Provided by: libnetaddr-ip-perl_4.079+dfsg-2build1_amd64 bug

NAME

       NetAddr::IP::Lite - Manages IPv4 and IPv6 addresses and subnets

SYNOPSIS

         use NetAddr::IP::Lite qw(
               Zeros
               Ones
               V4mask
               V4net
               :aton           DEPRECATED !
               :old_nth
               :upper
               :lower
               :nofqdn
         );

         my $ip = new NetAddr::IP::Lite '127.0.0.1';
               or if your prefer
         my $ip = NetAddr::IP::Lite->new('127.0.0.1);
               or from a packed IPv4 address
         my $ip = new_from_aton NetAddr::IP::Lite (inet_aton('127.0.0.1'));
               or from an octal filtered IPv4 address
         my $ip = new_no NetAddr::IP::Lite '127.012.0.0';

         print "The address is ", $ip->addr, " with mask ", $ip->mask, "\n" ;

         if ($ip->within(new NetAddr::IP::Lite "127.0.0.0", "255.0.0.0")) {
             print "Is a loopback address\n";
         }

                                       # This prints 127.0.0.1/32
         print "You can also say $ip...\n";

         The following four functions return ipV6 representations of:

         ::                                       = Zeros();
         FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF  = Ones();
         FFFF:FFFF:FFFF:FFFF:FFFF:FFFF::          = V4mask();
         ::FFFF:FFFF                              = V4net();

         Will also return an ipV4 or ipV6 representation of a
         resolvable Fully Qualified Domanin Name (FQDN).

INSTALLATION

       Un-tar the distribution in an appropriate directory and type:

               perl Makefile.PL
               make
               make test
               make install

       NetAddr::IP::Lite depends on NetAddr::IP::Util which installs by default with its primary
       functions compiled using Perl's XS extensions to build a 'C' library. If you do not have a
       'C' compiler available or would like the slower Pure Perl version for some other reason,
       then type:

               perl Makefile.PL -noxs
               make
               make test
               make install

DESCRIPTION

       This module provides an object-oriented abstraction on top of IP addresses or IP subnets,
       that allows for easy manipulations. Most of the operations of NetAddr::IP are supported.
       This module will work with older versions of Perl and is compatible with Math::BigInt.

       * By default NetAddr::IP functions and methods return string IPv6 addresses in uppercase.
       To change that to lowercase:

       NOTE: the AUGUST 2010 RFC5952 states:

           4.3. Lowercase

             The characters "a", "b", "c", "d", "e", and "f" in an IPv6
             address MUST be represented in lowercase.

       It is recommended that all NEW applications using NetAddr::IP::Lite be invoked as shown on
       the next line.

         use NetAddr::IP::Lite qw(:lower);

       * To ensure the current IPv6 string case behavior even if the default changes:

         use NetAddr::IP::Lite qw(:upper);

       The internal representation of all IP objects is in 128 bit IPv6 notation.  IPv4 and IPv6
       objects may be freely mixed.

       The supported operations are described below:

   Overloaded Operators
       Assignment ("=")
           Has been optimized to copy one NetAddr::IP::Lite object to another very quickly.

       "->copy()"
           The assignment ("=") operation is only put in to operation when the copied object is
           further mutated by another overloaded operation. See overload SPECIAL SYMBOLS FOR "use
           overload" for details.

           "->copy()" actually creates a new object when called.

       Stringification
           An object can be used just as a string. For instance, the following code

                   my $ip = new NetAddr::IP::Lite '192.168.1.123';
                   print "$ip\n";

           Will print the string 192.168.1.123/32.

                   my $ip = new6 NetAddr::IP::Lite '192.168.1.123';
                   print "$ip\n";

           Will print the string 0:0:0:0:0:0:C0A8:17B/128

       Equality
           You can test for equality with either "eq", "ne", "==" or "!=". "eq", "ne" allows the
           comparison with arbitrary strings as well as NetAddr::IP::Lite objects. The following
           example:

               if (NetAddr::IP::Lite->new('127.0.0.1','255.0.0.0') eq '127.0.0.1/8')
                  { print "Yes\n"; }

           Will print out "Yes".

           Comparison with "==" and "!=" requires both operands to be NetAddr::IP::Lite objects.

       Comparison via >, <, >=, <=, <=> and "cmp"
           Internally, all network objects are represented in 128 bit format.  The numeric
           representation of the network is compared through the corresponding operation.
           Comparisons are tried first on the address portion of the object and if that is equal
           then the NUMERIC cidr portion of the masks are compared. This leads to the
           counterintuitive result that

                   /24 > /16

           Comparison should not be done on netaddr objects with different CIDR as this may
           produce indeterminate - unexpected results, rather the determination of which netblock
           is larger or smaller should be done by comparing

                   $ip1->masklen <=> $ip2->masklen

       Addition of a constant ("+")
           Add a 32 bit signed constant to the address part of a NetAddr object.  This operation
           changes the address part to point so many hosts above the current objects start
           address. For instance, this code:

               print NetAddr::IP::Lite->new('127.0.0.1/8') + 5;

           will output 127.0.0.6/8. The address will wrap around at the broadcast back to the
           network address. This code:

               print NetAddr::IP::Lite->new('10.0.0.1/24') + 255;

           outputs 10.0.0.0/24.

           Returns the the unchanged object when the constant is missing or out of range.

               2147483647 <= constant >= -2147483648

       Subtraction of a constant ("-")
           The complement of the addition of a constant.

       Difference ("-")
           Returns the difference between the address parts of two NetAddr::IP::Lite objects
           address parts as a 32 bit signed number.

           Returns undef if the difference is out of range.

       Auto-increment
           Auto-incrementing a NetAddr::IP::Lite object causes the address part to be adjusted to
           the next host address within the subnet. It will wrap at the broadcast address and
           start again from the network address.

       Auto-decrement
           Auto-decrementing a NetAddr::IP::Lite object performs exactly the opposite of auto-
           incrementing it, as you would expect.

   Methods
       "->new([$addr, [ $mask|IPv6 ]])"
       "->new6([$addr, [ $mask]])"
       "->new6FFFF([$addr, [ $mask]])"
       "->new_no([$addr, [ $mask]])"
       "->new_from_aton($netaddr)"
       new_cis and new_cis6 are DEPRECATED
       "->new_cis("$addr $mask)"
       "->new_cis6("$addr $mask)"
           The first three methods create a new address with the supplied address in $addr and an
           optional netmask $mask, which can be omitted to get a /32 or /128 netmask for IPv4 /
           IPv6 addresses respectively.

           new6FFFF specifically returns an IPv4 address in IPv6 format according to RFC4291

             new6               ::xxxx:xxxx
             new6FFFF      ::FFFF:xxxx:xxxx

           The third method "new_no" is exclusively for IPv4 addresses and filters improperly
           formatted dot quad strings for leading 0's that would normally be interpreted as octal
           format by NetAddr per the specifications for inet_aton.

           new_from_aton takes a packed IPv4 address and assumes a /32 mask. This function
           replaces the DEPRECATED :aton functionality which is fundamentally broken.

           The last two methods new_cis and new_cis6 differ from new and new6 only in that they
           except the common Cisco address notation for address/mask pairs with a space as a
           separator instead of a slash (/)

           These methods are DEPRECATED because the functionality is now included in the other
           "new" methods

             i.e.  ->new_cis('1.2.3.0 24')
                   or
                   ->new_cis6('::1.2.3.0 120')

           "->new6" and "->new_cis6" mark the address as being in ipV6 address space even if the
           format would suggest otherwise.

             i.e.  ->new6('1.2.3.4') will result in ::102:304

             addresses submitted to ->new in ipV6 notation will
             remain in that notation permanently. i.e.
                   ->new('::1.2.3.4') will result in ::102:304
             whereas new('1.2.3.4') would print out as 1.2.3.4

             See "STRINGIFICATION" below.

           $addr can be almost anything that can be resolved to an IP address in all the
           notations I have seen over time. It can optionally contain the mask in CIDR notation.
           If the OPTIONAL perl module Socket6 is available in the local library it will autoload
           and ipV6 host6 names will be resolved as well as ipV4 hostnames.

           prefix notation is understood, with the limitation that the range specified by the
           prefix must match with a valid subnet.

           Addresses in the same format returned by "inet_aton" or "gethostbyname" can also be
           understood, although no mask can be specified for them. The default is to not attempt
           to recognize this format, as it seems to be seldom used.

           ###### DEPRECATED, will be remove in version 5 ############ To accept addresses in
           that format, invoke the module as in

             use NetAddr::IP::Lite ':aton'

           ###### USE new_from_aton instead ##########################

           If called with no arguments, 'default' is assumed.

           If called with an empty string as the argument, returns 'undef'

           $addr can be any of the following and possibly more...

             n.n
             n.n/mm
             n.n mm
             n.n.n
             n.n.n/mm
             n.n.n mm
             n.n.n.n
             n.n.n.n/mm            32 bit cidr notation
             n.n.n.n mm
             n.n.n.n/m.m.m.m
             n.n.n.n m.m.m.m
             loopback, localhost, broadcast, any, default
             x.x.x.x/host
             0xABCDEF, 0b111111000101011110, (or a bcd number)
             a netaddr as returned by 'inet_aton'

           Any RFC1884 notation

             ::n.n.n.n
             ::n.n.n.n/mmm         128 bit cidr notation
             ::n.n.n.n/::m.m.m.m
             ::x:x
             ::x:x/mmm
             x:x:x:x:x:x:x:x
             x:x:x:x:x:x:x:x/mmm
             x:x:x:x:x:x:x:x/m:m:m:m:m:m:m:m any RFC1884 notation
             loopback, localhost, unspecified, any, default
             ::x:x/host
             0xABCDEF, 0b111111000101011110 within the limits
             of perl's number resolution
             123456789012  a 'big' bcd number (bigger than perl likes)
             and Math::BigInt

           A Fully Qualified Domain Name which returns an ipV4 address or an ipV6 address,
           embodied in that order. This previously undocumented feature may be disabled with:

                   use NetAddr::IP::Lite ':nofqdn';

           If called with no arguments, 'default' is assumed.

           If called with and empty string as the argument, 'undef' is returned;

       "->broadcast()"
           Returns a new object referring to the broadcast address of a given subnet. The
           broadcast address has all ones in all the bit positions where the netmask has zero
           bits. This is normally used to address all the hosts in a given subnet.

       "->network()"
           Returns a new object referring to the network address of a given subnet. A network
           address has all zero bits where the bits of the netmask are zero. Normally this is
           used to refer to a subnet.

       "->addr()"
           Returns a scalar with the address part of the object as an IPv4 or IPv6 text string as
           appropriate. This is useful for printing or for passing the address part of the
           NetAddr::IP::Lite object to other components that expect an IP address. If the object
           is an ipV6 address or was created using ->new6($ip) it will be reported in ipV6 hex
           format otherwise it will be reported in dot quad format only if it resides in ipV4
           address space.

       "->mask()"
           Returns a scalar with the mask as an IPv4 or IPv6 text string as described above.

       "->masklen()"
           Returns a scalar the number of one bits in the mask.

       "->bits()"
           Returns the width of the address in bits. Normally 32 for v4 and 128 for v6.

       "->version()"
           Returns the version of the address or subnet. Currently this can be either 4 or 6.

       "->cidr()"
           Returns a scalar with the address and mask in CIDR notation. A NetAddr::IP::Lite
           object stringifies to the result of this function.  (see comments about ->new6() and
           ->addr() for output formats)

       "->aton()"
           Returns the address part of the NetAddr::IP::Lite object in the same format as the
           "inet_aton()" or "ipv6_aton" function respectively. If the object was created using
           ->new6($ip), the address returned will always be in ipV6 format, even for addresses in
           ipV4 address space.

       "->range()"
           Returns a scalar with the base address and the broadcast address separated by a dash
           and spaces. This is called range notation.

       "->numeric()"
           When called in a scalar context, will return a numeric representation of the address
           part of the IP address. When called in an array context, it returns a list of two
           elements. The first element is as described, the second element is the numeric
           representation of the netmask.

           This method is essential for serializing the representation of a subnet.

       "->bigint()"
           When called in a scalar context, will return a Math::BigInt representation of the
           address part of the IP address. When called in an array contest, it returns a list of
           two elements. The first element is as described, the second element is the
           Math::BigInt  representation of the netmask.

       "$me->contains($other)"
           Returns true when $me completely contains $other. False is returned otherwise and
           "undef" is returned if $me and $other are not both "NetAddr::IP::Lite" objects.

       "$me->within($other)"
           The complement of "->contains()". Returns true when $me is completely contained within
           $other, undef if $me and $other are not both "NetAddr::IP::Lite" objects.

       C->is_rfc1918()>
           Returns true when $me is an RFC 1918 address.

                10.0.0.0        -   10.255.255.255  (10/8 prefix)
                172.16.0.0      -   172.31.255.255  (172.16/12 prefix)
                192.168.0.0     -   192.168.255.255 (192.168/16 prefix)

       "->is_local()"
           Returns true when $me is a local network address.

                   i.e.    ipV4    127.0.0.0 - 127.255.255.255
             or            ipV6    === ::1

       "->first()"
           Returns a new object representing the first usable IP address within the subnet (ie,
           the first host address).

       "->last()"
           Returns a new object representing the last usable IP address within the subnet (ie,
           one less than the broadcast address).

       "->nth($index)"
           Returns a new object representing the n-th usable IP address within the subnet (ie,
           the n-th host address).  If no address is available (for example, when the network is
           too small for $index hosts), "undef" is returned.

           Version 4.00 of NetAddr::IP and version 1.00 of NetAddr::IP::Lite implements
           "->nth($index)" and "->num()" exactly as the documentation states.  Previous versions
           behaved slightly differently and not in a consistent manner.

           To use the old behavior for "->nth($index)" and "->num()":

             use NetAddr::IP::Lite qw(:old_nth);

             old behavior:
             NetAddr::IP->new('10/32')->nth(0) == undef
             NetAddr::IP->new('10/32')->nth(1) == undef
             NetAddr::IP->new('10/31')->nth(0) == undef
             NetAddr::IP->new('10/31')->nth(1) == 10.0.0.1/31
             NetAddr::IP->new('10/30')->nth(0) == undef
             NetAddr::IP->new('10/30')->nth(1) == 10.0.0.1/30
             NetAddr::IP->new('10/30')->nth(2) == 10.0.0.2/30
             NetAddr::IP->new('10/30')->nth(3) == 10.0.0.3/30

           Note that in each case, the broadcast address is represented in the output set and
           that the 'zero'th index is alway undef except for a point-to-point /31 or /127 network
           where there are exactly two addresses in the network.

             new behavior:
             NetAddr::IP->new('10/32')->nth(0)  == 10.0.0.0/32
             NetAddr::IP->new('10.1/32'->nth(0) == 10.0.0.1/32
             NetAddr::IP->new('10/31')->nth(0)  == 10.0.0.0/32
             NetAddr::IP->new('10/31')->nth(1)  == 10.0.0.1/32
             NetAddr::IP->new('10/30')->nth(0) == 10.0.0.1/30
             NetAddr::IP->new('10/30')->nth(1) == 10.0.0.2/30
             NetAddr::IP->new('10/30')->nth(2) == undef

           Note that a /32 net always has 1 usable address while a /31 has exactly two usable
           addresses for point-to-point addressing. The first index (0) returns the address
           immediately following the network address except for a /31 or /127 when it return the
           network address.

       "->num()"
           As of version 4.42 of NetAddr::IP and version 1.27 of NetAddr::IP::Lite a /31 and /127
           with return a net num value of 2 instead of 0 (zero) for point-to-point networks.

           Version 4.00 of NetAddr::IP and version 1.00 of NetAddr::IP::Lite return the number of
           usable IP addresses within the subnet, not counting the broadcast or network address.

           Previous versions worked only for ipV4 addresses, returned a maximum span of 2**32 and
           returned the number of IP addresses not counting the broadcast address.       (one
           greater than the new behavior)

           To use the old behavior for "->nth($index)" and "->num()":

             use NetAddr::IP::Lite qw(:old_nth);

           WARNING:

           NetAddr::IP will calculate and return a numeric string for network ranges as large as
           2**128. These values are TEXT strings and perl can treat them as integers for numeric
           calculations.

           Perl on 32 bit platforms only handles integer numbers up to 2**32 and on 64 bit
           platforms to 2**64.

           If you wish to manipulate numeric strings returned by NetAddr::IP that are larger than
           2**32 or 2**64, respectively,  you must load additional modules such as Math::BigInt,
           bignum or some similar package to do the integer math.

EXPORT_OK

               Zeros
               Ones
               V4mask
               V4net
               :aton           DEPRECATED
               :old_nth
               :upper
               :lower
               :nofqdn

AUTHORS

       Luis E. Muñoz <luismunoz@cpan.org>, Michael Robinton <michael@bizsystems.com>

WARRANTY

       This software comes with the  same warranty as perl itself (ie, none), so by using it you
       accept any and all the liability.

COPYRIGHT

        This software is (c) Luis E. Muñoz, 1999 - 2005
        and (c) Michael Robinton, 2006 - 2014.

       All rights reserved.

       This program is free software; you can redistribute it and/or modify it under the terms of
       either:

         a) the GNU General Public License as published by the Free
         Software Foundation; either version 2, or (at your option) any
         later version, or

         b) the "Artistic License" which comes with this distribution.

       This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
       without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
       See either the GNU General Public License or the Artistic License for more details.

       You should have received a copy of the Artistic License with this distribution, in the
       file named "Artistic".  If not, I'll be glad to provide one.

       You should also have received a copy of the GNU General Public License along with this
       program in the file named "Copying". If not, write to the

               Free Software Foundation, Inc.,
               51 Franklin Street, Fifth Floor
               Boston, MA 02110-1301 USA

       or visit their web page on the internet at:

               http://www.gnu.org/copyleft/gpl.html.

SEE ALSO

       NetAddr::IP(3), NetAddr::IP::Util(3), NetAddr::IP::InetBase(3)