Provided by: firehol-doc_3.1.7+ds-2.1_all bug

NAME

       firehol-connmark - set a stateful mark from the connmark group

SYNOPSIS

       { connmark | connmark46 } value chain rule-params

       connmark4 value chain rule-params

       connmark6 value chain rule-params

DESCRIPTION

       Marks  on  packets  can  be  matched  by  traffic shaping, routing, and firewall rules for
       controlling traffic.

              Note Behaviour changed significantly in FireHOL v3 compared to earlier versions

       FireHOL uses iptables masks to break the single 32-bit integer  mark  value  into  smaller
       groups  and allows you to set and match them independently.  The markdef group definitions
       to set this up are found in firehol-defaults.conf

       The connmark helper command sets values within the connmark  group.   You  can  set  value
       between  0  (no  mark)  and size-1.  The default size for connmark is 64, so 63 is highest
       value possible.  The default connmark types are stateful+permanent,  meaning  the  initial
       match will only be done on NEW packets and the mark will be restored to all packets in the
       connection.

       The chain will be used to find traffic to mark.  It can be any of the iptables(8) built in
       chains  belonging  to  the  mangle  table.   The  chain names are: INPUT, FORWARD, OUTPUT,
       PREROUTING and POSTROUTING.  The names are case-sensitive.

       The rule-params define a set of rule parameters to match the traffic that is to be  marked
       within the chosen chain.  See firehol-params(5) for more details.

       Any connmark commands must be declared before the first router or interface.

              Note

              If you want to do policy based routing based on iptables(8) marks, you will need to
              disable the Root Path Filtering on the interfaces involved (rp_filter in sysctl).

              FireQOS will read the FireHOL mark definitions and  set  up  suitable  offsets  and
              marks  for  the various groups.  If you are using a different tool, you should look
              at the emitted firewall to determine the final masks and values to use.

EXAMPLES

               # mark with 1, packets sent by the local machine
               connmark 1 OUTPUT

               # mark with 2, packets routed by the local machine
               connmark 2 FORWARD

               # mark with 3, packets routed by the local machine, sent from
               #              192.0.2.2 destined for port TCP/25 of 198.51.100.1
               connmark 3 FORWARD proto tcp dport 25 dst 198.51.100.1 src 192.0.2.2

SEE ALSO

firehol(1) - FireHOL program

       • firehol.conf(5) - FireHOL configuration

       • firehol-params(5) - optional rule parameters

       • [firehol-mark(5)][keyword-firehol-mark] - set a stateful mark from the usermark group

       • iptables(8) (http://ipset.netfilter.org/iptables.man.html)  -  administration  tool  for
         IPv4 firewalls

       • ip6tables(8)  (http://ipset.netfilter.org/ip6tables.man.html)  - administration tool for
         IPv6 firewalls

       • ip(8) - show / manipulate routing, devices, policy routing and tunnels

       • FireHOL Website (http://firehol.org/)

       • Working  With  Marks  Wiki  Page  (https://github.com/firehol/firehol/wiki/Working-with-
         MARKs)

       • FireHOL Online PDF Manual (http://firehol.org/firehol-manual.pdf)

       • FireHOL Online Documentation (http://firehol.org/documentation/)

       • Linux Advanced Routing & Traffic Control HOWTO (http://lartc.org/howto/)

AUTHORS

       FireHOL Team.