Provided by: prusa-slicer_2.5.2+dfsg-1_amd64 bug

NAME

       prusa-slicer - PrusaSlicer prusa-gcodeviewer - Prusa GCode Viewera

SYNOPSIS

       prusa-slicer [ ACTIONS ] [ TRANSFORM ] [ OPTIONS ] [ file.stl ... ]

DESCRIPTION

       PrusaSlicer based on Slic3r (with GUI support) https://github.com/prusa3d/PrusaSlicer

OPTIONS

       Common  options are listed here. See SLA OPTIONS and FFF OPTIONS for printer-type-specific
       options.

   Actions:
       --export-3mf
              Export the model(s) as 3MF.

       --export-amf
              Export the model(s) as AMF.

       --export-gcode, --gcode, -g
              Slice the model and export toolpaths as G-code.

       --export-obj
              Export the model(s) as OBJ.

       --export-sla, --sla Slice the model and export SLA printing layers as PNG.

       --export-stl
              Export the model(s) as STL.

       --help, -h
              Show this help.

       --help-fff
              Show the full list of print/G-code configuration options.

       --help-sla
              Show the full list of SLA print configuration options.

       --info Write information about the model to the console.

       --save ABCD
              Save configuration to the specified file.

       --slice, -s
              Slice the model as FFF or SLA based on the printer_technology configuration value.

   Transform options:
       --align-xy X,Y
              Align the model to the given point.

       --center X,Y
              Center the print around the given center.

       --cut N
              Cut model at the given Z.

       --dont-arrange
              Do not rearrange the given  models  before  merging  and  keep  their  original  XY
              coordinates.

       --duplicate N
              Multiply copies by this factor.

       --duplicate-grid X,Y
              Multiply copies by creating a grid.

       --merge, -m
              Arrange the supplied models in a plate and merge them in a single model in order to
              perform actions once.

       --repair
              Try to repair any non-manifold meshes (this option is implicitly added whenever  we
              need to slice the model to perform the requested action).

       --rotate N
              Rotation angle around the Z axis in degrees.

       --rotate-x N
              Rotation angle around the X axis in degrees.

       --rotate-y N
              Rotation angle around the Y axis in degrees.

       --scale N
              Scaling factor or percentage.

       --scale-to-fit X,Y,Z
              Scale to fit the given volume.

       --split
              Detect  unconnected  parts  in  the  given  model(s)  and  split them into separate
              objects.

   Other options:
       --datadir ABCD
              Load and store settings at the given directory.  This  is  useful  for  maintaining
              different profiles or including configurations from a network storage.

       --ignore-nonexistent-config
              Do not fail if a file supplied to --load does not exist.

       --load ABCD
              Load  configuration  from the specified file. It can be used more than once to load
              options from multiple files.

       --loglevel N
              Messages with severity lower or eqal to the loglevel will be printed out.  0:trace,
              1:debug, 2:info, 3:warning, 4:error, 5:fatal

       --output ABCD, -o ABCD
              The  file  where  the output will be written (if not specified, it will be based on
              the input file).

       Run --help-fff / --help-sla to see the full listing of print options.

   SLA Misc options:
       --absolute-correction N
              Will inflate or deflate the sliced  2D  polygons  according  to  the  sign  of  the
              correction. (default: 0)

       --area-fill N
              The percentage of the bed area. If the print area exceeds the specified value, then
              a slow tilt will be used, otherwise - a fast tilt (%, default: 50)

       --bed-custom-model ABCD

       --bed-custom-texture ABCD

       --bed-shape
              (default: 0x0,200x0,200x200,0x200)

       --display-height N
              Height of the display (default: 68)

       --display-mirror-x
              Enable horizontal mirroring of output images

       --display-mirror-y
              Enable vertical mirroring of output images

       --display-orientation
              Set the actual LCD display orientation inside the SLA printer. Portrait  mode  will
              flip  the meaning of display width and height parameters and the output images will
              be rotated by 90 degrees. (landscape, portrait; default: portrait)

       --display-pixels-x N
              Number of pixels in X (default: 2560)

       --display-pixels-y N
              Number of pixels in Y (default: 1440)

       --display-width N
              Width of the display (default: 120)

       --exposure-time N
              Exposure time (s, default: 10)

       --faded-layers N
              Number of the layers needed for the exposure time fade from initial  exposure  time
              to the exposure time (default: 10)

       --fast-tilt-time N
              Time of the fast tilt (s, default: 5)

       --gamma-correction N
              This  will apply a gamma correction to the rasterized 2D polygons. A gamma value of
              zero means thresholding with the threshold in the middle. This behaviour eliminates
              antialiasing without losing holes in polygons. (default: 1)

       --initial-exposure-time N
              Initial exposure time (s, default: 15)

       --initial-layer-height N
              Initial layer height (mm, default: 0.3)

       --material-correction N
              Correction for expansion (default: 1,1)

       --material-notes ABCD
              You can put your notes regarding the SLA print material here.

       --max-exposure-time N
              Maximum exposure time (s, default: 100)

       --max-initial-exposure-time N
              Maximum initial exposure time (s, default: 150)

       --max-print-height N
              Set this to the maximum height that can be reached by your extruder while printing.
              (mm, default: 200)

       --min-exposure-time N
              Minimum exposure time (s, default: 0)

       --min-initial-exposure-time N
              Minimum initial exposure time (s, default: 0)

       --print-host ABCD
              Slic3r can upload G-code files to a printer host. This  field  should  contain  the
              hostname, IP address or URL of the printer host instance.

       --printer-technology
              Printer technology (FFF, SLA; default: FFF)

       --printhost-apikey ABCD
              Slic3r can upload G-code files to a printer host. This field should contain the API
              Key or the password required for authentication.

       --printhost-cafile ABCD
              Custom CA certificate file can be specified for  HTTPS  OctoPrint  connections,  in
              crt/pem format. If left blank, the default OS CA certificate repository is used.

       --relative-correction N
              Printer scaling correction (default: 1,1)

       --slow-tilt-time N
              Time of the slow tilt (s, default: 8)

       --support-pillar-connection-mode
              Controls  the  bridge  type  between two neighboring pillars. Can be zig-zag, cross
              (double zig-zag) or dynamic which will automatically switch between the  first  two
              depending  on  the  distance  of the two pillars. (zigzag, cross, dynamic; default:
              dynamic)

       --thumbnails
              (default: )

   Advanced:
       --slice-closing-radius N
              Cracks smaller than 2x gap closing radius are being filled during the triangle mesh
              slicing. The gap closing operation may reduce the final print resolution, therefore
              it is advisable to keep the value reasonably low. (mm, default: 0.049)

   Layers and Perimeters:
       --layer-height N
              This setting controls the height (and thus the total number) of the  slices/layers.
              Thinner  layers  give  better  accuracy but take more time to print.  (mm, default:
              0.3)

   Pad:
       --pad-around-object Create pad around object and ignore the support elevation

       --pad-enable
              Add a pad underneath the supported model

       --pad-max-merge-distance N
              Some objects can get along with a few smaller pads instead of  a  single  big  one.
              This parameter defines how far the center of two smaller pads should be. If theyare
              closer, they will get merged into one pad. (mm, default: 50)

       --pad-object-connector-penetration N
              How much should the tiny connectors penetrate into the model  body.  (mm,  default:
              0.3)

       --pad-object-connector-stride N
              Distance  between  two  connector sticks which connect the object and the generated
              pad. (mm, default: 10)

       --pad-object-connector-width N
              Width of the connector sticks which connect the object and the generated pad.  (mm,
              default: 0.5)

       --pad-object-gap N
              The  gap  between  the  object bottom and the generated pad in zero elevation mode.
              (mm, default: 1)

       --pad-wall-height N Defines the pad cavity depth. Set to zero to disable  the  cavity.  Be
       careful when
              enabling  this feature, as some resins may produce an extreme suction effect inside
              the cavity, which makes peeling  the  print  off  the  vat  foil  difficult.   (mm,
              default: 0)

       --pad-wall-slope N
              The  slope  of  the  pad  wall relative to the bed plane. 90 degrees means straight
              walls. (??, default: 45)

       --pad-wall-thickness N
              The thickness of the pad and its optional cavity walls. (mm, default: 2)

   Supports:
       --support-base-diameter N
              Diameter in mm of the pillar base (mm, default: 4)

       --support-base-height N
              The height of the pillar base cone (mm, default: 1)

       --support-base-safety-distance N
              The minimum distance of the pillar base from the model in mm. Makes sense  in  zero
              elevation  mode  where  a  gap  according to this parameter is inserted between the
              model and the pad. (mm, default: 1)

       --support-buildplate-only
              Only create support if it lies on a build plate. Don't create support on a print.

       --support-critical-angle N
              The default angle for connecting support sticks and junctions. (??, default: 45)

       --support-head-front-diameter N
              Diameter of the pointing side of the head (mm, default: 0.4)

       --support-head-penetration N
              How much the pinhead has to penetrate the model surface (mm, default: 0.2)

       --support-head-width N
              Width from the back sphere center to the front sphere center (mm, default: 1)

       --support-max-bridge-length N
              The max length of a bridge (mm, default: 15)

       --support-max-pillar-link-distance N
              The max distance of two pillars to get linked with each other. A  zero  value  will
              prohibit pillar cascading. (mm, default: 10)

       --support-object-elevation N
              How  much  the supports should lift up the supported object. If "Pad around object"
              is enabled, this value is ignored. (mm, default: 5)

       --support-pillar-diameter N
              Diameter in mm of the support pillars (mm, default: 1)

       --support-pillar-widening-factor N
              Merging bridges or pillars into another pillars can increase the radius. Zero means
              no increase, one means full increase. (default: 0)

       --support-points-density-relative N
              This is a relative measure of support points density. (%, default: 100)

       --support-points-minimal-distance N
              No support points will be placed closer than this threshold. (mm, default: 1)

       --supports-enable
              Generate supports for the models

FFF OPTIONS

   Misc options:
       --avoid-crossing-perimeters
              Optimize  travel  moves  in  order  to minimize the crossing of perimeters. This is
              mostly useful with Bowden extruders which suffer from oozing.  This  feature  slows
              down both the print and the G-code generation.

       --bed-custom-model ABCD

       --bed-custom-texture ABCD

       --bed-shape
              (default: 0x0,200x0,200x200,0x200)

       --bed-temperature  N  Bed  temperature for layers after the first one. Set this to zero to
       disable bed
              temperature control commands in the output. (default: 0)

       --before-layer-gcode ABCD
              This custom code is inserted at every layer change, right before the Z move.   Note
              that  you  can  use  placeholder  variables  for  all  Slic3r  settings  as well as
              [layer_num] and [layer_z].

       --between-objects-gcode ABCD
              This code is inserted between objects when using sequential  printing.  By  default
              extruder  and  bed  temperature  are reset using non-wait command; however if M104,
              M109, M140 or  M190  are  detected  in  this  custom  code,  Slic3r  will  not  add
              temperature  commands.  Note  that you can use placeholder variables for all Slic3r
              settings, so you can put a "M109 S[first_layer_temperature]" command  wherever  you
              want.

       --bridge-acceleration N
              This  is  the  acceleration  your printer will use for bridges. Set zero to disable
              acceleration control for bridges. (mm/s??, default: 0)

       --bridge-fan-speed N
              This fan speed is enforced during all bridges and overhangs. (%, default: 100)

       --brim-width N
              Horizontal width of the brim that will be printed around each object on  the  first
              layer. (mm, default: 0)

       --clip-multipart-objects
              When  printing  multi-material  objects, this settings will make Slic3r to clip the
              overlapping object parts one by the other (2nd part will be clipped by the 1st, 3rd
              part will be clipped by the 1st and 2nd etc).

       --colorprint-heights N
              Heights at which a filament change is to occur. (default: )

       --complete-objects
              When  printing  multiple  objects or copies, this feature will complete each object
              before moving onto next one (and starting it from its bottom layer).  This  feature
              is  useful  to  avoid the risk of ruined prints. Slic3r should warn and prevent you
              from extruder collisions, but beware.

       --cooling
              This flag enables the automatic cooling logic that  adjusts  print  speed  and  fan
              speed according to layer printing time. (default: 1)

       --cooling-tube-length N
              Length  of  the  cooling  tube  to  limit  space  for cooling moves inside it. (mm,
              default: 5)

       --cooling-tube-retraction N
              Distance of the center-point of the  cooling  tube  from  the  extruder  tip.  (mm,
              default: 91.5)

       --default-acceleration N
              This  is  the  acceleration  your  printer will be reset to after the role-specific
              acceleration values are used (perimeter/infill).  Set  zero  to  prevent  resetting
              acceleration at all. (mm/s??, default: 0)

       --deretract-speed N The speed for loading of a filament into extruder after retraction (it
       only
              applies to the extruder motor). If left to zero,  the  retraction  speed  is  used.
              (mm/s, default: 0)

       --disable-fan-first-layers N
              You can set this to a positive value to disable fan at all during the first layers,
              so that it does not make adhesion worse. (layers, default: 3)

       --duplicate-distance N
              Distance used for the auto-arrange feature of the plater. (mm, default: 6)

       --end-filament-gcode ABCD
              This end procedure is inserted at the end of the output file,  before  the  printer
              end  gcode  (and  before any toolchange from this filament in case of multimaterial
              printers). Note  that  you  can  use  placeholder  variables  for  all  PrusaSlicer
              settings. If you have multiple extruders, the gcode is processed in extruder order.
              (default: "; Filament-specific end gcode \n;END gcode for filament\n")

       --end-gcode ABCD
              This end procedure is inserted at the end of the output file. Note that you can use
              placeholder  variables  for  all PrusaSlicer settings. (default: M104 S0 ; turn off
              temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n)

       --extra-loading-move N
              When set to zero, the distance the filament is moved from parking  position  during
              load  is  exactly the same as it was moved back during unload. When positive, it is
              loaded further, if negative, the loading  move  is  shorter  than  unloading.  (mm,
              default: -2)

       --extruder-clearance-height N
              Set  this  to  the  vertical  distance  between your nozzle tip and (usually) the X
              carriage rods. In other words, this is the height of the clearance cylinder  around
              your  extruder,  and  it  represents the maximum depth the extruder can peek before
              colliding with other printed objects. (mm, default: 20)

       --extruder-clearance-radius N
              Set this to the clearance radius around your  extruder.  If  the  extruder  is  not
              centered,  choose  the  largest value for safety. This setting is used to check for
              collisions and to display the graphical preview in the plater. (mm, default: 20)

       --extruder-colour ABCD
              This is only used in the Slic3r interface as a visual help. (default: "")

       --extruder-offset
              If your firmware doesn't handle the extruder displacement you need  the  G-code  to
              take  it  into  account.  This  option  lets  you  specify the displacement of each
              extruder with respect to the first one. It expects positive coordinates (they  will
              be subtracted from the XY coordinate). (mm, default: 0x0)

       --extrusion-axis ABCD
              Use  this  option  to  set  the  axis  letter associated to your printer's extruder
              (usually E but some printers use A). (default: E)

       --extrusion-multiplier N
              This factor changes the amount of flow proportionally. You may need to  tweak  this
              setting to get nice surface finish and correct single wall widths. Usual values are
              between 0.9 and 1.1. If you think you need to  change  this  more,  check  filament
              diameter and your firmware E steps. (default: 1)

       --fan-always-on
              If this is enabled, fan will never be disabled and will be kept running at least at
              its minimum speed. Useful for PLA, harmful for ABS. (default: 0)

       --fan-below-layer-time N
              If layer print time is estimated below this number of seconds, fan will be  enabled
              and  its  speed will be calculated by interpolating the minimum and maximum speeds.
              (approximate seconds, default: 60)

       --filament-colour ABCD
              This is only used in the Slic3r interface as a visual help. (default: #29B2B2)

       --filament-cooling-final-speed N
              Cooling moves are gradually accelerating towards this speed. (mm/s, default: 3.4)

       --filament-cooling-initial-speed N
              Cooling moves are gradually accelerating beginning at this speed.  (mm/s,  default:
              2.2)

       --filament-cooling-moves N
              Filament  is  cooled  by  being  moved back and forth in the cooling tubes. Specify
              desired number of these moves. (default: 4)

       --filament-cost N
              Enter your filament cost per kg here. This is  only  for  statistical  information.
              (money/kg, default: 0)

       --filament-density N
              Enter  your  filament  density  here.  This  is only for statistical information. A
              decent way is to weigh a known length of filament and  compute  the  ratio  of  the
              length  to volume. Better is to calculate the volume directly through displacement.
              (g/cm??, default: 0)

       --filament-deretract-speed N
              The speed for loading of a filament into extruder after retraction (it only applies
              to  the  extruder  motor).  If  left to zero, the retraction speed is used.  (mm/s,
              default: 0)

       --filament-diameter N
              Enter your filament diameter here. Good precision is required, so use a caliper and
              do  multiple  measurements  along  the  filament,  then  compute  the average. (mm,
              default: 1.75)

       --filament-load-time N
              Time for the printer firmware (or the Multi  Material  Unit  2.0)  to  load  a  new
              filament  during  a  tool change (when executing the T code). This time is added to
              the total print time by the G-code time estimator. (s, default: 0)

       --filament-loading-speed N
              Speed used for loading the filament on the wipe tower. (mm/s, default: 28)

       --filament-loading-speed-start N
              Speed used at the very beginning of loading phase. (mm/s, default: 3)

       --filament-max-volumetric-speed N
              Maximum volumetric speed allowed for this filament. Limits the  maximum  volumetric
              speed of a print to the minimum of print and filament volumetric speed. Set to zero
              for no limit. (mm??/s, default: 0)

       --filament-minimal-purge-on-wipe-tower N
              After a tool change, the exact position of the newly  loaded  filament  inside  the
              nozzle  may  not  be  known,  and  the  filament pressure is likely not yet stable.
              Before purging the print head into an infill or a sacrificial object,  Slic3r  will
              always  prime  this  amount  of  material into the wipe tower to produce successive
              infill or sacrificial object extrusions reliably. (mm??, default: 15)

       --filament-notes ABCD
              You can put your notes regarding the filament here. (default: "")

       --filament-ramming-parameters ABCD
              This string is edited by RammingDialog and contains  ramming  specific  parameters.
              (default: "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95
              7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6")

       --filament-retract-before-travel N
              Retraction is not triggered when travel moves are shorter than  this  length.  (mm,
              default: 2)

       --filament-retract-before-wipe
              With  bowden  extruders,  it  may be wise to do some amount of quick retract before
              doing the wipe movement. (%, default: 0%)

       --filament-retract-layer-change
              This flag enforces a retraction whenever a Z move is done. (default: 0)

       --filament-retract-length N
              When retraction is triggered, filament is pulled back by the specified amount  (the
              length  is  measured  on raw filament, before it enters the extruder). (mm (zero to
              disable), default: 2)

       --filament-retract-lift N
              If you set this to a positive value, Z is quickly raised every time a retraction is
              triggered.  When  using multiple extruders, only the setting for the first extruder
              will be considered. (mm, default: 0)

       --filament-retract-lift-above N
              If you set this to a positive  value,  Z  lift  will  only  take  place  above  the
              specified  absolute  Z.  You  can  tune this setting for skipping lift on the first
              layers. (mm, default: 0)

       --filament-retract-lift-below N
              If you set this to a positive  value,  Z  lift  will  only  take  place  below  the
              specified  absolute  Z.  You  can  tune this setting for limiting lift to the first
              layers. (mm, default: 0)

       --filament-retract-restart-extra N
              When the retraction is compensated after the travel move, the  extruder  will  push
              this additional amount of filament. This setting is rarely needed. (mm, default: 0)

       --filament-retract-speed N
              The  speed for retractions (it only applies to the extruder motor). (mm/s, default:
              40)

       --filament-soluble
              Soluble material is most likely used for a soluble support. (default: 0)

       --filament-toolchange-delay N
              Time to wait after the filament is unloaded. May help to get  reliable  toolchanges
              with  flexible  materials that may need more time to shrink to original dimensions.
              (s, default: 0)

       --filament-type ABCD
              The filament material type for use in custom G-codes. (PLA, ABS, PET,  FLEX,  HIPS,
              EDGE,  NGEN,  NYLON,  PVA, PC, PP, PEI, PEEK, PEKK, POM, PSU, PVDF, SCAFF; default:
              PLA)

       --filament-unload-time N
              Time for the printer firmware (or the Multi Material Unit 2.0) to unload a filament
              during  a  tool change (when executing the T code). This time is added to the total
              print time by the G-code time estimator. (s, default: 0)

       --filament-unloading-speed N
              Speed used for unloading the filament on the wipe tower (does  not  affect  initial
              part of unloading just after ramming). (mm/s, default: 90)

       --filament-unloading-speed-start N
              Speed used for unloading the tip of the filament immediately after ramming.  (mm/s,
              default: 100)

       --filament-wipe
              This flag will move the nozzle while retracting to minimize the  possible  blob  on
              leaky extruders. (default: 0)

       --first-layer-acceleration N
              This is the acceleration your printer will use for first layer. Set zero to disable
              acceleration control for first layer. (mm/s??, default: 0)

       --first-layer-bed-temperature N
              Heated build plate temperature for the first layer. Set this to zero to disable bed
              temperature control commands in the output. (default: 0)

       --first-layer-speed N
              If expressed as absolute value in mm/s, this speed will be applied to all the print
              moves of the first layer, regardless of their type. If expressed  as  a  percentage
              (for example: 40%) it will scale the default speeds. (mm/s or %, default: 30)

       --first-layer-temperature N
              Extruder  temperature  for first layer. If you want to control temperature manually
              during print, set this to zero to  disable  temperature  control  commands  in  the
              output file. (default: 200)

       --gcode-comments
              Enable  this  to  get  a  commented  G-code  file,  with  each  line explained by a
              descriptive text. If you print from SD card, the  additional  weight  of  the  file
              could make your firmware slow down.

       --gcode-flavor
              Some   G/M-code  commands,  including  temperature  control  and  others,  are  not
              universal. Set this option to your printer's firmware to get a  compatible  output.
              The  "No  extrusion" flavor prevents PrusaSlicer from exporting any extrusion value
              at all. (reprap, repetier, teacup, makerware, marlin, sailfish, mach3,  machinekit,
              smoothie, no-extrusion; default: reprap)

       --gcode-label-objects
              Enable  this  to add comments into the G-Code labeling print moves with what object
              they belong to, which is  useful  for  the  Octoprint  CancelObject  plugin.   This
              settings  is NOT compatible with Single Extruder Multi Material setup and Wipe into
              Object / Wipe into Infill.

       --high-current-on-filament-swap
              It may be beneficial to increase the extruder motor  current  during  the  filament
              exchange  sequence to allow for rapid ramming feed rates and to overcome resistance
              when loading a filament with an ugly shaped tip.

       --host-type
              Slic3r can upload G-code files to a printer host. This field must contain the  kind
              of the host. (octoprint, duet; default: octoprint)

       --infill-acceleration N
              This  is  the  acceleration  your  printer will use for infill. Set zero to disable
              acceleration control for infill. (mm/s??, default: 0)

       --infill-first
              This option will switch the print order of perimeters and infill, making the latter
              first.

       --after-layer-gcode ABCD, --layer-gcode ABCD
              This  custom  code  is  inserted  at every layer change, right after the Z move and
              before the extruder moves  to  the  first  layer  point.  Note  that  you  can  use
              placeholder variables for all Slic3r settings as well as [layer_num] and [layer_z].

       --max-fan-speed N
              This setting represents the maximum speed of your fan. (%, default: 100)

       --max-layer-height N
              This  is  the  highest  printable  layer  height for this extruder, used to cap the
              variable layer height and support layer height. Maximum recommended layer height is
              75% of the extrusion width to achieve reasonable inter-layer adhesion. If set to 0,
              layer height is limited to 75% of the nozzle diameter. (mm, default: 0)

       --max-print-height N
              Set this to the maximum height that can be reached by your extruder while printing.
              (mm, default: 200)

       --max-print-speed  N  When setting other speed settings to 0 Slic3r will autocalculate the
       optimal
              speed in order to keep constant extruder pressure.  This  experimental  setting  is
              used to set the highest print speed you want to allow. (mm/s, default: 80)

       --max-volumetric-speed N
              This experimental setting is used to set the maximum volumetric speed your extruder
              supports. (mm??/s, default: 0)

       --min-fan-speed N
              This setting represents the minimum PWM your fan needs to work. (%, default: 35)

       --min-layer-height N
              This is the lowest  printable  layer  height  for  this  extruder  and  limits  the
              resolution  for  variable  layer height. Typical values are between 0.05 mm and 0.1
              mm. (mm, default: 0.07)

       --min-print-speed N Slic3r will not scale speed down below this speed. (mm/s, default: 10)

       --min-skirt-length N
              Generate no less than the number of skirt loops required to consume  the  specified
              amount  of  filament on the bottom layer. For multi-extruder machines, this minimum
              applies to each extruder. (mm, default: 0)

       --notes ABCD
              You can put here your personal notes. This text will be added to the G-code  header
              comments.

       --nozzle-diameter  N  This is the diameter of your extruder nozzle (for example: 0.5, 0.35
       etc.) (mm,
              default: 0.4)

       --only-retract-when-crossing-perimeters
              Disables retraction when  the  travel  path  does  not  exceed  the  upper  layer's
              perimeters (and thus any ooze will be probably invisible).

       --ooze-prevention
              This  option will drop the temperature of the inactive extruders to prevent oozing.
              It will enable a tall skirt automatically and move  extruders  outside  such  skirt
              when changing temperatures.

       --output-filename-format ABCD
              You  can  use  all  configuration  options  as  variables inside this template. For
              example: [layer_height], [fill_density] etc. You can also use [timestamp],  [year],
              [month],   [day],   [hour],   [minute],   [second],   [version],  [input_filename],
              [input_filename_base]. (default: [input_filename_base].gcode)

       --parking-pos-retraction N
              Distance of the extruder tip from the position where the filament  is  parked  when
              unloaded. This should match the value in printer firmware. (mm, default: 92)

       --perimeter-acceleration N
              This  is  the  acceleration your printer will use for perimeters. A high value like
              9000 usually gives good results if your hardware is up to  the  job.  Set  zero  to
              disable acceleration control for perimeters. (mm/s??, default: 0)

       --post-process  ABCD If you want to process the output G-code through custom scripts, just
       list their
              absolute paths here. Separate multiple scripts with a semicolon.  Scripts  will  be
              passed  the  absolute  path  to the G-code file as the first argument, and they can
              access the Slic3r config settings by reading environment variables. (default: )

       --print-host ABCD
              Slic3r can upload G-code files to a printer host. This  field  should  contain  the
              hostname, IP address or URL of the printer host instance.

       --printer-notes ABCD
              You can put your notes regarding the printer here.

       --printer-technology
              Printer technology (FFF, SLA; default: FFF)

       --printhost-apikey ABCD
              Slic3r can upload G-code files to a printer host. This field should contain the API
              Key or the password required for authentication.

       --printhost-cafile ABCD
              Custom CA certificate file can be specified for  HTTPS  OctoPrint  connections,  in
              crt/pem format. If left blank, the default OS CA certificate repository is used.

       --remaining-times
              Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute intervals into
              the G-code to let the firmware show accurate remaining time. As  of  now  only  the
              Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 firmware supports M73 Qxx Sxx
              for the silent mode.

       --resolution N
              Minimum detail resolution, used to simplify the input  file  for  speeding  up  the
              slicing  job  and  reducing  memory  usage. High-resolution models often carry more
              detail than printers can render. Set to zero to disable any simplification and  use
              full resolution from input. (mm, default: 0)

       --retract-before-travel N
              Retraction  is  not  triggered when travel moves are shorter than this length. (mm,
              default: 2)

       --retract-before-wipe
              With bowden extruders, it may be wise to do some amount  of  quick  retract  before
              doing the wipe movement. (%, default: 0%)

       --retract-layer-change
              This flag enforces a retraction whenever a Z move is done. (default: 0)

       --retract-length N
              When  retraction is triggered, filament is pulled back by the specified amount (the
              length is measured on raw filament, before it enters the extruder).  (mm  (zero  to
              disable), default: 2)

       --retract-length-toolchange N
              When  retraction  is triggered before changing tool, filament is pulled back by the
              specified amount (the length is measured on raw  filament,  before  it  enters  the
              extruder). (mm (zero to disable), default: 10)

       --retract-lift N
              If you set this to a positive value, Z is quickly raised every time a retraction is
              triggered. When using multiple extruders, only the setting for the  first  extruder
              will be considered. (mm, default: 0)

       --retract-lift-above N
              If  you  set  this  to  a  positive  value,  Z  lift will only take place above the
              specified absolute Z. You can tune this setting for  skipping  lift  on  the  first
              layers. (mm, default: 0)

       --retract-lift-below N
              If  you  set  this  to  a  positive  value,  Z  lift will only take place below the
              specified absolute Z. You can tune this setting for  limiting  lift  to  the  first
              layers. (mm, default: 0)

       --retract-restart-extra N
              When  the  retraction  is compensated after the travel move, the extruder will push
              this additional amount of filament. This setting is rarely needed. (mm, default: 0)

       --retract-restart-extra-toolchange N
              When the retraction is compensated after changing tool, the extruder will push this
              additional amount of filament. (mm, default: 0)

       --retract-speed N
              The  speed for retractions (it only applies to the extruder motor). (mm/s, default:
              40)

       --serial-port ABCD
              USB/serial port for printer connection.

       --serial-speed N
              Speed (baud) of USB/serial port for printer connection. (115200,  250000;  default:
              250000)

       --silent-mode
              The firmware supports stealth mode

       --single-extruder-multi-material
              The printer multiplexes filaments into a single hot end.

       --single-extruder-multi-material-priming
              If  enabled,  all  printing extruders will be primed at the front edge of the print
              bed at the start of the print.

       --skirt-distance N
              Distance between skirt and object(s). Set this to zero to attach the skirt  to  the
              object(s) and get a brim for better adhesion. (mm, default: 6)

       --skirt-height N
              Height  of  skirt  expressed  in layers. Set this to a tall value to use skirt as a
              shield against drafts. (layers, default: 1)

       --skirts N
              Number of loops for the skirt. If the Minimum Extrusion Length option is  set,  the
              number  of loops might be greater than the one configured here. Set this to zero to
              disable skirt completely. (default: 1)

       --slowdown-below-layer-time N
              If layer print time is estimated below this number of seconds,  print  moves  speed
              will  be  scaled  down  to  extend  duration  to  this value. (approximate seconds,
              default: 5)

       --solid-layers N
              Number of solid layers to generate on top and bottom surfaces.

       --spiral-vase
              This feature will raise Z gradually while printing a single-walled object in  order
              to  remove any visible seam. This option requires a single perimeter, no infill, no
              top solid layers and no support material. You can still set any  number  of  bottom
              solid  layers as well as skirt/brim loops. It won't work when printing more than an
              object.

       --standby-temperature-delta N
              Temperature difference to be applied when an extruder  is  not  active.  Enables  a
              full-height  "sacrificial"  skirt  on  which  the  nozzles  are periodically wiped.
              (?????C, default: -5)

       --start-filament-gcode ABCD
              This start procedure is inserted at the beginning, after any  printer  start  gcode
              (and  after  any  toolchange  to this filament in case of multi-material printers).
              This is used to override settings for a specific filament. If  PrusaSlicer  detects
              M104,  M109, M140 or M190 in your custom codes, such commands will not be prepended
              automatically so you're free to customize the order of heating commands  and  other
              custom  actions.  Note  that  you can use placeholder variables for all PrusaSlicer
              settings, so you can put a "M109 S[first_layer_temperature]" command  wherever  you
              want.  If  you  have  multiple extruders, the gcode is processed in extruder order.
              (default: "; Filament gcode\n")

       --start-gcode ABCD
              This start procedure is inserted at the beginning, after bed has reached the target
              temperature  and  extruder  just  started heating, and before extruder has finished
              heating. If PrusaSlicer detects M104 or M190 in your custom  codes,  such  commands
              will  not  be  prepended  automatically  so  you're  free to customize the order of
              heating commands and other custom  actions.  Note  that  you  can  use  placeholder
              variables    for   all   PrusaSlicer   settings,   so   you   can   put   a   "M109
              S[first_layer_temperature]" command wherever you want. (default:  G28  ;  home  all
              axes\nG1 Z5 F5000 ; lift nozzle\n)

       --temperature N
              Extruder  temperature  for  layers after the first one. Set this to zero to disable
              temperature control commands in the output. (default: 200)

       --threads N
              Threads are used to parallelize  long-running  tasks.  Optimal  threads  number  is
              slightly above the number of available cores/processors. (default: 4)

       --thumbnails
              (default: )

       --toolchange-gcode ABCD
              This custom code is inserted before every toolchange. Placeholder variables for all
              PrusaSlicer settings as well as  {previous_extruder}  and  {next_extruder}  can  be
              used.  When  a  tool-changing  command  which  changes  to  the correct extruder is
              included (such as T{next_extruder}), PrusaSlicer will emit no other  such  command.
              It  is  therefore  possible  to  script  custom behaviour both before and after the
              toolchange.

       --travel-speed N
              Speed for travel moves (jumps between distant extrusion  points).  (mm/s,  default:
              130)

       --use-firmware-retraction
              This experimental setting uses G10 and G11 commands to have the firmware handle the
              retraction. This is only supported in recent Marlin.

       --use-relative-e-distances
              If your firmware requires  relative  E  values,  check  this,  otherwise  leave  it
              unchecked. Most firmwares use absolute values.

       --use-volumetric-e
              This experimental setting uses outputs the E values in cubic millimeters instead of
              linear millimeters. If your firmware doesn't already know filament diameter(s), you
              can  put  commands  like  'M200  D[filament_diameter_0] T0' in your start G-code in
              order to turn volumetric mode on and use the filament diameter  associated  to  the
              filament selected in Slic3r. This is only supported in recent Marlin.

       --variable-layer-height
              Some  printers  or  printer  setups  may have difficulties printing with a variable
              layer height. Enabled by default.

       --wipe This flag will move the nozzle while retracting to minimize the  possible  blob  on
              leaky extruders. (default: 0)

       --wipe-tower
              Multi  material  printers  may  need  to  prime or purge extruders on tool changes.
              Extrude the excess material into the wipe tower.

       --wipe-tower-bridging N
              Maximal distance between supports on sparse infill sections. (mm, default: 10)

       --wipe-tower-rotation-angle N
              Wipe tower rotation angle with respect to x-axis. (??, default: 0)

       --wipe-tower-width N
              Width of a wipe tower (mm, default: 60)

       --wipe-tower-x N
              X coordinate of the left front corner of a wipe tower (mm, default: 180)

       --wipe-tower-y N
              Y coordinate of the left front corner of a wipe tower (mm, default: 140)

       --wiping-volumes-extruders N
              This vector saves required volumes to change from/to each tool  used  on  the  wipe
              tower.  These  values  are  used  to  simplify creation of the full purging volumes
              below. (default: 70,70,70,70,70,70,70,70,70,70)

       --wiping-volumes-matrix N
              This matrix describes volumes (in cubic  milimetres)  required  to  purge  the  new
              filament on the wipe tower for any given pair of tools.
              (default:
              0,140,140,140,140,140,0,140,140,140,140,140,0,140,140,140,140,140,0,140,140,140,140,140,0)

       --z-offset N
              This  value  will be added (or subtracted) from all the Z coordinates in the output
              G-code. It is used to compensate for bad Z endstop position: for example,  if  your
              endstop  zero  actually leaves the nozzle 0.3mm far from the print bed, set this to
              -0.3 (or fix your endstop). (mm, default: 0)

SLA OPTIONS

   Misc options:
       --absolute-correction N
              Will inflate or deflate the sliced  2D  polygons  according  to  the  sign  of  the
              correction. (default: 0)

       --area-fill N
              The percentage of the bed area. If the print area exceeds the specified value, then
              a slow tilt will be used, otherwise - a fast tilt (%, default: 50)

       --bed-custom-model ABCD

       --bed-custom-texture ABCD

       --bed-shape
              (default: 0x0,200x0,200x200,0x200)

       --display-height N
              Height of the display (default: 68)

       --display-mirror-x
              Enable horizontal mirroring of output images

       --display-mirror-y
              Enable vertical mirroring of output images

       --display-orientation
              Set the actual LCD display orientation inside the SLA printer. Portrait  mode  will
              flip  the meaning of display width and height parameters and the output images will
              be rotated by 90 degrees. (landscape, portrait; default: portrait)

       --display-pixels-x N
              Number of pixels in X (default: 2560)

       --display-pixels-y N
              Number of pixels in Y (default: 1440)

       --display-width N
              Width of the display (default: 120)

       --exposure-time N
              Exposure time (s, default: 10)

       --faded-layers N
              Number of the layers needed for the exposure time fade from initial  exposure  time
              to the exposure time (default: 10)

       --fast-tilt-time N
              Time of the fast tilt (s, default: 5)

       --gamma-correction N
              This  will apply a gamma correction to the rasterized 2D polygons. A gamma value of
              zero means thresholding with the threshold in the middle. This behaviour eliminates
              antialiasing without losing holes in polygons. (default: 1)

       --initial-exposure-time N
              Initial exposure time (s, default: 15)

       --initial-layer-height N
              Initial layer height (mm, default: 0.3)

       --material-correction N
              Correction for expansion (default: 1,1)

       --material-notes ABCD
              You can put your notes regarding the SLA print material here.

       --max-exposure-time N
              Maximum exposure time (s, default: 100)

       --max-initial-exposure-time N
              Maximum initial exposure time (s, default: 150)

       --max-print-height N
              Set this to the maximum height that can be reached by your extruder while printing.
              (mm, default: 200)

       --min-exposure-time N
              Minimum exposure time (s, default: 0)

       --min-initial-exposure-time N
              Minimum initial exposure time (s, default: 0)

       --print-host ABCD
              Slic3r can upload G-code files to a printer host. This  field  should  contain  the
              hostname, IP address or URL of the printer host instance.

       --printer-technology
              Printer technology (FFF, SLA; default: FFF)

       --printhost-apikey ABCD
              Slic3r can upload G-code files to a printer host. This field should contain the API
              Key or the password required for authentication.

       --printhost-cafile ABCD
              Custom CA certificate file can be specified for  HTTPS  OctoPrint  connections,  in
              crt/pem format. If left blank, the default OS CA certificate repository is used.

       --relative-correction N
              Printer scaling correction (default: 1,1)

       --slow-tilt-time N
              Time of the slow tilt (s, default: 8)

       --support-pillar-connection-mode
              Controls  the  bridge  type  between two neighboring pillars. Can be zig-zag, cross
              (double zig-zag) or dynamic which will automatically switch between the  first  two
              depending  on  the  distance  of the two pillars. (zigzag, cross, dynamic; default:
              dynamic)

       --thumbnails
              (default: )

   Advanced:
       --slice-closing-radius N
              Cracks smaller than 2x gap closing radius are being filled during the triangle mesh
              slicing. The gap closing operation may reduce the final print resolution, therefore
              it is advisable to keep the value reasonably low. (mm, default: 0.049)

   Layers and Perimeters:
       --layer-height N
              This setting controls the height (and thus the total number) of the  slices/layers.
              Thinner  layers  give  better  accuracy but take more time to print.  (mm, default:
              0.3)

   Pad:
       --pad-around-object Create pad around object and ignore the support elevation

       --pad-enable
              Add a pad underneath the supported model

       --pad-max-merge-distance N
              Some objects can get along with a few smaller pads instead of  a  single  big  one.
              This parameter defines how far the center of two smaller pads should be. If theyare
              closer, they will get merged into one pad. (mm, default: 50)

       --pad-object-connector-penetration N
              How much should the tiny connectors penetrate into the model  body.  (mm,  default:
              0.3)

       --pad-object-connector-stride N
              Distance  between  two  connector sticks which connect the object and the generated
              pad. (mm, default: 10)

       --pad-object-connector-width N
              Width of the connector sticks which connect the object and the generated pad.  (mm,
              default: 0.5)

       --pad-object-gap N
              The  gap  between  the  object bottom and the generated pad in zero elevation mode.
              (mm, default: 1)

       --pad-wall-height N Defines the pad cavity depth. Set to zero to disable  the  cavity.  Be
       careful when
              enabling  this feature, as some resins may produce an extreme suction effect inside
              the cavity, which makes peeling  the  print  off  the  vat  foil  difficult.   (mm,
              default: 0)

       --pad-wall-slope N
              The  slope  of  the  pad  wall relative to the bed plane. 90 degrees means straight
              walls. (??, default: 45)

       --pad-wall-thickness N
              The thickness of the pad and its optional cavity walls. (mm, default: 2)

   Supports:
       --support-base-diameter N
              Diameter in mm of the pillar base (mm, default: 4)

       --support-base-height N
              The height of the pillar base cone (mm, default: 1)

       --support-base-safety-distance N
              The minimum distance of the pillar base from the model in mm. Makes sense  in  zero
              elevation  mode  where  a  gap  according to this parameter is inserted between the
              model and the pad. (mm, default: 1)

       --support-buildplate-only
              Only create support if it lies on a build plate. Don't create support on a print.

       --support-critical-angle N
              The default angle for connecting support sticks and junctions. (??, default: 45)

       --support-head-front-diameter N
              Diameter of the pointing side of the head (mm, default: 0.4)

       --support-head-penetration N
              How much the pinhead has to penetrate the model surface (mm, default: 0.2)

       --support-head-width N
              Width from the back sphere center to the front sphere center (mm, default: 1)

       --support-max-bridge-length N
              The max length of a bridge (mm, default: 15)

       --support-max-pillar-link-distance N
              The max distance of two pillars to get linked with each other. A  zero  value  will
              prohibit pillar cascading. (mm, default: 10)

       --support-object-elevation N
              How  much  the supports should lift up the supported object. If "Pad around object"
              is enabled, this value is ignored. (mm, default: 5)

       --support-pillar-diameter N
              Diameter in mm of the support pillars (mm, default: 1)

       --support-pillar-widening-factor N
              Merging bridges or pillars into another pillars can increase the radius. Zero means
              no increase, one means full increase. (default: 0)

       --support-points-density-relative N
              This is a relative measure of support points density. (%, default: 100)

       --support-points-minimal-distance N
              No support points will be placed closer than this threshold. (mm, default: 1)

       --supports-enable
              Generate supports for the models