Provided by: ksmbd-tools_3.4.9-1_amd64 
NAME
ksmbd.conf - the configuration file for ksmbd.mountd
DESCRIPTION
ksmbd.conf is the configuration file for ksmbd.mountd(8) user mode daemon.
ksmbd.addshare(8) may be used for configuring shares for ksmbd.conf. ksmbd.addshare
modifies ksmbd.conf such that its existing formatting is not retained. ksmbd.addshare
notifies ksmbd.mountd of changes, if it had made any, by sending the SIGHUP signal to
ksmbd.mountd. ksmbd.control --reload can be used for notifying ksmbd.mountd of changes
when not using ksmbd.addshare. ksmbd.conf is expected to be at /etc/ksmbd/ksmbd.conf by
default. A configuration file that may serve as an example can be found at
/etc/ksmbd/ksmbd.conf.example.
FILE FORMAT
ksmbd.conf consists of sections with each new section marking the end of the previous one.
A new section begins with the section name enclosed in brackets ([]) followed by a
newline. Each section may contain parameter entries separated by newlines. A parameter
entry consists of a parameter and a value, in that order, separated by an equal sign (=).
The parameter may contain leading and trailing tabs and spaces. The value, which begins
immediately after the equal sign, may contain leading tabs and spaces or be empty. Some
parameter entries can be given a list of multiple values, in which case the values are
separated by commas, tabs, or spaces. For a list of users, all users in a system group
can be specified by giving the group name prefixed with an at sign (@). A semicolon (;)
or a hash (#) marks the beginning of a comment which continues until the end of the line.
SHARES
Each section name, except that of the global section, defines a shared resource, commonly
referred to as a share. A section name, which is the share name, must be UTF-8, [1, 64)
bytes, and is case-insensitive. Users that may be allowed to connect to a share are those
that have user entries in ksmbdpwd.db(5) user database. A share may limit which users are
allowed to connect to a particular share. When connected to a share, the user is mapped
to a system user and underlying filesystem permissions are enforced. By default, this
mapping is done by name, but it may also be done by mapping all users connected to the
share to a single system user and group. When connecting as a user not in the user
database, only guest sessions may work.
PARAMETERS
Share parameters, marked below with (S), may be specified in any section. When a share
parameter is specified in a section other than global, it is specific to that particular
share. Under the global section, a share parameter sets its default value for all shares.
Global parameters, marked below with (G), can only be given in the global section and
control functionality that applies to no specific share. Changes to global parameters
apply only after restarting ksmbd.mountd and ksmbd.
bind interfaces only (G)
Only bind to interfaces specified with interfaces.
Default: bind interfaces only = no
browseable (S)
Share is seen in the list of available shares in a net view and in the browse list.
Default: browseable = yes
comment (S)
Comment string to associate with the share.
Default: comment =
create mask (S)
Octal bitmask that gets bitwise ANDed with DOS-to-UNIX-mapped permissions when
creating a file.
Default: create mask = 0744
deadtime (G)
Number of minutes of inactivity before a connection is considered dead and is then
terminated. The connection is not terminated if it has any open files. With
deadtime = 0, no connection is considered dead due to inactivity.
Default: deadtime = 0
directory mask (S)
Octal bitmask that gets bitwise ANDed with DOS-to-UNIX-mapped permissions when
creating a directory.
Default: directory mask = 0755
force create mode (S)
Octal bitmask that gets bitwise ORed after the bitmask specified with create mask
is applied.
Default: force create mode = 0000
force directory mode (S)
Octal bitmask that gets bitwise ORed after the bitmask specified with directory
mask is applied.
Default: force directory mode = 0000
force group (S)
System group that all users connected to the share should be mapped to.
Default: force group =
force user (S)
System user that all users connected to the share should be mapped to.
Default: force user =
guest account (G)
User that does not require a password when connecting to any share with guest ok =
yes specified. When connecting to such a share with the user left empty, the
parameter determines what system user to map to.
Default: guest account = nobody
guest account (S)
User that does not require a password when connecting to the share with guest ok =
yes specified.
Default: guest account =
guest ok (S)
Allow passwordless connections to the share as the user specified with guest
account and with the user left empty.
Default: guest ok = no
hide dot files (S)
Files starting with a dot appear as hidden files.
Default: hide dot files = yes
inherit owner (S)
Ownership for new files and directories should be controlled by the ownership of
the parent directory.
Default: inherit owner = no
interfaces (G)
List of the interfaces that should be listened to when bind interfaces only = yes
is specified.
Default: interfaces =
invalid users (S)
List of the users that should be disallowed to connect to the share. A user being
in the list has precedence over it being in valid users. With invalid users = , no
user is disallowed.
Default: invalid users =
ipc timeout (G)
Number of seconds user space has time to reply to a heartbeat frame. If exceeded,
all sessions and TCP connections will be closed. With ipc timeout = 0, user space
can reply whenever.
Default: ipc timeout = 0
kerberos keytab file (G)
Path of the keytab file for the service principal. If no value is given, it is the
default keytab resolved with krb5_kt_default(3).
Default: kerberos keytab file =
kerberos service name (G)
Service principal name. If no value is given, it is cifs/ followed by the FQDN
resolved with getaddrinfo(3).
Default: kerberos service name =
map to guest (G)
When to map a user to the user specified with guest account. With map to guest =
bad user, map when the user does not exist.
Default: map to guest = never
max active sessions (G)
Maximum number of simultaneous sessions to all shares.
Default: max active sessions = 1024
max connections (G)
Maximum number of simultaneous connections to the server. With max connections =
0, the value will be set to the maximum allowed number of 65536.
Default: max connections = 128
max connections (S)
Maximum number of simultaneous connections to the share. With max connections = 0,
the value will be set to the maximum allowed number of 65536.
Default: max connections = 128
max open files (G)
Maximum number of simultaneous open files for a client.
Default: max open files = 10000
netbios name (G)
NetBIOS name.
Default: netbios name = KSMBD SERVER
oplocks (S)
Issue oplocks to file open requests on the share.
Default: oplocks = yes
path (S)
Path of the directory users connected to the share are given access to.
Default: path =
read list (S)
List of the users that should be allowed read-only access to the share. A user
being in the list has precedence over read only = no or it being in write list.
Default: read list =
read only (S)
Inverted synonym for writeable.
Default: read only = yes
restrict anonymous (G)
How to restrict connections to any share as the user specified with guest account.
With restrict anonymous = 1 or restrict anonymous = 2, disallow connections to the
IPC$ share and any share that specifies guest ok = no.
Default: restrict anonymous = 0
root directory (G)
Path of the directory prepended to path of every share. Somewhat similar to
chroot(2).
Default: root directory =
server max protocol (G)
Maximum protocol version supported.
Default: server max protocol = SMB3_11
server min protocol (G)
Minimum protocol version supported.
Default: server min protocol = SMB2_10
server multi channel support (G)
Use of SMB3 multi-channel is supported. SMB3 multi-channel support is experimental
and may corrupt data under race conditions.
Default: server multi channel support = no
server signing (G)
Client is allowed or required to use SMB2 signing. With server signing = disabled
or server signing = auto, SMB2 signing is allowed if it is required by the client.
With server signing = mandatory, SMB2 signing is required.
Default: server signing = disabled
server string (G)
String that will appear in browse lists next to the machine name.
Default: server string = SMB SERVER
share:fake_fscaps (G)
Decimal bitmask that gets bitwise ORed with the filesystem capability flags so as
to fake them. With share:fake_fscaps = 64, the FILE_SUPPORTS_SPARSE_FILES flag is
set.
Default: share:fake_fscaps = 64
smb2 leases (G)
Negotiate SMB2 leases on file open requests.
Default: smb2 leases = no
smb2 max credits (G)
Maximum number of outstanding simultaneous SMB2 operations.
Default: smb2 max credits = 8192
smb2 max read (G)
Maximum length that may be used in a SMB2 READ request sent by a client.
Default: smb2 max read = 4MB
smb2 max trans (G)
Maximum buffer size that may be used by a client in a sent SET_INFO request or a
received QUERY_INFO, QUERY_DIRECTORY, or CHANGE_NOTIFY response.
Default: smb2 max trans = 1MB
smb2 max write (G)
Maximum length that may be used in a SMB2 WRITE request sent by a client.
Default: smb2 max write = 4MB
smb3 encryption (G)
Client is disallowed, allowed, or required to use SMB3 encryption. With smb3
encryption = disabled, SMB3 encryption is disallowed even if it is requested by the
client. With smb3 encryption = auto, SMB3 encryption is allowed if it is requested
by the client. With smb3 encryption = mandatory, SMB3 encryption is required. i.e.
clients that do not support encryption will be denied access to the share.
Default: smb3 encryption = auto
smbd max io size (G)
Maximum read/write size of SMB-Direct.
Default: smbd max io size = 8MB
store dos attributes (S)
Store DOS attributes using xattr and then use them in the DOS-to-UNIX-mapping of
permissions.
Default: store dos attributes = yes
tcp port (G)
TCP port that should be listened to.
Default: tcp port = 445
valid users (S)
List of the users that should be allowed to connect to the share. With valid users
= , all users are allowed.
Default: valid users =
veto files (S)
Files and directories that should be made invisible and inaccessible. Files and
directories are specified between forward slashes (/), e.g. veto files = /foo/bar/
to make files and directories named foo and bar invisible and inaccessible. An
asterisk (*) and a question mark (?) may be used for matching any number of
characters and a character, respectively.
Default: veto files =
vfs objects (S)
List of the VFS modules to overload I/O operations with. Available VFS modules are
acl_xattr and streams_xattr.
Default: vfs objects =
workgroup (G)
Workgroup the server will appear to be in when queried by clients.
Default: workgroup = WORKGROUP
write list (S)
List of the users that should be allowed read-write access to the share. A user
being in the list has precedence over read only = yes.
Default: write list =
write ok
Synonym for writeable.
writeable (S)
Inverted synonym for read only.
Default: writeable = no
crossmnt (S)
Allow path lookup to cross a mountpoint to the root of a different filesystem.
Default: crossmnt = yes
COPYRIGHT
Copyright © 2015-2022 ksmbd-tools contributors. License GPLv2: GNU GPL version 2
<https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html>.
This is free software: you are free to change and redistribute it. There is NO WARRANTY,
to the extent permitted by law.
REPORTING BUGS
For bug reports, use the issue tracker at https://github.com/cifsd-team/ksmbd-
tools/issues.
SEE ALSO
Utilities
ksmbd.addshare(8), ksmbd.adduser(8), ksmbd.mountd(8)