Provided by: libfile-copy-recursive-perl_0.45-4_all bug

NAME

       File::Copy::Recursive - Perl extension for recursively copying files and directories

SYNOPSIS

         use File::Copy::Recursive qw(fcopy rcopy dircopy fmove rmove dirmove);

         fcopy($orig,$new[,$buf]) or die $!;
         rcopy($orig,$new[,$buf]) or die $!;
         dircopy($orig,$new[,$buf]) or die $!;

         fmove($orig,$new[,$buf]) or die $!;
         rmove($orig,$new[,$buf]) or die $!;
         dirmove($orig,$new[,$buf]) or die $!;

         rcopy_glob("orig/stuff-*", $trg [, $buf]) or die $!;
         rmove_glob("orig/stuff-*", $trg [,$buf]) or die $!;

DESCRIPTION

       This module copies and moves directories recursively (or single files, well... singley) to
       an optional depth and attempts to preserve each file or directory's mode.

EXPORT

       None by default. But you can export all the functions as in the example above and the
       path* functions if you wish.

   fcopy()
       This function uses File::Copy's copy() function to copy a file but not a directory. Any
       directories are recursively created if need be.  One difference to File::Copy::copy() is
       that fcopy attempts to preserve the mode (see Preserving Mode below) The optional $buf in
       the synopsis is the same as File::Copy::copy()'s 3rd argument.  This function returns the
       same as File::Copy::copy() in scalar context and 1,0,0 in list context to accomodate
       rcopy()'s list context on regular files. (See below for more info)

   dircopy()
       This function recursively traverses the $orig directory's structure and recursively copies
       it to the $new directory.  $new is created if necessary (multiple non existent directories
       is ok (i.e. foo/bar/baz). The script logically and portably creates all of them if
       necessary).  It attempts to preserve the mode (see Preserving Mode below) and by default
       it copies all the way down into the directory (see Managing Depth, below).  If a directory
       is not specified it croaks just like fcopy croaks if its not a file that is specified.

       This function returns true or false: for true in scalar context it returns the number of
       files and directories copied, whereas in list context it returns the number of files and
       directories, number of directories only, depth level traversed.

         my $num_of_files_and_dirs = dircopy($orig,$new);
         my($num_of_files_and_dirs,$num_of_dirs,$depth_traversed) = dircopy($orig,$new);

       Normally it stops and returns if a copy fails. To continue on regardless, set
       $File::Copy::Recursive::SkipFlop to true.

           local $File::Copy::Recursive::SkipFlop = 1;

       That way it will copy everythging it can in a directory and won't stop because of
       permissions, etc...

   rcopy()
       This function will allow you to specify a file *or* a directory. It calls fcopy() if you
       passed file and dircopy() if you passed a directory.  If you call rcopy() (or fcopy() for
       that matter) on a file in list context, the values will be 1,0,0 since no directories and
       no depth are used.  This is important because if it's a directory in list context and
       there is only the initial directory the return value is 1,1,1.

   rcopy_glob()
       This function lets you specify a pattern suitable for perl's File::Glob::bsd_glob() as the
       first argument. Subsequently each path returned by perl's File::Glob::bsd_glob() gets
       rcopy()ied.

       It returns and array whose items are array refs that contain the return value of each
       rcopy() call.

       It forces behavior as if $File::Copy::Recursive::CPRFComp is true.

   fmove()
       Copies the file then removes the original. You can manage the path the original file is in
       according to $RemvBase.

   dirmove()
       Uses dircopy() to copy the directory then removes the original. You can manage the path
       the original directory is in according to $RemvBase.

   rmove()
       Like rcopy() but calls fmove() or dirmove() instead.

   rmove_glob()
       Like rcopy_glob() but calls rmove() instead of rcopy()

       $RemvBase

       Default is false. When set to true the *move() functions will not only attempt to remove
       the original file or directory but will remove the given path it is in.

       So if you:

          rmove('foo/bar/baz', '/etc/');
          # "baz" is removed from foo/bar after it is successfully copied to /etc/

          local $File::Copy::Recursive::Remvbase = 1;
          rmove('foo/bar/baz','/etc/');
          # if baz is successfully copied to /etc/ :
          # first "baz" is removed from foo/bar
          # then "foo/bar is removed via pathrm()

       $ForcePth

       Default is false. When set to true it calls pathempty() before any directories are removed
       to empty the directory so it can be rmdir()'ed when $RemvBase is in effect.

   Creating and Removing Paths
       $NoFtlPth

       Default is false. If set to true  rmdir(), mkdir(), and pathempty() calls in pathrm() and
       pathmk() do not return() on failure.

       If its set to true they just silently go about their business regardless. This isn't a
       good idea but it's there if you want it.

       $DirPerms

       Mode to pass to any mkdir() calls. Defaults to 0777 as per umask()'s POD. Explicitly
       having this allows older perls to be able to use FCR and might add a bit of flexibility
       for you.

       Any value you set it to should be suitable for oct().

       Path functions

       These functions exist solely because they were necessary for the move and copy functions
       to have the features they do and not because they are of themselves the purpose of this
       module. That being said, here is how they work so you can understand how the copy and move
       functions work and use them by themselves if you wish.

       pathrm()

       Removes a given path recursively. It removes the *entire* path so be careful!!!

       Returns 2 if the given path is not a directory.

         File::Copy::Recursive::pathrm('foo/bar/baz') or die $!;
         # foo no longer exists

       Same as:

         rmdir 'foo/bar/baz' or die $!;
         rmdir 'foo/bar' or die $!;
         rmdir 'foo' or die $!;

       An optional second argument makes it call pathempty() before any rmdir()'s when set to
       true.

         File::Copy::Recursive::pathrm('foo/bar/baz', 1) or die $!;
         # foo no longer exists

       Same as:PFSCheck

         File::Copy::Recursive::pathempty('foo/bar/baz') or die $!;
         rmdir 'foo/bar/baz' or die $!;
         File::Copy::Recursive::pathempty('foo/bar/') or die $!;
         rmdir 'foo/bar' or die $!;
         File::Copy::Recursive::pathempty('foo/') or die $!;
         rmdir 'foo' or die $!;

       An optional third argument acts like $File::Copy::Recursive::NoFtlPth, again probably not
       a good idea.

       pathempty()

       Recursively removes the given directory's contents so it is empty. Returns 2 if the given
       argument is not a directory, 1 on successfully emptying the directory.

          File::Copy::Recursive::pathempty($pth) or die $!;
          # $pth is now an empty directory

       pathmk()

       Creates a given path recursively. Creates foo/bar/baz even if foo does not exist.

          File::Copy::Recursive::pathmk('foo/bar/baz') or die $!;

       An optional second argument if true acts just like $File::Copy::Recursive::NoFtlPth, which
       means you'd never get your die() if something went wrong. Again, probably a *bad* idea.

       pathrmdir()

       Same as rmdir() but it calls pathempty() first to recursively empty it first since rmdir
       can not remove a directory with contents.  Just removes the top directory the path given
       instead of the entire path like pathrm(). Returns 2 if the given argument does not exist
       (i.e. it's already gone). Returns false if it exists but is not a directory.

   Preserving Mode
       By default a quiet attempt is made to change the new file or directory to the mode of the
       old one.  To turn this behavior off set
         $File::Copy::Recursive::KeepMode to false;

   Managing Depth
       You can set the maximum depth a directory structure is recursed by setting:
         $File::Copy::Recursive::MaxDepth to a whole number greater than 0.

   SymLinks
       If your system supports symlinks then symlinks will be copied as symlinks instead of as
       the target file.  Perl's symlink() is used instead of File::Copy's copy().  You can
       customize this behavior by setting $File::Copy::Recursive::CopyLink to a true or false
       value.  It is already set to true or false depending on your system's support of symlinks
       so you can check it with an if statement to see how it will behave:

           if($File::Copy::Recursive::CopyLink) {
               print "Symlinks will be preserved\n";
           } else {
               print "Symlinks will not be preserved because your system does not support it\n";
           }

       If symlinks are being copied you can set $File::Copy::Recursive::BdTrgWrn to true to make
       it carp when it copies a link whose target does not exist. It's false by default.

           local $File::Copy::Recursive::BdTrgWrn  = 1;

   Removing existing target file or directory before copying.
       This can be done by setting $File::Copy::Recursive::RMTrgFil or
       $File::Copy::Recursive::RMTrgDir for file or directory behavior respectively.

       0 = off (This is the default)

       1 = carp() $! if removal fails

       2 = return if removal fails

           local $File::Copy::Recursive::RMTrgFil = 1;
           fcopy($orig, $target) or die $!;
           # if it fails it does warn() and keeps going

           local $File::Copy::Recursive::RMTrgDir = 2;
           dircopy($orig, $target) or die $!;
           # if it fails it does your "or die"

       This should be unnecessary most of the time but it's there if you need it :)

   Turning off stat() check
       By default the files or directories are checked to see if they are the same (i.e. linked,
       or two paths (absolute/relative or different relative paths) to the same file) by
       comparing the file's stat() info.  It's a very efficient check that croaks if they are and
       shouldn't be turned off but if you must for some weird reason just set
       $File::Copy::Recursive::PFSCheck to a false value. ("PFS" stands for "Physical File
       System")

   Emulating cp -rf dir1/ dir2/
       By default dircopy($dir1,$dir2) will put $dir1's contents right into $dir2 whether $dir2
       exists or not.

       You can make dircopy() emulate cp -rf by setting $File::Copy::Recursive::CPRFComp to true.

       NOTE: This only emulates -f in the sense that it does not prompt. It does not remove the
       target file or directory if it exists.  If you need to do that then use the variables
       $RMTrgFil and $RMTrgDir described in "Removing existing target file or directory before
       copying" above.

       That means that if $dir2 exists it puts the contents into $dir2/$dir1 instead of $dir2
       just like cp -rf.  If $dir2 does not exist then the contents go into $dir2 like normal
       (also like cp -rf).

       So assuming 'foo/file':

           dircopy('foo', 'bar') or die $!;
           # if bar does not exist the result is bar/file
           # if bar does exist the result is bar/file

           $File::Copy::Recursive::CPRFComp = 1;
           dircopy('foo', 'bar') or die $!;
           # if bar does not exist the result is bar/file
           # if bar does exist the result is bar/foo/file

       You can also specify a star for cp -rf glob type behavior:

           dircopy('foo/*', 'bar') or die $!;
           # if bar does not exist the result is bar/file
           # if bar does exist the result is bar/file

           $File::Copy::Recursive::CPRFComp = 1;
           dircopy('foo/*', 'bar') or die $!;
           # if bar does not exist the result is bar/file
           # if bar does exist the result is bar/file

       NOTE: The '*' is only like cp -rf foo/* and *DOES NOT EXPAND PARTIAL DIRECTORY NAMES LIKE
       YOUR SHELL DOES* (i.e. not like cp -rf fo* to copy foo/*).

   Allowing Copy Loops
       If you want to allow:

         cp -rf . foo/

       type behavior set $File::Copy::Recursive::CopyLoop to true.

       This is false by default so that a check is done to see if the source directory will
       contain the target directory and croaks to avoid this problem.

       If you ever find a situation where $CopyLoop = 1 is desirable let me know. (i.e. it's a
       bad bad idea but is there if you want it)

       (Note: On Windows this was necessary since it uses stat() to determine sameness and stat()
       is essentially useless for this on Windows.  The test is now simply skipped on Windows but
       I'd rather have an actual reliable check if anyone in Microsoft land would care to share)

SEE ALSO

       File::Copy File::Spec

TO DO

       I am currently working on and reviewing some other modules to use in the new interface so
       we can lose the horrid globals as well as some other undesirable traits and also more
       easily make available some long standing requests.

       Tests will be easier to do with the new interface and hence the testing focus will shift
       to the new interface and aim to be comprehensive.

       The old interface will work, it just won't be brought in until it is used, so it will add
       no overhead for users of the new interface.

       I'll add this after the latest version has been out for a while with no new features or
       issues found :)

AUTHOR

       Daniel Muey, <http://drmuey.com/cpan_contact.pl>

COPYRIGHT AND LICENSE

       Copyright 2004 by Daniel Muey

       This library is free software; you can redistribute it and/or modify it under the same
       terms as Perl itself.