Provided by: perl-doc_5.36.0-9ubuntu1.1_all bug

NAME

       perlop - Perl operators and precedence

DESCRIPTION

       In Perl, the operator determines what operation is performed, independent of the type of
       the operands.  For example "$x + $y" is always a numeric addition, and if $x or $y do not
       contain numbers, an attempt is made to convert them to numbers first.

       This is in contrast to many other dynamic languages, where the operation is determined by
       the type of the first argument.  It also means that Perl has two versions of some
       operators, one for numeric and one for string comparison.  For example "$x == $y" compares
       two numbers for equality, and "$x eq $y" compares two strings.

       There are a few exceptions though: "x" can be either string repetition or list repetition,
       depending on the type of the left operand, and "&", "|", "^" and "~" can be either string
       or numeric bit operations.

   Operator Precedence and Associativity
       Operator precedence and associativity work in Perl more or less like they do in
       mathematics.

       Operator precedence means some operators group more tightly than others.  For example, in
       "2 + 4 * 5", the multiplication has higher precedence, so "4 * 5" is grouped together as
       the right-hand operand of the addition, rather than "2 + 4" being grouped together as the
       left-hand operand of the multiplication. It is as if the expression were written "2 + (4 *
       5)", not "(2 + 4) * 5". So the expression yields "2 + 20 == 22", rather than "6 * 5 ==
       30".

       Operator associativity defines what happens if a sequence of the same operators is used
       one after another: usually that they will be grouped at the left or the right. For
       example, in "9 - 3 - 2", subtraction is left associative, so "9 - 3" is grouped together
       as the left-hand operand of the second subtraction, rather than "3 - 2" being grouped
       together as the right-hand operand of the first subtraction. It is as if the expression
       were written "(9 - 3) - 2", not "9 - (3 - 2)". So the expression yields "6 - 2 == 4",
       rather than "9 - 1 == 8".

       For simple operators that evaluate all their operands and then combine the values in some
       way, precedence and associativity (and parentheses) imply some ordering requirements on
       those combining operations. For example, in "2 + 4 * 5", the grouping implied by
       precedence means that the multiplication of 4 and 5 must be performed before the addition
       of 2 and 20, simply because the result of that multiplication is required as one of the
       operands of the addition. But the order of operations is not fully determined by this: in
       "2 * 2 + 4 * 5" both multiplications must be performed before the addition, but the
       grouping does not say anything about the order in which the two multiplications are
       performed. In fact Perl has a general rule that the operands of an operator are evaluated
       in left-to-right order. A few operators such as "&&=" have special evaluation rules that
       can result in an operand not being evaluated at all; in general, the top-level operator in
       an expression has control of operand evaluation.

       Some comparison operators, as their associativity, chain with some operators of the same
       precedence (but never with operators of different precedence).  This chaining means that
       each comparison is performed on the two arguments surrounding it, with each interior
       argument taking part in two comparisons, and the comparison results are implicitly ANDed.
       Thus "$x < $y <= $z" behaves exactly like "$x < $y && $y <= $z", assuming that "$y" is as
       simple a scalar as it looks.  The ANDing short-circuits just like "&&" does, stopping the
       sequence of comparisons as soon as one yields false.

       In a chained comparison, each argument expression is evaluated at most once, even if it
       takes part in two comparisons, but the result of the evaluation is fetched for each
       comparison.  (It is not evaluated at all if the short-circuiting means that it's not
       required for any comparisons.)  This matters if the computation of an interior argument is
       expensive or non-deterministic.  For example,

           if($x < expensive_sub() <= $z) { ...

       is not entirely like

           if($x < expensive_sub() && expensive_sub() <= $z) { ...

       but instead closer to

           my $tmp = expensive_sub();
           if($x < $tmp && $tmp <= $z) { ...

       in that the subroutine is only called once.  However, it's not exactly like this latter
       code either, because the chained comparison doesn't actually involve any temporary
       variable (named or otherwise): there is no assignment.  This doesn't make much difference
       where the expression is a call to an ordinary subroutine, but matters more with an lvalue
       subroutine, or if the argument expression yields some unusual kind of scalar by other
       means.  For example, if the argument expression yields a tied scalar, then the expression
       is evaluated to produce that scalar at most once, but the value of that scalar may be
       fetched up to twice, once for each comparison in which it is actually used.

       In this example, the expression is evaluated only once, and the tied scalar (the result of
       the expression) is fetched for each comparison that uses it.

           if ($x < $tied_scalar < $z) { ...

       In the next example, the expression is evaluated only once, and the tied scalar is fetched
       once as part of the operation within the expression.  The result of that operation is
       fetched for each comparison, which normally doesn't matter unless that expression result
       is also magical due to operator overloading.

           if ($x < $tied_scalar + 42 < $z) { ...

       Some operators are instead non-associative, meaning that it is a syntax error to use a
       sequence of those operators of the same precedence.  For example, "$x .. $y .. $z" is an
       error.

       Perl operators have the following associativity and precedence, listed from highest
       precedence to lowest.  Operators borrowed from C keep the same precedence relationship
       with each other, even where C's precedence is slightly screwy.  (This makes learning Perl
       easier for C folks.)  With very few exceptions, these all operate on scalar values only,
       not array values.

           left        terms and list operators (leftward)
           left        ->
           nonassoc    ++ --
           right       **
           right       ! ~ ~. \ and unary + and -
           left        =~ !~
           left        * / % x
           left        + - .
           left        << >>
           nonassoc    named unary operators
           nonassoc    isa
           chained     < > <= >= lt gt le ge
           chain/na    == != eq ne <=> cmp ~~
           left        & &.
           left        | |. ^ ^.
           left        &&
           left        || //
           nonassoc    ..  ...
           right       ?:
           right       = += -= *= etc. goto last next redo dump
           left        , =>
           nonassoc    list operators (rightward)
           right       not
           left        and
           left        or xor

       In the following sections, these operators are covered in detail, in the same order in
       which they appear in the table above.

       Many operators can be overloaded for objects.  See overload.

   Terms and List Operators (Leftward)
       A TERM has the highest precedence in Perl.  They include variables, quote and quote-like
       operators, any expression in parentheses, and any function whose arguments are
       parenthesized.  Actually, there aren't really functions in this sense, just list operators
       and unary operators behaving as functions because you put parentheses around the
       arguments.  These are all documented in perlfunc.

       If any list operator ("print()", etc.) or any unary operator ("chdir()", etc.)  is
       followed by a left parenthesis as the next token, the operator and arguments within
       parentheses are taken to be of highest precedence, just like a normal function call.

       In the absence of parentheses, the precedence of list operators such as "print", "sort",
       or "chmod" is either very high or very low depending on whether you are looking at the
       left side or the right side of the operator.  For example, in

           @ary = (1, 3, sort 4, 2);
           print @ary;         # prints 1324

       the commas on the right of the "sort" are evaluated before the "sort", but the commas on
       the left are evaluated after.  In other words, list operators tend to gobble up all
       arguments that follow, and then act like a simple TERM with regard to the preceding
       expression.  Be careful with parentheses:

           # These evaluate exit before doing the print:
           print($foo, exit);  # Obviously not what you want.
           print $foo, exit;   # Nor is this.

           # These do the print before evaluating exit:
           (print $foo), exit; # This is what you want.
           print($foo), exit;  # Or this.
           print ($foo), exit; # Or even this.

       Also note that

           print ($foo & 255) + 1, "\n";

       probably doesn't do what you expect at first glance.  The parentheses enclose the argument
       list for "print" which is evaluated (printing the result of "$foo & 255").  Then one is
       added to the return value of "print" (usually 1).  The result is something like this:

           1 + 1, "\n";    # Obviously not what you meant.

       To do what you meant properly, you must write:

           print(($foo & 255) + 1, "\n");

       See "Named Unary Operators" for more discussion of this.

       Also parsed as terms are the "do {}" and "eval {}" constructs, as well as subroutine and
       method calls, and the anonymous constructors "[]" and "{}".

       See also "Quote and Quote-like Operators" toward the end of this section, as well as "I/O
       Operators".

   The Arrow Operator
       ""->"" is an infix dereference operator, just as it is in C and C++.  If the right side is
       either a "[...]", "{...}", or a "(...)" subscript, then the left side must be either a
       hard or symbolic reference to an array, a hash, or a subroutine respectively.  (Or
       technically speaking, a location capable of holding a hard reference, if it's an array or
       hash reference being used for assignment.)  See perlreftut and perlref.

       Otherwise, the right side is a method name or a simple scalar variable containing either
       the method name or a subroutine reference, and (if it is a method name) the left side must
       be either an object (a blessed reference) or a class name (that is, a package name).  See
       perlobj.

       The dereferencing cases (as opposed to method-calling cases) are somewhat extended by the
       "postderef" feature.  For the details of that feature, consult "Postfix Dereference
       Syntax" in perlref.

   Auto-increment and Auto-decrement
       "++" and "--" work as in C.  That is, if placed before a variable, they increment or
       decrement the variable by one before returning the value, and if placed after, increment
       or decrement after returning the value.

           $i = 0;  $j = 0;
           print $i++;  # prints 0
           print ++$j;  # prints 1

       Note that just as in C, Perl doesn't define when the variable is incremented or
       decremented.  You just know it will be done sometime before or after the value is
       returned.  This also means that modifying a variable twice in the same statement will lead
       to undefined behavior.  Avoid statements like:

           $i = $i ++;
           print ++ $i + $i ++;

       Perl will not guarantee what the result of the above statements is.

       The auto-increment operator has a little extra builtin magic to it.  If you increment a
       variable that is numeric, or that has ever been used in a numeric context, you get a
       normal increment.  If, however, the variable has been used in only string contexts since
       it was set, and has a value that is not the empty string and matches the pattern
       "/^[a-zA-Z]*[0-9]*\z/", the increment is done as a string, preserving each character
       within its range, with carry:

           print ++($foo = "99");      # prints "100"
           print ++($foo = "a0");      # prints "a1"
           print ++($foo = "Az");      # prints "Ba"
           print ++($foo = "zz");      # prints "aaa"

       "undef" is always treated as numeric, and in particular is changed to 0 before
       incrementing (so that a post-increment of an undef value will return 0 rather than
       "undef").

       The auto-decrement operator is not magical.

   Exponentiation
       Binary "**" is the exponentiation operator.  It binds even more tightly than unary minus,
       so "-2**4" is "-(2**4)", not "(-2)**4".  (This is implemented using C's pow(3) function,
       which actually works on doubles internally.)

       Note that certain exponentiation expressions are ill-defined: these include "0**0",
       "1**Inf", and "Inf**0".  Do not expect any particular results from these special cases,
       the results are platform-dependent.

   Symbolic Unary Operators
       Unary "!" performs logical negation, that is, "not".  See also "not" for a lower
       precedence version of this.

       Unary "-" performs arithmetic negation if the operand is numeric, including any string
       that looks like a number.  If the operand is an identifier, a string consisting of a minus
       sign concatenated with the identifier is returned.  Otherwise, if the string starts with a
       plus or minus, a string starting with the opposite sign is returned.  One effect of these
       rules is that "-bareword" is equivalent to the string "-bareword".  If, however, the
       string begins with a non-alphabetic character (excluding "+" or "-"), Perl will attempt to
       convert the string to a numeric, and the arithmetic negation is performed.  If the string
       cannot be cleanly converted to a numeric, Perl will give the warning Argument "the string"
       isn't numeric in negation (-) at ....

       Unary "~" performs bitwise negation, that is, 1's complement.  For example, "0666 & ~027"
       is 0640.  (See also "Integer Arithmetic" and "Bitwise String Operators".)  Note that the
       width of the result is platform-dependent: "~0" is 32 bits wide on a 32-bit platform, but
       64 bits wide on a 64-bit platform, so if you are expecting a certain bit width, remember
       to use the "&" operator to mask off the excess bits.

       Starting in Perl 5.28, it is a fatal error to try to complement a string containing a
       character with an ordinal value above 255.

       If the "bitwise" feature is enabled via "use feature 'bitwise'" or "use v5.28", then unary
       "~" always treats its argument as a number, and an alternate form of the operator, "~.",
       always treats its argument as a string.  So "~0" and "~"0"" will both give 2**32-1 on
       32-bit platforms, whereas "~.0" and "~."0"" will both yield "\xff".  Until Perl 5.28, this
       feature produced a warning in the "experimental::bitwise" category.

       Unary "+" has no effect whatsoever, even on strings.  It is useful syntactically for
       separating a function name from a parenthesized expression that would otherwise be
       interpreted as the complete list of function arguments.  (See examples above under "Terms
       and List Operators (Leftward)".)

       Unary "\" creates references.  If its operand is a single sigilled thing, it creates a
       reference to that object.  If its operand is a parenthesised list, then it creates
       references to the things mentioned in the list.  Otherwise it puts its operand in list
       context, and creates a list of references to the scalars in the list provided by the
       operand.  See perlreftut and perlref.  Do not confuse this behavior with the behavior of
       backslash within a string, although both forms do convey the notion of protecting the next
       thing from interpolation.

   Binding Operators
       Binary "=~" binds a scalar expression to a pattern match.  Certain operations search or
       modify the string $_ by default.  This operator makes that kind of operation work on some
       other string.  The right argument is a search pattern, substitution, or transliteration.
       The left argument is what is supposed to be searched, substituted, or transliterated
       instead of the default $_.  When used in scalar context, the return value generally
       indicates the success of the operation.  The exceptions are substitution ("s///") and
       transliteration ("y///") with the "/r" (non-destructive) option, which cause the return
       value to be the result of the substitution.  Behavior in list context depends on the
       particular operator.  See "Regexp Quote-Like Operators" for details and perlretut for
       examples using these operators.

       If the right argument is an expression rather than a search pattern, substitution, or
       transliteration, it is interpreted as a search pattern at run time.  Note that this means
       that its contents will be interpolated twice, so

           '\\' =~ q'\\';

       is not ok, as the regex engine will end up trying to compile the pattern "\", which it
       will consider a syntax error.

       Binary "!~" is just like "=~" except the return value is negated in the logical sense.

       Binary "!~" with a non-destructive substitution ("s///r") or transliteration ("y///r") is
       a syntax error.

   Multiplicative Operators
       Binary "*" multiplies two numbers.

       Binary "/" divides two numbers.

       Binary "%" is the modulo operator, which computes the division remainder of its first
       argument with respect to its second argument.  Given integer operands $m and $n: If $n is
       positive, then "$m % $n" is $m minus the largest multiple of $n less than or equal to $m.
       If $n is negative, then "$m % $n" is $m minus the smallest multiple of $n that is not less
       than $m (that is, the result will be less than or equal to zero).  If the operands $m and
       $n are floating point values and the absolute value of $n (that is "abs($n)") is less than
       "(UV_MAX + 1)", only the integer portion of $m and $n will be used in the operation (Note:
       here "UV_MAX" means the maximum of the unsigned integer type).  If the absolute value of
       the right operand ("abs($n)") is greater than or equal to "(UV_MAX + 1)", "%" computes the
       floating-point remainder $r in the equation "($r = $m - $i*$n)" where $i is a certain
       integer that makes $r have the same sign as the right operand $n (not as the left operand
       $m like C function "fmod()") and the absolute value less than that of $n.  Note that when
       "use integer" is in scope, "%" gives you direct access to the modulo operator as
       implemented by your C compiler.  This operator is not as well defined for negative
       operands, but it will execute faster.

       Binary "x" is the repetition operator.  In scalar context, or if the left operand is
       neither enclosed in parentheses nor a "qw//" list, it performs a string repetition.  In
       that case it supplies scalar context to the left operand, and returns a string consisting
       of the left operand string repeated the number of times specified by the right operand.
       If the "x" is in list context, and the left operand is either enclosed in parentheses or a
       "qw//" list, it performs a list repetition.  In that case it supplies list context to the
       left operand, and returns a list consisting of the left operand list repeated the number
       of times specified by the right operand.  If the right operand is zero or negative
       (raising a warning on negative), it returns an empty string or an empty list, depending on
       the context.

           print '-' x 80;             # print row of dashes

           print "\t" x ($tab/8), ' ' x ($tab%8);      # tab over

           @ones = (1) x 80;           # a list of 80 1's
           @ones = (5) x @ones;        # set all elements to 5

   Additive Operators
       Binary "+" returns the sum of two numbers.

       Binary "-" returns the difference of two numbers.

       Binary "." concatenates two strings.

   Shift Operators
       Binary "<<" returns the value of its left argument shifted left by the number of bits
       specified by the right argument.  Arguments should be integers.  (See also "Integer
       Arithmetic".)

       Binary ">>" returns the value of its left argument shifted right by the number of bits
       specified by the right argument.  Arguments should be integers.  (See also "Integer
       Arithmetic".)

       If "use integer" (see "Integer Arithmetic") is in force then signed C integers are used
       (arithmetic shift), otherwise unsigned C integers are used (logical shift), even for
       negative shiftees.  In arithmetic right shift the sign bit is replicated on the left, in
       logical shift zero bits come in from the left.

       Either way, the implementation isn't going to generate results larger than the size of the
       integer type Perl was built with (32 bits or 64 bits).

       Shifting by negative number of bits means the reverse shift: left shift becomes right
       shift, right shift becomes left shift.  This is unlike in C, where negative shift is
       undefined.

       Shifting by more bits than the size of the integers means most of the time zero (all bits
       fall off), except that under "use integer" right overshifting a negative shiftee results
       in -1.  This is unlike in C, where shifting by too many bits is undefined.  A common C
       behavior is "shift by modulo wordbits", so that for example

           1 >> 64 == 1 >> (64 % 64) == 1 >> 0 == 1  # Common C behavior.

       but that is completely accidental.

       If you get tired of being subject to your platform's native integers, the "use bigint"
       pragma neatly sidesteps the issue altogether:

           print 20 << 20;  # 20971520
           print 20 << 40;  # 5120 on 32-bit machines,
                            # 21990232555520 on 64-bit machines
           use bigint;
           print 20 << 100; # 25353012004564588029934064107520

   Named Unary Operators
       The various named unary operators are treated as functions with one argument, with
       optional parentheses.

       If any list operator ("print()", etc.) or any unary operator ("chdir()", etc.)  is
       followed by a left parenthesis as the next token, the operator and arguments within
       parentheses are taken to be of highest precedence, just like a normal function call.  For
       example, because named unary operators are higher precedence than "||":

           chdir $foo    || die;       # (chdir $foo) || die
           chdir($foo)   || die;       # (chdir $foo) || die
           chdir ($foo)  || die;       # (chdir $foo) || die
           chdir +($foo) || die;       # (chdir $foo) || die

       but, because "*" is higher precedence than named operators:

           chdir $foo * 20;    # chdir ($foo * 20)
           chdir($foo) * 20;   # (chdir $foo) * 20
           chdir ($foo) * 20;  # (chdir $foo) * 20
           chdir +($foo) * 20; # chdir ($foo * 20)

           rand 10 * 20;       # rand (10 * 20)
           rand(10) * 20;      # (rand 10) * 20
           rand (10) * 20;     # (rand 10) * 20
           rand +(10) * 20;    # rand (10 * 20)

       Regarding precedence, the filetest operators, like "-f", "-M", etc. are treated like named
       unary operators, but they don't follow this functional parenthesis rule.  That means, for
       example, that "-f($file).".bak"" is equivalent to "-f "$file.bak"".

       See also "Terms and List Operators (Leftward)".

   Relational Operators
       Perl operators that return true or false generally return values that can be safely used
       as numbers.  For example, the relational operators in this section and the equality
       operators in the next one return 1 for true and a special version of the defined empty
       string, "", which counts as a zero but is exempt from warnings about improper numeric
       conversions, just as "0 but true" is.

       Binary "<" returns true if the left argument is numerically less than the right argument.

       Binary ">" returns true if the left argument is numerically greater than the right
       argument.

       Binary "<=" returns true if the left argument is numerically less than or equal to the
       right argument.

       Binary ">=" returns true if the left argument is numerically greater than or equal to the
       right argument.

       Binary "lt" returns true if the left argument is stringwise less than the right argument.

       Binary "gt" returns true if the left argument is stringwise greater than the right
       argument.

       Binary "le" returns true if the left argument is stringwise less than or equal to the
       right argument.

       Binary "ge" returns true if the left argument is stringwise greater than or equal to the
       right argument.

       A sequence of relational operators, such as "$x < $y <= $z", performs chained comparisons,
       in the manner described above in the section "Operator Precedence and Associativity".
       Beware that they do not chain with equality operators, which have lower precedence.

   Equality Operators
       Binary "==" returns true if the left argument is numerically equal to the right argument.

       Binary "!=" returns true if the left argument is numerically not equal to the right
       argument.

       Binary "eq" returns true if the left argument is stringwise equal to the right argument.

       Binary "ne" returns true if the left argument is stringwise not equal to the right
       argument.

       A sequence of the above equality operators, such as "$x == $y == $z", performs chained
       comparisons, in the manner described above in the section "Operator Precedence and
       Associativity".  Beware that they do not chain with relational operators, which have
       higher precedence.

       Binary "<=>" returns -1, 0, or 1 depending on whether the left argument is numerically
       less than, equal to, or greater than the right argument.  If your platform supports
       "NaN"'s (not-a-numbers) as numeric values, using them with "<=>" returns undef.  "NaN" is
       not "<", "==", ">", "<=" or ">=" anything (even "NaN"), so those 5 return false.
       "NaN != NaN" returns true, as does "NaN !=" anything else.  If your platform doesn't
       support "NaN"'s then "NaN" is just a string with numeric value 0.

           $ perl -le '$x = "NaN"; print "No NaN support here" if $x == $x'
           $ perl -le '$x = "NaN"; print "NaN support here" if $x != $x'

       (Note that the bigint, bigrat, and bignum pragmas all support "NaN".)

       Binary "cmp" returns -1, 0, or 1 depending on whether the left argument is stringwise less
       than, equal to, or greater than the right argument.

       Here we can see the difference between <=> and cmp,

           print 10 <=> 2 #prints 1
           print 10 cmp 2 #prints -1

       (likewise between gt and >, lt and <, etc.)

       Binary "~~" does a smartmatch between its arguments.  Smart matching is described in the
       next section.

       The two-sided ordering operators "<=>" and "cmp", and the smartmatch operator "~~", are
       non-associative with respect to each other and with respect to the equality operators of
       the same precedence.

       "lt", "le", "ge", "gt" and "cmp" use the collation (sort) order specified by the current
       "LC_COLLATE" locale if a "use locale" form that includes collation is in effect.  See
       perllocale.  Do not mix these with Unicode, only use them with legacy 8-bit locale
       encodings.  The standard "Unicode::Collate" and "Unicode::Collate::Locale" modules offer
       much more powerful solutions to collation issues.

       For case-insensitive comparisons, look at the "fc" in perlfunc case-folding function,
       available in Perl v5.16 or later:

           if ( fc($x) eq fc($y) ) { ... }

   Class Instance Operator
       Binary "isa" evaluates to true when the left argument is an object instance of the class
       (or a subclass derived from that class) given by the right argument.  If the left argument
       is not defined, not a blessed object instance, nor does not derive from the class given by
       the right argument, the operator evaluates as false. The right argument may give the class
       either as a bareword or a scalar expression that yields a string class name:

           if( $obj isa Some::Class ) { ... }

           if( $obj isa "Different::Class" ) { ... }
           if( $obj isa $name_of_class ) { ... }

       This feature is available from Perl 5.31.6 onwards when enabled by "use feature 'isa'".
       This feature is enabled automatically by a "use v5.36" (or higher) declaration in the
       current scope.

   Smartmatch Operator
       First available in Perl 5.10.1 (the 5.10.0 version behaved differently), binary "~~" does
       a "smartmatch" between its arguments.  This is mostly used implicitly in the "when"
       construct described in perlsyn, although not all "when" clauses call the smartmatch
       operator.  Unique among all of Perl's operators, the smartmatch operator can recurse.  The
       smartmatch operator is experimental and its behavior is subject to change.

       It is also unique in that all other Perl operators impose a context (usually string or
       numeric context) on their operands, autoconverting those operands to those imposed
       contexts.  In contrast, smartmatch infers contexts from the actual types of its operands
       and uses that type information to select a suitable comparison mechanism.

       The "~~" operator compares its operands "polymorphically", determining how to compare them
       according to their actual types (numeric, string, array, hash, etc.).  Like the equality
       operators with which it shares the same precedence, "~~" returns 1 for true and "" for
       false.  It is often best read aloud as "in", "inside of", or "is contained in", because
       the left operand is often looked for inside the right operand.  That makes the order of
       the operands to the smartmatch operand often opposite that of the regular match operator.
       In other words, the "smaller" thing is usually placed in the left operand and the larger
       one in the right.

       The behavior of a smartmatch depends on what type of things its arguments are, as
       determined by the following table.  The first row of the table whose types apply
       determines the smartmatch behavior.  Because what actually happens is mostly determined by
       the type of the second operand, the table is sorted on the right operand instead of on the
       left.

        Left      Right      Description and pseudocode
        ===============================================================
        Any       undef      check whether Any is undefined
                       like: !defined Any

        Any       Object     invoke ~~ overloading on Object, or die

        Right operand is an ARRAY:

        Left      Right      Description and pseudocode
        ===============================================================
        ARRAY1    ARRAY2     recurse on paired elements of ARRAY1 and ARRAY2[2]
                       like: (ARRAY1[0] ~~ ARRAY2[0])
                               && (ARRAY1[1] ~~ ARRAY2[1]) && ...
        HASH      ARRAY      any ARRAY elements exist as HASH keys
                       like: grep { exists HASH->{$_} } ARRAY
        Regexp    ARRAY      any ARRAY elements pattern match Regexp
                       like: grep { /Regexp/ } ARRAY
        undef     ARRAY      undef in ARRAY
                       like: grep { !defined } ARRAY
        Any       ARRAY      smartmatch each ARRAY element[3]
                       like: grep { Any ~~ $_ } ARRAY

        Right operand is a HASH:

        Left      Right      Description and pseudocode
        ===============================================================
        HASH1     HASH2      all same keys in both HASHes
                       like: keys HASH1 ==
                                grep { exists HASH2->{$_} } keys HASH1
        ARRAY     HASH       any ARRAY elements exist as HASH keys
                       like: grep { exists HASH->{$_} } ARRAY
        Regexp    HASH       any HASH keys pattern match Regexp
                       like: grep { /Regexp/ } keys HASH
        undef     HASH       always false (undef cannot be a key)
                       like: 0 == 1
        Any       HASH       HASH key existence
                       like: exists HASH->{Any}

        Right operand is CODE:

        Left      Right      Description and pseudocode
        ===============================================================
        ARRAY     CODE       sub returns true on all ARRAY elements[1]
                       like: !grep { !CODE->($_) } ARRAY
        HASH      CODE       sub returns true on all HASH keys[1]
                       like: !grep { !CODE->($_) } keys HASH
        Any       CODE       sub passed Any returns true
                       like: CODE->(Any)

        Right operand is a Regexp:

        Left      Right      Description and pseudocode
        ===============================================================
        ARRAY     Regexp     any ARRAY elements match Regexp
                       like: grep { /Regexp/ } ARRAY
        HASH      Regexp     any HASH keys match Regexp
                       like: grep { /Regexp/ } keys HASH
        Any       Regexp     pattern match
                       like: Any =~ /Regexp/

        Other:

        Left      Right      Description and pseudocode
        ===============================================================
        Object    Any        invoke ~~ overloading on Object,
                             or fall back to...

        Any       Num        numeric equality
                        like: Any == Num
        Num       nummy[4]    numeric equality
                        like: Num == nummy
        undef     Any        check whether undefined
                        like: !defined(Any)
        Any       Any        string equality
                        like: Any eq Any

       Notes:

       1. Empty hashes or arrays match.
       2. That is, each element smartmatches the element of the same index in the other array.[3]
       3. If a circular reference is found, fall back to referential equality.
       4. Either an actual number, or a string that looks like one.

       The smartmatch implicitly dereferences any non-blessed hash or array reference, so the
       "HASH" and "ARRAY" entries apply in those cases.  For blessed references, the "Object"
       entries apply.  Smartmatches involving hashes only consider hash keys, never hash values.

       The "like" code entry is not always an exact rendition.  For example, the smartmatch
       operator short-circuits whenever possible, but "grep" does not.  Also, "grep" in scalar
       context returns the number of matches, but "~~" returns only true or false.

       Unlike most operators, the smartmatch operator knows to treat "undef" specially:

           use v5.10.1;
           @array = (1, 2, 3, undef, 4, 5);
           say "some elements undefined" if undef ~~ @array;

       Each operand is considered in a modified scalar context, the modification being that array
       and hash variables are passed by reference to the operator, which implicitly dereferences
       them.  Both elements of each pair are the same:

           use v5.10.1;

           my %hash = (red    => 1, blue   => 2, green  => 3,
                       orange => 4, yellow => 5, purple => 6,
                       black  => 7, grey   => 8, white  => 9);

           my @array = qw(red blue green);

           say "some array elements in hash keys" if  @array ~~  %hash;
           say "some array elements in hash keys" if \@array ~~ \%hash;

           say "red in array" if "red" ~~  @array;
           say "red in array" if "red" ~~ \@array;

           say "some keys end in e" if /e$/ ~~  %hash;
           say "some keys end in e" if /e$/ ~~ \%hash;

       Two arrays smartmatch if each element in the first array smartmatches (that is, is "in")
       the corresponding element in the second array, recursively.

           use v5.10.1;
           my @little = qw(red blue green);
           my @bigger = ("red", "blue", [ "orange", "green" ] );
           if (@little ~~ @bigger) {  # true!
               say "little is contained in bigger";
           }

       Because the smartmatch operator recurses on nested arrays, this will still report that
       "red" is in the array.

           use v5.10.1;
           my @array = qw(red blue green);
           my $nested_array = [[[[[[[ @array ]]]]]]];
           say "red in array" if "red" ~~ $nested_array;

       If two arrays smartmatch each other, then they are deep copies of each others' values, as
       this example reports:

           use v5.12.0;
           my @a = (0, 1, 2, [3, [4, 5], 6], 7);
           my @b = (0, 1, 2, [3, [4, 5], 6], 7);

           if (@a ~~ @b && @b ~~ @a) {
               say "a and b are deep copies of each other";
           }
           elsif (@a ~~ @b) {
               say "a smartmatches in b";
           }
           elsif (@b ~~ @a) {
               say "b smartmatches in a";
           }
           else {
               say "a and b don't smartmatch each other at all";
           }

       If you were to set "$b[3] = 4", then instead of reporting that "a and b are deep copies of
       each other", it now reports that "b smartmatches in a".  That's because the corresponding
       position in @a contains an array that (eventually) has a 4 in it.

       Smartmatching one hash against another reports whether both contain the same keys, no more
       and no less.  This could be used to see whether two records have the same field names,
       without caring what values those fields might have.  For example:

           use v5.10.1;
           sub make_dogtag {
               state $REQUIRED_FIELDS = { name=>1, rank=>1, serial_num=>1 };

               my ($class, $init_fields) = @_;

               die "Must supply (only) name, rank, and serial number"
                   unless $init_fields ~~ $REQUIRED_FIELDS;

               ...
           }

       However, this only does what you mean if $init_fields is indeed a hash reference. The
       condition "$init_fields ~~ $REQUIRED_FIELDS" also allows the strings "name", "rank",
       "serial_num" as well as any array reference that contains "name" or "rank" or "serial_num"
       anywhere to pass through.

       The smartmatch operator is most often used as the implicit operator of a "when" clause.
       See the section on "Switch Statements" in perlsyn.

       Smartmatching of Objects

       To avoid relying on an object's underlying representation, if the smartmatch's right
       operand is an object that doesn't overload "~~", it raises the exception ""Smartmatching a
       non-overloaded object breaks encapsulation"".  That's because one has no business digging
       around to see whether something is "in" an object.  These are all illegal on objects
       without a "~~" overload:

           %hash ~~ $object
              42 ~~ $object
          "fred" ~~ $object

       However, you can change the way an object is smartmatched by overloading the "~~"
       operator.  This is allowed to extend the usual smartmatch semantics.  For objects that do
       have an "~~" overload, see overload.

       Using an object as the left operand is allowed, although not very useful.  Smartmatching
       rules take precedence over overloading, so even if the object in the left operand has
       smartmatch overloading, this will be ignored.  A left operand that is a non-overloaded
       object falls back on a string or numeric comparison of whatever the "ref" operator
       returns.  That means that

           $object ~~ X

       does not invoke the overload method with "X" as an argument.  Instead the above table is
       consulted as normal, and based on the type of "X", overloading may or may not be invoked.
       For simple strings or numbers, "in" becomes equivalent to this:

           $object ~~ $number          ref($object) == $number
           $object ~~ $string          ref($object) eq $string

       For example, this reports that the handle smells IOish (but please don't really do this!):

           use IO::Handle;
           my $fh = IO::Handle->new();
           if ($fh ~~ /\bIO\b/) {
               say "handle smells IOish";
           }

       That's because it treats $fh as a string like "IO::Handle=GLOB(0x8039e0)", then pattern
       matches against that.

   Bitwise And
       Binary "&" returns its operands ANDed together bit by bit.  Although no warning is
       currently raised, the result is not well defined when this operation is performed on
       operands that aren't either numbers (see "Integer Arithmetic") nor bitstrings (see
       "Bitwise String Operators").

       Note that "&" has lower priority than relational operators, so for example the parentheses
       are essential in a test like

           print "Even\n" if ($x & 1) == 0;

       If the "bitwise" feature is enabled via "use feature 'bitwise'" or "use v5.28", then this
       operator always treats its operands as numbers.  Before Perl 5.28 this feature produced a
       warning in the "experimental::bitwise" category.

   Bitwise Or and Exclusive Or
       Binary "|" returns its operands ORed together bit by bit.

       Binary "^" returns its operands XORed together bit by bit.

       Although no warning is currently raised, the results are not well defined when these
       operations are performed on operands that aren't either numbers (see "Integer Arithmetic")
       nor bitstrings (see "Bitwise String Operators").

       Note that "|" and "^" have lower priority than relational operators, so for example the
       parentheses are essential in a test like

           print "false\n" if (8 | 2) != 10;

       If the "bitwise" feature is enabled via "use feature 'bitwise'" or "use v5.28", then this
       operator always treats its operands as numbers.  Before Perl 5.28. this feature produced a
       warning in the "experimental::bitwise" category.

   C-style Logical And
       Binary "&&" performs a short-circuit logical AND operation.  That is, if the left operand
       is false, the right operand is not even evaluated.  Scalar or list context propagates down
       to the right operand if it is evaluated.

   C-style Logical Or
       Binary "||" performs a short-circuit logical OR operation.  That is, if the left operand
       is true, the right operand is not even evaluated.  Scalar or list context propagates down
       to the right operand if it is evaluated.

   Logical Defined-Or
       Although it has no direct equivalent in C, Perl's "//" operator is related to its C-style
       "or".  In fact, it's exactly the same as "||", except that it tests the left hand side's
       definedness instead of its truth.  Thus, "EXPR1 // EXPR2" returns the value of "EXPR1" if
       it's defined, otherwise, the value of "EXPR2" is returned.  ("EXPR1" is evaluated in
       scalar context, "EXPR2" in the context of "//" itself).  Usually, this is the same result
       as "defined(EXPR1) ? EXPR1 : EXPR2" (except that the ternary-operator form can be used as
       a lvalue, while "EXPR1 // EXPR2" cannot).  This is very useful for providing default
       values for variables.  If you actually want to test if at least one of $x and $y is
       defined, use "defined($x // $y)".

       The "||", "//" and "&&" operators return the last value evaluated (unlike C's "||" and
       "&&", which return 0 or 1).  Thus, a reasonably portable way to find out the home
       directory might be:

           $home =  $ENV{HOME}
                 // $ENV{LOGDIR}
                 // (getpwuid($<))[7]
                 // die "You're homeless!\n";

       In particular, this means that you shouldn't use this for selecting between two aggregates
       for assignment:

           @a = @b || @c;            # This doesn't do the right thing
           @a = scalar(@b) || @c;    # because it really means this.
           @a = @b ? @b : @c;        # This works fine, though.

       As alternatives to "&&" and "||" when used for control flow, Perl provides the "and" and
       "or" operators (see below).  The short-circuit behavior is identical.  The precedence of
       "and" and "or" is much lower, however, so that you can safely use them after a list
       operator without the need for parentheses:

           unlink "alpha", "beta", "gamma"
                   or gripe(), next LINE;

       With the C-style operators that would have been written like this:

           unlink("alpha", "beta", "gamma")
                   || (gripe(), next LINE);

       It would be even more readable to write that this way:

           unless(unlink("alpha", "beta", "gamma")) {
               gripe();
               next LINE;
           }

       Using "or" for assignment is unlikely to do what you want; see below.

   Range Operators
       Binary ".." is the range operator, which is really two different operators depending on
       the context.  In list context, it returns a list of values counting (up by ones) from the
       left value to the right value.  If the left value is greater than the right value then it
       returns the empty list.  The range operator is useful for writing "foreach (1..10)" loops
       and for doing slice operations on arrays.  In the current implementation, no temporary
       array is created when the range operator is used as the expression in "foreach" loops, but
       older versions of Perl might burn a lot of memory when you write something like this:

           for (1 .. 1_000_000) {
               # code
           }

       The range operator also works on strings, using the magical auto-increment, see below.

       In scalar context, ".." returns a boolean value.  The operator is bistable, like a flip-
       flop, and emulates the line-range (comma) operator of sed, awk, and various editors.  Each
       ".." operator maintains its own boolean state, even across calls to a subroutine that
       contains it.  It is false as long as its left operand is false.  Once the left operand is
       true, the range operator stays true until the right operand is true, AFTER which the range
       operator becomes false again.  It doesn't become false till the next time the range
       operator is evaluated.  It can test the right operand and become false on the same
       evaluation it became true (as in awk), but it still returns true once.  If you don't want
       it to test the right operand until the next evaluation, as in sed, just use three dots
       ("...") instead of two.  In all other regards, "..." behaves just like ".." does.

       The right operand is not evaluated while the operator is in the "false" state, and the
       left operand is not evaluated while the operator is in the "true" state.  The precedence
       is a little lower than || and &&.  The value returned is either the empty string for
       false, or a sequence number (beginning with 1) for true.  The sequence number is reset for
       each range encountered.  The final sequence number in a range has the string "E0" appended
       to it, which doesn't affect its numeric value, but gives you something to search for if
       you want to exclude the endpoint.  You can exclude the beginning point by waiting for the
       sequence number to be greater than 1.

       If either operand of scalar ".." is a constant expression, that operand is considered true
       if it is equal ("==") to the current input line number (the $. variable).

       To be pedantic, the comparison is actually "int(EXPR) == int(EXPR)", but that is only an
       issue if you use a floating point expression; when implicitly using $. as described in the
       previous paragraph, the comparison is "int(EXPR) == int($.)" which is only an issue when
       $.  is set to a floating point value and you are not reading from a file.  Furthermore,
       "span" .. "spat" or "2.18 .. 3.14" will not do what you want in scalar context because
       each of the operands are evaluated using their integer representation.

       Examples:

       As a scalar operator:

           if (101 .. 200) { print; } # print 2nd hundred lines, short for
                                      #  if ($. == 101 .. $. == 200) { print; }

           next LINE if (1 .. /^$/);  # skip header lines, short for
                                      #   next LINE if ($. == 1 .. /^$/);
                                      # (typically in a loop labeled LINE)

           s/^/> / if (/^$/ .. eof());  # quote body

           # parse mail messages
           while (<>) {
               $in_header =   1  .. /^$/;
               $in_body   = /^$/ .. eof;
               if ($in_header) {
                   # do something
               } else { # in body
                   # do something else
               }
           } continue {
               close ARGV if eof;             # reset $. each file
           }

       Here's a simple example to illustrate the difference between the two range operators:

           @lines = ("   - Foo",
                     "01 - Bar",
                     "1  - Baz",
                     "   - Quux");

           foreach (@lines) {
               if (/0/ .. /1/) {
                   print "$_\n";
               }
           }

       This program will print only the line containing "Bar".  If the range operator is changed
       to "...", it will also print the "Baz" line.

       And now some examples as a list operator:

           for (101 .. 200) { print }      # print $_ 100 times
           @foo = @foo[0 .. $#foo];        # an expensive no-op
           @foo = @foo[$#foo-4 .. $#foo];  # slice last 5 items

       Because each operand is evaluated in integer form, "2.18 .. 3.14" will return two elements
       in list context.

           @list = (2.18 .. 3.14); # same as @list = (2 .. 3);

       The range operator in list context can make use of the magical auto-increment algorithm if
       both operands are strings, subject to the following rules:

       •   With one exception (below), if both strings look like numbers to Perl, the magic
           increment will not be applied, and the strings will be treated as numbers (more
           specifically, integers) instead.

           For example, "-2".."2" is the same as "-2..2", and "2.18".."3.14" produces "2, 3".

       •   The exception to the above rule is when the left-hand string begins with 0 and is
           longer than one character, in this case the magic increment will be applied, even
           though strings like "01" would normally look like a number to Perl.

           For example, "01".."04" produces "01", "02", "03", "04", and "00".."-1" produces "00"
           through "99" - this may seem surprising, but see the following rules for why it works
           this way.  To get dates with leading zeros, you can say:

               @z2 = ("01" .. "31");
               print $z2[$mday];

           If you want to force strings to be interpreted as numbers, you could say

               @numbers = ( 0+$first .. 0+$last );

           Note: In Perl versions 5.30 and below, any string on the left-hand side beginning with
           "0", including the string "0" itself, would cause the magic string increment behavior.
           This means that on these Perl versions, "0".."-1" would produce "0" through "99",
           which was inconsistent with "0..-1", which produces the empty list. This also means
           that "0".."9" now produces a list of integers instead of a list of strings.

       •   If the initial value specified isn't part of a magical increment sequence (that is, a
           non-empty string matching "/^[a-zA-Z]*[0-9]*\z/"), only the initial value will be
           returned.

           For example, "ax".."az" produces "ax", "ay", "az", but "*x".."az" produces only "*x".

       •   For other initial values that are strings that do follow the rules of the magical
           increment, the corresponding sequence will be returned.

           For example, you can say

               @alphabet = ("A" .. "Z");

           to get all normal letters of the English alphabet, or

               $hexdigit = (0 .. 9, "a" .. "f")[$num & 15];

           to get a hexadecimal digit.

       •   If the final value specified is not in the sequence that the magical increment would
           produce, the sequence goes until the next value would be longer than the final value
           specified. If the length of the final string is shorter than the first, the empty list
           is returned.

           For example, "a".."--" is the same as "a".."zz", "0".."xx" produces "0" through "99",
           and "aaa".."--" returns the empty list.

       As of Perl 5.26, the list-context range operator on strings works as expected in the scope
       of "use feature 'unicode_strings". In previous versions, and outside the scope of that
       feature, it exhibits "The "Unicode Bug"" in perlunicode: its behavior depends on the
       internal encoding of the range endpoint.

       Because the magical increment only works on non-empty strings matching
       "/^[a-zA-Z]*[0-9]*\z/", the following will only return an alpha:

           use charnames "greek";
           my @greek_small =  ("\N{alpha}" .. "\N{omega}");

       To get the 25 traditional lowercase Greek letters, including both sigmas, you could use
       this instead:

           use charnames "greek";
           my @greek_small =  map { chr } ( ord("\N{alpha}")
                                               ..
                                            ord("\N{omega}")
                                          );

       However, because there are many other lowercase Greek characters than just those, to match
       lowercase Greek characters in a regular expression, you could use the pattern
       "/(?:(?=\p{Greek})\p{Lower})+/" (or the experimental feature
       "/(?[ \p{Greek} & \p{Lower} ])+/").

   Conditional Operator
       Ternary "?:" is the conditional operator, just as in C.  It works much like an if-then-
       else.  If the argument before the "?" is true, the argument before the ":" is returned,
       otherwise the argument after the ":" is returned.  For example:

           printf "I have %d dog%s.\n", $n,
                   ($n == 1) ? "" : "s";

       Scalar or list context propagates downward into the 2nd or 3rd argument, whichever is
       selected.

           $x = $ok ? $y : $z;  # get a scalar
           @x = $ok ? @y : @z;  # get an array
           $x = $ok ? @y : @z;  # oops, that's just a count!

       The operator may be assigned to if both the 2nd and 3rd arguments are legal lvalues
       (meaning that you can assign to them):

           ($x_or_y ? $x : $y) = $z;

       Because this operator produces an assignable result, using assignments without parentheses
       will get you in trouble.  For example, this:

           $x % 2 ? $x += 10 : $x += 2

       Really means this:

           (($x % 2) ? ($x += 10) : $x) += 2

       Rather than this:

           ($x % 2) ? ($x += 10) : ($x += 2)

       That should probably be written more simply as:

           $x += ($x % 2) ? 10 : 2;

   Assignment Operators
       "=" is the ordinary assignment operator.

       Assignment operators work as in C.  That is,

           $x += 2;

       is equivalent to

           $x = $x + 2;

       although without duplicating any side effects that dereferencing the lvalue might trigger,
       such as from "tie()".  Other assignment operators work similarly.  The following are
       recognized:

           **=    +=    *=    &=    &.=    <<=    &&=
                  -=    /=    |=    |.=    >>=    ||=
                  .=    %=    ^=    ^.=           //=
                        x=

       Although these are grouped by family, they all have the precedence of assignment.  These
       combined assignment operators can only operate on scalars, whereas the ordinary assignment
       operator can assign to arrays, hashes, lists and even references.  (See "Context" and
       "List value constructors" in perldata, and "Assigning to References" in perlref.)

       Unlike in C, the scalar assignment operator produces a valid lvalue.  Modifying an
       assignment is equivalent to doing the assignment and then modifying the variable that was
       assigned to.  This is useful for modifying a copy of something, like this:

           ($tmp = $global) =~ tr/13579/24680/;

       Although as of 5.14, that can be also be accomplished this way:

           use v5.14;
           $tmp = ($global =~  tr/13579/24680/r);

       Likewise,

           ($x += 2) *= 3;

       is equivalent to

           $x += 2;
           $x *= 3;

       Similarly, a list assignment in list context produces the list of lvalues assigned to, and
       a list assignment in scalar context returns the number of elements produced by the
       expression on the right hand side of the assignment.

       The three dotted bitwise assignment operators ("&.=" "|.=" "^.=") are new in Perl 5.22.
       See "Bitwise String Operators".

   Comma Operator
       Binary "," is the comma operator.  In scalar context it evaluates its left argument,
       throws that value away, then evaluates its right argument and returns that value.  This is
       just like C's comma operator.

       In list context, it's just the list argument separator, and inserts both its arguments
       into the list.  These arguments are also evaluated from left to right.

       The "=>" operator (sometimes pronounced "fat comma") is a synonym for the comma except
       that it causes a word on its left to be interpreted as a string if it begins with a letter
       or underscore and is composed only of letters, digits and underscores.  This includes
       operands that might otherwise be interpreted as operators, constants, single number
       v-strings or function calls.  If in doubt about this behavior, the left operand can be
       quoted explicitly.

       Otherwise, the "=>" operator behaves exactly as the comma operator or list argument
       separator, according to context.

       For example:

           use constant FOO => "something";

           my %h = ( FOO => 23 );

       is equivalent to:

           my %h = ("FOO", 23);

       It is NOT:

           my %h = ("something", 23);

       The "=>" operator is helpful in documenting the correspondence between keys and values in
       hashes, and other paired elements in lists.

           %hash = ( $key => $value );
           login( $username => $password );

       The special quoting behavior ignores precedence, and hence may apply to part of the left
       operand:

           print time.shift => "bbb";

       That example prints something like "1314363215shiftbbb", because the "=>" implicitly
       quotes the "shift" immediately on its left, ignoring the fact that "time.shift" is the
       entire left operand.

   List Operators (Rightward)
       On the right side of a list operator, the comma has very low precedence, such that it
       controls all comma-separated expressions found there.  The only operators with lower
       precedence are the logical operators "and", "or", and "not", which may be used to evaluate
       calls to list operators without the need for parentheses:

           open HANDLE, "< :encoding(UTF-8)", "filename"
               or die "Can't open: $!\n";

       However, some people find that code harder to read than writing it with parentheses:

           open(HANDLE, "< :encoding(UTF-8)", "filename")
               or die "Can't open: $!\n";

       in which case you might as well just use the more customary "||" operator:

           open(HANDLE, "< :encoding(UTF-8)", "filename")
               || die "Can't open: $!\n";

       See also discussion of list operators in "Terms and List Operators (Leftward)".

   Logical Not
       Unary "not" returns the logical negation of the expression to its right.  It's the
       equivalent of "!" except for the very low precedence.

   Logical And
       Binary "and" returns the logical conjunction of the two surrounding expressions.  It's
       equivalent to "&&" except for the very low precedence.  This means that it short-circuits:
       the right expression is evaluated only if the left expression is true.

   Logical or and Exclusive Or
       Binary "or" returns the logical disjunction of the two surrounding expressions.  It's
       equivalent to "||" except for the very low precedence.  This makes it useful for control
       flow:

           print FH $data              or die "Can't write to FH: $!";

       This means that it short-circuits: the right expression is evaluated only if the left
       expression is false.  Due to its precedence, you must be careful to avoid using it as
       replacement for the "||" operator.  It usually works out better for flow control than in
       assignments:

           $x = $y or $z;              # bug: this is wrong
           ($x = $y) or $z;            # really means this
           $x = $y || $z;              # better written this way

       However, when it's a list-context assignment and you're trying to use "||" for control
       flow, you probably need "or" so that the assignment takes higher precedence.

           @info = stat($file) || die;     # oops, scalar sense of stat!
           @info = stat($file) or die;     # better, now @info gets its due

       Then again, you could always use parentheses.

       Binary "xor" returns the exclusive-OR of the two surrounding expressions.  It cannot
       short-circuit (of course).

       There is no low precedence operator for defined-OR.

   C Operators Missing From Perl
       Here is what C has that Perl doesn't:

       unary & Address-of operator.  (But see the "\" operator for taking a reference.)

       unary * Dereference-address operator.  (Perl's prefix dereferencing operators are typed:
               "$", "@", "%", and "&".)

       (TYPE)  Type-casting operator.

   Quote and Quote-like Operators
       While we usually think of quotes as literal values, in Perl they function as operators,
       providing various kinds of interpolating and pattern matching capabilities.  Perl provides
       customary quote characters for these behaviors, but also provides a way for you to choose
       your quote character for any of them.  In the following table, a "{}" represents any pair
       of delimiters you choose.

           Customary  Generic        Meaning        Interpolates
               ''       q{}          Literal             no
               ""      qq{}          Literal             yes
               ``      qx{}          Command             yes*
                       qw{}         Word list            no
               //       m{}       Pattern match          yes*
                       qr{}          Pattern             yes*
                        s{}{}      Substitution          yes*
                       tr{}{}    Transliteration         no (but see below)
                        y{}{}    Transliteration         no (but see below)
               <<EOF                 here-doc            yes*

               * unless the delimiter is ''.

       Non-bracketing delimiters use the same character fore and aft, but the four sorts of ASCII
       brackets (round, angle, square, curly) all nest, which means that

           q{foo{bar}baz}

       is the same as

           'foo{bar}baz'

       Note, however, that this does not always work for quoting Perl code:

           $s = q{ if($x eq "}") ... }; # WRONG

       is a syntax error.  The "Text::Balanced" module (standard as of v5.8, and from CPAN before
       then) is able to do this properly.

       There can (and in some cases, must) be whitespace between the operator and the quoting
       characters, except when "#" is being used as the quoting character.  "q#foo#" is parsed as
       the string "foo", while "q #foo#" is the operator "q" followed by a comment.  Its argument
       will be taken from the next line.  This allows you to write:

           s {foo}  # Replace foo
             {bar}  # with bar.

       The cases where whitespace must be used are when the quoting character is a word character
       (meaning it matches "/\w/"):

           q XfooX # Works: means the string 'foo'
           qXfooX  # WRONG!

       The following escape sequences are available in constructs that interpolate, and in
       transliterations whose delimiters aren't single quotes ("'").  In all the ones with
       braces, any number of blanks and/or tabs adjoining and within the braces are allowed (and
       ignored).

           Sequence     Note  Description
           \t                  tab               (HT, TAB)
           \n                  newline           (NL)
           \r                  return            (CR)
           \f                  form feed         (FF)
           \b                  backspace         (BS)
           \a                  alarm (bell)      (BEL)
           \e                  escape            (ESC)
           \x{263A}     [1,8]  hex char          (example shown: SMILEY)
           \x{ 263A }          Same, but shows optional blanks inside and
                               adjoining the braces
           \x1b         [2,8]  restricted range hex char (example: ESC)
           \N{name}     [3]    named Unicode character or character sequence
           \N{U+263D}   [4,8]  Unicode character (example: FIRST QUARTER MOON)
           \c[          [5]    control char      (example: chr(27))
           \o{23072}    [6,8]  octal char        (example: SMILEY)
           \033         [7,8]  restricted range octal char  (example: ESC)

       Note that any escape sequence using braces inside interpolated constructs may have
       optional blanks (tab or space characters) adjoining with and inside of the braces, as
       illustrated above by the second "\x{ }" example.

       [1] The result is the character specified by the hexadecimal number between the braces.
           See "[8]" below for details on which character.

           Blanks (tab or space characters) may separate the number from either or both of the
           braces.

           Otherwise, only hexadecimal digits are valid between the braces.  If an invalid
           character is encountered, a warning will be issued and the invalid character and all
           subsequent characters (valid or invalid) within the braces will be discarded.

           If there are no valid digits between the braces, the generated character is the NULL
           character ("\x{00}").  However, an explicit empty brace ("\x{}") will not cause a
           warning (currently).

       [2] The result is the character specified by the hexadecimal number in the range 0x00 to
           0xFF.  See "[8]" below for details on which character.

           Only hexadecimal digits are valid following "\x".  When "\x" is followed by fewer than
           two valid digits, any valid digits will be zero-padded.  This means that "\x7" will be
           interpreted as "\x07", and a lone "\x" will be interpreted as "\x00".  Except at the
           end of a string, having fewer than two valid digits will result in a warning.  Note
           that although the warning says the illegal character is ignored, it is only ignored as
           part of the escape and will still be used as the subsequent character in the string.
           For example:

             Original    Result    Warns?
             "\x7"       "\x07"    no
             "\x"        "\x00"    no
             "\x7q"      "\x07q"   yes
             "\xq"       "\x00q"   yes

       [3] The result is the Unicode character or character sequence given by name.  See
           charnames.

       [4] "\N{U+hexadecimal number}" means the Unicode character whose Unicode code point is
           hexadecimal number.

       [5] The character following "\c" is mapped to some other character as shown in the table:

            Sequence   Value
              \c@      chr(0)
              \cA      chr(1)
              \ca      chr(1)
              \cB      chr(2)
              \cb      chr(2)
              ...
              \cZ      chr(26)
              \cz      chr(26)
              \c[      chr(27)
                                # See below for chr(28)
              \c]      chr(29)
              \c^      chr(30)
              \c_      chr(31)
              \c?      chr(127) # (on ASCII platforms; see below for link to
                                #  EBCDIC discussion)

           In other words, it's the character whose code point has had 64 xor'd with its
           uppercase.  "\c?" is DELETE on ASCII platforms because "ord("?") ^ 64" is 127, and
           "\c@" is NULL because the ord of "@" is 64, so xor'ing 64 itself produces 0.

           Also, "\c\X" yields " chr(28) . "X"" for any X, but cannot come at the end of a
           string, because the backslash would be parsed as escaping the end quote.

           On ASCII platforms, the resulting characters from the list above are the complete set
           of ASCII controls.  This isn't the case on EBCDIC platforms; see "OPERATOR
           DIFFERENCES" in perlebcdic for a full discussion of the differences between these for
           ASCII versus EBCDIC platforms.

           Use of any other character following the "c" besides those listed above is
           discouraged, and as of Perl v5.20, the only characters actually allowed are the
           printable ASCII ones, minus the left brace "{".  What happens for any of the allowed
           other characters is that the value is derived by xor'ing with the seventh bit, which
           is 64, and a warning raised if enabled.  Using the non-allowed characters generates a
           fatal error.

           To get platform independent controls, you can use "\N{...}".

       [6] The result is the character specified by the octal number between the braces.  See
           "[8]" below for details on which character.

           Blanks (tab or space characters) may separate the number from either or both of the
           braces.

           Otherwise, if a character that isn't an octal digit is encountered, a warning is
           raised, and the value is based on the octal digits before it, discarding it and all
           following characters up to the closing brace.  It is a fatal error if there are no
           octal digits at all.

       [7] The result is the character specified by the three-digit octal number in the range 000
           to 777 (but best to not use above 077, see next paragraph).  See "[8]" below for
           details on which character.

           Some contexts allow 2 or even 1 digit, but any usage without exactly three digits, the
           first being a zero, may give unintended results.  (For example, in a regular
           expression it may be confused with a backreference; see "Octal escapes" in
           perlrebackslash.)  Starting in Perl 5.14, you may use "\o{}" instead, which avoids all
           these problems.  Otherwise, it is best to use this construct only for ordinals "\077"
           and below, remembering to pad to the left with zeros to make three digits.  For larger
           ordinals, either use "\o{}", or convert to something else, such as to hex and use
           "\N{U+}" (which is portable between platforms with different character sets) or "\x{}"
           instead.

       [8] Several constructs above specify a character by a number.  That number gives the
           character's position in the character set encoding (indexed from 0).  This is called
           synonymously its ordinal, code position, or code point.  Perl works on platforms that
           have a native encoding currently of either ASCII/Latin1 or EBCDIC, each of which allow
           specification of 256 characters.  In general, if the number is 255 (0xFF, 0377) or
           below, Perl interprets this in the platform's native encoding.  If the number is 256
           (0x100, 0400) or above, Perl interprets it as a Unicode code point and the result is
           the corresponding Unicode character.  For example "\x{50}" and "\o{120}" both are the
           number 80 in decimal, which is less than 256, so the number is interpreted in the
           native character set encoding.  In ASCII the character in the 80th position (indexed
           from 0) is the letter "P", and in EBCDIC it is the ampersand symbol "&".  "\x{100}"
           and "\o{400}" are both 256 in decimal, so the number is interpreted as a Unicode code
           point no matter what the native encoding is.  The name of the character in the 256th
           position (indexed by 0) in Unicode is "LATIN CAPITAL LETTER A WITH MACRON".

           An exception to the above rule is that "\N{U+hex number}" is always interpreted as a
           Unicode code point, so that "\N{U+0050}" is "P" even on EBCDIC platforms.

       NOTE: Unlike C and other languages, Perl has no "\v" escape sequence for the vertical tab
       (VT, which is 11 in both ASCII and EBCDIC), but you may use "\N{VT}", "\ck", "\N{U+0b}",
       or "\x0b".  ("\v" does have meaning in regular expression patterns in Perl, see perlre.)

       The following escape sequences are available in constructs that interpolate, but not in
       transliterations.

           \l          lowercase next character only
           \u          titlecase (not uppercase!) next character only
           \L          lowercase all characters till \E or end of string
           \U          uppercase all characters till \E or end of string
           \F          foldcase all characters till \E or end of string
           \Q          quote (disable) pattern metacharacters till \E or
                       end of string
           \E          end either case modification or quoted section
                       (whichever was last seen)

       See "quotemeta" in perlfunc for the exact definition of characters that are quoted by
       "\Q".

       "\L", "\U", "\F", and "\Q" can stack, in which case you need one "\E" for each.  For
       example:

        say "This \Qquoting \ubusiness \Uhere isn't quite\E done yet,\E is it?";
        This quoting\ Business\ HERE\ ISN\'T\ QUITE\ done\ yet\, is it?

       If a "use locale" form that includes "LC_CTYPE" is in effect (see perllocale), the case
       map used by "\l", "\L", "\u", and "\U" is taken from the current locale.  If Unicode (for
       example, "\N{}" or code points of 0x100 or beyond) is being used, the case map used by
       "\l", "\L", "\u", and "\U" is as defined by Unicode.  That means that case-mapping a
       single character can sometimes produce a sequence of several characters.  Under
       "use locale", "\F" produces the same results as "\L" for all locales but a UTF-8 one,
       where it instead uses the Unicode definition.

       All systems use the virtual "\n" to represent a line terminator, called a "newline".
       There is no such thing as an unvarying, physical newline character.  It is only an
       illusion that the operating system, device drivers, C libraries, and Perl all conspire to
       preserve.  Not all systems read "\r" as ASCII CR and "\n" as ASCII LF.  For example, on
       the ancient Macs (pre-MacOS X) of yesteryear, these used to be reversed, and on systems
       without a line terminator, printing "\n" might emit no actual data.  In general, use "\n"
       when you mean a "newline" for your system, but use the literal ASCII when you need an
       exact character.  For example, most networking protocols expect and prefer a CR+LF
       ("\015\012" or "\cM\cJ") for line terminators, and although they often accept just "\012",
       they seldom tolerate just "\015".  If you get in the habit of using "\n" for networking,
       you may be burned some day.

       For constructs that do interpolate, variables beginning with ""$"" or ""@"" are
       interpolated.  Subscripted variables such as $a[3] or "$href->{key}[0]" are also
       interpolated, as are array and hash slices.  But method calls such as "$obj->meth" are
       not.

       Interpolating an array or slice interpolates the elements in order, separated by the value
       of $", so is equivalent to interpolating "join $", @array".  "Punctuation" arrays such as
       "@*" are usually interpolated only if the name is enclosed in braces "@{*}", but the
       arrays @_, "@+", and "@-" are interpolated even without braces.

       For double-quoted strings, the quoting from "\Q" is applied after interpolation and
       escapes are processed.

           "abc\Qfoo\tbar$s\Exyz"

       is equivalent to

           "abc" . quotemeta("foo\tbar$s") . "xyz"

       For the pattern of regex operators ("qr//", "m//" and "s///"), the quoting from "\Q" is
       applied after interpolation is processed, but before escapes are processed.  This allows
       the pattern to match literally (except for "$" and "@").  For example, the following
       matches:

           '\s\t' =~ /\Q\s\t/

       Because "$" or "@" trigger interpolation, you'll need to use something like
       "/\Quser\E\@\Qhost/" to match them literally.

       Patterns are subject to an additional level of interpretation as a regular expression.
       This is done as a second pass, after variables are interpolated, so that regular
       expressions may be incorporated into the pattern from the variables.  If this is not what
       you want, use "\Q" to interpolate a variable literally.

       Apart from the behavior described above, Perl does not expand multiple levels of
       interpolation.  In particular, contrary to the expectations of shell programmers, back-
       quotes do NOT interpolate within double quotes, nor do single quotes impede evaluation of
       variables when used within double quotes.

   Regexp Quote-Like Operators
       Here are the quote-like operators that apply to pattern matching and related activities.

       "qr/STRING/msixpodualn"
               This operator quotes (and possibly compiles) its STRING as a regular expression.
               STRING is interpolated the same way as PATTERN in "m/PATTERN/".  If "'" is used as
               the delimiter, no variable interpolation is done.  Returns a Perl value which may
               be used instead of the corresponding "/STRING/msixpodualn" expression.  The
               returned value is a normalized version of the original pattern.  It magically
               differs from a string containing the same characters: "ref(qr/x/)" returns
               "Regexp"; however, dereferencing it is not well defined (you currently get the
               normalized version of the original pattern, but this may change).

               For example,

                   $rex = qr/my.STRING/is;
                   print $rex;                 # prints (?si-xm:my.STRING)
                   s/$rex/foo/;

               is equivalent to

                   s/my.STRING/foo/is;

               The result may be used as a subpattern in a match:

                   $re = qr/$pattern/;
                   $string =~ /foo${re}bar/;   # can be interpolated in other
                                               # patterns
                   $string =~ $re;             # or used standalone
                   $string =~ /$re/;           # or this way

               Since Perl may compile the pattern at the moment of execution of the "qr()"
               operator, using "qr()" may have speed advantages in some situations, notably if
               the result of "qr()" is used standalone:

                   sub match {
                       my $patterns = shift;
                       my @compiled = map qr/$_/i, @$patterns;
                       grep {
                           my $success = 0;
                           foreach my $pat (@compiled) {
                               $success = 1, last if /$pat/;
                           }
                           $success;
                       } @_;
                   }

               Precompilation of the pattern into an internal representation at the moment of
               "qr()" avoids the need to recompile the pattern every time a match "/$pat/" is
               attempted.  (Perl has many other internal optimizations, but none would be
               triggered in the above example if we did not use "qr()" operator.)

               Options (specified by the following modifiers) are:

                   m   Treat string as multiple lines.
                   s   Treat string as single line. (Make . match a newline)
                   i   Do case-insensitive pattern matching.
                   x   Use extended regular expressions; specifying two
                       x's means \t and the SPACE character are ignored within
                       square-bracketed character classes
                   p   When matching preserve a copy of the matched string so
                       that ${^PREMATCH}, ${^MATCH}, ${^POSTMATCH} will be
                       defined (ignored starting in v5.20) as these are always
                       defined starting in that release
                   o   Compile pattern only once.
                   a   ASCII-restrict: Use ASCII for \d, \s, \w and [[:posix:]]
                       character classes; specifying two a's adds the further
                       restriction that no ASCII character will match a
                       non-ASCII one under /i.
                   l   Use the current run-time locale's rules.
                   u   Use Unicode rules.
                   d   Use Unicode or native charset, as in 5.12 and earlier.
                   n   Non-capture mode. Don't let () fill in $1, $2, etc...

               If a precompiled pattern is embedded in a larger pattern then the effect of
               "msixpluadn" will be propagated appropriately.  The effect that the "/o" modifier
               has is not propagated, being restricted to those patterns explicitly using it.

               The "/a", "/d", "/l", and "/u" modifiers (added in Perl 5.14) control the
               character set rules, but "/a" is the only one you are likely to want to specify
               explicitly; the other three are selected automatically by various pragmas.

               See perlre for additional information on valid syntax for STRING, and for a
               detailed look at the semantics of regular expressions.  In particular, all
               modifiers except the largely obsolete "/o" are further explained in "Modifiers" in
               perlre.  "/o" is described in the next section.

       "m/PATTERN/msixpodualngc"
       "/PATTERN/msixpodualngc"
               Searches a string for a pattern match, and in scalar context returns true if it
               succeeds, false if it fails.  If no string is specified via the "=~" or "!~"
               operator, the $_ string is searched.  (The string specified with "=~" need not be
               an lvalue--it may be the result of an expression evaluation, but remember the "=~"
               binds rather tightly.)  See also perlre.

               Options are as described in "qr//" above; in addition, the following match process
               modifiers are available:

                g  Match globally, i.e., find all occurrences.
                c  Do not reset search position on a failed match when /g is
                   in effect.

               If "/" is the delimiter then the initial "m" is optional.  With the "m" you can
               use any pair of non-whitespace (ASCII) characters as delimiters.  This is
               particularly useful for matching path names that contain "/", to avoid LTS
               (leaning toothpick syndrome).  If "?" is the delimiter, then a match-only-once
               rule applies, described in "m?PATTERN?" below.  If "'" (single quote) is the
               delimiter, no variable interpolation is performed on the PATTERN.  When using a
               delimiter character valid in an identifier, whitespace is required after the "m".

               PATTERN may contain variables, which will be interpolated every time the pattern
               search is evaluated, except for when the delimiter is a single quote.  (Note that
               $(, $), and $| are not interpolated because they look like end-of-string tests.)
               Perl will not recompile the pattern unless an interpolated variable that it
               contains changes.  You can force Perl to skip the test and never recompile by
               adding a "/o" (which stands for "once") after the trailing delimiter.  Once upon a
               time, Perl would recompile regular expressions unnecessarily, and this modifier
               was useful to tell it not to do so, in the interests of speed.  But now, the only
               reasons to use "/o" are one of:

               1.  The variables are thousands of characters long and you know that they don't
                   change, and you need to wring out the last little bit of speed by having Perl
                   skip testing for that.  (There is a maintenance penalty for doing this, as
                   mentioning "/o" constitutes a promise that you won't change the variables in
                   the pattern.  If you do change them, Perl won't even notice.)

               2.  you want the pattern to use the initial values of the variables regardless of
                   whether they change or not.  (But there are saner ways of accomplishing this
                   than using "/o".)

               3.  If the pattern contains embedded code, such as

                       use re 'eval';
                       $code = 'foo(?{ $x })';
                       /$code/

                   then perl will recompile each time, even though the pattern string hasn't
                   changed, to ensure that the current value of $x is seen each time.  Use "/o"
                   if you want to avoid this.

               The bottom line is that using "/o" is almost never a good idea.

       The empty pattern "//"
               If the PATTERN evaluates to the empty string, the last successfully matched
               regular expression is used instead.  In this case, only the "g" and "c" flags on
               the empty pattern are honored; the other flags are taken from the original
               pattern.  If no match has previously succeeded, this will (silently) act instead
               as a genuine empty pattern (which will always match).

               Note that it's possible to confuse Perl into thinking "//" (the empty regex) is
               really "//" (the defined-or operator).  Perl is usually pretty good about this,
               but some pathological cases might trigger this, such as "$x///" (is that
               "($x) / (//)" or "$x // /"?) and "print $fh //" ("print $fh(//" or
               "print($fh //"?).  In all of these examples, Perl will assume you meant defined-
               or.  If you meant the empty regex, just use parentheses or spaces to disambiguate,
               or even prefix the empty regex with an "m" (so "//" becomes "m//").

       Matching in list context
               If the "/g" option is not used, "m//" in list context returns a list consisting of
               the subexpressions matched by the parentheses in the pattern, that is, ($1, $2,
               $3...)  (Note that here $1 etc. are also set).  When there are no parentheses in
               the pattern, the return value is the list "(1)" for success.  With or without
               parentheses, an empty list is returned upon failure.

               Examples:

                open(TTY, "+</dev/tty")
                   || die "can't access /dev/tty: $!";

                <TTY> =~ /^y/i && foo();       # do foo if desired

                if (/Version: *([0-9.]*)/) { $version = $1; }

                next if m#^/usr/spool/uucp#;

                # poor man's grep
                $arg = shift;
                while (<>) {
                   print if /$arg/o; # compile only once (no longer needed!)
                }

                if (($F1, $F2, $Etc) = ($foo =~ /^(\S+)\s+(\S+)\s*(.*)/))

               This last example splits $foo into the first two words and the remainder of the
               line, and assigns those three fields to $F1, $F2, and $Etc.  The conditional is
               true if any variables were assigned; that is, if the pattern matched.

               The "/g" modifier specifies global pattern matching--that is, matching as many
               times as possible within the string.  How it behaves depends on the context.  In
               list context, it returns a list of the substrings matched by any capturing
               parentheses in the regular expression.  If there are no parentheses, it returns a
               list of all the matched strings, as if there were parentheses around the whole
               pattern.

               In scalar context, each execution of "m//g" finds the next match, returning true
               if it matches, and false if there is no further match.  The position after the
               last match can be read or set using the "pos()" function; see "pos" in perlfunc.
               A failed match normally resets the search position to the beginning of the string,
               but you can avoid that by adding the "/c" modifier (for example, "m//gc").
               Modifying the target string also resets the search position.

       "\G assertion"
               You can intermix "m//g" matches with "m/\G.../g", where "\G" is a zero-width
               assertion that matches the exact position where the previous "m//g", if any, left
               off.  Without the "/g" modifier, the "\G" assertion still anchors at "pos()" as it
               was at the start of the operation (see "pos" in perlfunc), but the match is of
               course only attempted once.  Using "\G" without "/g" on a target string that has
               not previously had a "/g" match applied to it is the same as using the "\A"
               assertion to match the beginning of the string.  Note also that, currently, "\G"
               is only properly supported when anchored at the very beginning of the pattern.

               Examples:

                   # list context
                   ($one,$five,$fifteen) = (`uptime` =~ /(\d+\.\d+)/g);

                   # scalar context
                   local $/ = "";
                   while ($paragraph = <>) {
                       while ($paragraph =~ /\p{Ll}['")]*[.!?]+['")]*\s/g) {
                           $sentences++;
                       }
                   }
                   say $sentences;

               Here's another way to check for sentences in a paragraph:

                my $sentence_rx = qr{
                   (?: (?<= ^ ) | (?<= \s ) )  # after start-of-string or
                                               # whitespace
                   \p{Lu}                      # capital letter
                   .*?                         # a bunch of anything
                   (?<= \S )                   # that ends in non-
                                               # whitespace
                   (?<! \b [DMS]r  )           # but isn't a common abbr.
                   (?<! \b Mrs )
                   (?<! \b Sra )
                   (?<! \b St  )
                   [.?!]                       # followed by a sentence
                                               # ender
                   (?= $ | \s )                # in front of end-of-string
                                               # or whitespace
                }sx;
                local $/ = "";
                while (my $paragraph = <>) {
                   say "NEW PARAGRAPH";
                   my $count = 0;
                   while ($paragraph =~ /($sentence_rx)/g) {
                       printf "\tgot sentence %d: <%s>\n", ++$count, $1;
                   }
                }

               Here's how to use "m//gc" with "\G":

                   $_ = "ppooqppqq";
                   while ($i++ < 2) {
                       print "1: '";
                       print $1 while /(o)/gc; print "', pos=", pos, "\n";
                       print "2: '";
                       print $1 if /\G(q)/gc;  print "', pos=", pos, "\n";
                       print "3: '";
                       print $1 while /(p)/gc; print "', pos=", pos, "\n";
                   }
                   print "Final: '$1', pos=",pos,"\n" if /\G(.)/;

               The last example should print:

                   1: 'oo', pos=4
                   2: 'q', pos=5
                   3: 'pp', pos=7
                   1: '', pos=7
                   2: 'q', pos=8
                   3: '', pos=8
                   Final: 'q', pos=8

               Notice that the final match matched "q" instead of "p", which a match without the
               "\G" anchor would have done.  Also note that the final match did not update "pos".
               "pos" is only updated on a "/g" match.  If the final match did indeed match "p",
               it's a good bet that you're running an ancient (pre-5.6.0) version of Perl.

               A useful idiom for "lex"-like scanners is "/\G.../gc".  You can combine several
               regexps like this to process a string part-by-part, doing different actions
               depending on which regexp matched.  Each regexp tries to match where the previous
               one leaves off.

                $_ = <<'EOL';
                   $url = URI::URL->new( "http://example.com/" );
                   die if $url eq "xXx";
                EOL

                LOOP: {
                    print(" digits"),       redo LOOP if /\G\d+\b[,.;]?\s*/gc;
                    print(" lowercase"),    redo LOOP
                                                   if /\G\p{Ll}+\b[,.;]?\s*/gc;
                    print(" UPPERCASE"),    redo LOOP
                                                   if /\G\p{Lu}+\b[,.;]?\s*/gc;
                    print(" Capitalized"),  redo LOOP
                                             if /\G\p{Lu}\p{Ll}+\b[,.;]?\s*/gc;
                    print(" MiXeD"),        redo LOOP if /\G\pL+\b[,.;]?\s*/gc;
                    print(" alphanumeric"), redo LOOP
                                           if /\G[\p{Alpha}\pN]+\b[,.;]?\s*/gc;
                    print(" line-noise"),   redo LOOP if /\G\W+/gc;
                    print ". That's all!\n";
                }

               Here is the output (split into several lines):

                line-noise lowercase line-noise UPPERCASE line-noise UPPERCASE
                line-noise lowercase line-noise lowercase line-noise lowercase
                lowercase line-noise lowercase lowercase line-noise lowercase
                lowercase line-noise MiXeD line-noise. That's all!

       "m?PATTERN?msixpodualngc"
               This is just like the "m/PATTERN/" search, except that it matches only once
               between calls to the "reset()" operator.  This is a useful optimization when you
               want to see only the first occurrence of something in each file of a set of files,
               for instance.  Only "m??"  patterns local to the current package are reset.

                   while (<>) {
                       if (m?^$?) {
                                           # blank line between header and body
                       }
                   } continue {
                       reset if eof;       # clear m?? status for next file
                   }

               Another example switched the first "latin1" encoding it finds to "utf8" in a pod
               file:

                   s//utf8/ if m? ^ =encoding \h+ \K latin1 ?x;

               The match-once behavior is controlled by the match delimiter being "?"; with any
               other delimiter this is the normal "m//" operator.

               In the past, the leading "m" in "m?PATTERN?" was optional, but omitting it would
               produce a deprecation warning.  As of v5.22.0, omitting it produces a syntax
               error.  If you encounter this construct in older code, you can just add "m".

       "s/PATTERN/REPLACEMENT/msixpodualngcer"
               Searches a string for a pattern, and if found, replaces that pattern with the
               replacement text and returns the number of substitutions made.  Otherwise it
               returns false (a value that is both an empty string ("") and numeric zero (0) as
               described in "Relational Operators").

               If the "/r" (non-destructive) option is used then it runs the substitution on a
               copy of the string and instead of returning the number of substitutions, it
               returns the copy whether or not a substitution occurred.  The original string is
               never changed when "/r" is used.  The copy will always be a plain string, even if
               the input is an object or a tied variable.

               If no string is specified via the "=~" or "!~" operator, the $_ variable is
               searched and modified.  Unless the "/r" option is used, the string specified must
               be a scalar variable, an array element, a hash element, or an assignment to one of
               those; that is, some sort of scalar lvalue.

               If the delimiter chosen is a single quote, no variable interpolation is done on
               either the PATTERN or the REPLACEMENT.  Otherwise, if the PATTERN contains a "$"
               that looks like a variable rather than an end-of-string test, the variable will be
               interpolated into the pattern at run-time.  If you want the pattern compiled only
               once the first time the variable is interpolated, use the "/o" option.  If the
               pattern evaluates to the empty string, the last successfully executed regular
               expression is used instead.  See perlre for further explanation on these.

               Options are as with "m//" with the addition of the following replacement specific
               options:

                   e   Evaluate the right side as an expression.
                   ee  Evaluate the right side as a string then eval the
                       result.
                   r   Return substitution and leave the original string
                       untouched.

               Any non-whitespace delimiter may replace the slashes.  Add space after the "s"
               when using a character allowed in identifiers.  If single quotes are used, no
               interpretation is done on the replacement string (the "/e" modifier overrides
               this, however).  Note that Perl treats backticks as normal delimiters; the
               replacement text is not evaluated as a command.  If the PATTERN is delimited by
               bracketing quotes, the REPLACEMENT has its own pair of quotes, which may or may
               not be bracketing quotes, for example, "s(foo)(bar)" or "s<foo>/bar/".  A "/e"
               will cause the replacement portion to be treated as a full-fledged Perl expression
               and evaluated right then and there.  It is, however, syntax checked at compile-
               time.  A second "e" modifier will cause the replacement portion to be "eval"ed
               before being run as a Perl expression.

               Examples:

                   s/\bgreen\b/mauve/g;              # don't change wintergreen

                   $path =~ s|/usr/bin|/usr/local/bin|;

                   s/Login: $foo/Login: $bar/; # run-time pattern

                   ($foo = $bar) =~ s/this/that/;      # copy first, then
                                                       # change
                   ($foo = "$bar") =~ s/this/that/;    # convert to string,
                                                       # copy, then change
                   $foo = $bar =~ s/this/that/r;       # Same as above using /r
                   $foo = $bar =~ s/this/that/r
                               =~ s/that/the other/r;  # Chained substitutes
                                                       # using /r
                   @foo = map { s/this/that/r } @bar   # /r is very useful in
                                                       # maps

                   $count = ($paragraph =~ s/Mister\b/Mr./g);  # get change-cnt

                   $_ = 'abc123xyz';
                   s/\d+/$&*2/e;               # yields 'abc246xyz'
                   s/\d+/sprintf("%5d",$&)/e;  # yields 'abc  246xyz'
                   s/\w/$& x 2/eg;             # yields 'aabbcc  224466xxyyzz'

                   s/%(.)/$percent{$1}/g;      # change percent escapes; no /e
                   s/%(.)/$percent{$1} || $&/ge;       # expr now, so /e
                   s/^=(\w+)/pod($1)/ge;       # use function call

                   $_ = 'abc123xyz';
                   $x = s/abc/def/r;           # $x is 'def123xyz' and
                                               # $_ remains 'abc123xyz'.

                   # expand variables in $_, but dynamics only, using
                   # symbolic dereferencing
                   s/\$(\w+)/${$1}/g;

                   # Add one to the value of any numbers in the string
                   s/(\d+)/1 + $1/eg;

                   # Titlecase words in the last 30 characters only (presuming
                   # that the substring doesn't start in the middle of a word)
                   substr($str, -30) =~ s/\b(\p{Alpha})(\p{Alpha}*)\b/\u$1\L$2/g;

                   # This will expand any embedded scalar variable
                   # (including lexicals) in $_ : First $1 is interpolated
                   # to the variable name, and then evaluated
                   s/(\$\w+)/$1/eeg;

                   # Delete (most) C comments.
                   $program =~ s {
                       /\*     # Match the opening delimiter.
                       .*?     # Match a minimal number of characters.
                       \*/     # Match the closing delimiter.
                   } []gsx;

                   s/^\s*(.*?)\s*$/$1/;        # trim whitespace in $_,
                                               # expensively

                   for ($variable) {           # trim whitespace in $variable,
                                               # cheap
                       s/^\s+//;
                       s/\s+$//;
                   }

                   s/([^ ]*) *([^ ]*)/$2 $1/;  # reverse 1st two fields

                   $foo !~ s/A/a/g;    # Lowercase all A's in $foo; return
                                       # 0 if any were found and changed;
                                       # otherwise return 1

               Note the use of "$" instead of "\" in the last example.  Unlike sed, we use the
               \<digit> form only in the left hand side.  Anywhere else it's $<digit>.

               Occasionally, you can't use just a "/g" to get all the changes to occur that you
               might want.  Here are two common cases:

                   # put commas in the right places in an integer
                   1 while s/(\d)(\d\d\d)(?!\d)/$1,$2/g;

                   # expand tabs to 8-column spacing
                   1 while s/\t+/' ' x (length($&)*8 - length($`)%8)/e;

               While "s///" accepts the "/c" flag, it has no effect beyond producing a warning if
               warnings are enabled.

   Quote-Like Operators
       "q/STRING/"
       'STRING'
           A single-quoted, literal string.  A backslash represents a backslash unless followed
           by the delimiter or another backslash, in which case the delimiter or backslash is
           interpolated.

               $foo = q!I said, "You said, 'She said it.'"!;
               $bar = q('This is it.');
               $baz = '\n';                # a two-character string

       "qq/STRING/"
       "STRING"
           A double-quoted, interpolated string.

               $_ .= qq
                (*** The previous line contains the naughty word "$1".\n)
                           if /\b(tcl|java|python)\b/i;      # :-)
               $baz = "\n";                # a one-character string

       "qx/STRING/"
       "`STRING`"
           A string which is (possibly) interpolated and then executed as a system command, via
           /bin/sh or its equivalent if required.  Shell wildcards, pipes, and redirections will
           be honored.  Similarly to "system", if the string contains no shell metacharacters
           then it will executed directly.  The collected standard output of the command is
           returned; standard error is unaffected.  In scalar context, it comes back as a single
           (potentially multi-line) string, or "undef" if the shell (or command) could not be
           started.  In list context, returns a list of lines (however you've defined lines with
           $/ or $INPUT_RECORD_SEPARATOR), or an empty list if the shell (or command) could not
           be started.

           Because backticks do not affect standard error, use shell file descriptor syntax
           (assuming the shell supports this) if you care to address this.  To capture a
           command's STDERR and STDOUT together:

               $output = `cmd 2>&1`;

           To capture a command's STDOUT but discard its STDERR:

               $output = `cmd 2>/dev/null`;

           To capture a command's STDERR but discard its STDOUT (ordering is important here):

               $output = `cmd 2>&1 1>/dev/null`;

           To exchange a command's STDOUT and STDERR in order to capture the STDERR but leave its
           STDOUT to come out the old STDERR:

               $output = `cmd 3>&1 1>&2 2>&3 3>&-`;

           To read both a command's STDOUT and its STDERR separately, it's easiest to redirect
           them separately to files, and then read from those files when the program is done:

               system("program args 1>program.stdout 2>program.stderr");

           The STDIN filehandle used by the command is inherited from Perl's STDIN.  For example:

               open(SPLAT, "stuff")   || die "can't open stuff: $!";
               open(STDIN, "<&SPLAT") || die "can't dupe SPLAT: $!";
               print STDOUT `sort`;

           will print the sorted contents of the file named "stuff".

           Using single-quote as a delimiter protects the command from Perl's double-quote
           interpolation, passing it on to the shell instead:

               $perl_info  = qx(ps $$);            # that's Perl's $$
               $shell_info = qx'ps $$';            # that's the new shell's $$

           How that string gets evaluated is entirely subject to the command interpreter on your
           system.  On most platforms, you will have to protect shell metacharacters if you want
           them treated literally.  This is in practice difficult to do, as it's unclear how to
           escape which characters.  See perlsec for a clean and safe example of a manual
           "fork()" and "exec()" to emulate backticks safely.

           On some platforms (notably DOS-like ones), the shell may not be capable of dealing
           with multiline commands, so putting newlines in the string may not get you what you
           want.  You may be able to evaluate multiple commands in a single line by separating
           them with the command separator character, if your shell supports that (for example,
           ";" on many Unix shells and "&" on the Windows NT "cmd" shell).

           Perl will attempt to flush all files opened for output before starting the child
           process, but this may not be supported on some platforms (see perlport).  To be safe,
           you may need to set $| ($AUTOFLUSH in "English") or call the "autoflush()" method of
           "IO::Handle" on any open handles.

           Beware that some command shells may place restrictions on the length of the command
           line.  You must ensure your strings don't exceed this limit after any necessary
           interpolations.  See the platform-specific release notes for more details about your
           particular environment.

           Using this operator can lead to programs that are difficult to port, because the shell
           commands called vary between systems, and may in fact not be present at all.  As one
           example, the "type" command under the POSIX shell is very different from the "type"
           command under DOS.  That doesn't mean you should go out of your way to avoid backticks
           when they're the right way to get something done.  Perl was made to be a glue
           language, and one of the things it glues together is commands.  Just understand what
           you're getting yourself into.

           Like "system", backticks put the child process exit code in $?.  If you'd like to
           manually inspect failure, you can check all possible failure modes by inspecting $?
           like this:

               if ($? == -1) {
                   print "failed to execute: $!\n";
               }
               elsif ($? & 127) {
                   printf "child died with signal %d, %s coredump\n",
                       ($? & 127),  ($? & 128) ? 'with' : 'without';
               }
               else {
                   printf "child exited with value %d\n", $? >> 8;
               }

           Use the open pragma to control the I/O layers used when reading the output of the
           command, for example:

             use open IN => ":encoding(UTF-8)";
             my $x = `cmd-producing-utf-8`;

           "qx//" can also be called like a function with "readpipe" in perlfunc.

           See "I/O Operators" for more discussion.

       "qw/STRING/"
           Evaluates to a list of the words extracted out of STRING, using embedded whitespace as
           the word delimiters.  It can be understood as being roughly equivalent to:

               split(" ", q/STRING/);

           the differences being that it only splits on ASCII whitespace, generates a real list
           at compile time, and in scalar context it returns the last element in the list.  So
           this expression:

               qw(foo bar baz)

           is semantically equivalent to the list:

               "foo", "bar", "baz"

           Some frequently seen examples:

               use POSIX qw( setlocale localeconv )
               @EXPORT = qw( foo bar baz );

           A common mistake is to try to separate the words with commas or to put comments into a
           multi-line "qw"-string.  For this reason, the "use warnings" pragma and the -w switch
           (that is, the $^W variable) produces warnings if the STRING contains the "," or the
           "#" character.

       "tr/SEARCHLIST/REPLACEMENTLIST/cdsr"
       "y/SEARCHLIST/REPLACEMENTLIST/cdsr"
           Transliterates all occurrences of the characters found (or not found if the "/c"
           modifier is specified) in the search list with the positionally corresponding
           character in the replacement list, possibly deleting some, depending on the modifiers
           specified.  It returns the number of characters replaced or deleted.  If no string is
           specified via the "=~" or "!~" operator, the $_ string is transliterated.

           For sed devotees, "y" is provided as a synonym for "tr".

           If the "/r" (non-destructive) option is present, a new copy of the string is made and
           its characters transliterated, and this copy is returned no matter whether it was
           modified or not: the original string is always left unchanged.  The new copy is always
           a plain string, even if the input string is an object or a tied variable.

           Unless the "/r" option is used, the string specified with "=~" must be a scalar
           variable, an array element, a hash element, or an assignment to one of those; in other
           words, an lvalue.

           The characters delimitting SEARCHLIST and REPLACEMENTLIST can be any printable
           character, not just forward slashes.  If they are single quotes
           ("tr'SEARCHLIST'REPLACEMENTLIST'"), the only interpolation is removal of "\" from
           pairs of "\\"; so hyphens are interpreted literally rather than specifying a character
           range.

           Otherwise, a character range may be specified with a hyphen, so "tr/A-J/0-9/" does the
           same replacement as "tr/ACEGIBDFHJ/0246813579/".

           If the SEARCHLIST is delimited by bracketing quotes, the REPLACEMENTLIST must have its
           own pair of quotes, which may or may not be bracketing quotes; for example,
           "tr(aeiouy)(yuoiea)" or "tr[+\-*/]"ABCD"".  This final example shows a way to visually
           clarify what is going on for people who are more familiar with regular expression
           patterns than with "tr", and who may think forward slash delimiters imply that "tr" is
           more like a regular expression pattern than it actually is.  (Another option might be
           to use "tr[...][...]".)

           "tr" isn't fully like bracketed character classes, just (significantly) more like them
           than it is to full patterns.  For example, characters appearing more than once in
           either list behave differently here than in patterns, and "tr" lists do not allow
           backslashed character classes such as "\d" or "\pL", nor variable interpolation, so
           "$" and "@" are always treated as literals.

           The allowed elements are literals plus "\'" (meaning a single quote).  If the
           delimiters aren't single quotes, also allowed are any of the escape sequences accepted
           in double-quoted strings.  Escape sequence details are in the table near the beginning
           of this section.

           A hyphen at the beginning or end, or preceded by a backslash is also always considered
           a literal.  Precede a delimiter character with a backslash to allow it.

           The "tr" operator is not equivalent to the tr(1) utility.  "tr[a-z][A-Z]" will
           uppercase the 26 letters "a" through "z", but for case changing not confined to ASCII,
           use "lc", "uc", "lcfirst", "ucfirst" (all documented in perlfunc), or the substitution
           operator "s/PATTERN/REPLACEMENT/" (with "\U", "\u", "\L", and "\l" string-
           interpolation escapes in the REPLACEMENT portion).

           Most ranges are unportable between character sets, but certain ones signal Perl to do
           special handling to make them portable.  There are two classes of portable ranges.
           The first are any subsets of the ranges "A-Z", "a-z", and "0-9", when expressed as
           literal characters.

             tr/h-k/H-K/

           capitalizes the letters "h", "i", "j", and "k" and nothing else, no matter what the
           platform's character set is.  In contrast, all of

             tr/\x68-\x6B/\x48-\x4B/
             tr/h-\x6B/H-\x4B/
             tr/\x68-k/\x48-K/

           do the same capitalizations as the previous example when run on ASCII platforms, but
           something completely different on EBCDIC ones.

           The second class of portable ranges is invoked when one or both of the range's end
           points are expressed as "\N{...}"

            $string =~ tr/\N{U+20}-\N{U+7E}//d;

           removes from $string all the platform's characters which are equivalent to any of
           Unicode U+0020, U+0021, ... U+007D, U+007E.  This is a portable range, and has the
           same effect on every platform it is run on.  In this example, these are the ASCII
           printable characters.  So after this is run, $string has only controls and characters
           which have no ASCII equivalents.

           But, even for portable ranges, it is not generally obvious what is included without
           having to look things up in the manual.  A sound principle is to use only ranges that
           both begin from, and end at, either ASCII alphabetics of equal case ("b-e", "B-E"), or
           digits ("1-4").  Anything else is unclear (and unportable unless "\N{...}" is used).
           If in doubt, spell out the character sets in full.

           Options:

               c   Complement the SEARCHLIST.
               d   Delete found but unreplaced characters.
               r   Return the modified string and leave the original string
                   untouched.
               s   Squash duplicate replaced characters.

           If the "/d" modifier is specified, any characters specified by SEARCHLIST  not found
           in REPLACEMENTLIST are deleted.  (Note that this is slightly more flexible than the
           behavior of some tr programs, which delete anything they find in the SEARCHLIST,
           period.)

           If the "/s" modifier is specified, sequences of characters, all in a row, that were
           transliterated to the same character are squashed down to a single instance of that
           character.

            my $a = "aaabbbca";
            $a =~ tr/ab/dd/s;     # $a now is "dcd"

           If the "/d" modifier is used, the REPLACEMENTLIST is always interpreted exactly as
           specified.  Otherwise, if the REPLACEMENTLIST is shorter than the SEARCHLIST, the
           final character, if any, is replicated until it is long enough.  There won't be a
           final character if and only if the REPLACEMENTLIST is empty, in which case
           REPLACEMENTLIST is copied from SEARCHLIST.    An empty REPLACEMENTLIST is useful for
           counting characters in a class, or for squashing character sequences in a class.

               tr/abcd//            tr/abcd/abcd/
               tr/abcd/AB/          tr/abcd/ABBB/
               tr/abcd//d           s/[abcd]//g
               tr/abcd/AB/d         (tr/ab/AB/ + s/[cd]//g)  - but run together

           If the "/c" modifier is specified, the characters to be transliterated are the ones
           NOT in SEARCHLIST, that is, it is complemented.  If "/d" and/or "/s" are also
           specified, they apply to the complemented SEARCHLIST.  Recall, that if REPLACEMENTLIST
           is empty (except under "/d") a copy of SEARCHLIST is used instead.  That copy is made
           after complementing under "/c".  SEARCHLIST is sorted by code point order after
           complementing, and any REPLACEMENTLIST  is applied to that sorted result.  This means
           that under "/c", the order of the characters specified in SEARCHLIST is irrelevant.
           This can lead to different results on EBCDIC systems if REPLACEMENTLIST contains more
           than one character, hence it is generally non-portable to use "/c" with such a
           REPLACEMENTLIST.

           Another way of describing the operation is this: If "/c" is specified, the SEARCHLIST
           is sorted by code point order, then complemented.  If REPLACEMENTLIST is empty and
           "/d" is not specified, REPLACEMENTLIST is replaced by a copy of SEARCHLIST (as
           modified under "/c"), and these potentially modified lists are used as the basis for
           what follows.  Any character in the target string that isn't in SEARCHLIST is passed
           through unchanged.  Every other character in the target string is replaced by the
           character in REPLACEMENTLIST that positionally corresponds to its mate in SEARCHLIST,
           except that under "/s", the 2nd and following characters are squeezed out in a
           sequence of characters in a row that all translate to the same character.  If
           SEARCHLIST is longer than REPLACEMENTLIST, characters in the target string that match
           a character in SEARCHLIST that doesn't have a correspondence in REPLACEMENTLIST are
           either deleted from the target string if "/d" is specified; or replaced by the final
           character in REPLACEMENTLIST if "/d" isn't specified.

           Some examples:

            $ARGV[1] =~ tr/A-Z/a-z/;   # canonicalize to lower case ASCII

            $cnt = tr/*/*/;            # count the stars in $_
            $cnt = tr/*//;             # same thing

            $cnt = $sky =~ tr/*/*/;    # count the stars in $sky
            $cnt = $sky =~ tr/*//;     # same thing

            $cnt = $sky =~ tr/*//c;    # count all the non-stars in $sky
            $cnt = $sky =~ tr/*/*/c;   # same, but transliterate each non-star
                                       # into a star, leaving the already-stars
                                       # alone.  Afterwards, everything in $sky
                                       # is a star.

            $cnt = tr/0-9//;           # count the ASCII digits in $_

            tr/a-zA-Z//s;              # bookkeeper -> bokeper
            tr/o/o/s;                  # bookkeeper -> bokkeeper
            tr/oe/oe/s;                # bookkeeper -> bokkeper
            tr/oe//s;                  # bookkeeper -> bokkeper
            tr/oe/o/s;                 # bookkeeper -> bokkopor

            ($HOST = $host) =~ tr/a-z/A-Z/;
             $HOST = $host  =~ tr/a-z/A-Z/r; # same thing

            $HOST = $host =~ tr/a-z/A-Z/r   # chained with s///r
                          =~ s/:/ -p/r;

            tr/a-zA-Z/ /cs;                 # change non-alphas to single space

            @stripped = map tr/a-zA-Z/ /csr, @original;
                                            # /r with map

            tr [\200-\377]
               [\000-\177];                 # wickedly delete 8th bit

            $foo !~ tr/A/a/    # transliterate all the A's in $foo to 'a',
                               # return 0 if any were found and changed.
                               # Otherwise return 1

           If multiple transliterations are given for a character, only the first one is used:

            tr/AAA/XYZ/

           will transliterate any A to X.

           Because the transliteration table is built at compile time, neither the SEARCHLIST nor
           the REPLACEMENTLIST are subjected to double quote interpolation.  That means that if
           you want to use variables, you must use an "eval()":

            eval "tr/$oldlist/$newlist/";
            die $@ if $@;

            eval "tr/$oldlist/$newlist/, 1" or die $@;

       "<<EOF"
           A line-oriented form of quoting is based on the shell "here-document" syntax.
           Following a "<<" you specify a string to terminate the quoted material, and all lines
           following the current line down to the terminating string are the value of the item.

           Prefixing the terminating string with a "~" specifies that you want to use "Indented
           Here-docs" (see below).

           The terminating string may be either an identifier (a word), or some quoted text.  An
           unquoted identifier works like double quotes.  There may not be a space between the
           "<<" and the identifier, unless the identifier is explicitly quoted.  The terminating
           string must appear by itself (unquoted and with no surrounding whitespace) on the
           terminating line.

           If the terminating string is quoted, the type of quotes used determine the treatment
           of the text.

           Double Quotes
               Double quotes indicate that the text will be interpolated using exactly the same
               rules as normal double quoted strings.

                      print <<EOF;
                   The price is $Price.
                   EOF

                      print << "EOF"; # same as above
                   The price is $Price.
                   EOF

           Single Quotes
               Single quotes indicate the text is to be treated literally with no interpolation
               of its content.  This is similar to single quoted strings except that backslashes
               have no special meaning, with "\\" being treated as two backslashes and not one as
               they would in every other quoting construct.

               Just as in the shell, a backslashed bareword following the "<<" means the same
               thing as a single-quoted string does:

                       $cost = <<'VISTA';  # hasta la ...
                   That'll be $10 please, ma'am.
                   VISTA

                       $cost = <<\VISTA;   # Same thing!
                   That'll be $10 please, ma'am.
                   VISTA

               This is the only form of quoting in perl where there is no need to worry about
               escaping content, something that code generators can and do make good use of.

           Backticks
               The content of the here doc is treated just as it would be if the string were
               embedded in backticks.  Thus the content is interpolated as though it were double
               quoted and then executed via the shell, with the results of the execution
               returned.

                      print << `EOC`; # execute command and get results
                   echo hi there
                   EOC

           Indented Here-docs
               The here-doc modifier "~" allows you to indent your here-docs to make the code
               more readable:

                   if ($some_var) {
                     print <<~EOF;
                       This is a here-doc
                       EOF
                   }

               This will print...

                   This is a here-doc

               ...with no leading whitespace.

               The line containing the delimiter that marks the end of the here-doc determines
               the indentation template for the whole thing.  Compilation croaks if any non-empty
               line inside the here-doc does not begin with the precise indentation of the
               terminating line.  (An empty line consists of the single character "\n".)  For
               example, suppose the terminating line begins with a tab character followed by 4
               space characters.  Every non-empty line in the here-doc must begin with a tab
               followed by 4 spaces.  They are stripped from each line, and any leading white
               space remaining on a line serves as the indentation for that line.  Currently,
               only the TAB and SPACE characters are treated as whitespace for this purpose.
               Tabs and spaces may be mixed, but are matched exactly; tabs remain tabs and are
               not expanded.

               Additional beginning whitespace (beyond what preceded the delimiter) will be
               preserved:

                   print <<~EOF;
                     This text is not indented
                       This text is indented with two spaces
                               This text is indented with two tabs
                     EOF

               Finally, the modifier may be used with all of the forms mentioned above:

                   <<~\EOF;
                   <<~'EOF'
                   <<~"EOF"
                   <<~`EOF`

               And whitespace may be used between the "~" and quoted delimiters:

                   <<~ 'EOF'; # ... "EOF", `EOF`

           It is possible to stack multiple here-docs in a row:

                  print <<"foo", <<"bar"; # you can stack them
               I said foo.
               foo
               I said bar.
               bar

                  myfunc(<< "THIS", 23, <<'THAT');
               Here's a line
               or two.
               THIS
               and here's another.
               THAT

           Just don't forget that you have to put a semicolon on the end to finish the statement,
           as Perl doesn't know you're not going to try to do this:

                  print <<ABC
               179231
               ABC
                  + 20;

           If you want to remove the line terminator from your here-docs, use "chomp()".

               chomp($string = <<'END');
               This is a string.
               END

           If you want your here-docs to be indented with the rest of the code, use the "<<~FOO"
           construct described under "Indented Here-docs":

               $quote = <<~'FINIS';
                  The Road goes ever on and on,
                  down from the door where it began.
                  FINIS

           If you use a here-doc within a delimited construct, such as in "s///eg", the quoted
           material must still come on the line following the "<<FOO" marker, which means it may
           be inside the delimited construct:

               s/this/<<E . 'that'
               the other
               E
                . 'more '/eg;

           It works this way as of Perl 5.18.  Historically, it was inconsistent, and you would
           have to write

               s/this/<<E . 'that'
                . 'more '/eg;
               the other
               E

           outside of string evals.

           Additionally, quoting rules for the end-of-string identifier are unrelated to Perl's
           quoting rules.  "q()", "qq()", and the like are not supported in place of '' and "",
           and the only interpolation is for backslashing the quoting character:

               print << "abc\"def";
               testing...
               abc"def

           Finally, quoted strings cannot span multiple lines.  The general rule is that the
           identifier must be a string literal.  Stick with that, and you should be safe.

   Gory details of parsing quoted constructs
       When presented with something that might have several different interpretations, Perl uses
       the DWIM (that's "Do What I Mean") principle to pick the most probable interpretation.
       This strategy is so successful that Perl programmers often do not suspect the ambivalence
       of what they write.  But from time to time, Perl's notions differ substantially from what
       the author honestly meant.

       This section hopes to clarify how Perl handles quoted constructs.  Although the most
       common reason to learn this is to unravel labyrinthine regular expressions, because the
       initial steps of parsing are the same for all quoting operators, they are all discussed
       together.

       The most important Perl parsing rule is the first one discussed below: when processing a
       quoted construct, Perl first finds the end of that construct, then interprets its
       contents.  If you understand this rule, you may skip the rest of this section on the first
       reading.  The other rules are likely to contradict the user's expectations much less
       frequently than this first one.

       Some passes discussed below are performed concurrently, but because their results are the
       same, we consider them individually.  For different quoting constructs, Perl performs
       different numbers of passes, from one to four, but these passes are always performed in
       the same order.

       Finding the end
           The first pass is finding the end of the quoted construct.  This results in saving to
           a safe location a copy of the text (between the starting and ending delimiters),
           normalized as necessary to avoid needing to know what the original delimiters were.

           If the construct is a here-doc, the ending delimiter is a line that has a terminating
           string as the content.  Therefore "<<EOF" is terminated by "EOF" immediately followed
           by "\n" and starting from the first column of the terminating line.  When searching
           for the terminating line of a here-doc, nothing is skipped.  In other words, lines
           after the here-doc syntax are compared with the terminating string line by line.

           For the constructs except here-docs, single characters are used as starting and ending
           delimiters.  If the starting delimiter is an opening punctuation (that is "(", "[",
           "{", or "<"), the ending delimiter is the corresponding closing punctuation (that is
           ")", "]", "}", or ">").  If the starting delimiter is an unpaired character like "/"
           or a closing punctuation, the ending delimiter is the same as the starting delimiter.
           Therefore a "/" terminates a "qq//" construct, while a "]" terminates both "qq[]" and
           "qq]]" constructs.

           When searching for single-character delimiters, escaped delimiters and "\\" are
           skipped.  For example, while searching for terminating "/", combinations of "\\" and
           "\/" are skipped.  If the delimiters are bracketing, nested pairs are also skipped.
           For example, while searching for a closing "]" paired with the opening "[",
           combinations of "\\", "\]", and "\[" are all skipped, and nested "[" and "]" are
           skipped as well.  However, when backslashes are used as the delimiters (like "qq\\"
           and "tr\\\"), nothing is skipped.  During the search for the end, backslashes that
           escape delimiters or other backslashes are removed (exactly speaking, they are not
           copied to the safe location).

           For constructs with three-part delimiters ("s///", "y///", and "tr///"), the search is
           repeated once more.  If the first delimiter is not an opening punctuation, the three
           delimiters must be the same, such as "s!!!" and "tr)))", in which case the second
           delimiter terminates the left part and starts the right part at once.  If the left
           part is delimited by bracketing punctuation (that is "()", "[]", "{}", or "<>"), the
           right part needs another pair of delimiters such as "s(){}" and "tr[]//".  In these
           cases, whitespace and comments are allowed between the two parts, although the comment
           must follow at least one whitespace character; otherwise a character expected as the
           start of the comment may be regarded as the starting delimiter of the right part.

           During this search no attention is paid to the semantics of the construct.  Thus:

               "$hash{"$foo/$bar"}"

           or:

               m/
                 bar       # NOT a comment, this slash / terminated m//!
                /x

           do not form legal quoted expressions.   The quoted part ends on the first """ and "/",
           and the rest happens to be a syntax error.  Because the slash that terminated "m//"
           was followed by a "SPACE", the example above is not "m//x", but rather "m//" with no
           "/x" modifier.  So the embedded "#" is interpreted as a literal "#".

           Also no attention is paid to "\c\" (multichar control char syntax) during this search.
           Thus the second "\" in "qq/\c\/" is interpreted as a part of "\/", and the following
           "/" is not recognized as a delimiter.  Instead, use "\034" or "\x1c" at the end of
           quoted constructs.

       Interpolation
           The next step is interpolation in the text obtained, which is now delimiter-
           independent.  There are multiple cases.

           "<<'EOF'"
               No interpolation is performed.  Note that the combination "\\" is left intact,
               since escaped delimiters are not available for here-docs.

           "m''", the pattern of "s'''"
               No interpolation is performed at this stage.  Any backslashed sequences including
               "\\" are treated at the stage of "Parsing regular expressions".

           '', "q//", "tr'''", "y'''", the replacement of "s'''"
               The only interpolation is removal of "\" from pairs of "\\".  Therefore "-" in
               "tr'''" and "y'''" is treated literally as a hyphen and no character range is
               available.  "\1" in the replacement of "s'''" does not work as $1.

           "tr///", "y///"
               No variable interpolation occurs.  String modifying combinations for case and
               quoting such as "\Q", "\U", and "\E" are not recognized.  The other escape
               sequences such as "\200" and "\t" and backslashed characters such as "\\" and "\-"
               are converted to appropriate literals.  The character "-" is treated specially and
               therefore "\-" is treated as a literal "-".

           "", "``", "qq//", "qx//", "<file*glob>", "<<"EOF""
               "\Q", "\U", "\u", "\L", "\l", "\F" (possibly paired with "\E") are converted to
               corresponding Perl constructs.  Thus, "$foo\Qbaz$bar" is converted to
               "$foo . (quotemeta("baz" . $bar))" internally.  The other escape sequences such as
               "\200" and "\t" and backslashed characters such as "\\" and "\-" are replaced with
               appropriate expansions.

               Let it be stressed that whatever falls between "\Q" and "\E" is interpolated in
               the usual way.  Something like "\Q\\E" has no "\E" inside.  Instead, it has "\Q",
               "\\", and "E", so the result is the same as for "\\\\E".  As a general rule,
               backslashes between "\Q" and "\E" may lead to counterintuitive results.  So,
               "\Q\t\E" is converted to "quotemeta("\t")", which is the same as "\\\t" (since TAB
               is not alphanumeric).  Note also that:

                 $str = '\t';
                 return "\Q$str";

               may be closer to the conjectural intention of the writer of "\Q\t\E".

               Interpolated scalars and arrays are converted internally to the "join" and "."
               catenation operations.  Thus, "$foo XXX '@arr'" becomes:

                 $foo . " XXX '" . (join $", @arr) . "'";

               All operations above are performed simultaneously, left to right.

               Because the result of "\Q STRING \E" has all metacharacters quoted, there is no
               way to insert a literal "$" or "@" inside a "\Q\E" pair.  If protected by "\", "$"
               will be quoted to become "\\\$"; if not, it is interpreted as the start of an
               interpolated scalar.

               Note also that the interpolation code needs to make a decision on where the
               interpolated scalar ends.  For instance, whether "a $x -> {c}" really means:

                 "a " . $x . " -> {c}";

               or:

                 "a " . $x -> {c};

               Most of the time, the longest possible text that does not include spaces between
               components and which contains matching braces or brackets.  because the outcome
               may be determined by voting based on heuristic estimators, the result is not
               strictly predictable.  Fortunately, it's usually correct for ambiguous cases.

           The replacement of "s///"
               Processing of "\Q", "\U", "\u", "\L", "\l", "\F" and interpolation happens as with
               "qq//" constructs.

               It is at this step that "\1" is begrudgingly converted to $1 in the replacement
               text of "s///", in order to correct the incorrigible sed hackers who haven't
               picked up the saner idiom yet.  A warning is emitted if the "use warnings" pragma
               or the -w command-line flag (that is, the $^W variable) was set.

           "RE" in "m?RE?", "/RE/", "m/RE/", "s/RE/foo/",
               Processing of "\Q", "\U", "\u", "\L", "\l", "\F", "\E", and interpolation happens
               (almost) as with "qq//" constructs.

               Processing of "\N{...}" is also done here, and compiled into an intermediate form
               for the regex compiler.  (This is because, as mentioned below, the regex
               compilation may be done at execution time, and "\N{...}" is a compile-time
               construct.)

               However any other combinations of "\" followed by a character are not substituted
               but only skipped, in order to parse them as regular expressions at the following
               step.  As "\c" is skipped at this step, "@" of "\c@" in RE is possibly treated as
               an array symbol (for example @foo), even though the same text in "qq//" gives
               interpolation of "\c@".

               Code blocks such as "(?{BLOCK})" are handled by temporarily passing control back
               to the perl parser, in a similar way that an interpolated array subscript
               expression such as "foo$array[1+f("[xyz")]bar" would be.

               Moreover, inside "(?{BLOCK})", "(?# comment )", and a "#"-comment in a
               "/x"-regular expression, no processing is performed whatsoever.  This is the first
               step at which the presence of the "/x" modifier is relevant.

               Interpolation in patterns has several quirks: $|, $(, $), "@+" and "@-" are not
               interpolated, and constructs $var[SOMETHING] are voted (by several different
               estimators) to be either an array element or $var followed by an RE alternative.
               This is where the notation "${arr[$bar]}" comes handy: "/${arr[0-9]}/" is
               interpreted as array element "-9", not as a regular expression from the variable
               $arr followed by a digit, which would be the interpretation of "/$arr[0-9]/".
               Since voting among different estimators may occur, the result is not predictable.

               The lack of processing of "\\" creates specific restrictions on the post-processed
               text.  If the delimiter is "/", one cannot get the combination "\/" into the
               result of this step.  "/" will finish the regular expression, "\/" will be
               stripped to "/" on the previous step, and "\\/" will be left as is.  Because "/"
               is equivalent to "\/" inside a regular expression, this does not matter unless the
               delimiter happens to be character special to the RE engine, such as in
               "s*foo*bar*", "m[foo]", or "m?foo?"; or an alphanumeric char, as in:

                 m m ^ a \s* b mmx;

               In the RE above, which is intentionally obfuscated for illustration, the delimiter
               is "m", the modifier is "mx", and after delimiter-removal the RE is the same as
               for "m/ ^ a \s* b /mx".  There's more than one reason you're encouraged to
               restrict your delimiters to non-alphanumeric, non-whitespace choices.

           This step is the last one for all constructs except regular expressions, which are
           processed further.

       Parsing regular expressions
           Previous steps were performed during the compilation of Perl code, but this one
           happens at run time, although it may be optimized to be calculated at compile time if
           appropriate.  After preprocessing described above, and possibly after evaluation if
           concatenation, joining, casing translation, or metaquoting are involved, the resulting
           string is passed to the RE engine for compilation.

           Whatever happens in the RE engine might be better discussed in perlre, but for the
           sake of continuity, we shall do so here.

           This is another step where the presence of the "/x" modifier is relevant.  The RE
           engine scans the string from left to right and converts it into a finite automaton.

           Backslashed characters are either replaced with corresponding literal strings (as with
           "\{"), or else they generate special nodes in the finite automaton (as with "\b").
           Characters special to the RE engine (such as "|") generate corresponding nodes or
           groups of nodes.  "(?#...)" comments are ignored.  All the rest is either converted to
           literal strings to match, or else is ignored (as is whitespace and "#"-style comments
           if "/x" is present).

           Parsing of the bracketed character class construct, "[...]", is rather different than
           the rule used for the rest of the pattern.  The terminator of this construct is found
           using the same rules as for finding the terminator of a "{}"-delimited construct, the
           only exception being that "]" immediately following "[" is treated as though preceded
           by a backslash.

           The terminator of runtime "(?{...})" is found by temporarily switching control to the
           perl parser, which should stop at the point where the logically balancing terminating
           "}" is found.

           It is possible to inspect both the string given to RE engine and the resulting finite
           automaton.  See the arguments "debug"/"debugcolor" in the "use re" pragma, as well as
           Perl's -Dr command-line switch documented in "Command Switches" in perlrun.

       Optimization of regular expressions
           This step is listed for completeness only.  Since it does not change semantics,
           details of this step are not documented and are subject to change without notice.
           This step is performed over the finite automaton that was generated during the
           previous pass.

           It is at this stage that "split()" silently optimizes "/^/" to mean "/^/m".

   I/O Operators
       There are several I/O operators you should know about.

       A string enclosed by backticks (grave accents) first undergoes double-quote interpolation.
       It is then interpreted as an external command, and the output of that command is the value
       of the backtick string, like in a shell.  In scalar context, a single string consisting of
       all output is returned.  In list context, a list of values is returned, one per line of
       output.  (You can set $/ to use a different line terminator.)  The command is executed
       each time the pseudo-literal is evaluated.  The status value of the command is returned in
       $? (see perlvar for the interpretation of $?).  Unlike in csh, no translation is done on
       the return data--newlines remain newlines.  Unlike in any of the shells, single quotes do
       not hide variable names in the command from interpretation.  To pass a literal dollar-sign
       through to the shell you need to hide it with a backslash.  The generalized form of
       backticks is "qx//", or you can call the "readpipe" in perlfunc function.  (Because
       backticks always undergo shell expansion as well, see perlsec for security concerns.)

       In scalar context, evaluating a filehandle in angle brackets yields the next line from
       that file (the newline, if any, included), or "undef" at end-of-file or on error.  When $/
       is set to "undef" (sometimes known as file-slurp mode) and the file is empty, it returns
       '' the first time, followed by "undef" subsequently.

       Ordinarily you must assign the returned value to a variable, but there is one situation
       where an automatic assignment happens.  If and only if the input symbol is the only thing
       inside the conditional of a "while" statement (even if disguised as a "for(;;)" loop), the
       value is automatically assigned to the global variable $_, destroying whatever was there
       previously.  (This may seem like an odd thing to you, but you'll use the construct in
       almost every Perl script you write.)  The $_ variable is not implicitly localized.  You'll
       have to put a "local $_;" before the loop if you want that to happen.  Furthermore, if the
       input symbol or an explicit assignment of the input symbol to a scalar is used as a
       "while"/"for" condition, then the condition actually tests for definedness of the
       expression's value, not for its regular truth value.

       Thus the following lines are equivalent:

           while (defined($_ = <STDIN>)) { print; }
           while ($_ = <STDIN>) { print; }
           while (<STDIN>) { print; }
           for (;<STDIN>;) { print; }
           print while defined($_ = <STDIN>);
           print while ($_ = <STDIN>);
           print while <STDIN>;

       This also behaves similarly, but assigns to a lexical variable instead of to $_:

           while (my $line = <STDIN>) { print $line }

       In these loop constructs, the assigned value (whether assignment is automatic or explicit)
       is then tested to see whether it is defined.  The defined test avoids problems where the
       line has a string value that would be treated as false by Perl; for example a "" or a "0"
       with no trailing newline.  If you really mean for such values to terminate the loop, they
       should be tested for explicitly:

           while (($_ = <STDIN>) ne '0') { ... }
           while (<STDIN>) { last unless $_; ... }

       In other boolean contexts, "<FILEHANDLE>" without an explicit "defined" test or comparison
       elicits a warning if the "use warnings" pragma or the -w command-line switch (the $^W
       variable) is in effect.

       The filehandles STDIN, STDOUT, and STDERR are predefined.  (The filehandles "stdin",
       "stdout", and "stderr" will also work except in packages, where they would be interpreted
       as local identifiers rather than global.)  Additional filehandles may be created with the
       "open()" function, amongst others.  See perlopentut and "open" in perlfunc for details on
       this.

       If a "<FILEHANDLE>" is used in a context that is looking for a list, a list comprising all
       input lines is returned, one line per list element.  It's easy to grow to a rather large
       data space this way, so use with care.

       "<FILEHANDLE>"  may also be spelled "readline(*FILEHANDLE)".  See "readline" in perlfunc.

       The null filehandle "<>" (sometimes called the diamond operator) is special: it can be
       used to emulate the behavior of sed and awk, and any other Unix filter program that takes
       a list of filenames, doing the same to each line of input from all of them.  Input from
       "<>" comes either from standard input, or from each file listed on the command line.
       Here's how it works: the first time "<>" is evaluated, the @ARGV array is checked, and if
       it is empty, $ARGV[0] is set to "-", which when opened gives you standard input.  The
       @ARGV array is then processed as a list of filenames.  The loop

           while (<>) {
               ...                     # code for each line
           }

       is equivalent to the following Perl-like pseudo code:

           unshift(@ARGV, '-') unless @ARGV;
           while ($ARGV = shift) {
               open(ARGV, $ARGV);
               while (<ARGV>) {
                   ...         # code for each line
               }
           }

       except that it isn't so cumbersome to say, and will actually work.  It really does shift
       the @ARGV array and put the current filename into the $ARGV variable.  It also uses
       filehandle ARGV internally.  "<>" is just a synonym for "<ARGV>", which is magical.  (The
       pseudo code above doesn't work because it treats "<ARGV>" as non-magical.)

       Since the null filehandle uses the two argument form of "open" in perlfunc it interprets
       special characters, so if you have a script like this:

           while (<>) {
               print;
           }

       and call it with "perl dangerous.pl 'rm -rfv *|'", it actually opens a pipe, executes the
       "rm" command and reads "rm"'s output from that pipe.  If you want all items in @ARGV to be
       interpreted as file names, you can use the module "ARGV::readonly" from CPAN, or use the
       double diamond bracket:

           while (<<>>) {
               print;
           }

       Using double angle brackets inside of a while causes the open to use the three argument
       form (with the second argument being "<"), so all arguments in "ARGV" are treated as
       literal filenames (including "-").  (Note that for convenience, if you use "<<>>" and if
       @ARGV is empty, it will still read from the standard input.)

       You can modify @ARGV before the first "<>" as long as the array ends up containing the
       list of filenames you really want.  Line numbers ($.)  continue as though the input were
       one big happy file.  See the example in "eof" in perlfunc for how to reset line numbers on
       each file.

       If you want to set @ARGV to your own list of files, go right ahead.  This sets @ARGV to
       all plain text files if no @ARGV was given:

           @ARGV = grep { -f && -T } glob('*') unless @ARGV;

       You can even set them to pipe commands.  For example, this automatically filters
       compressed arguments through gzip:

           @ARGV = map { /\.(gz|Z)$/ ? "gzip -dc < $_ |" : $_ } @ARGV;

       If you want to pass switches into your script, you can use one of the "Getopts" modules or
       put a loop on the front like this:

           while ($_ = $ARGV[0], /^-/) {
               shift;
               last if /^--$/;
               if (/^-D(.*)/) { $debug = $1 }
               if (/^-v/)     { $verbose++  }
               # ...           # other switches
           }

           while (<>) {
               # ...           # code for each line
           }

       The "<>" symbol will return "undef" for end-of-file only once.  If you call it again after
       this, it will assume you are processing another @ARGV list, and if you haven't set @ARGV,
       will read input from STDIN.

       If what the angle brackets contain is a simple scalar variable (for example, $foo), then
       that variable contains the name of the filehandle to input from, or its typeglob, or a
       reference to the same.  For example:

           $fh = \*STDIN;
           $line = <$fh>;

       If what's within the angle brackets is neither a filehandle nor a simple scalar variable
       containing a filehandle name, typeglob, or typeglob reference, it is interpreted as a
       filename pattern to be globbed, and either a list of filenames or the next filename in the
       list is returned, depending on context.  This distinction is determined on syntactic
       grounds alone.  That means "<$x>" is always a "readline()" from an indirect handle, but
       "<$hash{key}>" is always a "glob()".  That's because $x is a simple scalar variable, but
       $hash{key} is not--it's a hash element.  Even "<$x >" (note the extra space) is treated as
       "glob("$x ")", not "readline($x)".

       One level of double-quote interpretation is done first, but you can't say "<$foo>" because
       that's an indirect filehandle as explained in the previous paragraph.  (In older versions
       of Perl, programmers would insert curly brackets to force interpretation as a filename
       glob: "<${foo}>".  These days, it's considered cleaner to call the internal function
       directly as "glob($foo)", which is probably the right way to have done it in the first
       place.)  For example:

           while (<*.c>) {
               chmod 0644, $_;
           }

       is roughly equivalent to:

           open(FOO, "echo *.c | tr -s ' \t\r\f' '\\012\\012\\012\\012'|");
           while (<FOO>) {
               chomp;
               chmod 0644, $_;
           }

       except that the globbing is actually done internally using the standard "File::Glob"
       extension.  Of course, the shortest way to do the above is:

           chmod 0644, <*.c>;

       A (file)glob evaluates its (embedded) argument only when it is starting a new list.  All
       values must be read before it will start over.  In list context, this isn't important
       because you automatically get them all anyway.  However, in scalar context the operator
       returns the next value each time it's called, or "undef" when the list has run out.  As
       with filehandle reads, an automatic "defined" is generated when the glob occurs in the
       test part of a "while", because legal glob returns (for example, a file called 0) would
       otherwise terminate the loop.  Again, "undef" is returned only once.  So if you're
       expecting a single value from a glob, it is much better to say

           ($file) = <blurch*>;

       than

           $file = <blurch*>;

       because the latter will alternate between returning a filename and returning false.

       If you're trying to do variable interpolation, it's definitely better to use the "glob()"
       function, because the older notation can cause people to become confused with the indirect
       filehandle notation.

           @files = glob("$dir/*.[ch]");
           @files = glob($files[$i]);

       If an angle-bracket-based globbing expression is used as the condition of a "while" or
       "for" loop, then it will be implicitly assigned to $_.  If either a globbing expression or
       an explicit assignment of a globbing expression to a scalar is used as a "while"/"for"
       condition, then the condition actually tests for definedness of the expression's value,
       not for its regular truth value.

   Constant Folding
       Like C, Perl does a certain amount of expression evaluation at compile time whenever it
       determines that all arguments to an operator are static and have no side effects.  In
       particular, string concatenation happens at compile time between literals that don't do
       variable substitution.  Backslash interpolation also happens at compile time.  You can say

             'Now is the time for all'
           . "\n"
           .  'good men to come to.'

       and this all reduces to one string internally.  Likewise, if you say

           foreach $file (@filenames) {
               if (-s $file > 5 + 100 * 2**16) {  }
           }

       the compiler precomputes the number which that expression represents so that the
       interpreter won't have to.

   No-ops
       Perl doesn't officially have a no-op operator, but the bare constants 0 and 1 are special-
       cased not to produce a warning in void context, so you can for example safely do

           1 while foo();

   Bitwise String Operators
       Bitstrings of any size may be manipulated by the bitwise operators ("~ | & ^").

       If the operands to a binary bitwise op are strings of different sizes, | and ^ ops act as
       though the shorter operand had additional zero bits on the right, while the & op acts as
       though the longer operand were truncated to the length of the shorter.  The granularity
       for such extension or truncation is one or more bytes.

           # ASCII-based examples
           print "j p \n" ^ " a h";            # prints "JAPH\n"
           print "JA" | "  ph\n";              # prints "japh\n"
           print "japh\nJunk" & '_____';       # prints "JAPH\n";
           print 'p N$' ^ " E<H\n";            # prints "Perl\n";

       If you are intending to manipulate bitstrings, be certain that you're supplying
       bitstrings: If an operand is a number, that will imply a numeric bitwise operation.  You
       may explicitly show which type of operation you intend by using "" or "0+", as in the
       examples below.

           $foo =  150  |  105;        # yields 255  (0x96 | 0x69 is 0xFF)
           $foo = '150' |  105;        # yields 255
           $foo =  150  | '105';       # yields 255
           $foo = '150' | '105';       # yields string '155' (under ASCII)

           $baz = 0+$foo & 0+$bar;     # both ops explicitly numeric
           $biz = "$foo" ^ "$bar";     # both ops explicitly stringy

       This somewhat unpredictable behavior can be avoided with the "bitwise" feature, new in
       Perl 5.22.  You can enable it via "use feature 'bitwise'" or "use v5.28".  Before Perl
       5.28, it used to emit a warning in the "experimental::bitwise" category.  Under this
       feature, the four standard bitwise operators ("~ | & ^") are always numeric.  Adding a dot
       after each operator ("~. |. &. ^.") forces it to treat its operands as strings:

           use feature "bitwise";
           $foo =  150  |  105;        # yields 255  (0x96 | 0x69 is 0xFF)
           $foo = '150' |  105;        # yields 255
           $foo =  150  | '105';       # yields 255
           $foo = '150' | '105';       # yields 255
           $foo =  150  |. 105;        # yields string '155'
           $foo = '150' |. 105;        # yields string '155'
           $foo =  150  |.'105';       # yields string '155'
           $foo = '150' |.'105';       # yields string '155'

           $baz = $foo &  $bar;        # both operands numeric
           $biz = $foo ^. $bar;        # both operands stringy

       The assignment variants of these operators ("&= |= ^= &.= |.= ^.=") behave likewise under
       the feature.

       It is a fatal error if an operand contains a character whose ordinal value is above 0xFF,
       and hence not expressible except in UTF-8.  The operation is performed on a non-UTF-8 copy
       for other operands encoded in UTF-8.  See "Byte and Character Semantics" in perlunicode.

       See "vec" in perlfunc for information on how to manipulate individual bits in a bit
       vector.

   Integer Arithmetic
       By default, Perl assumes that it must do most of its arithmetic in floating point.  But by
       saying

           use integer;

       you may tell the compiler to use integer operations (see integer for a detailed
       explanation) from here to the end of the enclosing BLOCK.  An inner BLOCK may countermand
       this by saying

           no integer;

       which lasts until the end of that BLOCK.  Note that this doesn't mean everything is an
       integer, merely that Perl will use integer operations for arithmetic, comparison, and
       bitwise operators.  For example, even under "use integer", if you take the sqrt(2), you'll
       still get 1.4142135623731 or so.

       Used on numbers, the bitwise operators ("&" "|" "^" "~" "<<" ">>") always produce integral
       results.  (But see also "Bitwise String Operators".)  However, "use integer" still has
       meaning for them.  By default, their results are interpreted as unsigned integers, but if
       "use integer" is in effect, their results are interpreted as signed integers.  For
       example, "~0" usually evaluates to a large integral value.  However, "use integer; ~0" is
       "-1" on two's-complement machines.

   Floating-point Arithmetic
       While "use integer" provides integer-only arithmetic, there is no analogous mechanism to
       provide automatic rounding or truncation to a certain number of decimal places.  For
       rounding to a certain number of digits, "sprintf()" or "printf()" is usually the easiest
       route.  See perlfaq4.

       Floating-point numbers are only approximations to what a mathematician would call real
       numbers.  There are infinitely more reals than floats, so some corners must be cut.  For
       example:

           printf "%.20g\n", 123456789123456789;
           #        produces 123456789123456784

       Testing for exact floating-point equality or inequality is not a good idea.  Here's a
       (relatively expensive) work-around to compare whether two floating-point numbers are equal
       to a particular number of decimal places.  See Knuth, volume II, for a more robust
       treatment of this topic.

           sub fp_equal {
               my ($X, $Y, $POINTS) = @_;
               my ($tX, $tY);
               $tX = sprintf("%.${POINTS}g", $X);
               $tY = sprintf("%.${POINTS}g", $Y);
               return $tX eq $tY;
           }

       The POSIX module (part of the standard perl distribution) implements "ceil()", "floor()",
       and other mathematical and trigonometric functions.  The "Math::Complex" module (part of
       the standard perl distribution) defines mathematical functions that work on both the reals
       and the imaginary numbers.  "Math::Complex" is not as efficient as POSIX, but POSIX can't
       work with complex numbers.

       Rounding in financial applications can have serious implications, and the rounding method
       used should be specified precisely.  In these cases, it probably pays not to trust
       whichever system rounding is being used by Perl, but to instead implement the rounding
       function you need yourself.

   Bigger Numbers
       The standard "Math::BigInt", "Math::BigRat", and "Math::BigFloat" modules, along with the
       "bignum", "bigint", and "bigrat" pragmas, provide variable-precision arithmetic and
       overloaded operators, although they're currently pretty slow.  At the cost of some space
       and considerable speed, they avoid the normal pitfalls associated with limited-precision
       representations.

               use 5.010;
               use bigint;  # easy interface to Math::BigInt
               $x = 123456789123456789;
               say $x * $x;
           +15241578780673678515622620750190521

       Or with rationals:

               use 5.010;
               use bigrat;
               $x = 3/22;
               $y = 4/6;
               say "x/y is ", $x/$y;
               say "x*y is ", $x*$y;
               x/y is 9/44
               x*y is 1/11

       Several modules let you calculate with unlimited or fixed precision (bound only by memory
       and CPU time).  There are also some non-standard modules that provide faster
       implementations via external C libraries.

       Here is a short, but incomplete summary:

         Math::String           treat string sequences like numbers
         Math::FixedPrecision   calculate with a fixed precision
         Math::Currency         for currency calculations
         Bit::Vector            manipulate bit vectors fast (uses C)
         Math::BigIntFast       Bit::Vector wrapper for big numbers
         Math::Pari             provides access to the Pari C library
         Math::Cephes           uses the external Cephes C library (no
                                big numbers)
         Math::Cephes::Fraction fractions via the Cephes library
         Math::GMP              another one using an external C library
         Math::GMPz             an alternative interface to libgmp's big ints
         Math::GMPq             an interface to libgmp's fraction numbers
         Math::GMPf             an interface to libgmp's floating point numbers

       Choose wisely.