pod.

   What makes for a good patch?
       New features and extensions to the language can be contentious.  There is no specific set
       of criteria which determine what features get added, but here are some questions to
       consider when developing a patch:

       Does the concept match the general goals of Perl?

       Our goals include, but are not limited to:

       1.  Keep it fast, simple, and useful.

       2.  Keep features/concepts as orthogonal as possible.

       3.  No arbitrary limits (platforms, data sizes, cultures).

       4.  Keep it open and exciting to use/patch/advocate Perl everywhere.

       5.  Either assimilate new technologies, or build bridges to them.

       Where is the implementation?

       All the talk in the world is useless without an implementation.  In almost every case, the
       person or people who argue for a new feature will be expected to be the ones who implement
       it.  Porters capable of coding new features have their own agendas, and are not available
       to implement your (possibly good) idea.

       Backwards compatibility

       It's a cardinal sin to break existing Perl programs.  New warnings can be
       contentious--some say that a program that emits warnings is not broken, while others say
       it is.  Adding keywords has the potential to break programs, changing the meaning of
       existing token sequences or functions might break programs.

       The Perl 5 core includes mechanisms to help porters make backwards incompatible changes
       more compatible such as the feature and deprecate modules.  Please use them when
       appropriate.

       Could it be a module instead?

       Perl 5 has extension mechanisms, modules and XS, specifically to avoid the need to keep
       changing the Perl interpreter.  You can write modules that export functions, you can give
       those functions prototypes so they can be called like built-in functions, you can even
       write XS code to mess with the runtime data structures of the Perl interpreter if you want
       to implement really complicated things.

       Whenever possible, new features should be prototyped in a CPAN module before they will be
       considered for the core.

       Is the feature generic enough?

       Is this something that only the submitter wants added to the language, or is it broadly
       useful?  Sometimes, instead of adding a feature with a tight focus, the porters might
       decide to wait until someone implements the more generalized feature.

       Does it potentially introduce new bugs?

       Radical rewrites of large chunks of the Perl interpreter have the potential to introduce
       new bugs.

       How big is it?

       The smaller and more localized the change, the better.  Similarly, a series of small
       patches is greatly preferred over a single large patch.

       Does it preclude other desirable features?

       A patch is likely to be rejected if it closes off future avenues of development.  For
       instance, a patch that placed a true and final interpretation on prototypes is likely to
       be rejected because there are still options for the future of prototypes that haven't been
       addressed.

       Is the implementation robust?

       Good patches (tight code, complete, correct) stand more chance of going in.  Sloppy or
       incorrect patches might be placed on the back burner until fixes can be made, or they
       might be discarded altogether without further notice.

       Is the implementation generic enough to be portable?

       The worst patches make use of system-specific features.  It's highly unlikely that non-
       portable additions to the Perl language will be accepted.

       Is the implementation tested?

       Patches which change behaviour (fixing bugs or introducing new features) must include
       regression tests to verify that everything works as expected.

       Without tests provided by the original author, how can anyone else changing perl in the
       future be sure that they haven't unwittingly broken the behaviour the patch implements?
       And without tests, how can the patch's author be confident that his/her hard work put into
       the patch won't be accidentally thrown away by someone in the future?

       Is there enough documentation?

       Patches without documentation are probably ill-thought out or incomplete.  No features can
       be added or changed without documentation, so submitting a patch for the appropriate pod
       docs as well as the source code is important.

       Is there another way to do it?

       Larry said "Although the Perl Slogan is There's More Than One Way to Do It, I hesitate to
       make 10 ways to do something".  This is a tricky heuristic to navigate, though--one man's
       essential addition is another man's pointless cruft.

       Does it create too much work?

       Work for the committers, work for Perl programmers, work for module authors, ... Perl is
       supposed to be easy.

       Patches speak louder than words

       Working code is always preferred to pie-in-the-sky ideas.  A patch to add a feature stands
       a much higher chance of making it to the language than does a random feature request, no
       matter how fervently argued the request might be.  This ties into "Will it be useful?", as
       the fact that someone took the time to make the patch demonstrates a strong desire for the
       feature.

TESTING

       The core uses the same testing style as the rest of Perl, a simple "ok/not ok" run through
       Test::Harness, but there are a few special considerations.

       There are three ways to write a test in the core: Test::More, t/test.pl and ad hoc "print
       $test ? "ok 42\n" : "not ok 42\n"".  The decision of which to use depends on what part of
       the test suite you're working on.  This is a measure to prevent a high-level failure (such
       as Config.pm breaking) from causing basic functionality tests to fail.

       The t/test.pl library provides some of the features of Test::More, but avoids loading most
       modules and uses as few core features as possible.

       If you write your own test, use the Test Anything Protocol <https://testanything.org>.

       •   t/base, t/comp and t/opbasic

           Since we don't know if "require" works, or even subroutines, use ad hoc tests for
           these three.  Step carefully to avoid using the feature being tested.  Tests in
           t/opbasic, for instance, have been placed there rather than in t/op because they test
           functionality which t/test.pl presumes has already been demonstrated to work.

       •   All other subdirectories of t/

           Now that basic require() and subroutines are tested, you can use the t/test.pl
           library.

           You can also use certain libraries like Config conditionally, but be sure to skip the
           test gracefully if it's not there.

       •   Test files not found under t/

           This category includes .t files underneath directories such as dist, ext and lib.
           Since the core of Perl has now been tested, Test::More can and now should be used.
           You can also use the full suite of core modules in the tests.  (As noted in "Patching
           a core module" above, changes to .t files found under cpan/ should be submitted to the
           upstream maintainers of those modules.)

       When you say "make test", Perl uses the t/TEST program to run the test suite (except under
       Win32 where it uses t/harness instead).  All tests are run from the t/ directory, not the
       directory which contains the test.  This causes some problems with the tests in lib/, so
       here's some opportunity for some patching.

       You must be triply conscious of cross-platform concerns.  This usually boils down to using
       File::Spec, avoiding things like "fork()" and "system()" unless absolutely necessary, and
       not assuming that a given character has a particular ordinal value (code point) or that
       its UTF-8 representation is composed of particular bytes.

       There are several functions available to specify characters and code points portably in
       tests.  The always-preloaded functions "utf8::unicode_to_native()" and its inverse
       "utf8::native_to_unicode()" take code points and translate appropriately.  The file
       t/charset_tools.pl has several functions that can be useful.  It has versions of the
       previous two functions that take strings as inputs -- not single numeric code points:
       "uni_to_native()" and "native_to_uni()".  If you must look at the individual bytes
       comprising a UTF-8 encoded string, "byte_utf8a_to_utf8n()" takes as input a string of
       those bytes encoded for an ASCII platform, and returns the equivalent string in the native
       platform.  For example, "byte_utf8a_to_utf8n("\xC2\xA0")" returns the byte sequence on the
       current platform that form the UTF-8 for "U+00A0", since "\xC2\xA0" are the UTF-8 bytes on
       an ASCII platform for that code point.  This function returns "\xC2\xA0" on an ASCII
       platform, and "\x80\x41" on an EBCDIC 1047 one.

       But easiest is, if the character is specifiable as a literal, like "A" or "%", to use
       that; if not so specificable, you can use "\N{}" , if the side effects aren't troublesome.
       Simply specify all your characters in hex, using "\N{U+ZZ}" instead of "\xZZ".  "\N{}" is
       the Unicode name, and so it always gives you the Unicode character.  "\N{U+41}" is the
       character whose Unicode code point is 0x41, hence is 'A' on all platforms.  The side
       effects are:

       •   These select Unicode rules.  That means that in double-quotish strings, the string is
           always converted to UTF-8 to force a Unicode interpretation (you can
           "utf8::downgrade()" afterwards to convert back to non-UTF8, if possible).  In regular
           expression patterns, the conversion isn't done, but if the character set modifier
           would otherwise be "/d", it is changed to "/u".

       •   If you use the form "\N{character name}", the charnames module gets automatically
           loaded.  This may not be suitable for the test level you are doing.

       If you are testing locales (see perllocale), there are helper functions in t/loc_tools.pl
       to enable you to see what locales there are on the current platform.

   Special "make test" targets
       There are various special make targets that can be used to test Perl slightly differently
       than the standard "test" target.  Not all them are expected to give a 100% success rate.
       Many of them have several aliases, and many of them are not available on certain operating
       systems.

       •   test_porting

           This runs some basic sanity tests on the source tree and helps catch basic errors
           before you submit a patch.

       •   minitest

           Run miniperl on t/base, t/comp, t/cmd, t/run, t/io, t/op, t/uni and t/mro tests.

           miniperl is a minimalistic perl built to bootstrap building extensions, utilties,
           documentation etc.  It doesn't support dynamic loading and depending on the point in
           the build process will only have access to a limited set of core modules.  miniperl is
           not intended for day to day use.

       •   test.valgrind check.valgrind

           (Only in Linux) Run all the tests using the memory leak + naughty memory access tool
           "valgrind".  The log files will be named testname.valgrind.

       •   test_harness

           Run the test suite with the t/harness controlling program, instead of t/TEST.
           t/harness is more sophisticated, and uses the Test::Harness module, thus using this
           test target supposes that perl mostly works.  The main advantage for our purposes is
           that it prints a detailed summary of failed tests at the end.  Also, unlike t/TEST, it
           doesn't redirect stderr to stdout.

           Note that under Win32 t/harness is always used instead of t/TEST, so there is no
           special "test_harness" target.

           Under Win32's "test" target you may use the TEST_SWITCHES and TEST_FILES environment
           variables to control the behaviour of t/harness.  This means you can say

               nmake test TEST_FILES="op/*.t"
               nmake test TEST_SWITCHES="-torture" TEST_FILES="op/*.t"

       •   test-notty test_notty

           Sets PERL_SKIP_TTY_TEST to true before running normal test.

   Parallel tests
       The core distribution can now run its regression tests in parallel on Unix-like and
       Windows platforms.  On Unix, instead of running "make test", set "TEST_JOBS" in your
       environment to the number of tests to run in parallel, and run "make test_harness".  On a
       Bourne-like shell, this can be done as

           TEST_JOBS=3 make test_harness  # Run 3 tests in parallel

       An environment variable is used, rather than parallel make itself, because TAP::Harness
       needs to be able to schedule individual non-conflicting test scripts itself, and there is
       no standard interface to "make" utilities to interact with their job schedulers.

       Tests are normally run in a logical order, with the sanity tests first, then the main
       tests of the Perl core functionality, then the tests for the non-core modules.  On many-
       core systems, this may not use the hardware as effectively as possible.  By also
       specifying

        TEST_JOBS=19 PERL_TEST_HARNESS_ASAP=1 make -j19 test_harness

       you signal that you want the tests to finish in wall-clock time as short as possible.
       After the sanity tests are completed, this causes the remaining ones to be packed into the
       available cores as tightly as we know how.  This has its greatest effect on slower, many-
       core systems.  Throughput was sped up by 20% on an outmoded 24-core system; less on more
       recent faster ones with fewer cores.

       Note that the command line above added a "-j" parameter to make, so as to cause parallel
       compilation.  This may or may not work on your platform.

   Running tests by hand
       You can run part of the test suite by hand by using one of the following commands from the
       t/ directory:

           ./perl -I../lib TEST list-of-.t-files

       or

           ./perl -I../lib harness list-of-.t-files

       (If you don't specify test scripts, the whole test suite will be run.)

   Using t/harness for testing
       If you use "harness" for testing, you have several command line options available to you.
       The arguments are as follows, and are in the order that they must appear if used together.

           harness -v -torture -re=pattern LIST OF FILES TO TEST
           harness -v -torture -re LIST OF PATTERNS TO MATCH

       If "LIST OF FILES TO TEST" is omitted, the file list is obtained from the manifest.  The
       file list may include shell wildcards which will be expanded out.

       •   -v

           Run the tests under verbose mode so you can see what tests were run, and debug output.

       •   -torture

           Run the torture tests as well as the normal set.

       •   -re=PATTERN

           Filter the file list so that all the test files run match PATTERN.  Note that this
           form is distinct from the -re LIST OF PATTERNS form below in that it allows the file
           list to be provided as well.

       •   -re LIST OF PATTERNS

           Filter the file list so that all the test files run match /(LIST|OF|PATTERNS)/.  Note
           that with this form the patterns are joined by '|' and you cannot supply a list of
           files, instead the test files are obtained from the MANIFEST.

       You can run an individual test by a command similar to

           ./perl -I../lib path/to/foo.t

       except that the harnesses set up some environment variables that may affect the execution
       of the test:

       •   PERL_CORE=1

           indicates that we're running this test as part of the perl core test suite.  This is
           useful for modules that have a dual life on CPAN.

       •   PERL_DESTRUCT_LEVEL=2

           is set to 2 if it isn't set already (see "PERL_DESTRUCT_LEVEL" in perlhacktips).

       •   PERL

           (used only by t/TEST) if set, overrides the path to the perl executable that should be
           used to run the tests (the default being ./perl).

       •   PERL_SKIP_TTY_TEST

           if set, tells to skip the tests that need a terminal.  It's actually set automatically
           by the Makefile, but can also be forced artificially by running 'make test_notty'.

       Other environment variables that may influence tests

       •   PERL_TEST_Net_Ping

           Setting this variable runs all the Net::Ping modules tests, otherwise some tests that
           interact with the outside world are skipped.  See perl58delta.

       •   PERL_TEST_NOVREXX

           Setting this variable skips the vrexx.t tests for OS2::REXX.

       •   PERL_TEST_NUMCONVERTS

           This sets a variable in op/numconvert.t.

       •   PERL_TEST_MEMORY

           Setting this variable includes the tests in t/bigmem/.  This should be set to the
           number of gigabytes of memory available for testing, eg.  "PERL_TEST_MEMORY=4"
           indicates that tests that require 4GiB of available memory can be run safely.

       See also the documentation for the Test and Test::Harness modules, for more environment
       variables that affect testing.

   Performance testing
       The file t/perf/benchmarks contains snippets of perl code which are intended to be
       benchmarked across a range of perls by the Porting/bench.pl tool. If you fix or enhance a
       performance issue, you may want to add a representative code sample to the file, then run
       bench.pl against the previous and current perls to see what difference it has made, and
       whether anything else has slowed down as a consequence.

       The file t/perf/opcount.t is designed to test whether a particular code snippet has been
       compiled into an optree containing specified numbers of particular op types. This is good
       for testing whether optimisations which alter ops, such as converting an "aelem" op into
       an "aelemfast" op, are really doing that.

       The files t/perf/speed.t and t/re/speed.t are designed to test things that run thousands
       of times slower if a particular optimisation is broken (for example, the utf8 length cache
       on long utf8 strings).  Add a test that will take a fraction of a second normally, and
       minutes otherwise, causing the test file to time out on failure.

   Building perl at older commits
       In the course of hacking on the Perl core distribution, you may have occasion to
       configure, build and test perl at an old commit.  Sometimes "make" will fail during this
       process.  If that happens, you may be able to salvage the situation by using the
       Devel::PatchPerl library from CPAN (not included in the core) to bring the source code at
       that commit to a buildable state.

       Here's a real world example, taken from work done to resolve perl #10118
       <https://github.com/Perl/perl5/issues/10118>.  Use of Porting/bisect.pl had identified
       commit "ba77e4cc9d1ceebf472c9c5c18b2377ee47062e6" as the commit in which a bug was
       corrected.  To confirm, a P5P developer wanted to configure and build perl at commit
       "ba77e4c^" (presumably "bad") and then at "ba77e4c" (presumably "good").  Normal
       configuration and build was attempted:

           $ sh ./Configure -des -Dusedevel
           $ make test_prep

       "make", however, failed with output (excerpted) like this:

           cc -fstack-protector -L/usr/local/lib -o miniperl \
             gv.o toke.o perly.o pad.o regcomp.o dump.o util.o \
             mg.o reentr.o mro.o hv.o av.o run.o pp_hot.o sv.o \
             pp.o scope.o pp_ctl.o pp_sys.o doop.o doio.o regexec.o \
             utf8.o taint.o deb.o universal.o globals.o perlio.o \
             numeric.o mathoms.o locale.o pp_pack.o pp_sort.o  \
             miniperlmain.o opmini.o perlmini.o
           pp.o: In function `Perl_pp_pow':
           pp.c:(.text+0x2db9): undefined reference to `pow'
           ...
           collect2: error: ld returned 1 exit status
           makefile:348: recipe for target 'miniperl' failed
           make: *** [miniperl] Error 1

       Another P5P contributor recommended installation and use of Devel::PatchPerl for this
       situation, first to determine the version of perl at the commit in question, then to patch
       the source code at that point to facilitate a build.

        $ perl -MDevel::PatchPerl -e \
            'print Devel::PatchPerl->determine_version("/path/to/sourcecode"),
                   "\n";'
        5.11.1
        $ perl -MDevel::PatchPerl -e \
            'Devel::PatchPerl->patch_source("5.11.1", "/path/to/sourcecode");'

       Once the source was patched, "./Configure" and "make test_prep" were called and completed
       successfully, enabling confirmation of the findings in RT #72414.

MORE READING FOR GUTS HACKERS

       To hack on the Perl guts, you'll need to read the following things:

       •   perlsource

           An overview of the Perl source tree.  This will help you find the files you're looking
           for.

       •   perlinterp

           An overview of the Perl interpreter source code and some details on how Perl does what
           it does.

       •   perlhacktut

           This document walks through the creation of a small patch to Perl's C code.  If you're
           just getting started with Perl core hacking, this will help you understand how it
           works.

       •   perlhacktips

           More details on hacking the Perl core.  This document focuses on lower level details
           such as how to write tests, compilation issues, portability, debugging, etc.

           If you plan on doing serious C hacking, make sure to read this.

       •   perlguts

           This is of paramount importance, since it's the documentation of what goes where in
           the Perl source.  Read it over a couple of times and it might start to make sense -
           don't worry if it doesn't yet, because the best way to study it is to read it in
           conjunction with poking at Perl source, and we'll do that later on.

           Gisle Aas's "illustrated perlguts", also known as illguts, has very helpful pictures:

           <https://metacpan.org/release/RURBAN/illguts-0.49>

       •   perlxstut and perlxs

           A working knowledge of XSUB programming is incredibly useful for core hacking; XSUBs
           use techniques drawn from the PP code, the portion of the guts that actually executes
           a Perl program.  It's a lot gentler to learn those techniques from simple examples and
           explanation than from the core itself.

       •   perlapi

           The documentation for the Perl API explains what some of the internal functions do, as
           well as the many macros used in the source.

       •   Porting/pumpkin.pod

           This is a collection of words of wisdom for a Perl porter; some of it is only useful
           to the pumpkin holders, but most of it applies to anyone wanting to go about Perl
           development.

CPAN TESTERS AND PERL SMOKERS

       The CPAN testers ( <http://cpantesters.org/> ) are a group of volunteers who test CPAN
       modules on a variety of platforms.

       Perl Smokers ( <https://www.nntp.perl.org/group/perl.daily-build/> and
       <https://www.nntp.perl.org/group/perl.daily-build.reports/> ) automatically test Perl
       source releases on platforms with various configurations.

       Both efforts welcome volunteers.  In order to get involved in smoke testing of the perl
       itself visit <https://metacpan.org/release/Test-Smoke>.  In order to start smoke testing
       CPAN modules visit <https://metacpan.org/release/CPANPLUS-YACSmoke> or
       <https://metacpan.org/release/minismokebox> or
       <https://metacpan.org/release/CPAN-Reporter>.

WHAT NEXT?

       If you've read all the documentation in the document and the ones listed above, you're
       more than ready to hack on Perl.

       Here's some more recommendations

       •   Subscribe to perl5-porters, follow the patches and try and understand them; don't be
           afraid to ask if there's a portion you're not clear on - who knows, you may unearth a
           bug in the patch...

       •   Do read the README associated with your operating system, e.g.  README.aix on the IBM
           AIX OS.  Don't hesitate to supply patches to that README if you find anything missing
           or changed over a new OS release.

       •   Find an area of Perl that seems interesting to you, and see if you can work out how it
           works.  Scan through the source, and step over it in the debugger.  Play, poke,
           investigate, fiddle! You'll probably get to understand not just your chosen area but a
           much wider range of perl's activity as well, and probably sooner than you'd think.

   "The Road goes ever on and on, down from the door where it began."
       If you can do these things, you've started on the long road to Perl porting.  Thanks for
       wanting to help make Perl better - and happy hacking!

   Metaphoric Quotations
       If you recognized the quote about the Road above, you're in luck.

       Most software projects begin each file with a literal description of each file's purpose.
       Perl instead begins each with a literary allusion to that file's purpose.

       Like chapters in many books, all top-level Perl source files (along with a few others here
       and there) begin with an epigrammatic inscription that alludes, indirectly and
       metaphorically, to the material you're about to read.

       Quotations are taken from writings of J.R.R. Tolkien pertaining to his Legendarium, almost
       always from The Lord of the Rings.  Chapters and page numbers are given using the
       following editions:

       •   The Hobbit, by J.R.R. Tolkien.  The hardcover, 70th-anniversary edition of 2007 was
           used, published in the UK by Harper Collins Publishers and in the US by the Houghton
           Mifflin Company.

       •   The Lord of the Rings, by J.R.R. Tolkien.  The hardcover, 50th-anniversary edition of
           2004 was used, published in the UK by Harper Collins Publishers and in the US by the
           Houghton Mifflin Company.

       •   The Lays of Beleriand, by J.R.R. Tolkien and published posthumously by his son and
           literary executor, C.J.R. Tolkien, being the 3rd of the 12 volumes in Christopher's
           mammoth History of Middle Earth.  Page numbers derive from the hardcover edition,
           first published in 1983 by George Allen & Unwin; no page numbers changed for the
           special 3-volume omnibus edition of 2002 or the various trade-paper editions, all
           again now by Harper Collins or Houghton Mifflin.

       Other JRRT books fair game for quotes would thus include The Adventures of Tom Bombadil,
       The Silmarillion, Unfinished Tales, and The Tale of the Children of Hurin, all but the
       first posthumously assembled by CJRT.  But The Lord of the Rings itself is perfectly fine
       and probably best to quote from, provided you can find a suitable quote there.

       So if you were to supply a new, complete, top-level source file to add to Perl, you should
       conform to this peculiar practice by yourself selecting an appropriate quotation from
       Tolkien, retaining the original spelling and punctuation and using the same format the
       rest of the quotes are in.  Indirect and oblique is just fine; remember, it's a metaphor,
       so being meta is, after all, what it's for.

AUTHOR

       This document was originally written by Nathan Torkington, and is maintained by the
       perl5-porters mailing list.