Provided by: libjson-perl_4.10000-1_all bug

NAME

       JSON - JSON (JavaScript Object Notation) encoder/decoder

SYNOPSIS

        use JSON; # imports encode_json, decode_json, to_json and from_json.

        # simple and fast interfaces (expect/generate UTF-8)

        $utf8_encoded_json_text = encode_json $perl_hash_or_arrayref;
        $perl_hash_or_arrayref  = decode_json $utf8_encoded_json_text;

        # OO-interface

        $json = JSON->new->allow_nonref;

        $json_text   = $json->encode( $perl_scalar );
        $perl_scalar = $json->decode( $json_text );

        $pretty_printed = $json->pretty->encode( $perl_scalar ); # pretty-printing

DESCRIPTION

       This module is a thin wrapper for JSON::XS-compatible modules with a few additional
       features. All the backend modules convert a Perl data structure to a JSON text and vice
       versa. This module uses JSON::XS by default, and when JSON::XS is not available, falls
       back on JSON::PP, which is in the Perl core since 5.14. If JSON::PP is not available
       either, this module then falls back on JSON::backportPP (which is actually JSON::PP in a
       different .pm file) bundled in the same distribution as this module.  You can also
       explicitly specify to use Cpanel::JSON::XS, a fork of JSON::XS by Reini Urban.

       All these backend modules have slight incompatibilities between them, including extra
       features that other modules don't support, but as long as you use only common features
       (most important ones are described below), migration from backend to backend should be
       reasonably easy. For details, see each backend module you use.

CHOOSING BACKEND

       This module respects an environmental variable called "PERL_JSON_BACKEND" when it decides
       a backend module to use. If this environmental variable is not set, it tries to load
       JSON::XS, and if JSON::XS is not available, it falls back on JSON::PP, and then
       JSON::backportPP if JSON::PP is not available either.

       If you always don't want it to fall back on pure perl modules, set the variable like this
       ("export" may be "setenv", "set" and the likes, depending on your environment):

         > export PERL_JSON_BACKEND=JSON::XS

       If you prefer Cpanel::JSON::XS to JSON::XS, then:

         > export PERL_JSON_BACKEND=Cpanel::JSON::XS,JSON::XS,JSON::PP

       You may also want to set this variable at the top of your test files, in order not to be
       bothered with incompatibilities between backends (you need to wrap this in "BEGIN", and
       set before actually "use"-ing JSON module, as it decides its backend as soon as it's
       loaded):

         BEGIN { $ENV{PERL_JSON_BACKEND}='JSON::backportPP'; }
         use JSON;

USING OPTIONAL FEATURES

       There are a few options you can set when you "use" this module.  These historical options
       are only kept for backward compatibility, and should not be used in a new application.

       -support_by_pp
              BEGIN { $ENV{PERL_JSON_BACKEND} = 'JSON::XS' }

              use JSON -support_by_pp;

              my $json = JSON->new;
              # escape_slash is for JSON::PP only.
              $json->allow_nonref->escape_slash->encode("/");

           With this option, this module loads its pure perl backend along with its XS backend
           (if available), and lets the XS backend to watch if you set a flag only JSON::PP
           supports. When you do, the internal JSON::XS object is replaced with a newly created
           JSON::PP object with the setting copied from the XS object, so that you can use
           JSON::PP flags (and its slower "decode"/"encode" methods) from then on. In other
           words, this is not something that allows you to hook JSON::XS to change its behavior
           while keeping its speed. JSON::XS and JSON::PP objects are quite different (JSON::XS
           object is a blessed scalar reference, while JSON::PP object is a blessed hash
           reference), and can't share their internals.

           To avoid needless overhead (by copying settings), you are advised not to use this
           option and just to use JSON::PP explicitly when you need JSON::PP features.

       -convert_blessed_universally
              use JSON -convert_blessed_universally;

              my $json = JSON->new->allow_nonref->convert_blessed;
              my $object = bless {foo => 'bar'}, 'Foo';
              $json->encode($object); # => {"foo":"bar"}

           JSON::XS-compatible backend modules don't encode blessed objects by default (except
           for their boolean values, which are typically blessed JSON::PP::Boolean objects). If
           you need to encode a data structure that may contain objects, you usually need to look
           into the structure and replace objects with alternative non-blessed values, or enable
           "convert_blessed" and provide a "TO_JSON" method for each object's (base) class that
           may be found in the structure, in order to let the methods replace the objects with
           whatever scalar values the methods return.

           If you need to serialise data structures that may contain arbitrary objects, it's
           probably better to use other serialisers (such as Sereal or Storable for example), but
           if you do want to use this module for that purpose, "-convert_blessed_universally"
           option may help, which tweaks "encode" method of the backend to install
           "UNIVERSAL::TO_JSON" method (locally) before encoding, so that all the objects that
           don't have their own "TO_JSON" method can fall back on the method in the "UNIVERSAL"
           namespace. Note that you still need to enable "convert_blessed" flag to actually
           encode objects in a data structure, and "UNIVERSAL::TO_JSON" method installed by this
           option only converts blessed hash/array references into their unblessed clone
           (including private keys/values that are not supposed to be exposed). Other blessed
           references will be converted into null.

           This feature is experimental and may be removed in the future.

       -no_export
           When you don't want to import functional interfaces from a module, you usually supply
           "()" to its "use" statement.

               use JSON (); # no functional interfaces

           If you don't want to import functional interfaces, but you also want to use any of the
           above options, add "-no_export" to the option list.

              # no functional interfaces, while JSON::PP support is enabled.
              use JSON -support_by_pp, -no_export;

FUNCTIONAL INTERFACE

       This section is taken from JSON::XS. "encode_json" and "decode_json" are exported by
       default.

       This module also exports "to_json" and "from_json" for backward compatibility. These are
       slower, and may expect/generate different stuff from what "encode_json" and "decode_json"
       do, depending on their options. It's better just to use Object-Oriented interfaces than
       using these two functions.

   encode_json
           $json_text = encode_json $perl_scalar

       Converts the given Perl data structure to a UTF-8 encoded, binary string (that is, the
       string contains octets only). Croaks on error.

       This function call is functionally identical to:

           $json_text = JSON->new->utf8->encode($perl_scalar)

       Except being faster.

   decode_json
           $perl_scalar = decode_json $json_text

       The opposite of "encode_json": expects an UTF-8 (binary) string and tries to parse that as
       an UTF-8 encoded JSON text, returning the resulting reference. Croaks on error.

       This function call is functionally identical to:

           $perl_scalar = JSON->new->utf8->decode($json_text)

       Except being faster.

   to_json
          $json_text = to_json($perl_scalar[, $optional_hashref])

       Converts the given Perl data structure to a Unicode string by default.  Croaks on error.

       Basically, this function call is functionally identical to:

          $json_text = JSON->new->encode($perl_scalar)

       Except being slower.

       You can pass an optional hash reference to modify its behavior, but that may change what
       "to_json" expects/generates (see "ENCODING/CODESET FLAG NOTES" for details).

          $json_text = to_json($perl_scalar, {utf8 => 1, pretty => 1})
          # => JSON->new->utf8(1)->pretty(1)->encode($perl_scalar)

   from_json
          $perl_scalar = from_json($json_text[, $optional_hashref])

       The opposite of "to_json": expects a Unicode string and tries to parse it, returning the
       resulting reference. Croaks on error.

       Basically, this function call is functionally identical to:

           $perl_scalar = JSON->new->decode($json_text)

       You can pass an optional hash reference to modify its behavior, but that may change what
       "from_json" expects/generates (see "ENCODING/CODESET FLAG NOTES" for details).

           $perl_scalar = from_json($json_text, {utf8 => 1})
           # => JSON->new->utf8(1)->decode($json_text)

   JSON::is_bool
           $is_boolean = JSON::is_bool($scalar)

       Returns true if the passed scalar represents either JSON::true or JSON::false, two
       constants that act like 1 and 0 respectively and are also used to represent JSON "true"
       and "false" in Perl strings.

       See MAPPING, below, for more information on how JSON values are mapped to Perl.

COMMON OBJECT-ORIENTED INTERFACE

       This section is also taken from JSON::XS.

       The object oriented interface lets you configure your own encoding or decoding style,
       within the limits of supported formats.

   new
           $json = JSON->new

       Creates a new JSON::XS-compatible backend object that can be used to de/encode JSON
       strings. All boolean flags described below are by default disabled (with the exception of
       "allow_nonref", which defaults to enabled since version 4.0).

       The mutators for flags all return the backend object again and thus calls can be chained:

          my $json = JSON->new->utf8->space_after->encode({a => [1,2]})
          => {"a": [1, 2]}

   ascii
           $json = $json->ascii([$enable])

           $enabled = $json->get_ascii

       If $enable is true (or missing), then the "encode" method will not generate characters
       outside the code range 0..127 (which is ASCII). Any Unicode characters outside that range
       will be escaped using either a single \uXXXX (BMP characters) or a double \uHHHH\uLLLLL
       escape sequence, as per RFC4627. The resulting encoded JSON text can be treated as a
       native Unicode string, an ascii-encoded, latin1-encoded or UTF-8 encoded string, or any
       other superset of ASCII.

       If $enable is false, then the "encode" method will not escape Unicode characters unless
       required by the JSON syntax or other flags. This results in a faster and more compact
       format.

       See also the section ENCODING/CODESET FLAG NOTES later in this document.

       The main use for this flag is to produce JSON texts that can be transmitted over a 7-bit
       channel, as the encoded JSON texts will not contain any 8 bit characters.

         JSON->new->ascii(1)->encode([chr 0x10401])
         => ["\ud801\udc01"]

   latin1
           $json = $json->latin1([$enable])

           $enabled = $json->get_latin1

       If $enable is true (or missing), then the "encode" method will encode the resulting JSON
       text as latin1 (or iso-8859-1), escaping any characters outside the code range 0..255. The
       resulting string can be treated as a latin1-encoded JSON text or a native Unicode string.
       The "decode" method will not be affected in any way by this flag, as "decode" by default
       expects Unicode, which is a strict superset of latin1.

       If $enable is false, then the "encode" method will not escape Unicode characters unless
       required by the JSON syntax or other flags.

       See also the section ENCODING/CODESET FLAG NOTES later in this document.

       The main use for this flag is efficiently encoding binary data as JSON text, as most
       octets will not be escaped, resulting in a smaller encoded size. The disadvantage is that
       the resulting JSON text is encoded in latin1 (and must correctly be treated as such when
       storing and transferring), a rare encoding for JSON. It is therefore most useful when you
       want to store data structures known to contain binary data efficiently in files or
       databases, not when talking to other JSON encoders/decoders.

         JSON->new->latin1->encode (["\x{89}\x{abc}"]
         => ["\x{89}\\u0abc"]    # (perl syntax, U+abc escaped, U+89 not)

   utf8
           $json = $json->utf8([$enable])

           $enabled = $json->get_utf8

       If $enable is true (or missing), then the "encode" method will encode the JSON result into
       UTF-8, as required by many protocols, while the "decode" method expects to be handled an
       UTF-8-encoded string.  Please note that UTF-8-encoded strings do not contain any
       characters outside the range 0..255, they are thus useful for bytewise/binary I/O. In
       future versions, enabling this option might enable autodetection of the UTF-16 and UTF-32
       encoding families, as described in RFC4627.

       If $enable is false, then the "encode" method will return the JSON string as a (non-
       encoded) Unicode string, while "decode" expects thus a Unicode string.  Any decoding or
       encoding (e.g. to UTF-8 or UTF-16) needs to be done yourself, e.g. using the Encode
       module.

       See also the section ENCODING/CODESET FLAG NOTES later in this document.

       Example, output UTF-16BE-encoded JSON:

         use Encode;
         $jsontext = encode "UTF-16BE", JSON->new->encode ($object);

       Example, decode UTF-32LE-encoded JSON:

         use Encode;
         $object = JSON->new->decode (decode "UTF-32LE", $jsontext);

   pretty
           $json = $json->pretty([$enable])

       This enables (or disables) all of the "indent", "space_before" and "space_after" (and in
       the future possibly more) flags in one call to generate the most readable (or most
       compact) form possible.

   indent
           $json = $json->indent([$enable])

           $enabled = $json->get_indent

       If $enable is true (or missing), then the "encode" method will use a multiline format as
       output, putting every array member or object/hash key-value pair into its own line,
       indenting them properly.

       If $enable is false, no newlines or indenting will be produced, and the resulting JSON
       text is guaranteed not to contain any "newlines".

       This setting has no effect when decoding JSON texts.

   space_before
           $json = $json->space_before([$enable])

           $enabled = $json->get_space_before

       If $enable is true (or missing), then the "encode" method will add an extra optional space
       before the ":" separating keys from values in JSON objects.

       If $enable is false, then the "encode" method will not add any extra space at those
       places.

       This setting has no effect when decoding JSON texts. You will also most likely combine
       this setting with "space_after".

       Example, space_before enabled, space_after and indent disabled:

          {"key" :"value"}

   space_after
           $json = $json->space_after([$enable])

           $enabled = $json->get_space_after

       If $enable is true (or missing), then the "encode" method will add an extra optional space
       after the ":" separating keys from values in JSON objects and extra whitespace after the
       "," separating key-value pairs and array members.

       If $enable is false, then the "encode" method will not add any extra space at those
       places.

       This setting has no effect when decoding JSON texts.

       Example, space_before and indent disabled, space_after enabled:

          {"key": "value"}

   relaxed
           $json = $json->relaxed([$enable])

           $enabled = $json->get_relaxed

       If $enable is true (or missing), then "decode" will accept some extensions to normal JSON
       syntax (see below). "encode" will not be affected in any way. Be aware that this option
       makes you accept invalid JSON texts as if they were valid!. I suggest only to use this
       option to parse application-specific files written by humans (configuration files,
       resource files etc.)

       If $enable is false (the default), then "decode" will only accept valid JSON texts.

       Currently accepted extensions are:

       •   list items can have an end-comma

           JSON separates array elements and key-value pairs with commas. This can be annoying if
           you write JSON texts manually and want to be able to quickly append elements, so this
           extension accepts comma at the end of such items not just between them:

              [
                 1,
                 2, <- this comma not normally allowed
              ]
              {
                 "k1": "v1",
                 "k2": "v2", <- this comma not normally allowed
              }

       •   shell-style '#'-comments

           Whenever JSON allows whitespace, shell-style comments are additionally allowed. They
           are terminated by the first carriage-return or line-feed character, after which more
           white-space and comments are allowed.

             [
                1, # this comment not allowed in JSON
                   # neither this one...
             ]

   canonical
           $json = $json->canonical([$enable])

           $enabled = $json->get_canonical

       If $enable is true (or missing), then the "encode" method will output JSON objects by
       sorting their keys. This is adding a comparatively high overhead.

       If $enable is false, then the "encode" method will output key-value pairs in the order
       Perl stores them (which will likely change between runs of the same script, and can change
       even within the same run from 5.18 onwards).

       This option is useful if you want the same data structure to be encoded as the same JSON
       text (given the same overall settings). If it is disabled, the same hash might be encoded
       differently even if contains the same data, as key-value pairs have no inherent ordering
       in Perl.

       This setting has no effect when decoding JSON texts.

       This setting has currently no effect on tied hashes.

   allow_nonref
           $json = $json->allow_nonref([$enable])

           $enabled = $json->get_allow_nonref

       Unlike other boolean options, this option is enabled by default beginning with version
       4.0.

       If $enable is true (or missing), then the "encode" method can convert a non-reference into
       its corresponding string, number or null JSON value, which is an extension to RFC4627.
       Likewise, "decode" will accept those JSON values instead of croaking.

       If $enable is false, then the "encode" method will croak if it isn't passed an arrayref or
       hashref, as JSON texts must either be an object or array. Likewise, "decode" will croak if
       given something that is not a JSON object or array.

       Example, encode a Perl scalar as JSON value with enabled "allow_nonref", resulting in an
       invalid JSON text:

          JSON->new->allow_nonref->encode ("Hello, World!")
          => "Hello, World!"

   allow_unknown
           $json = $json->allow_unknown ([$enable])

           $enabled = $json->get_allow_unknown

       If $enable is true (or missing), then "encode" will not throw an exception when it
       encounters values it cannot represent in JSON (for example, filehandles) but instead will
       encode a JSON "null" value. Note that blessed objects are not included here and are
       handled separately by c<allow_blessed>.

       If $enable is false (the default), then "encode" will throw an exception when it
       encounters anything it cannot encode as JSON.

       This option does not affect "decode" in any way, and it is recommended to leave it off
       unless you know your communications partner.

   allow_blessed
           $json = $json->allow_blessed([$enable])

           $enabled = $json->get_allow_blessed

       See "OBJECT SERIALISATION" for details.

       If $enable is true (or missing), then the "encode" method will not barf when it encounters
       a blessed reference that it cannot convert otherwise. Instead, a JSON "null" value is
       encoded instead of the object.

       If $enable is false (the default), then "encode" will throw an exception when it
       encounters a blessed object that it cannot convert otherwise.

       This setting has no effect on "decode".

   convert_blessed
           $json = $json->convert_blessed([$enable])

           $enabled = $json->get_convert_blessed

       See "OBJECT SERIALISATION" for details.

       If $enable is true (or missing), then "encode", upon encountering a blessed object, will
       check for the availability of the "TO_JSON" method on the object's class. If found, it
       will be called in scalar context and the resulting scalar will be encoded instead of the
       object.

       The "TO_JSON" method may safely call die if it wants. If "TO_JSON" returns other blessed
       objects, those will be handled in the same way. "TO_JSON" must take care of not causing an
       endless recursion cycle (== crash) in this case. The name of "TO_JSON" was chosen because
       other methods called by the Perl core (== not by the user of the object) are usually in
       upper case letters and to avoid collisions with any "to_json" function or method.

       If $enable is false (the default), then "encode" will not consider this type of
       conversion.

       This setting has no effect on "decode".

   allow_tags (since version 3.0)
           $json = $json->allow_tags([$enable])

           $enabled = $json->get_allow_tags

       See "OBJECT SERIALISATION" for details.

       If $enable is true (or missing), then "encode", upon encountering a blessed object, will
       check for the availability of the "FREEZE" method on the object's class. If found, it will
       be used to serialise the object into a nonstandard tagged JSON value (that JSON decoders
       cannot decode).

       It also causes "decode" to parse such tagged JSON values and deserialise them via a call
       to the "THAW" method.

       If $enable is false (the default), then "encode" will not consider this type of
       conversion, and tagged JSON values will cause a parse error in "decode", as if tags were
       not part of the grammar.

   boolean_values (since version 4.0)
           $json->boolean_values([$false, $true])

           ($false,  $true) = $json->get_boolean_values

       By default, JSON booleans will be decoded as overloaded $JSON::false and $JSON::true
       objects.

       With this method you can specify your own boolean values for decoding - on decode, JSON
       "false" will be decoded as a copy of $false, and JSON "true" will be decoded as $true
       ("copy" here is the same thing as assigning a value to another variable, i.e. "$copy =
       $false").

       This is useful when you want to pass a decoded data structure directly to other
       serialisers like YAML, Data::MessagePack and so on.

       Note that this works only when you "decode". You can set incompatible boolean objects
       (like boolean), but when you "encode" a data structure with such boolean objects, you
       still need to enable "convert_blessed" (and add a "TO_JSON" method if necessary).

       Calling this method without any arguments will reset the booleans to their default values.

       "get_boolean_values" will return both $false and $true values, or the empty list when they
       are set to the default.

   filter_json_object
           $json = $json->filter_json_object([$coderef])

       When $coderef is specified, it will be called from "decode" each time it decodes a JSON
       object. The only argument is a reference to the newly-created hash. If the code references
       returns a single scalar (which need not be a reference), this value (or rather a copy of
       it) is inserted into the deserialised data structure. If it returns an empty list (NOTE:
       not "undef", which is a valid scalar), the original deserialised hash will be inserted.
       This setting can slow down decoding considerably.

       When $coderef is omitted or undefined, any existing callback will be removed and "decode"
       will not change the deserialised hash in any way.

       Example, convert all JSON objects into the integer 5:

          my $js = JSON->new->filter_json_object(sub { 5 });
          # returns [5]
          $js->decode('[{}]');
          # returns 5
          $js->decode('{"a":1, "b":2}');

   filter_json_single_key_object
           $json = $json->filter_json_single_key_object($key [=> $coderef])

       Works remotely similar to "filter_json_object", but is only called for JSON objects having
       a single key named $key.

       This $coderef is called before the one specified via "filter_json_object", if any. It gets
       passed the single value in the JSON object. If it returns a single value, it will be
       inserted into the data structure. If it returns nothing (not even "undef" but the empty
       list), the callback from "filter_json_object" will be called next, as if no single-key
       callback were specified.

       If $coderef is omitted or undefined, the corresponding callback will be disabled. There
       can only ever be one callback for a given key.

       As this callback gets called less often then the "filter_json_object" one, decoding speed
       will not usually suffer as much. Therefore, single-key objects make excellent targets to
       serialise Perl objects into, especially as single-key JSON objects are as close to the
       type-tagged value concept as JSON gets (it's basically an ID/VALUE tuple). Of course, JSON
       does not support this in any way, so you need to make sure your data never looks like a
       serialised Perl hash.

       Typical names for the single object key are "__class_whatever__", or
       "$__dollars_are_rarely_used__$" or "}ugly_brace_placement", or even things like
       "__class_md5sum(classname)__", to reduce the risk of clashing with real hashes.

       Example, decode JSON objects of the form "{ "__widget__" => <id> }" into the corresponding
       $WIDGET{<id>} object:

          # return whatever is in $WIDGET{5}:
          JSON
             ->new
             ->filter_json_single_key_object (__widget__ => sub {
                   $WIDGET{ $_[0] }
                })
             ->decode ('{"__widget__": 5')

          # this can be used with a TO_JSON method in some "widget" class
          # for serialisation to json:
          sub WidgetBase::TO_JSON {
             my ($self) = @_;

             unless ($self->{id}) {
                $self->{id} = ..get..some..id..;
                $WIDGET{$self->{id}} = $self;
             }

             { __widget__ => $self->{id} }
          }

   max_depth
           $json = $json->max_depth([$maximum_nesting_depth])

           $max_depth = $json->get_max_depth

       Sets the maximum nesting level (default 512) accepted while encoding or decoding. If a
       higher nesting level is detected in JSON text or a Perl data structure, then the encoder
       and decoder will stop and croak at that point.

       Nesting level is defined by number of hash- or arrayrefs that the encoder needs to
       traverse to reach a given point or the number of "{" or "[" characters without their
       matching closing parenthesis crossed to reach a given character in a string.

       Setting the maximum depth to one disallows any nesting, so that ensures that the object is
       only a single hash/object or array.

       If no argument is given, the highest possible setting will be used, which is rarely
       useful.

       See "SECURITY CONSIDERATIONS" in JSON::XS for more info on why this is useful.

   max_size
           $json = $json->max_size([$maximum_string_size])

           $max_size = $json->get_max_size

       Set the maximum length a JSON text may have (in bytes) where decoding is being attempted.
       The default is 0, meaning no limit. When "decode" is called on a string that is longer
       then this many bytes, it will not attempt to decode the string but throw an exception.
       This setting has no effect on "encode" (yet).

       If no argument is given, the limit check will be deactivated (same as when 0 is
       specified).

       See "SECURITY CONSIDERATIONS" in JSON::XS for more info on why this is useful.

   encode
           $json_text = $json->encode($perl_scalar)

       Converts the given Perl value or data structure to its JSON representation. Croaks on
       error.

   decode
           $perl_scalar = $json->decode($json_text)

       The opposite of "encode": expects a JSON text and tries to parse it, returning the
       resulting simple scalar or reference. Croaks on error.

   decode_prefix
           ($perl_scalar, $characters) = $json->decode_prefix($json_text)

       This works like the "decode" method, but instead of raising an exception when there is
       trailing garbage after the first JSON object, it will silently stop parsing there and
       return the number of characters consumed so far.

       This is useful if your JSON texts are not delimited by an outer protocol and you need to
       know where the JSON text ends.

          JSON->new->decode_prefix ("[1] the tail")
          => ([1], 3)

ADDITIONAL METHODS

       The following methods are for this module only.

   backend
           $backend = $json->backend

       Since 2.92, "backend" method returns an abstract backend module used currently, which
       should be JSON::Backend::XS (which inherits JSON::XS or Cpanel::JSON::XS), or
       JSON::Backend::PP (which inherits JSON::PP), not to monkey-patch the actual backend module
       globally.

       If you need to know what is used actually, use "isa", instead of string comparison.

   is_xs
           $boolean = $json->is_xs

       Returns true if the backend inherits JSON::XS or Cpanel::JSON::XS.

   is_pp
           $boolean = $json->is_pp

       Returns true if the backend inherits JSON::PP.

   property
           $settings = $json->property()

       Returns a reference to a hash that holds all the common flag settings.

           $json = $json->property('utf8' => 1)
           $value = $json->property('utf8') # 1

       You can use this to get/set a value of a particular flag.

   boolean
           $boolean_object = JSON->boolean($scalar)

       Returns $JSON::true if $scalar contains a true value, $JSON::false otherwise.  You can use
       this as a full-qualified function ("JSON::boolean($scalar)").

INCREMENTAL PARSING

       This section is also taken from JSON::XS.

       In some cases, there is the need for incremental parsing of JSON texts. While this module
       always has to keep both JSON text and resulting Perl data structure in memory at one time,
       it does allow you to parse a JSON stream incrementally. It does so by accumulating text
       until it has a full JSON object, which it then can decode. This process is similar to
       using "decode_prefix" to see if a full JSON object is available, but is much more
       efficient (and can be implemented with a minimum of method calls).

       This module will only attempt to parse the JSON text once it is sure it has enough text to
       get a decisive result, using a very simple but truly incremental parser. This means that
       it sometimes won't stop as early as the full parser, for example, it doesn't detect
       mismatched parentheses. The only thing it guarantees is that it starts decoding as soon as
       a syntactically valid JSON text has been seen. This means you need to set resource limits
       (e.g. "max_size") to ensure the parser will stop parsing in the presence if syntax errors.

       The following methods implement this incremental parser.

   incr_parse
           $json->incr_parse( [$string] ) # void context

           $obj_or_undef = $json->incr_parse( [$string] ) # scalar context

           @obj_or_empty = $json->incr_parse( [$string] ) # list context

       This is the central parsing function. It can both append new text and extract objects from
       the stream accumulated so far (both of these functions are optional).

       If $string is given, then this string is appended to the already existing JSON fragment
       stored in the $json object.

       After that, if the function is called in void context, it will simply return without doing
       anything further. This can be used to add more text in as many chunks as you want.

       If the method is called in scalar context, then it will try to extract exactly one JSON
       object. If that is successful, it will return this object, otherwise it will return
       "undef". If there is a parse error, this method will croak just as "decode" would do (one
       can then use "incr_skip" to skip the erroneous part). This is the most common way of using
       the method.

       And finally, in list context, it will try to extract as many objects from the stream as it
       can find and return them, or the empty list otherwise. For this to work, there must be no
       separators (other than whitespace) between the JSON objects or arrays, instead they must
       be concatenated back-to-back. If an error occurs, an exception will be raised as in the
       scalar context case. Note that in this case, any previously-parsed JSON texts will be
       lost.

       Example: Parse some JSON arrays/objects in a given string and return them.

           my @objs = JSON->new->incr_parse ("[5][7][1,2]");

   incr_text
           $lvalue_string = $json->incr_text

       This method returns the currently stored JSON fragment as an lvalue, that is, you can
       manipulate it. This only works when a preceding call to "incr_parse" in scalar context
       successfully returned an object. Under all other circumstances you must not call this
       function (I mean it.  although in simple tests it might actually work, it will fail under
       real world conditions). As a special exception, you can also call this method before
       having parsed anything.

       That means you can only use this function to look at or manipulate text before or after
       complete JSON objects, not while the parser is in the middle of parsing a JSON object.

       This function is useful in two cases: a) finding the trailing text after a JSON object or
       b) parsing multiple JSON objects separated by non-JSON text (such as commas).

   incr_skip
           $json->incr_skip

       This will reset the state of the incremental parser and will remove the parsed text from
       the input buffer so far. This is useful after "incr_parse" died, in which case the input
       buffer and incremental parser state is left unchanged, to skip the text parsed so far and
       to reset the parse state.

       The difference to "incr_reset" is that only text until the parse error occurred is
       removed.

   incr_reset
           $json->incr_reset

       This completely resets the incremental parser, that is, after this call, it will be as if
       the parser had never parsed anything.

       This is useful if you want to repeatedly parse JSON objects and want to ignore any
       trailing data, which means you have to reset the parser after each successful decode.

MAPPING

       Most of this section is also taken from JSON::XS.

       This section describes how the backend modules map Perl values to JSON values and vice
       versa. These mappings are designed to "do the right thing" in most circumstances
       automatically, preserving round-tripping characteristics (what you put in comes out as
       something equivalent).

       For the more enlightened: note that in the following descriptions, lowercase perl refers
       to the Perl interpreter, while uppercase Perl refers to the abstract Perl language itself.

   JSON -> PERL
       object
           A JSON object becomes a reference to a hash in Perl. No ordering of object keys is
           preserved (JSON does not preserver object key ordering itself).

       array
           A JSON array becomes a reference to an array in Perl.

       string
           A JSON string becomes a string scalar in Perl - Unicode codepoints in JSON are
           represented by the same codepoints in the Perl string, so no manual decoding is
           necessary.

       number
           A JSON number becomes either an integer, numeric (floating point) or string scalar in
           perl, depending on its range and any fractional parts. On the Perl level, there is no
           difference between those as Perl handles all the conversion details, but an integer
           may take slightly less memory and might represent more values exactly than floating
           point numbers.

           If the number consists of digits only, this module will try to represent it as an
           integer value. If that fails, it will try to represent it as a numeric (floating
           point) value if that is possible without loss of precision. Otherwise it will preserve
           the number as a string value (in which case you lose roundtripping ability, as the
           JSON number will be re-encoded to a JSON string).

           Numbers containing a fractional or exponential part will always be represented as
           numeric (floating point) values, possibly at a loss of precision (in which case you
           might lose perfect roundtripping ability, but the JSON number will still be re-encoded
           as a JSON number).

           Note that precision is not accuracy - binary floating point values cannot represent
           most decimal fractions exactly, and when converting from and to floating point, this
           module only guarantees precision up to but not including the least significant bit.

       true, false
           These JSON atoms become "JSON::true" and "JSON::false", respectively. They are
           overloaded to act almost exactly like the numbers 1 and 0. You can check whether a
           scalar is a JSON boolean by using the "JSON::is_bool" function.

       null
           A JSON null atom becomes "undef" in Perl.

       shell-style comments ("# text")
           As a nonstandard extension to the JSON syntax that is enabled by the "relaxed"
           setting, shell-style comments are allowed. They can start anywhere outside strings and
           go till the end of the line.

       tagged values ("(tag)value").
           Another nonstandard extension to the JSON syntax, enabled with the "allow_tags"
           setting, are tagged values. In this implementation, the tag must be a perl
           package/class name encoded as a JSON string, and the value must be a JSON array
           encoding optional constructor arguments.

           See "OBJECT SERIALISATION", below, for details.

   PERL -> JSON
       The mapping from Perl to JSON is slightly more difficult, as Perl is a truly typeless
       language, so we can only guess which JSON type is meant by a Perl value.

       hash references
           Perl hash references become JSON objects. As there is no inherent ordering in hash
           keys (or JSON objects), they will usually be encoded in a pseudo-random order. This
           module can optionally sort the hash keys (determined by the canonical flag), so the
           same data structure will serialise to the same JSON text (given same settings and
           version of the same backend), but this incurs a runtime overhead and is only rarely
           useful, e.g. when you want to compare some JSON text against another for equality.

       array references
           Perl array references become JSON arrays.

       other references
           Other unblessed references are generally not allowed and will cause an exception to be
           thrown, except for references to the integers 0 and 1, which get turned into "false"
           and "true" atoms in JSON. You can also use "JSON::false" and "JSON::true" to improve
           readability.

              encode_json [\0,JSON::true]      # yields [false,true]

       JSON::true, JSON::false, JSON::null
           These special values become JSON true and JSON false values, respectively. You can
           also use "\1" and "\0" directly if you want.

       blessed objects
           Blessed objects are not directly representable in JSON, but "JSON::XS" allows various
           ways of handling objects. See "OBJECT SERIALISATION", below, for details.

       simple scalars
           Simple Perl scalars (any scalar that is not a reference) are the most difficult
           objects to encode: this module will encode undefined scalars as JSON "null" values,
           scalars that have last been used in a string context before encoding as JSON strings,
           and anything else as number value:

              # dump as number
              encode_json [2]                      # yields [2]
              encode_json [-3.0e17]                # yields [-3e+17]
              my $value = 5; encode_json [$value]  # yields [5]

              # used as string, so dump as string
              print $value;
              encode_json [$value]                 # yields ["5"]

              # undef becomes null
              encode_json [undef]                  # yields [null]

           You can force the type to be a string by stringifying it:

              my $x = 3.1; # some variable containing a number
              "$x";        # stringified
              $x .= "";    # another, more awkward way to stringify
              print $x;    # perl does it for you, too, quite often

           You can force the type to be a number by numifying it:

              my $x = "3"; # some variable containing a string
              $x += 0;     # numify it, ensuring it will be dumped as a number
              $x *= 1;     # same thing, the choice is yours.

           You can not currently force the type in other, less obscure, ways. Tell me if you need
           this capability (but don't forget to explain why it's needed :).

           Since version 2.91_01, JSON::PP uses a different number detection logic that converts
           a scalar that is possible to turn into a number safely.  The new logic is slightly
           faster, and tends to help people who use older perl or who want to encode complicated
           data structure. However, this may results in a different JSON text from the one
           JSON::XS encodes (and thus may break tests that compare entire JSON texts). If you do
           need the previous behavior for better compatibility or for finer control, set
           PERL_JSON_PP_USE_B environmental variable to true before you "use" JSON.

           Note that numerical precision has the same meaning as under Perl (so binary to decimal
           conversion follows the same rules as in Perl, which can differ to other languages).
           Also, your perl interpreter might expose extensions to the floating point numbers of
           your platform, such as infinities or NaN's - these cannot be represented in JSON, and
           it is an error to pass those in.

           JSON.pm backend modules trust what you pass to "encode" method (or "encode_json"
           function) is a clean, validated data structure with values that can be represented as
           valid JSON values only, because it's not from an external data source (as opposed to
           JSON texts you pass to "decode" or "decode_json", which JSON backends consider tainted
           and don't trust). As JSON backends don't know exactly what you and consumers of your
           JSON texts want the unexpected values to be (you may want to convert them into null,
           or to stringify them with or without normalisation (string representation of
           infinities/NaN may vary depending on platforms), or to croak without conversion),
           you're advised to do what you and your consumers need before you encode, and also not
           to numify values that may start with values that look like a number (including
           infinities/NaN), without validating.

   OBJECT SERIALISATION
       As JSON cannot directly represent Perl objects, you have to choose between a pure JSON
       representation (without the ability to deserialise the object automatically again), and a
       nonstandard extension to the JSON syntax, tagged values.

       SERIALISATION

       What happens when this module encounters a Perl object depends on the "allow_blessed",
       "convert_blessed" and "allow_tags" settings, which are used in this order:

       1. "allow_tags" is enabled and the object has a "FREEZE" method.
           In this case, "JSON" creates a tagged JSON value, using a nonstandard extension to the
           JSON syntax.

           This works by invoking the "FREEZE" method on the object, with the first argument
           being the object to serialise, and the second argument being the constant string
           "JSON" to distinguish it from other serialisers.

           The "FREEZE" method can return any number of values (i.e. zero or more). These values
           and the package/classname of the object will then be encoded as a tagged JSON value in
           the following format:

              ("classname")[FREEZE return values...]

           e.g.:

              ("URI")["http://www.google.com/"]
              ("MyDate")[2013,10,29]
              ("ImageData::JPEG")["Z3...VlCg=="]

           For example, the hypothetical "My::Object" "FREEZE" method might use the objects
           "type" and "id" members to encode the object:

              sub My::Object::FREEZE {
                 my ($self, $serialiser) = @_;

                 ($self->{type}, $self->{id})
              }

       2. "convert_blessed" is enabled and the object has a "TO_JSON" method.
           In this case, the "TO_JSON" method of the object is invoked in scalar context. It must
           return a single scalar that can be directly encoded into JSON. This scalar replaces
           the object in the JSON text.

           For example, the following "TO_JSON" method will convert all URI objects to JSON
           strings when serialised. The fact that these values originally were URI objects is
           lost.

              sub URI::TO_JSON {
                 my ($uri) = @_;
                 $uri->as_string
              }

       3. "allow_blessed" is enabled.
           The object will be serialised as a JSON null value.

       4. none of the above
           If none of the settings are enabled or the respective methods are missing, this module
           throws an exception.

       DESERIALISATION

       For deserialisation there are only two cases to consider: either nonstandard tagging was
       used, in which case "allow_tags" decides, or objects cannot be automatically be
       deserialised, in which case you can use postprocessing or the "filter_json_object" or
       "filter_json_single_key_object" callbacks to get some real objects our of your JSON.

       This section only considers the tagged value case: a tagged JSON object is encountered
       during decoding and "allow_tags" is disabled, a parse error will result (as if tagged
       values were not part of the grammar).

       If "allow_tags" is enabled, this module will look up the "THAW" method of the
       package/classname used during serialisation (it will not attempt to load the package as a
       Perl module). If there is no such method, the decoding will fail with an error.

       Otherwise, the "THAW" method is invoked with the classname as first argument, the constant
       string "JSON" as second argument, and all the values from the JSON array (the values
       originally returned by the "FREEZE" method) as remaining arguments.

       The method must then return the object. While technically you can return any Perl scalar,
       you might have to enable the "allow_nonref" setting to make that work in all cases, so
       better return an actual blessed reference.

       As an example, let's implement a "THAW" function that regenerates the "My::Object" from
       the "FREEZE" example earlier:

          sub My::Object::THAW {
             my ($class, $serialiser, $type, $id) = @_;

             $class->new (type => $type, id => $id)
          }

ENCODING/CODESET FLAG NOTES

       This section is taken from JSON::XS.

       The interested reader might have seen a number of flags that signify encodings or codesets
       - "utf8", "latin1" and "ascii". There seems to be some confusion on what these do, so here
       is a short comparison:

       "utf8" controls whether the JSON text created by "encode" (and expected by "decode") is
       UTF-8 encoded or not, while "latin1" and "ascii" only control whether "encode" escapes
       character values outside their respective codeset range. Neither of these flags conflict
       with each other, although some combinations make less sense than others.

       Care has been taken to make all flags symmetrical with respect to "encode" and "decode",
       that is, texts encoded with any combination of these flag values will be correctly decoded
       when the same flags are used - in general, if you use different flag settings while
       encoding vs. when decoding you likely have a bug somewhere.

       Below comes a verbose discussion of these flags. Note that a "codeset" is simply an
       abstract set of character-codepoint pairs, while an encoding takes those codepoint numbers
       and encodes them, in our case into octets. Unicode is (among other things) a codeset,
       UTF-8 is an encoding, and ISO-8859-1 (= latin 1) and ASCII are both codesets and encodings
       at the same time, which can be confusing.

       "utf8" flag disabled
           When "utf8" is disabled (the default), then "encode"/"decode" generate and expect
           Unicode strings, that is, characters with high ordinal Unicode values (> 255) will be
           encoded as such characters, and likewise such characters are decoded as-is, no changes
           to them will be done, except "(re-)interpreting" them as Unicode codepoints or Unicode
           characters, respectively (to Perl, these are the same thing in strings unless you do
           funny/weird/dumb stuff).

           This is useful when you want to do the encoding yourself (e.g. when you want to have
           UTF-16 encoded JSON texts) or when some other layer does the encoding for you (for
           example, when printing to a terminal using a filehandle that transparently encodes to
           UTF-8 you certainly do NOT want to UTF-8 encode your data first and have Perl encode
           it another time).

       "utf8" flag enabled
           If the "utf8"-flag is enabled, "encode"/"decode" will encode all characters using the
           corresponding UTF-8 multi-byte sequence, and will expect your input strings to be
           encoded as UTF-8, that is, no "character" of the input string must have any value >
           255, as UTF-8 does not allow that.

           The "utf8" flag therefore switches between two modes: disabled means you will get a
           Unicode string in Perl, enabled means you get an UTF-8 encoded octet/binary string in
           Perl.

       "latin1" or "ascii" flags enabled
           With "latin1" (or "ascii") enabled, "encode" will escape characters with ordinal
           values > 255 (> 127 with "ascii") and encode the remaining characters as specified by
           the "utf8" flag.

           If "utf8" is disabled, then the result is also correctly encoded in those character
           sets (as both are proper subsets of Unicode, meaning that a Unicode string with all
           character values < 256 is the same thing as a ISO-8859-1 string, and a Unicode string
           with all character values < 128 is the same thing as an ASCII string in Perl).

           If "utf8" is enabled, you still get a correct UTF-8-encoded string, regardless of
           these flags, just some more characters will be escaped using "\uXXXX" then before.

           Note that ISO-8859-1-encoded strings are not compatible with UTF-8 encoding, while
           ASCII-encoded strings are. That is because the ISO-8859-1 encoding is NOT a subset of
           UTF-8 (despite the ISO-8859-1 codeset being a subset of Unicode), while ASCII is.

           Surprisingly, "decode" will ignore these flags and so treat all input values as
           governed by the "utf8" flag. If it is disabled, this allows you to decode ISO-8859-1-
           and ASCII-encoded strings, as both strict subsets of Unicode. If it is enabled, you
           can correctly decode UTF-8 encoded strings.

           So neither "latin1" nor "ascii" are incompatible with the "utf8" flag - they only
           govern when the JSON output engine escapes a character or not.

           The main use for "latin1" is to relatively efficiently store binary data as JSON, at
           the expense of breaking compatibility with most JSON decoders.

           The main use for "ascii" is to force the output to not contain characters with values
           > 127, which means you can interpret the resulting string as UTF-8, ISO-8859-1, ASCII,
           KOI8-R or most about any character set and 8-bit-encoding, and still get the same data
           structure back. This is useful when your channel for JSON transfer is not 8-bit clean
           or the encoding might be mangled in between (e.g. in mail), and works because ASCII is
           a proper subset of most 8-bit and multibyte encodings in use in the world.

BACKWARD INCOMPATIBILITY

       Since version 2.90, stringification (and string comparison) for "JSON::true" and
       "JSON::false" has not been overloaded. It shouldn't matter as long as you treat them as
       boolean values, but a code that expects they are stringified as "true" or "false" doesn't
       work as you have expected any more.

           if (JSON::true eq 'true') {  # now fails

           print "The result is $JSON::true now."; # => The result is 1 now.

       And now these boolean values don't inherit JSON::Boolean, either.  When you need to test a
       value is a JSON boolean value or not, use "JSON::is_bool" function, instead of testing the
       value inherits a particular boolean class or not.

BUGS

       Please report bugs on backend selection and additional features this module provides to RT
       or GitHub issues for this module:

       <https://rt.cpan.org/Public/Dist/Display.html?Queue=JSON>

       <https://github.com/makamaka/JSON/issues>

       As for bugs on a specific behavior, please report to the author of the backend module you
       are using.

       As for new features and requests to change common behaviors, please ask the author of
       JSON::XS (Marc Lehmann, <schmorp[at]schmorp.de>) first, by email (important!), to keep
       compatibility among JSON.pm backends.

SEE ALSO

       JSON::XS, Cpanel::JSON::XS, JSON::PP for backends.

       JSON::MaybeXS, an alternative that prefers Cpanel::JSON::XS.

       "RFC4627"(<http://www.ietf.org/rfc/rfc4627.txt>)

       RFC7159 (<http://www.ietf.org/rfc/rfc7159.txt>)

       RFC8259 (<http://www.ietf.org/rfc/rfc8259.txt>)

AUTHOR

       Makamaka Hannyaharamitu, <makamaka[at]cpan.org>

       JSON::XS was written by  Marc Lehmann <schmorp[at]schmorp.de>

       The release of this new version owes to the courtesy of Marc Lehmann.

CURRENT MAINTAINER

       Kenichi Ishigaki, <ishigaki[at]cpan.org>

COPYRIGHT AND LICENSE

       Copyright 2005-2013 by Makamaka Hannyaharamitu

       Most of the documentation is taken from JSON::XS by Marc Lehmann

       This library is free software; you can redistribute it and/or modify it under the same
       terms as Perl itself.