Provided by: guestfs-tools_1.50.1-4ubuntu1_amd64 bug

NAME

       virt-alignment-scan - Check alignment of virtual machine partitions

SYNOPSIS

        virt-alignment-scan [--options] -d domname

        virt-alignment-scan [--options] -a disk.img [-a disk.img ...]

        virt-alignment-scan [--options]

DESCRIPTION

       When older operating systems install themselves, the partitioning tools place partitions
       at a sector misaligned with the underlying storage (commonly the first partition starts on
       sector 63).  Misaligned partitions can result in an operating system issuing more I/O than
       should be necessary.

       The virt-alignment-scan tool checks the alignment of partitions in virtual machines and
       disk images and warns you if there are alignment problems.

       Currently there is no virt tool for fixing alignment problems.  You can only reinstall the
       guest operating system.  The following NetApp document summarises the problem and possible
       solutions: http://media.netapp.com/documents/tr-3747.pdf

OUTPUT

       To run this tool on a disk image directly, use the -a option:

        $ virt-alignment-scan -a winxp.img
        /dev/sda1        32256          512    bad (alignment < 4K)

        $ virt-alignment-scan -a fedora16.img
        /dev/sda1      1048576         1024K   ok
        /dev/sda2      2097152         2048K   ok
        /dev/sda3    526385152         2048K   ok

       To run the tool on a guest known to libvirt, use the -d option and possibly the -c option:

        # virt-alignment-scan -d RHEL5
        /dev/sda1        32256          512    bad (alignment < 4K)
        /dev/sda2    106928640          512    bad (alignment < 4K)

        $ virt-alignment-scan -c qemu:///system -d Win7TwoDisks
        /dev/sda1      1048576         1024K   ok
        /dev/sda2    105906176         1024K   ok
        /dev/sdb1        65536           64K   ok

       Run virt-alignment-scan without any -a or -d options to scan all libvirt domains.

        # virt-alignment-scan
        F16x64:/dev/sda1      1048576         1024K   ok
        F16x64:/dev/sda2      2097152         2048K   ok
        F16x64:/dev/sda3    526385152         2048K   ok

       The output consists of 4 or more whitespace-separated columns.  Only the first 4 columns
       are significant if you want to parse this from a program.  The columns are:

       col 1
           The device and partition name (eg. /dev/sda1 meaning the first partition on the first
           block device).

           When listing all libvirt domains (no -a or -d option given) this column is prefixed by
           the libvirt name or UUID (if --uuid is given).  eg: "WinXP:/dev/sda1"

       col 2
           the start of the partition in bytes

       col 3
           the alignment in bytes or Kbytes (eg. 512 or "4K")

       col 4
           "ok" if the alignment is best for performance, or "bad" if the alignment can cause
           performance problems

       cols 5+
           optional free-text explanation.

       The exit code from the program changes depending on whether poorly aligned partitions were
       found.  See "EXIT STATUS" below.

       If you just want the exit code with no output, use the -q option.

OPTIONS

       --help
           Display brief help.

       -a file
       --add file
           Add file which should be a disk image from a virtual machine.

           The format of the disk image is auto-detected.  To override this and force a
           particular format use the --format=.. option.

       -a URI
       --add URI
           Add a remote disk.  See "ADDING REMOTE STORAGE" in guestfish(1).

       --blocksize=512
       --blocksize=4096
       --blocksize
           This parameter sets the sector size of the disk image.  It affects all explicitly
           added subsequent disks after this parameter.  Using --blocksize with no argument
           switches the disk sector size to the default value which is usually 512 bytes.  See
           also "guestfs_add_drive_opts" in guestfs(3).

       -c URI
       --connect URI
           If using libvirt, connect to the given URI.  If omitted, then we connect to the
           default libvirt hypervisor.

           If you specify guest block devices directly (-a), then libvirt is not used at all.

       -d guest
       --domain guest
           Add all the disks from the named libvirt guest.  Domain UUIDs can be used instead of
           names.

       --format=raw|qcow2|..
       --format
           The default for the -a option is to auto-detect the format of the disk image.  Using
           this forces the disk format for -a options which follow on the command line.  Using
           --format with no argument switches back to auto-detection for subsequent -a options.

           For example:

            virt-alignment-scan --format=raw -a disk.img

           forces raw format (no auto-detection) for disk.img.

            virt-alignment-scan --format=raw -a disk.img --format -a another.img

           forces raw format (no auto-detection) for disk.img and reverts to auto-detection for
           another.img.

           If you have untrusted raw-format guest disk images, you should use this option to
           specify the disk format.  This avoids a possible security problem with malicious
           guests (CVE-2010-3851).

       -P nr_threads
           Since libguestfs 1.22, virt-alignment-scan is multithreaded and examines guests in
           parallel.  By default the number of threads to use is chosen based on the amount of
           free memory available at the time that virt-alignment-scan is started.  You can force
           virt-alignment-scan to use at most "nr_threads" by using the -P option.

           Note that -P 0 means to autodetect, and -P 1 means to use a single thread.

       -q
       --quiet
           Don’t produce any output.  Just set the exit code (see "EXIT STATUS" below).

       --uuid
           Print UUIDs instead of names.  This is useful for following a guest even when the
           guest is migrated or renamed, or when two guests happen to have the same name.

           This option only applies when listing all libvirt domains (when no -a or -d options
           are specified).

       -v
       --verbose
           Enable verbose messages for debugging.

       -V
       --version
           Display version number and exit.

       -x  Enable tracing of libguestfs API calls.

RECOMMENDED ALIGNMENT

       Operating systems older than Windows 2008 and Linux before ca.2010 place the first sector
       of the first partition at sector 63, with a 512 byte sector size.  This happens because of
       a historical accident.  Drives have to report a cylinder / head / sector (CHS) geometry to
       the BIOS.  The geometry is completely meaningless on modern drives, but it happens that
       the geometry reported always has 63 sectors per track.  The operating system therefore
       places the first partition at the start of the second "track", at sector 63.

       When the guest OS is virtualized, the host operating system and hypervisor may prefer
       accesses aligned to one of:

       •   512 bytes

           if the host OS uses local storage directly on hard drive partitions, and the hard
           drive has 512 byte physical sectors.

       •   4 Kbytes

           for local storage on new hard drives with 4Kbyte physical sectors; for file-backed
           storage on filesystems with 4Kbyte block size; or for some types of network-attached
           storage.

       •   64 Kbytes

           for high-end network-attached storage.  This is the optimal block size for some NetApp
           hardware.

       •   1 Mbyte

           see "1 MB PARTITION ALIGNMENT" below.

       Partitions which are not aligned correctly to the underlying storage cause extra I/O.  For
       example:

                              sect#63
                              ┌──────────────────────────┬ ─ ─ ─ ─
                              │         guest            │
                              │    filesystem block      │
         ─ ┬──────────────────┴──────┬───────────────────┴─────┬ ─ ─
           │  host block             │  host block             │
           │                         │                         │
         ─ ┴─────────────────────────┴─────────────────────────┴ ─ ─

       In this example, each time a 4K guest block is read, two blocks on the host must be
       accessed (so twice as much I/O is done).  When a 4K guest block is written, two host
       blocks must first be read, the old and new data combined, and the two blocks written back
       (4x I/O).

   LINUX HOST BLOCK AND I/O SIZE
       New versions of the Linux kernel expose the physical and logical block size, and minimum
       and recommended I/O size.

       For a typical consumer hard drive with 512 byte sectors:

        $ cat /sys/block/sda/queue/hw_sector_size
        512
        $ cat /sys/block/sda/queue/physical_block_size
        512
        $ cat /sys/block/sda/queue/logical_block_size
        512
        $ cat /sys/block/sda/queue/minimum_io_size
        512
        $ cat /sys/block/sda/queue/optimal_io_size
        0

       For a new consumer hard drive with 4Kbyte sectors:

        $ cat /sys/block/sda/queue/hw_sector_size
        4096
        $ cat /sys/block/sda/queue/physical_block_size
        4096
        $ cat /sys/block/sda/queue/logical_block_size
        4096
        $ cat /sys/block/sda/queue/minimum_io_size
        4096
        $ cat /sys/block/sda/queue/optimal_io_size
        0

       For a NetApp LUN:

        $ cat /sys/block/sdc/queue/logical_block_size
        512
        $ cat /sys/block/sdc/queue/physical_block_size
        512
        $ cat /sys/block/sdc/queue/minimum_io_size
        4096
        $ cat /sys/block/sdc/queue/optimal_io_size
        65536

       The NetApp allows 512 byte accesses (but they will be very inefficient), prefers a minimum
       4K I/O size, but the optimal I/O size is 64K.

       For detailed information about what these numbers mean, see
       http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Storage_Administration_Guide/newstorage-iolimits.html

       [Thanks to Matt Booth for providing 4K drive data.  Thanks to Mike Snitzer for providing
       NetApp data and additional information.]

   1 MB PARTITION ALIGNMENT
       Microsoft picked 1 MB as the default alignment for all partitions starting with Windows
       2008 Server, and Linux has followed this.

       Assuming 512 byte sectors in the guest, you will now see the first partition starting at
       sector 2048, and subsequent partitions (if any) will start at a multiple of 2048 sectors.

       1 MB alignment is compatible with all current alignment requirements (4K, 64K) and
       provides room for future growth in physical block sizes.

   SETTING ALIGNMENT
       virt-resize(1) can change the alignment of the partitions of some guests.  Currently it
       can fully align all the partitions of all Windows guests, and it will fix the bootloader
       where necessary.  For Linux guests, it can align the second and subsequent partitions, so
       the majority of OS accesses except at boot will be aligned.

       Another way to correct partition alignment problems is to reinstall your guest operating
       systems.  If you install operating systems from templates, ensure these have correct
       partition alignment too.

       For older versions of Windows, the following NetApp document contains useful information:
       http://media.netapp.com/documents/tr-3747.pdf

       For Red Hat Enterprise Linux ≤ 5, use a Kickstart script that contains an explicit %pre
       section that creates aligned partitions using parted(8).  Do not use the Kickstart "part"
       command.  The NetApp document above contains an example.

EXIT STATUS

       This program returns:

       •   0

           successful exit, all partitions are aligned ≥ 64K for best performance

       •   1

           an error scanning the disk image or guest

       •   2

           successful exit, some partitions have alignment < 64K which can result in poor
           performance on high end network storage

       •   3

           successful exit, some partitions have alignment < 4K which can result in poor
           performance on most hypervisors

SEE ALSO

       guestfs(3), guestfish(1), virt-filesystems(1), virt-rescue(1), virt-resize(1),
       http://libguestfs.org/.

AUTHOR

       Richard W.M. Jones http://people.redhat.com/~rjones/

COPYRIGHT

       Copyright (C) 2011 Red Hat Inc.

LICENSE

       This program is free software; you can redistribute it and/or modify it under the terms of
       the GNU General Public License as published by the Free Software Foundation; either
       version 2 of the License, or (at your option) any later version.

       This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
       without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
       See the GNU General Public License for more details.

       You should have received a copy of the GNU General Public License along with this program;
       if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
       Boston, MA 02110-1301 USA.

BUGS

       To get a list of bugs against libguestfs, use this link:
       https://bugzilla.redhat.com/buglist.cgi?component=libguestfs&product=Virtualization+Tools

       To report a new bug against libguestfs, use this link:
       https://bugzilla.redhat.com/enter_bug.cgi?component=libguestfs&product=Virtualization+Tools

       When reporting a bug, please supply:

       •   The version of libguestfs.

       •   Where you got libguestfs (eg. which Linux distro, compiled from source, etc)

       •   Describe the bug accurately and give a way to reproduce it.

       •   Run libguestfs-test-tool(1) and paste the complete, unedited output into the bug
           report.