Provided by: libnetapp-perl_500.002-3_all bug

NAME

       NetApp::Filer -- OO Class for managing NetApp Filer devices

SYNOPSIS

           use NetApp::Filer;

           my $filer           = NetApp::Filer->new({
               hostname        => $hostname_of_nasfiler,
               ssh_identity    => "/path/to/ssh/identify/file",
           });

           my $filer           = NetApp::Filer->new({
               hostname        => $hostname_of_nasfiler,
               protocol        => 'telnet',
               telnet_password => $telnet_password,
           });

DESCRIPTION

       This class implements methods for communication with a NetApp Filer device.  Both ssh and
       telnet are supported, but only ssh is really recommended.  NetApp doesn't support
       concurrent access via telnet, and the error checking using ssh is far more robust.  Not to
       mention, you can configure secure access via ssh without using passwords, but telnet
       access will always require a password.

METHODS

   Filer Specific Methods
       new( $args_ref )

       This method takes a hash reference of arguments, and returns a NetApp::Filer object to be
       used to communicate with the specified filer.

       The arguments are as follows:

           NetApp::Filer->new({
               # Required arguments
               hostname        => $hostname,
               # Optional arguments
               username        => $username,
               ssh_identify    => $ssh_identity,
               ssh_command     => [ @ssh_command ],
               protocol        => 'ssh' | 'telnet',
               telnet_password => $telnet_password,
               telnet_timeout  => $telnet_timeout,
               cache_enabled   => 0 || 1,
               cache_expiration => $cache_expiration,
           });

       (required) hostname
           The value of this argument is a string, which is the hostname of the filer to connect
           to.

       (optional) username
           The username to use for communication.  Defaults to 'root'.

       (optional) ssh_identify
           The ssh identify file to use for ssh communication.  If not specified then ssh will be
           invoked without the -i argument, and will use whatever default identify file is setup
           for the current user.

           In practice, this argument will almost always be required, but the code allows it to
           be optional.

           If the specified file doesn't exist, then a fatal exception is raised.

       (optional) ssh_command
           An array reference representing the ssh command to be used to communication.  Defaults
           to just ['ssh'].

           Don't use this argument to specify the identity via -i.  Instead, use the ssh_identify
           argument.  If you need to specify certain ssh options, for example
           StrictHostKeyChecking, then use this argument.  For example:

               my $filer           = NetApp::Filer->new({
                   hostname        => $somenasfiler,
                   ssh_command     => [qw( ssh -o StrictHostKeyChecking=no )],
               });

       (optional) protocol
           This option is a string, either 'ssh' or 'telnet'.  The default, and recommended,
           protocol is ssh.  While telnet is supported, only one concurrent root telnet session
           per filer is allowed, and the error checking over telnet is far less robust than ssh.

       (optional) telnet_password
           This option is a string, and specified the root password to use when connecting via
           telnet.  Note that password based ssh connectivity is not supported, and telnet
           access, while supported, is not recommended.  The author uses the telnet support for
           only one thing: installing the ssh keys, and configuring ssh access.

       (optional) cache_enabled
           NOTE: The caching mechanism is considered experimental.  For one thing, it depends on
           using a patched version of Memoize::Expire, which is still not yet available on CPAN.
           Use with caution.

           This option has a boolean value, and is used to disable the internal caching of the
           results of several API calls.  By default, the cache is disabled.  If enabled, then
           the result of any of the following NetApp::Filer methods will be cached, using
           Memoize:

               get_aggregate
               get_volume
               get_qtree

           To enable caching of these API calls, set cache_enabled to a true value.  The cached
           values will expire (see the next option), unless the expiration value is set to 0.

       (optional) cache_expiration
           This option is an integer, and is the number of seconds to cache results of the above
           API calls.  The default value is 10 seconds.  Setting this value to 0 will prevent the
           cached values from expiring at all.

       get_version

       Returns a NetApp::Filer::Version object.

       get_licenses

       Returns a list of NetApp::Filer::License objects, each of which represents a single
       licensed service on the filer.  Note that if the service is "not licensed", it is ignored.
       Only services with active of expired licensed are returned.

       get_license( $service )

       Returns a single NetApp::Filer::License object for the specified service.

       add_license( $code )

       Adds a license using the specified code.  Returns a boolean value only.

       delete_license( $service )

       Deleted the license for the specified service.  Returns a boolean value only.

   Aggregate Specific Methods
       get_aggregate_names

       Returns a list of strings, each of which is the name of an aggregate on the filer.

       get_aggregates

       Returns a list of NetApp::Aggregate objects, each of which represents an aggregate on the
       filer.

       get_aggregate( $name )

       Returns a single NetApp::Aggregate object for the specified aggregate name.

       create_aggregate( %args )

       Create an aggregate using the specified arguments, and returns the NetApp::Aggregate
       object that represents it.  The arguments are as follows:

           my $aggregate = $filer->create_aggregate(
               # Required arguments
               name            => $name,
               # Optional arguments
               raidtype        => 'raid0' | 'raid4' | 'raid_dp',
               raidsize        => $raidsize,
               disktype        => 'ATA' | 'FCAL' | 'LUN' | 'SAS' | 'SATA' | 'SCSI',
               diskcount       => $diskcount,
               disksize        => $disksize,
               rpm             => $rpm,
               language        => $language,
               snaplock        => 'Compliance' | 'Enterprise',
               mirrored        => 1,           # -m
               traditional     => 1,           # -v
               force           => 1,           # -f
               disks           => [
                   # To specify a single set of disks:
                   'disk1', 'disk2', ....
                   # To specify two sets of disks:
                   [ 'disk1', 'disk2', .... ],
                   [ 'diskn', 'disktn+1', .... ],
               ],
           );

       destroy_aggregate( %args )

       Destroy an aggregate using the specified arguments.  The arguments are as follows:

           $filer->destroy_aggregate(
               # Required arguments
               name            => $name,
           );

   Volume Specific Methods
       get_volume_names

       Returns a list of strings, each of which is the name of a volume on the filer.

       get_volumes

       Returns a list of NetApp::Volume objects, each of which represents a volume on the filer.

       get_volume( $name )

       Returns a single NetApp::Volume object for the specified volume name.

   Qtree Specific Methods
       get_qtree_names

       Returns a list of strings, each of which is the name of a qtree on the filer.

       get_qtrees

       Returns a list of NetApp::Qtree objects, each of which represents a single qtree on the
       filer.

       get_qtree( $name )

       Returns a single NetApp::Qtree object for the specified qtree name. The name must in the
       form of a pathname, for example:

           /vol/volume_name/qtree_name

       The qtree_name is optional if querying the object for a volume's qtree.

       create_qtree( %args )

       Creates a qtree on the filer.  The arguments are as follows:

           $filer->create_qtree(
               # Required arguments
               name            => $name,
               # Optional arguments
               mode            => $mode,
               security        => 'unix' | 'ntfs' | 'mixed',
               oplocks         => 0 | 1,
           );

       (required) name
           The name of the qtree to create.

       (optional) mode
           The UNIX mode bits to use when creating the qtree.

       (optional) security
           The security of the qtree.  This must be one of: unix, ntfs, or mixed.

       (optional) oplocks
           This option specified whether or not oplocks are to be enabled on the qtree.  The
           value is interpreted in a boolean context, true meaning "enabled" and false meaning
           "disabled".

   Snapmirror Specific Methods
       set_snapmirror_state( $state )

       Sets the snapmirror state on the filer to the specified value, which must be either of the
       strings "off" or "on".

       get_snapmirror_state

       Returns a string, either "off" or "on", indicating whether or not snapmirror is turned off
       or on for this filer.

       get_snapmirrors

       Returns a list of NetApp::Snapmirror objecte, each of which represents a single snapmirror
       relationship on the filer.

   Export Specific Methods
       There is one general purpose method to retrieve all of the NFS exports on a filer, and 4
       special purpose ones that make it easy to see the difference between the contents of
       /etc/exports, and the live exports reported by "exportfs".

       get_exports

       Returns a list of NetApp::Filer::Export objects, each of which represents an NFS export on
       the filer.

       get_permanent_exports

       Returns a list of NetApp::Filer::Export objects, each of which represents a permanent
       export, which is one found in the /etc/exports file.

       get_temporary_exports

       Returns a list of NetApp::Filer::Export objects, each of which represents a temporary
       export, which is one NOT found in the /etc/exports file.  Temporary exports are ones
       created manually, using "exportfs -io", or by using the "exportfs -b" option to fence
       clients, or any other command which creates a live NFS export that has not yet been
       written to /etc/exports, and which will not survive a reboot of the filer.

       get_active_exports

       Returns a list of NetApp::Filer::Export objects, each of which represents a active export.
       Active exports are those reported by the "exportfs" command.  They can be permanent, if
       they are found in /etc/exports, or temporary, if created by hand.

       get_inactive_exports

       Returns a list of NetApp::Filer::Export objects, each of which represents a inactive
       export.  An inactive export is a permanent export found in /etc/exports, but which is NOT
       found in the list of active exports reported by "exportfs".  If the options of a permanent
       export are changed, but not saved to /etc/exports (eg. re-export something with "exportfs
       -io"), then the active, temporary export for that same path, and the inactive, permanent
       export in /etc/exports can both exist concurrently.