Provided by: sympa_6.2.70~dfsg-2_amd64 bug

NAME

       sympa_config - Configuration files for Sympa mailing list manager

DESCRIPTION

       There are three levels in Sympa's main configuration: site global, mail domain and list.

   sympa.conf: Configuration file for global settings
       /etc/sympa/sympa/sympa.conf is main configuration file of Sympa.  Several parameters
       defined in this file may be overridden by robot.conf configuration file for each virtual
       domain, or by config configuration file for each mailing list.

       Format of sympa.conf and robot.conf is as following:

       •   Lines beginning with "#" and containing only spaces are ignored.

       •   Each line has the form "parameter value".  value may contain spaces but may not
           contain newlines.

           There are simple parameters and compound parameters.

           The name of compound parameter consist of a paragraph name and a sub-parameter name
           separated by period (".").  However some compound parameters have simple synonym names
           to keep compatibility to earlier versions (See "Obsoleted sympa.conf parameters").

           Example:

             process_archive on
             archive.web_access open
             archive.mail_access closed

   robot.conf: Optional configuration file for the mail domain
       robot.conf is the optional configuration file for each mail domain.

       Format of robot.conf is the same as sympa.conf above.

   config: Configuration file for the mailing list
       config is main configuration file of each mailing list.

       Format of config is as following:

       •   Lines beginning with "#" and containing only spaces are ignored.

       •   There are simple parameters and compound parameters:

           •   A simple parameter is expressed by single line by each.  The line has the form
               "parameter value".  value may contain spaces but may not contain newlines.

               Several parameters may have multiple values.  If it's the case, values may be
               separated by comma (",") or parameter lines may be repeated.  Some of parameters
               must have one or more of limited values.

               Example:

                 subject This is subject of my list

                 remove_headers User-Agent,Importance

                 custom_headers X-List: mylist
                 custom_headers X-Face: %`-W7!?^]Sg'I-K>P<cdn&k:~A^{x>(]Gc{V...

                 rfc2369_header_fields post,owner

           •   A compound parameter is expressed by multiple lines, so-called "paragraph", that
               consists of the first line specifying paragraph name and subsequent one or more
               sub-parameter lines.  Paragraph must be separated by one or more empty lines from
               the other parameters.

               Several multiple line parameters may occur multiple times.

               Example:

                 archive
                 web_access open
                 mail_access closed

PARAMETERS

       Below is entire list of configuration parameters.

       •   Sub-parameters in paragraph are listed as paragraph"."sub-parameter by each.

       •   "Default" is built-in default value if any.  About symbols for paths, such as
           $SENDMAIL_ALIASES, see "Directory layout
           <https://www.sympa.community/manual/layout.html>".

   Service description
       "domain"

       Primary mail domain name

       Format:
           /"[-\w]+(?:[.][-\w]+)+"/

       Default:
           None, mandatory.

       Context:
           domain (robot.conf), site (sympa.conf)

       Example:

         domain mail.example.org

       "listmaster"

       Email addresses of listmasters

       Format:
           Multiple values allowed, separated by "","".

           /$email/

       Default:
           None, mandatory.

       Context:
           domain (robot.conf), site (sympa.conf)

       Email addresses of the listmasters (users authorized to perform global server commands).
       Some error reports may also be sent to these addresses. Listmasters can be defined for
       each virtual host, however, the default listmasters will have privileges to manage all
       virtual hosts.

       Example:

         listmaster your_email_address@domain.tld

       "supported_lang"

       Supported languages

       Format:
           /"\w+(\-\w+)*"/

       Default:
           "ca,cs,de,el,en-US,es,et,eu,fi,fr,gl,hu,it,ja,ko,nb,nl,oc,pl,pt-BR,ru,sv,tr,vi,zh-CN,zh-TW"

       Context:
           domain (robot.conf), site (sympa.conf)

       All supported languages for the user interface. Languages proper locale information not
       installed are ignored.

       "title"

       Title of service

       Format:
           /".+"/

       Default:
           "Mailing lists service"

       Context:
           domain (robot.conf), site (sympa.conf)

       The name of your mailing list service. It will appear in the header of web interface and
       subjects of several service messages.

       "gecos"

       Display name of Sympa

       Format:
           /".+"/

       Default:
           "SYMPA"

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2a.34 and later.

       This parameter is used for display name in the "From:" header field for the messages sent
       by Sympa itself.

       "legacy_character_support_feature"

       Support of legacy character set

       Format:
           "on" - enabled
           "off" - disabled
       Default:
           "off"

       Context:
           site (sympa.conf)

       If set to "on", enables support of legacy character set according to charset.conf(5)
       configuration file.

       In some language environments, legacy encoding (character set) can be preferred for e-mail
       messages: for example iso-2022-jp in Japanese language.

   Database related
       "update_db_field_types"

       Update database structure

       Format:
           "auto" - automatic
           "off" - disabled
       Default:
           "auto"

       Context:
           site (sympa.conf)

       auto: Updates database table structures automatically.

       However, since version 5.3b.5, Sympa will not shorten field size if it already have been
       longer than the size defined in database definition.

       "db_type"

       Type of the database

       Format:
           /"\w+"/

       Default:
           "mysql"

       Context:
           site (sympa.conf)

       Possible types are "MySQL", "PostgreSQL", "Oracle" and "SQLite".

       "db_host"

       Hostname of the database server

       Format:
           /$host/

       Default:
           None.

       Context:
           site (sympa.conf)

       With PostgreSQL, you can also use the path to Unix Socket Directory, e.g.
       "/var/run/postgresql" for connection with Unix domain socket.

       Example:

         db_host localhost

       "db_port"

       Port of the database server

       Format:
           /"[-/\w]+"/

       Default:
           None.

       Context:
           site (sympa.conf)

       "db_name"

       Name of the database

       Format:
           /".+"/

       Default:
           "sympa"

       Context:
           site (sympa.conf)

       With SQLite, this must be the full path to database file.

       With Oracle Database, this must be SID, net service name or easy connection identifier (to
       use net service name, db_host should be set to "none" and HOST, PORT and SERVICE_NAME
       should be defined in tnsnames.ora file).

       "db_user"

       User for the database connection

       Format:
           /".+"/

       Default:
           None.

       Context:
           site (sympa.conf)

       Example:

         db_user sympa

       "db_passwd"

       Password for the database connection

       Format:
           The value to be concealed.

       Default:
           None.

       Context:
           site (sympa.conf)

       What ever you use a password or not, you must protect the SQL server (is it not a public
       internet service ?)

       Example:

         db_passwd your_passwd

       "db_options"

       Database options

       Format:
           /".+"/

       Default:
           None.

       Context:
           site (sympa.conf)

       If these options are defined, they will be appended to data source name (DSN) fed to
       database driver. Check the related DBD documentation to learn about the available options.

       Example:

         db_options mysql_read_default_file=/home/joe/my.cnf;mysql_socket=tmp/mysql.sock-test

       "db_env"

       Environment variables setting for database

       Format:
           /".+"/

       Default:
           None.

       Context:
           site (sympa.conf)

       With Oracle Database, this is useful for defining ORACLE_HOME and NLS_LANG.

       Example:

         db_env NLS_LANG=American_America.AL32UTF8;ORACLE_HOME=/u01/app/oracle/product/11.2.0/server

       "db_timeout"

       Database processing timeout

       Format:
           /"\d+"/

       Default:
           None.

       Context:
           site (sympa.conf)

       Currently, this parameter may be used for SQLite only.

       "db_additional_subscriber_fields"

       Database private extension to subscriber table

       Format:
           Multiple values allowed, separated by "","".

           /".+"/

       Default:
           None.

       Context:
           site (sympa.conf)

       Adds more fields to "subscriber_table" table. Sympa recognizes fields defined with this
       parameter. You will then be able to use them from within templates and scenarios:

       * for scenarios: [subscriber->field]

       * for templates: [% subscriber.field %]

       These fields will also appear in the list members review page and will be editable by the
       list owner. This parameter is a comma-separated list.

       You need to extend the database format with these fields

       Example:

         db_additional_subscriber_fields billing_delay,subscription_expiration

       "db_additional_user_fields"

       Database private extension to user table

       Format:
           Multiple values allowed, separated by "","".

           /".+"/

       Default:
           None.

       Context:
           site (sympa.conf)

       Adds more fields to "user_table" table. Sympa recognizes fields defined with this
       parameter. You will then be able to use them from within templates: [% subscriber.field %]

       This parameter is a comma-separated list.

       You need to extend the database format with these fields

       Example:

         db_additional_user_fields age,address

   System log
       "syslog"

       System log facility for Sympa

       Format:
           /"\S+"/

       Default:
           "LOCAL1"

       Context:
           site (sympa.conf)

       Do not forget to configure syslog server.

       "log_socket_type"

       Communication mode with syslog server

       Format:
           /"\w+"/

       Default:
           "unix"

       Context:
           site (sympa.conf)

       "log_level"

       Log verbosity

       Format:
           /"\d+"/

       Default:
           0

       Context:
           domain (robot.conf), site (sympa.conf)

       Sets the verbosity of logs.

       0: Only main operations are logged

       3: Almost everything is logged.

       Example:

         log_level 2

   Mail server
       "sendmail"

       Path to sendmail

       Format:
           /".+"/

       Default:
           "/usr/sbin/sendmail"

       Context:
           site (sympa.conf)

       Absolute path to sendmail command line utility (e.g.: a binary named "sendmail" is
       distributed with Postfix).

       Sympa expects this binary to be sendmail compatible (exim, Postfix, qmail and so on
       provide it).

       "sendmail_args"

       Command line parameters passed to sendmail

       Format:
           /".+"/

       Default:
           "-oi -odi -oem"

       Context:
           site (sympa.conf)

       Note that "-f", "-N" and "-V" options and recipient addresses should not be included,
       because they will be included by Sympa.

       "sendmail_aliases"

       Path of the file that contains all list related aliases

       Format:
           /".+"/

       Default:
           $SENDMAIL_ALIASES

       Context:
           domain (robot.conf), site (sympa.conf)

       It is recommended to create a specific alias file so that Sympa never overwrites the
       standard alias file, but only a dedicated file.

       Set this parameter to "none" if you want to disable alias management in Sympa.

       "aliases_program"

       Program used to update alias database

       Format:
           /"makemap|newaliases|postalias|postmap|/.+|none"/

       Default:
           "newaliases"

       Context:
           domain (robot.conf), site (sympa.conf)

       This may be "makemap", "newaliases", "postalias", "postmap" or full path to custom
       program.

       "aliases_wrapper"

       Whether to use the alias wrapper

       Format:
           "off" - disabled
           "on" - enabled
       Default:
           "on"

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2.59b.1 and later.

       If the program to update alias database does not require root privileges, set this
       parameter to "off" and remove the wrapper file sympa_newaliases-wrapper.

       "aliases_db_type"

       Type of alias database

       Format:
           /"\w[-\w]*"/

       Default:
           "hash"

       Context:
           domain (robot.conf), site (sympa.conf)

       "btree", "dbm", "hash" and so on.  Available when aliases_program is "makemap",
       "postalias" or "postmap"

       "alias_manager"

       Path to alias manager

       Format:
           /".+"/

       Default:
           "$SBINDIR/alias_manager.pl"

       Context:
           site (sympa.conf)

       The absolute path to the script that will add/remove mail aliases

       Example:

         alias_manager /usr/local/libexec/ldap_alias_manager.pl

   List definition
       "subject"

       Subject of the list

       Format:
           /".+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       This parameter indicates the subject of the list, which is sent in response to the LISTS
       mail command. The subject is a free form text limited to one line.

       "visibility"

       Visibility of the list

       Format:
           Name of "visibility" scenario:

           "conceal" - conceal except for subscribers
           "identified" - conceal from anonymous users
           "noconceal" - no conceal
           "secret" - conceal even for subscribers
       Default:
           "conceal"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       This parameter indicates whether the list should feature in the output generated in
       response to a LISTS command or should be shown in the list overview of the web-interface.

       "topics"

       Topics for the list

       Format:
           Multiple values allowed, separated by "","".

           List topic.

       Default:
           None.

       Context:
           list (config)

       This parameter allows the classification of lists. You may define multiple topics as well
       as hierarchical ones. WWSympa's list of public lists uses this parameter.

       "lang"

       Language of the list

       Format:
           Language tag.

       Default:
           "en-US"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       This parameter defines the language used for the list. It is used to initialize a user's
       language preference; Sympa command reports are extracted from the associated message
       catalog.

       "family_name"

       Family name

       Format:
           /$family_name/

       Default:
           None.

       Context:
           list (config)

       "max_list_members"

       Maximum number of list members

       Format:
           Number of list members.

       Default:
           0 (list members)

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2a.5 and later.

       limit for the number of subscribers. 0 means no limit.

       "priority"

       Priority

       Format:
           0 - 0 - highest priority
           1 - 1
           2 - 2
           3 - 3
           4 - 4
           5 - 5
           6 - 6
           7 - 7
           8 - 8
           9 - 9 - lowest priority
           "z" - queue messages only
       Default:
           5

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       The priority with which Sympa will process messages for this list. This level of priority
       is applied while the message is going through the spool. The z priority will freeze the
       message in the spool.

   Receiving
       "sender_headers"

       Header field name(s) used to determine sender of the messages

       Format:
           Any.

       Default:
           "From"

       Context:
           site (sympa.conf)

       "Return-Path" means envelope sender (a.k.a. "UNIX From") which will be alternative to
       sender of messages without "From" field.  "Resent-From" may also be inserted before
       "From", because some mailers add it into redirected messages and keep original "From"
       field intact.  In particular cases, "Return-Path" can not give right sender: Several mail
       gateway products rewrite envelope sender and add original one as non-standard field such
       as "X-Envelope-From".  If that is the case, you might want to insert it in place of
       "Return-Path".

       Example:

         sender_headers Resent-From,From,Return-Path

       "misaddressed_commands"

       Reject misaddressed commands

       Format:
           Any.

       Default:
           "reject"

       Context:
           site (sympa.conf)

       When a mail command is sent to a list, by default Sympa rejects this message. This feature
       can be turned off by setting this parameter to "ignore".

       "misaddressed_commands_regexp"

       Regular expression matching with misaddressed commands

       Format:
           Any.

       Default:
           "((subscribe\s+(\S+)|unsubscribe\s+(\S+)|signoff\s+(\S+)|set\s+(\S+)\s+(mail|nomail|digest))\s*)"

       Context:
           site (sympa.conf)

       Perl regular expression applied on messages subject and body to detect misaddressed
       commands.

       "sympa_priority"

       Priority for command messages

       Format:
           0 - 0 - highest priority
           1 - 1
           2 - 2
           3 - 3
           4 - 4
           5 - 5
           6 - 6
           7 - 7
           8 - 8
           9 - 9 - lowest priority
           "z" - queue messages only
       Default:
           1

       Context:
           domain (robot.conf), site (sympa.conf)

       Priority applied to messages sent to Sympa command address.

       "request_priority"

       Priority for messages bound for list owners

       Format:
           0 - 0 - highest priority
           1 - 1
           2 - 2
           3 - 3
           4 - 4
           5 - 5
           6 - 6
           7 - 7
           8 - 8
           9 - 9 - lowest priority
           "z" - queue messages only
       Default:
           0

       Context:
           domain (robot.conf), site (sympa.conf)

       Priority for processing of messages bound for "LIST-request" address, i.e. owners of the
       list

       "owner_priority"

       Priority for non-VERP bounces

       Format:
           0 - 0 - highest priority
           1 - 1
           2 - 2
           3 - 3
           4 - 4
           5 - 5
           6 - 6
           7 - 7
           8 - 8
           9 - 9 - lowest priority
           "z" - queue messages only
       Default:
           9

       Context:
           domain (robot.conf), site (sympa.conf)

       Priority for processing of messages bound for "LIST-owner" address, i.e. non-delivery
       reports (bounces).

       "incoming_max_count"

       Max number of sympa_msg.pl workers

       Format:
           /"\d+"/

       Default:
           1

       Context:
           site (sympa.conf)

       Available versions:
           6.2b.5 and later.

       Max number of workers of sympa_msg.pl daemon processing incoming spool.

       "sleep"

       Interval between scanning incoming message spool

       Format:
           Number of seconds.

       Default:
           5 (seconds)

       Context:
           site (sympa.conf)

       Must not be 0.

   Sending/receiving setup
       "send"

       Who can send messages

       Format:
           Name of "send" scenario:

           "closed" - closed
           "confidential" - restricted to subscribers, messages from others are discarded
           "editordkim" - Moderated, no authentication needed if DKIM signature from moderator is
           OK
           "editorkey" - Moderated
           "editorkeyonly" - Moderated, even for moderators
           "editorkeyonlyauth" - Moderated, need authentication from moderator
           "newsletter" - Newsletter, restricted to moderators
           "newsletterkeyonly" - Newsletter, restricted to moderators after confirmation
           "owner" - Restricted to list owners only
           "ownerauth" - Restricted to list owners with previous MD5 authentication
           "private" - restricted to subscribers
           "private_smime" - restricted to subscribers and checked smime signature
           "privateandeditorkey" - Moderated, restricted to subscribers
           "privateandnomultipartoreditorkey" - Moderated, for non subscribers sending multipart
           messages
           "privatekey" - restricted to subscribers with previous md5 authentication
           "privatekeyandeditorkeyonly" - Moderated, for subscribers and even moderators themself
           "privateoreditorkey" - Private, moderated for non subscribers
           "privateorpublickey" - Private, confirmation for non subscribers
           "public" - public list
           "public_nobcc" - public list, Bcc rejected (anti-spam)
           "publickey" - anyone no authentication if DKIM signature is OK
           "publicnoattachment" - public list multipart/mixed messages are forwarded to moderator
           "publicnomultipart" - public list multipart messages are rejected
       Default:
           "private"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       This parameter specifies who can send messages to the list.

       "delivery_time"

       Delivery time (hh:mm)

       Format:
           /"[0-2]?\d\:[0-6]\d"/

       Default:
           None.

       Context:
           list (config)

       If this parameter is present, non-digest messages will be delivered to subscribers at this
       time: When this time has been past, delivery is postponed to the same time in next day.

       "digest"

       (Paragraph) Digest frequency

       Single occurrence

       Definition of digest mode. If this parameter is present, subscribers can select the option
       of receiving messages in multipart/digest MIME format, or as a plain text digest. Messages
       are then grouped together, and compiled messages are sent to subscribers according to the
       frequency selected with this parameter.

       "digest.days"

       days

       Format:
           Multiple occurrences allowed.

           Day of week, 0 - 6.

       Default:
           None, mandatory.

       Context:
           list (config)

       "digest.hour"

       hour

       Format:
           /"\d+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       "digest.minute"

       minute

       Format:
           /"\d+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       "digest_max_size"

       Digest maximum number of messages

       Format:
           Number of messages.

       Default:
           25 (messages)

       Context:
           list (config)

       "available_user_options"

       (Paragraph) Available subscription options

       Single occurrence

       "available_user_options.reception"

       reception mode

       Format:
           Multiple values allowed, separated by "","".

           Reception mode of list member.

       Default:
           "mail,notice,digest,digestplain,summary,nomail,txt,urlize,not_me"

       Context:
           list (config)

       Only these modes will be allowed for the subscribers of this list. If a subscriber has a
       reception mode not in the list, Sympa uses the mode specified in the default_user_options
       paragraph.

       "default_user_options"

       (Paragraph) Subscription profile

       Single occurrence

       Default profile for the subscribers of the list.

       "default_user_options.reception"

       reception mode

       Format:
           Reception mode of list member.

       Default:
           "mail"

       Context:
           list (config)

       Mail reception mode.

       "default_user_options.visibility"

       visibility

       Format:
           Visibility mode of list member.

       Default:
           "noconceal"

       Context:
           list (config)

       Visibility of the subscriber.

       "msg_topic"

       (Paragraph) Topics for message categorization

       Multiple occurrences allowed

       This paragraph defines a topic used to tag a message of a list, named by msg_topic.name
       ("other" is a reserved word), its title is msg_topic.title. The msg_topic.keywords entry
       is optional and allows automatic tagging. This should be a list of keywords, separated by
       ','.

       "msg_topic.name"

       Message topic name

       Format:
           /"[\-\w]+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       "msg_topic.keywords"

       Message topic keywords

       Format:
           /"[^,\n]+(,[^,\n]+)*"/

       Default:
           None.

       Context:
           list (config)

       "msg_topic.title"

       Message topic title

       Format:
           /".+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       "msg_topic_keywords_apply_on"

       Defines to which part of messages topic keywords are applied

       Format:
           "subject" - subject field
           "body" - message body
           "subject_and_body" - subject and body
       Default:
           "subject"

       Context:
           list (config)

       This parameter indicates which part of the message is used to perform automatic tagging.

       "msg_topic_tagging"

       Message tagging

       Format:
           "required_sender" - required to post message
           "required_moderator" - required to distribute message
           "optional" - optional
       Default:
           "optional"

       Context:
           list (config)

       This parameter indicates if the tagging is optional or required for a list.

       "reply_to_header"

       (Paragraph) Reply address

       Single occurrence

       This defines what Sympa will place in the Reply-To: SMTP header field of the messages it
       distributes.

       "reply_to_header.value"

       value

       Format:
           "sender" - sender
           "list" - list
           "all" - all
           "other_email" - other email address
       Default:
           "sender"

       Context:
           list (config)

       This parameter indicates whether the Reply-To: field should indicate the sender of the
       message (sender), the list itself (list), both list and sender (all) or an arbitrary
       e-mail address (defined by the other_email parameter).

       Note: it is inadvisable to change this parameter, and particularly inadvisable to set it
       to list. Experience has shown it to be almost inevitable that users, mistakenly believing
       that they are replying only to the sender, will send private messages to a list. This can
       lead, at the very least, to embarrassment, and sometimes to more serious consequences.

       "reply_to_header.other_email"

       other email address

       Format:
           /$email/

       Default:
           None.

       Context:
           list (config)

       If value was set to other_email, this parameter defines the e-mail address used.

       "reply_to_header.apply"

       respect of existing header field

       Format:
           "forced" - overwrite Reply-To: header field
           "respect" - preserve existing header field
       Default:
           "respect"

       Context:
           list (config)

       The default is to respect (preserve) the existing Reply-To: SMTP header field in incoming
       messages. If set to forced, Reply-To: SMTP header field will be overwritten.

       "anonymous_sender"

       Anonymous sender

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       To hide the sender's email address before distributing the message. It is replaced by the
       provided email address.

       "anonymous_header_fields"

       Header fields removed when a mailing list is setup in anonymous mode

       Format:
           Any.

       Default:
           "Authentication-Results,Disposition-Notification-To,DKIM-Signature,Fax,Injection-Info,Mailer,Organisation,Organization,Original-Recipient,Originating-Client,Originator,Path,Phone,Received,Received-SPF,Reply-To,Resent-Reply-To,Return-Receipt-To,Telefax,User-Agent,X-Envelope-From,X-Envelope-To,X-Face,X-Mailer,X-MimeOLE,X-Newsreader,X-Sender,X-X-Sender"

       Context:
           site (sympa.conf)

       See "anonymous_sender" list parameter.

       Default value prior to Sympa 6.1.19 is:

         Sender,X-Sender,Received,Message-id,From,X-Envelope-To,Resent-From,Reply-To,Organization,Disposition-Notification-To,X-Envelope-From,X-X-Sender

       "custom_header"

       Custom header field

       Format:
           Multiple occurrences allowed.

           /"\S+:\s+.*"/

       Default:
           None.

       Context:
           list (config)

       This parameter is optional. The headers specified will be added to the headers of messages
       distributed via the list. As of release 1.2.2 of Sympa, it is possible to put several
       custom header lines in the configuration file at the same time.

       "custom_subject"

       Subject tagging

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       This parameter is optional. It specifies a string which is added to the subject of
       distributed messages (intended to help users who do not use automatic tools to sort
       incoming messages). This string will be surrounded by [] characters.

       "footer_type"

       Attachment type

       Format:
           "mime" - add a new MIME part
           "append" - append to message body
       Default:
           "mime"

       Context:
           list (config)

       List owners may decide to add message headers or footers to messages sent via the list.
       This parameter defines the way a footer/header is added to a message.

       mime:

       The default value. Sympa will add the footer/header as a new MIME part.

       append:

       Sympa will not create new MIME parts, but will try to append the header/footer to the body
       of the message. Predefined message-footers will be ignored.

       "max_size"

       Maximum message size

       Format:
           Number of bytes.

       Default:
           5242880 (bytes)

       Context:
           list (config), domain (robot.conf), host

       Maximum size of a message in 8-bit bytes.

       Example:

         max_size 2097152

       "personalization_feature"

       Allow message personalization

       Format:
           "on" - enabled
           "off" - disabled
       Default:
           "off"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2.59b.2 and later.

       "personalization"

       (Paragraph) Message personalization

       Single occurrence

       "personalization.web_apply_on"

       Scope for messages from the web interface

       Format:
           "none" - do nothing
           "footer" - header and footer
           "all" - all
       Default:
           "footer"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       "personalization.mail_apply_on"

       Scope for messages from incoming email

       Format:
           "none" - do nothing
           "footer" - header and footer
           "all" - all
       Default:
           "none"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       "message_hook"

       (Paragraph) Hook modules for message processing

       Single occurrence

       "message_hook.pre_distribute"

       A hook on the messages before distribution

       Format:
           /"(::|\w)+"/

       Default:
           None.

       Context:
           list (config)

       "message_hook.post_archive"

       A hook on the messages just after archiving

       Format:
           /"(::|\w)+"/

       Default:
           None.

       Context:
           list (config)

       "reject_mail_from_automates_feature"

       Reject mail from automatic processes (crontab, etc)?

       Format:
           "on" - enabled
           "off" - disabled
       Default:
           "on"

       Context:
           list (config), site (sympa.conf)

       Available versions:
           6.2a.0 and later.

       Rejects messages that seem to be from automated services, based on a few header fields
       ("Content-Identifier:", "Auto-Submitted:").

       Sympa also can be configured to reject messages based on the "From:" header field value
       (see "loop_prevention_regex").

       "remove_headers"

       Header fields to be removed from incoming messages

       Format:
           Multiple values allowed, separated by "","".

           /"\S+"/

       Default:
           "X-Sympa-To,X-Family-To,Return-Receipt-To,Precedence,X-Sequence,Disposition-Notification-To,Sender"

       Context:
           list (config), site (sympa.conf)

       Use it, for example, to ensure some privacy for your users in case that "anonymous_sender"
       mode is inappropriate.

       The removal of these header fields is applied before Sympa adds its own header fields
       ("rfc2369_header_fields" and "custom_header").

       Example:

         remove_headers Resent-Date,Resent-From,Resent-To,Resent-Message-Id,Sender,Delivered-To

       "remove_outgoing_headers"

       Header fields to be removed before message distribution

       Format:
           Multiple values allowed, separated by "","".

           /"\S+"/

       Default:
           "none"

       Context:
           list (config), site (sympa.conf)

       The removal happens after Sympa's own header fields are added; therefore, it is a
       convenient way to remove Sympa's own header fields (like "X-Loop:" or "X-no-archive:") if
       you wish.

       Example:

         remove_outgoing_headers X-no-archive

       "rfc2369_header_fields"

       RFC 2369 header fields

       Format:
           Multiple values allowed, separated by "","".

           "help" - help
           "subscribe" - subscription
           "unsubscribe" - unsubscription
           "post" - posting address
           "owner" - owner
           "archive" - list archive
       Default:
           "help,subscribe,unsubscribe,post,owner,archive"

       Context:
           list (config), site (sympa.conf)

       Specify which RFC 2369 mailing list header fields to be added.

       "List-Id:" header field defined in RFC 2919 is always added. Sympa also adds "Archived-
       At:" header field defined in RFC 5064.

   Distribution
       "urlize_min_size"

       Minimum size to be urlized

       Format:
           Number of bytes.

       Default:
           10240 (bytes)

       Context:
           domain (robot.conf), site (sympa.conf)

       When a subscriber chose "urlize" reception mode, attachments not smaller than this size
       will be urlized.

       "allowed_external_origin"

       Allowed external links in sanitized HTML

       Format:
           /"[-\w*]+(?:[.][-\w*]+)+"/

       Default:
           None.

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2.19b.2 and later.

       When the HTML content of a message must be sanitized, links ("href" or "src" attributes)
       with the hosts listed in this parameter will not be scrubbed. If "*" character is
       included, it matches any subdomains. Single "*" allows any hosts.

       Example:

         allowed_external_origin *.example.org,www.example.com

       "sympa_packet_priority"

       Default priority for a packet

       Format:
           0 - 0 - highest priority
           1 - 1
           2 - 2
           3 - 3
           4 - 4
           5 - 5
           6 - 6
           7 - 7
           8 - 8
           9 - 9 - lowest priority
           "z" - queue messages only
       Default:
           5

       Context:
           domain (robot.conf), site (sympa.conf)

       The default priority set to a packet to be sent by the bulk.

       "bulk_fork_threshold"

       Fork threshold of bulk daemon

       Format:
           /"\d+"/

       Default:
           1

       Context:
           site (sympa.conf)

       The minimum number of packets before bulk daemon forks a new worker to increase sending
       rate.

       "bulk_max_count"

       Maximum number of bulk workers

       Format:
           /"\d+"/

       Default:
           3

       Context:
           site (sympa.conf)

       "bulk_lazytime"

       Idle timeout of bulk workers

       Format:
           Number of seconds.

       Default:
           600 (seconds)

       Context:
           site (sympa.conf)

       The number of seconds a bulk worker will remain running without processing a message
       before it spontaneously exits.

       "bulk_sleep"

       Sleep time of bulk workers

       Format:
           Number of seconds.

       Default:
           1 (seconds)

       Context:
           site (sympa.conf)

       The number of seconds a bulk worker sleeps between starting a new loop if it didn't find a
       message to send.

       Keep it small if you want your server to be reactive.

       "bulk_wait_to_fork"

       Interval between checks of packet numbers

       Format:
           Number of seconds.

       Default:
           10 (seconds)

       Context:
           site (sympa.conf)

       Number of seconds a master bulk daemon waits between two packets number checks.

       Keep it small if you expect brutal increases in the message sending load.

       "log_smtp"

       Log invocation of sendmail

       Format:
           "on" - enabled
           "off" - disabled
       Default:
           "off"

       Context:
           domain (robot.conf), site (sympa.conf)

       This can be overwritten by "-m" option for sympa.pl.

       "maxsmtp"

       Maximum number of sendmail processes

       Format:
           /"\d+"/

       Default:
           40

       Context:
           site (sympa.conf)

       Maximum number of simultaneous child processes spawned by Sympa. This is the main load
       control parameter.

       Proposed value is quite low, but you can rise it up to 100, 200 or even 300 with powerful
       systems.

       Example:

         maxsmtp 500

       "nrcpt"

       Maximum number of recipients per call to sendmail

       Format:
           /"\d+"/

       Default:
           25

       Context:
           site (sympa.conf)

       This grouping factor makes it possible for the sendmail processes to optimize the number
       of SMTP sessions for message distribution. If needed, you can limit the number of
       recipients for a particular domain. Check the "nrcpt_by_domain.conf" configuration file.

       "avg"

       Maximum number of different mail domains per call to sendmail

       Format:
           /"\d+"/

       Default:
           10

       Context:
           site (sympa.conf)

   Privileges
       "create_list"

       Who is able to create lists

       Format:
           Name of "create_list" scenario:

           "closed" - closed
           "listmaster" - restricted to listmaster
           "public_listmaster" - anybody by validation by listmaster required
       Default:
           "public_listmaster"

       Context:
           domain (robot.conf), site (sympa.conf)

       Defines who can create lists (or request list creation) by creating new lists or by
       renaming or copying existing lists.

       Example:

         create_list listmaster

       "allow_subscribe_if_pending"

       Allow adding subscribers to a list not open

       Format:
           "on" - enabled
           "off" - disabled
       Default:
           "on"

       Context:
           domain (robot.conf), site (sympa.conf)

       If set to "off", adding subscribers to, or removing subscribers from a list with status
       other than "open" is forbidden.

       "global_remind"

       Who is able to send remind messages over all lists

       Format:
           Name of "global_remind" scenario:

           "listmaster" - only for listmaster
       Default:
           "listmaster"

       Context:
           site (sympa.conf)

       "move_user"

       Who is able to change user's email

       Format:
           Name of "move_user" scenario:

           "auth" - need authentication
           "closed" - impossible
           "listmaster" - listmaster only
       Default:
           "auth"

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2.19b.1 and later.

       "use_blocklist"

       Use blocklist

       Format:
           /"[-.\w]+"/

       Default:
           "send,create_list"

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2.61b.1 and later.

       List of operations separated by comma for which blocklist filter is applied.  Setting this
       parameter to "none" will hide the blocklist feature.

       "info"

       Who can view list information

       Format:
           Name of "info" scenario:

           "conceal" - restricted to subscribers - Silent rejection otherwise.
           "open" - for anyone
           "private" - restricted to subscribers
       Default:
           "open"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       "subscribe"

       Who can subscribe to the list

       Format:
           Name of "subscribe" scenario:

           "auth" - subscription request confirmed
           "auth_notify" - need authentication (notification is sent to owners)
           "auth_notifydkim" - need authentication unless DKIM signature is OK (notification is
           sent to owners)
           "auth_owner" - requires authentication then owner approval
           "auth_ownerdkim" - requires authentication unless DKIM signature is OK, then owner
           approval
           "authdkim" - subscription request confirmed
           "closed" - subscription is impossible
           "open" - for anyone without authentication
           "open_notify" - anyone, notification is sent to list owner
           "open_quiet" - anyone, no welcome message
           "owner" - owners approval
           "smime" - requires S/MIME signed
           "smimeorowner" - requires S/MIME signed or owner approval
       Default:
           "open"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       The subscribe parameter defines the rules for subscribing to the list.

       "add"

       Who can add subscribers

       Format:
           Name of "add" scenario:

           "auth" - restricted to owner with authentication
           "authdkim" - restricted to owner without authentication if DKIM signature is OK.
           "closed" - add impossible
           "owner" - add performed by list owner does not need authentication
           "owner_notify" - add performed by owner does not need authentication (notification)
           "ownerdkim" - add performed by list owner does not need authentication if DKIM
           signature OK
       Default:
           "owner"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       Privilege for adding (ADD command) a subscriber to the list

       "unsubscribe"

       Who can unsubscribe

       Format:
           Name of "unsubscribe" scenario:

           "auth" - need authentication
           "auth_notify" - authentication requested, notification sent to owner
           "auth_notifydkim" - authentication requested unless DKIM signature is OK, notification
           sent to owner
           "authdkim" - need authentication unless DKIM signature is OK
           "closed" - impossible
           "open" - open
           "open_notify" - open with mail confirmation, owner is notified
           "owner" - owners approval
       Default:
           "open"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       This parameter specifies the unsubscription method for the list. Use open_notify or
       auth_notify to allow owner notification of each unsubscribe command.

       "del"

       Who can delete subscribers

       Format:
           Name of "del" scenario:

           "auth" - deletion performed only by list owners, need authentication
           "authdkim" - deletion performed only by list owners, need authentication unless DKIM
           signature is OK
           "closed" - remove subscriber impossible
           "owner" - by owner without authentication
           "owner_notify" - list owners, authentication not needed (notification)
           "ownerdkim" - by owner without authentication if DKIM signature OK
       Default:
           "owner"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       "invite"

       Who can invite people

       Format:
           Name of "invite" scenario:

           "closed" - closed
           "owner" - invite perform by list owner do not need authentication
           "private" - restricted to subscribers
           "public" - public
       Default:
           "private"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       "remind"

       Who can start a remind process

       Format:
           Name of "remind" scenario:

           "listmaster" - listmaster only
           "listmasterdkim" - listmaster only (do not require authentication if DKIM siganture is
           OK)
           "owner" - restricted to list owners
           "ownerdkim" - restricted to list owners (authentication is not required if a DKIM
           signature is OK)
       Default:
           "owner"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       This parameter specifies who is authorized to use the remind command.

       "review"

       Who can review subscribers

       Format:
           Name of "review" scenario:

           "closed" - no one can review
           "listmaster" - listmaster only
           "owner" - only owner (and listmaster)
           "private" - restricted to subscribers
           "public" - anyone can do it!
       Default:
           "owner"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       This parameter specifies who can access the list of members. Since subscriber addresses
       can be abused by spammers, it is strongly recommended that you only authorize owners or
       subscribers to access the subscriber list.

       "owner_domain"

       Required domains for list owners

       Format:
           /"$host( +$host)*"/

       Default:
           None.

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2.23b.3 and later.

       Restrict list ownership to addresses in the specified domains. This can be used to reserve
       list ownership to a group of trusted users from a set of domains associated with an
       organization, while allowing moderators and subscribers from the Internet at large.

       "owner_domain_min"

       Minimum owners in required domains

       Format:
           /"\d+"/

       Default:
           0

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2.23b.3 and later.

       Minimum number of owners for each list must satisfy the owner_domain restriction. The
       default of zero (0) means *all* list owners must match. Setting to 1 requires only one
       list owner to match owner_domain; all other owners can be from any domain. This setting
       can be used to ensure that there is always at least one known contact point for any
       mailing list.

       "default_owner_options"

       (Paragraph) Owner profile

       Single occurrence

       Default profile for the owners of the list.

       "default_owner_options.profile"

       profile

       Format:
           "privileged" - privileged owner
           "normal" - normal owner
       Default:
           "normal"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       "default_owner_options.reception"

       reception mode

       Format:
           "mail" - receive notification email
           "nomail" - no notifications
       Default:
           "mail"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       Mail reception mode.

       "default_owner_options.visibility"

       visibility

       Format:
           "conceal" - concealed from list menu
           "noconceal" - listed on the list menu
       Default:
           "noconceal"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       Visibility of the owner.

       "default_editor_options"

       (Paragraph) Moderator profile

       Single occurrence

       Default profile for the moderators of the list.

       "default_editor_options.reception"

       reception mode

       Format:
           "mail" - receive notification email
           "nomail" - no notifications
       Default:
           "mail"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       Mail reception mode.

       "default_editor_options.visibility"

       visibility

       Format:
           "conceal" - concealed from list menu
           "noconceal" - listed on the list menu
       Default:
           "noconceal"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       Visibility of the moderator.

       "shared_doc"

       (Paragraph) Shared documents

       Single occurrence

       This paragraph defines read and edit access to the shared document repository.

       "shared_doc.d_read"

       Who can view

       Format:
           Name of "d_read" scenario:

           "owner" - restricted to list owners
           "private" - restricted to subscribers
           "private-https" - restricted to subscribers authenticated with user cert
           "public" - public documents
       Default:
           "private"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       "shared_doc.d_edit"

       Who can edit

       Format:
           Name of "d_edit" scenario:

           "editor" - moderated for subscribers
           "owner" - restricted to list owners
           "private" - restricted to subscribers
           "private-https" - restricted to subscribers authenticated with user cert
           "public" - public documents
       Default:
           "owner"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       "shared_doc.quota"

       quota

       Format:
           Number of Kbytes.

       Default:
           None.

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

   Archives
       "ignore_x_no_archive_header_feature"

       Ignore "X-no-archive:" header field

       Format:
           "on" - enabled
           "off" - disabled
       Default:
           "off"

       Context:
           site (sympa.conf)

       Sympa's default behavior is to skip archiving of incoming messages that have an "X-no-
       archive:" header field set. This parameter allows one to change this behavior.

       Example:

         ignore_x_no_archive_header_feature on

       "custom_archiver"

       Custom archiver

       Format:
           /".+"/

       Default:
           None.

       Context:
           site (sympa.conf)

       Activates a custom archiver to use instead of MHonArc. The value of this parameter is the
       absolute path to the executable file.

       Sympa invokes this file with these two arguments:

       --list

       The address of the list including domain part.

       --file

       Absolute path to the message to be archived.

       "process_archive"

       Store distributed messages into archive

       Format:
           "on" - enabled
           "off" - disabled
       Default:
           "off"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2b.1 and later.

       If enabled, distributed messages via lists will be archived. Otherwise archiving is
       disabled.

       Note that even if setting this parameter disabled, past archives will not be removed and
       will be accessible according to access settings by each list.

       "archive"

       (Paragraph) Archives

       Single occurrence

       Privilege for reading mail archives and frequency of archiving.

       Defines who can access the list's web archive.

       "archive.period"

       Deprecated.

       Context:
           list (config)

       "archive.access"

       Deprecated.

       Context:
           list (config)

       Available versions:
           up to 6.2a.43.

       "archive.web_access"

       access right

       Format:
           Name of "archive_web_access" scenario:

           "closed" - closed
           "listmaster" - listmaster
           "owner" - by owner
           "private" - subscribers only
           "public" - public
       Default:
           "closed"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2b.1 and later.

       "archive.mail_access"

       access right by mail commands

       Format:
           Name of "archive_mail_access" scenario:

           "closed" - closed
           "owner" - by owner
           "private" - subscribers only
           "public" - public
       Default:
           "closed"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2b.1 and later.

       "archive.quota"

       quota

       Format:
           Number of Kbytes.

       Default:
           None.

       Context:
           list (config), site (sympa.conf)

       Available versions:
           6.2b.1 and later.

       "archive.max_month"

       Maximum number of month archived

       Format:
           Number of months.

       Default:
           None.

       Context:
           list (config)

       Available versions:
           6.2b.1 and later.

       "archive_crypted_msg"

       Archive encrypted mails as cleartext

       Format:
           "original" - original messages
           "decrypted" - decrypted messages
       Default:
           "original"

       Context:
           list (config)

       "web_archive_spam_protection"

       Protect web archive against spam harvesters

       Format:
           "cookie" - use HTTP cookie
           "javascript" - use JavaScript
           "at" - replace @ characters
           "concealed" - never show address
           "none" - do nothing
       Default:
           "cookie"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       The same as "spam_protection", but restricted to the web archive.

       In addition to it:

       cookie: users must submit a small form in order to receive a cookie before browsing the
       web archive.

       concealed: e-mail addresses will never be displayed.

   Bounces
       "bounce"

       (Paragraph) Bounces management

       Single occurrence

       "bounce.warn_rate"

       warn rate

       Format:
           Number of %.

       Default:
           30 (%)

       Context:
           list (config), site (sympa.conf)

       The list owner receives a warning whenever a message is distributed and the number
       (percentage) of bounces exceeds this value.

       "bounce.halt_rate"

       Deprecated.

       Context:
           list (config), site (sympa.conf)

       "bouncers_level1"

       (Paragraph) Management of bouncers, 1st level

       Single occurrence

       Level 1 is the lower level of bouncing users

       "bouncers_level1.rate"

       threshold

       Format:
           Number of points.

       Default:
           45 (points)

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       Each bouncing user have a score (from 0 to 100).

       This parameter defines a lower limit for each category of bouncing users.For example,
       level 1 begins from 45 to level_2_treshold.

       "bouncers_level1.action"

       action for this population

       Format:
           "remove_bouncers" - remove bouncing users
           "notify_bouncers" - send notify to bouncing users
           "none" - do nothing
       Default:
           "notify_bouncers"

       Context:
           list (config)

       This parameter defines which task is automatically applied on level 1 bouncers.

       "bouncers_level1.notification"

       notification

       Format:
           "none" - do nothing
           "owner" - owner
           "listmaster" - listmaster
       Default:
           "owner"

       Context:
           list (config)

       When automatic task is executed on level 1 bouncers, a notification email can be send to
       listowner or listmaster.

       "bouncers_level2"

       (Paragraph) Management of bouncers, 2nd level

       Single occurrence

       Level 2 is the highest level of bouncing users

       "bouncers_level2.rate"

       threshold

       Format:
           Number of points.

       Default:
           75 (points)

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       Each bouncing user have a score (from 0 to 100).

       This parameter defines the score range defining each category of bouncing users.For
       example, level 2 is for users with a score between 80 and 100.

       "bouncers_level2.action"

       action for this population

       Format:
           "remove_bouncers" - remove bouncing users
           "notify_bouncers" - send notify to bouncing users
           "none" - do nothing
       Default:
           "remove_bouncers"

       Context:
           list (config)

       This parameter defines which task is automatically applied on level 2 bouncers.

       "bouncers_level2.notification"

       notification

       Format:
           "none" - do nothing
           "owner" - owner
           "listmaster" - listmaster
       Default:
           "owner"

       Context:
           list (config)

       When automatic task is executed on level 2 bouncers, a notification email can be send to
       listowner or listmaster.

       "verp_rate"

       percentage of list members in VERP mode

       Format:
           "100%" - 100% - always
           "50%" - 50%
           "33%" - 33%
           "25%" - 25%
           "20%" - 20%
           "10%" - 10%
           "5%" - 5%
           "2%" - 2%
           "0%" - 0% - never
       Default:
           "0%"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       Uses variable envelope return path (VERP) to detect bouncing subscriber addresses.

       0%: VERP is never used.

       100%: VERP is always in use.

       VERP requires address with extension to be supported by MTA. If tracking is enabled for a
       list or a message, VERP is applied for 100% of subscribers.

       "tracking"

       (Paragraph) Message tracking feature

       Single occurrence

       "tracking.delivery_status_notification"

       tracking message by delivery status notification

       Format:
           "on" - enabled
           "off" - disabled
       Default:
           "off"

       Context:
           list (config), site (sympa.conf)

       "tracking.message_disposition_notification"

       tracking message by message disposition notification

       Format:
           "on" - enabled
           "on_demand" - on demand
           "off" - disabled
       Default:
           "off"

       Context:
           list (config), site (sympa.conf)

       Available versions:
           6.2a.41 and later.

       "tracking.tracking"

       who can view message tracking

       Format:
           Name of "tracking" scenario:

           "owner" - only owner (and listmaster)
           "private" - restricted to subscribers
       Default:
           "owner"

       Context:
           list (config), site (sympa.conf)

       Available versions:
           6.2a.3 and later.

       "tracking.retention_period"

       Tracking datas are removed after this number of days

       Format:
           Number of days.

       Default:
           90 (days)

       Context:
           list (config), site (sympa.conf)

       Available versions:
           6.2a.3 and later.

       "tracking.message_delivery_notification"

       See "message_disposition_notification".

       Context:
           list (config)

       Available versions:
           6.2a.0 to 6.2a.40.

       "welcome_return_path"

       Welcome return-path

       Format:
           "unique" - bounce management
           "owner" - owner
       Default:
           "owner"

       Context:
           list (config), site (sympa.conf)

       If set to unique, the welcome message is sent using a unique return path in order to
       remove the subscriber immediately in the case of a bounce.

       "remind_return_path"

       Return-path of the REMIND command

       Format:
           "unique" - bounce management
           "owner" - owner
       Default:
           "owner"

       Context:
           list (config), site (sympa.conf)

       Same as welcome_return_path, but applied to remind messages.

       "expire_bounce_task"

       Task for expiration of old bounces

       Format:
           /"\w+"/

       Default:
           "daily"

       Context:
           site (sympa.conf)

       This task resets bouncing information for addresses not bouncing in the last 10 days after
       the latest message distribution.

       "purge_orphan_bounces_task"

       Task for cleaning invalidated bounces

       Format:
           /"\w+"/

       Default:
           "monthly"

       Context:
           site (sympa.conf)

       This task deletes bounce information for unsubscribed users.

       "eval_bouncers_task"

       Task for updating bounce scores

       Format:
           /"\w+"/

       Default:
           "daily"

       Context:
           site (sympa.conf)

       This task scans all bouncing users for all lists, and updates "bounce_score_subscriber"
       field in "subscriber_table" table. The scores may be used for management of bouncers.

       "process_bouncers_task"

       Task for management of bouncers

       Format:
           /"\w+"/

       Default:
           "weekly"

       Context:
           site (sympa.conf)

       This task executes actions on bouncing users configured by each list, according to their
       scores.

       "purge_tables_task"

       Task for cleaning tables

       Format:
           /"\w+"/

       Default:
           "daily"

       Context:
           site (sympa.conf)

       This task cleans old tracking information from "notification_table" table.

       "minimum_bouncing_count"

       Minimum number of bounces

       Format:
           /"\d+"/

       Default:
           10

       Context:
           site (sympa.conf)

       The minimum number of bounces received to update bounce score of a user.

       "minimum_bouncing_period"

       Minimum bouncing period

       Format:
           Number of days.

       Default:
           10 (days)

       Context:
           site (sympa.conf)

       The minimum period for which bouncing lasted to update bounce score of a user.

       "bounce_delay"

       Delay of bounces

       Format:
           Number of days.

       Default:
           0 (days)

       Context:
           site (sympa.conf)

       Average time for a bounce sent back to mailing list server after a post was sent to a
       list. Usually bounces are sent back on the same day as the original message.

       "bounce_email_prefix"

       Prefix of VERP return address

       Format:
           /"\S+"/

       Default:
           "bounce"

       Context:
           site (sympa.conf)

       The prefix to consist the return-path of probe messages used for bounce management, when
       variable envelope return path (VERP) is enabled. VERP requires address with extension to
       be supported by MTA.

       If you change the default value, you must modify the mail aliases too.

       "return_path_suffix"

       Suffix of list return address

       Format:
           /"\S+"/

       Default:
           "-owner"

       Context:
           site (sympa.conf)

       The suffix appended to the list name to form the return-path of messages distributed
       through the list. This address will receive all non-delivery reports (also called
       bounces).

   Loop prevention
       "loop_command_max"

       Maximum number of responses to command message

       Format:
           /"\d+"/

       Default:
           200

       Context:
           site (sympa.conf)

       The maximum number of command reports sent to an email address. Messages are stored in
       "bad" subdirectory of incoming message spool, and reports are not longer sent.

       "loop_command_sampling_delay"

       Delay before counting responses to command message

       Format:
           Number of seconds.

       Default:
           3600 (seconds)

       Context:
           site (sympa.conf)

       This parameter defines the delay in seconds before decrementing the counter of reports
       sent to an email address.

       "loop_command_decrease_factor"

       Decrementing factor of responses to command message

       Format:
           /"[.\d]+"/

       Default:
           0.5

       Context:
           site (sympa.conf)

       The decrementation factor (from 0 to 1), used to determine the new report counter after
       expiration of the delay.

       "msgid_table_cleanup_ttl"

       Expiration period of message ID table

       Format:
           Number of seconds.

       Default:
           86400 (seconds)

       Context:
           site (sympa.conf)

       Expiration period of entries in the table maintained by sympa_msg.pl daemon to prevent
       delivery of duplicate messages caused by loop.

       "msgid_table_cleanup_frequency"

       Cleanup interval of message ID table

       Format:
           Number of seconds.

       Default:
           3600 (seconds)

       Context:
           site (sympa.conf)

       Interval between cleanups of the table maintained by sympa_msg.pl daemon to prevent
       delivery of duplicate messages caused by loop.

   Automatic lists
       "automatic_list_feature"

       Automatic list

       Format:
           "on" - enabled
           "off" - disabled
       Default:
           "off"

       Context:
           domain (robot.conf), site (sympa.conf)

       "automatic_list_removal"

       Remove empty automatic list

       Format:
           "none" - do nothing
           "if_empty" - if_empty
       Default:
           "none"

       Context:
           domain (robot.conf), site (sympa.conf)

       If set to "if_empty", then Sympa will remove automatically created mailing lists just
       after their creation, if they contain no list member.

       Example:

         automatic_list_removal if_empty

       "automatic_list_creation"

       Who is able to create automatic list

       Format:
           Name of "automatic_list_creation" scenario:

           "family_owner" - Restricted to people subscribed to the list of family owners.
           "listmaster" - restricted to listmaster
           "public" - anybody. Be sure you know what you are doing
       Default:
           "public"

       Context:
           domain (robot.conf), site (sympa.conf)

       "automatic_list_families"

       Definition of automatic list families

       Format:
           /".+"/

       Default:
           None.

       Context:
           domain (robot.conf), site (sympa.conf)

       Defines the families the automatic lists are based on. It is a character string structured
       as follows:

       * each family is separated from the other by a semicolon (;)

       * inside a family definition, each field is separated from the other by a colon (:)

       * each field has the structure: "<field name>=<field value>"

       Basically, each time Sympa uses the automatic lists families, the values defined in this
       parameter will be available in the family object.

       * for scenarios: [family->name]

       * for templates: [% family.name %]

       Example:

         automatic_list_families name=family_one:prefix=f1:display=My automatic lists:prefix_separator=+:classes separator=-:family_owners_list=alist@domain.tld;name=family_two:prefix=f2:display=My other automatic lists:prefix_separator=+:classes separator=-:family_owners_list=anotherlist@domain.tld;

       "parsed_family_files"

       Parsed files for families

       Format:
           /"[-.\w]+"/

       Default:
           "message_header,message_header.mime,message_footer,message_footer.mime,info"

       Context:
           domain (robot.conf), site (sympa.conf)

       comma-separated list of files that will be parsed by Sympa when instantiating a family (no
       space allowed in file names)

       "family_signoff"

       Global unsubscription

       Format:
           Name of "family_signoff" scenario:

           "auth" - need authentication
           "closed" - impossible
       Default:
           "auth"

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2.54 and later.

   Tag based spam filtering
       "antispam_feature"

       Tag based spam filtering

       Format:
           "on" - enabled
           "off" - disabled
       Default:
           "off"

       Context:
           domain (robot.conf), site (sympa.conf)

       "antispam_tag_header_name"

       Header field to tag spams

       Format:
           /"\S+"/

       Default:
           "X-Spam-Status"

       Context:
           domain (robot.conf), site (sympa.conf)

       If a spam filter (like spamassassin or j-chkmail) add a header field to tag spams, name of
       this header field (example X-Spam-Status)

       "antispam_tag_header_spam_regexp"

       Regular expression to check header field to tag spams

       Format:
           /".+"/

       Default:
           "^\s*Yes"

       Context:
           domain (robot.conf), site (sympa.conf)

       Regular expression applied on this header to verify message is a spam (example Yes)

       "antispam_tag_header_ham_regexp"

       Regular expression to determine spam or ham.

       Format:
           /".+"/

       Default:
           "^\s*No"

       Context:
           domain (robot.conf), site (sympa.conf)

       Regular expression applied on this header field to verify message is NOT a spam (example
       No)

       "spam_status"

       Name of header field to inform

       Format:
           Name of "spam_status" scenario:

           "x-spam-status" - test X-Spam-Status header
       Default:
           "x-spam-status"

       Context:
           domain (robot.conf), site (sympa.conf)

       Messages are supposed to be filtered by an spam filter that adds them one or more headers.
       This parameter is used to select a special scenario in order to decide the message's spam
       status: ham, spam or unsure. This parameter replaces antispam_tag_header_name,
       antispam_tag_header_spam_regexp and antispam_tag_header_ham_regexp.

   Directories
       "home"

       List home

       Format:
           /".+"/

       Default:
           $EXPLDIR

       Context:
           site (sympa.conf)

       Base directory of list configurations.

       "etc"

       Directory for configuration files

       Format:
           /".+"/

       Default:
           $SYSCONFDIR

       Context:
           site (sympa.conf)

       Base directory of global configuration (except "sympa.conf").

       "spool"

       Base directory of spools

       Format:
           /".+"/

       Default:
           $SPOOLDIR

       Context:
           site (sympa.conf)

       Base directory of all spools which are created at runtime. This directory must be writable
       by Sympa user.

       "queue"

       Directory for message incoming spool

       Format:
           /".+"/

       Default:
           "$SPOOLDIR/msg"

       Context:
           site (sympa.conf)

       This spool is used both by "queue" program and "sympa_msg.pl" daemon.

       "queuemod"

       Directory for moderation spool

       Format:
           /".+"/

       Default:
           "$SPOOLDIR/moderation"

       Context:
           site (sympa.conf)

       "queuedigest"

       Directory for digest spool

       Format:
           /".+"/

       Default:
           "$SPOOLDIR/digest"

       Context:
           site (sympa.conf)

       "queueauth"

       Directory for held message spool

       Format:
           /".+"/

       Default:
           "$SPOOLDIR/auth"

       Context:
           site (sympa.conf)

       This parameter is named such by historical reason.

       "queueoutgoing"

       Directory for archive spool

       Format:
           /".+"/

       Default:
           "$SPOOLDIR/outgoing"

       Context:
           site (sympa.conf)

       This parameter is named such by historical reason.

       "queuesubscribe"

       Directory for held request spool

       Format:
           /".+"/

       Default:
           "$SPOOLDIR/subscribe"

       Context:
           site (sympa.conf)

       This parameter is named such by historical reason.

       "queuetopic"

       Directory for topic spool

       Format:
           /".+"/

       Default:
           "$SPOOLDIR/topic"

       Context:
           site (sympa.conf)

       "queuebounce"

       Directory for bounce incoming spool

       Format:
           /".+"/

       Default:
           "$SPOOLDIR/bounce"

       Context:
           site (sympa.conf)

       This spool is used both by "bouncequeue" program and "bounced.pl" daemon.

       "queuetask"

       Directory for task spool

       Format:
           /".+"/

       Default:
           "$SPOOLDIR/task"

       Context:
           site (sympa.conf)

       "queueautomatic"

       Directory for automatic list creation spool

       Format:
           /".+"/

       Default:
           "$SPOOLDIR/automatic"

       Context:
           site (sympa.conf)

       This spool is used both by "familyqueue" program and "sympa_automatic.pl" daemon.

       "queuebulk"

       Directory for message outgoing spool

       Format:
           /".+"/

       Default:
           "$SPOOLDIR/bulk"

       Context:
           site (sympa.conf)

       Available versions:
           6.2a.41 and later.

       This parameter is named such by historical reason.

       "tmpdir"

       Temporary directory used by external programs such as virus scanner. Also, outputs to
       daemons' standard error are redirected to the files under this directory.

       Format:
           /".+"/

       Default:
           "$SPOOLDIR/tmp"

       Context:
           site (sympa.conf)

       "viewmail_dir"

       Directory to cache formatted messages

       Format:
           /".+"/

       Default:
           "$SPOOLDIR/viewmail"

       Context:
           site (sympa.conf)

       Base directory path of directories where HTML view of messages are cached.

       "bounce_path"

       Directory for storing bounces

       Format:
           /".+"/

       Default:
           $BOUNCEDIR

       Context:
           site (sympa.conf)

       The directory where bounced.pl daemon will store the last bouncing message for each user.
       A message is stored in the file: <bounce_path>/<list name>@<mail domain name>/<email
       address>, or, if tracking is enabled: <bounce_path>/<list name>@<mail domain name>/<email
       address>_<envelope ID>.

       Users can access to these messages using web interface in the bounce management page.

       Don't confuse with "queuebounce" parameter which defines the spool where incoming error
       reports are stored and picked by bounced.pl daemon.

       "arc_path"

       Directory for storing archives

       Format:
           /".+"/

       Default:
           $ARCDIR

       Context:
           domain (robot.conf), site (sympa.conf)

       Where to store HTML archives. This parameter is used by the "archived.pl" daemon. It is a
       good idea to install the archive outside the web document hierarchy to prevent overcoming
       of WWSympa's access control.

       "purge_spools_task"

       Task for cleaning spools

       Format:
           /"\w+"/

       Default:
           "daily"

       Context:
           site (sympa.conf)

       Available versions:
           6.2b.4 and later.

       This task cleans old content in spools.

       "clean_delay_queue"

       Max age of incoming bad messages

       Format:
           Number of days.

       Default:
           7 (days)

       Context:
           site (sympa.conf)

       Number of days "bad" messages are kept in message incoming spool (as specified by "queue"
       parameter). Sympa keeps messages rejected for various reasons (badly formatted, looping
       etc.).

       "clean_delay_queueoutgoing"

       Max age of bad messages for archives

       Format:
           Number of days.

       Default:
           7 (days)

       Context:
           site (sympa.conf)

       Number of days "bad" messages are kept in message archive spool (as specified by
       "queueoutgoing" parameter). Sympa keeps messages rejected for various reasons (unable to
       create archive directory, to copy file etc.).

       "clean_delay_queuebounce"

       Max age of bad bounce messages

       Format:
           Number of days.

       Default:
           7 (days)

       Context:
           site (sympa.conf)

       Number of days "bad" messages are kept in bounce spool (as specified by "queuebounce"
       parameter). Sympa keeps messages rejected for various reasons (unknown original sender,
       unknown report type).

       "clean_delay_queueauth"

       Max age of held messages

       Format:
           Number of days.

       Default:
           30 (days)

       Context:
           site (sympa.conf)

       Number of days messages are kept in held message spool (as specified by "queueauth"
       parameter). Beyond this deadline, messages that have not been confirmed are deleted.

       "clean_delay_queuesubscribe"

       Max age of held requests

       Format:
           Number of days.

       Default:
           30 (days)

       Context:
           site (sympa.conf)

       Number of days requests are kept in held request spool (as specified by "queuesubscribe"
       parameter). Beyond this deadline, requests that have not been validated nor declined are
       deleted.

       "clean_delay_queuetopic"

       Max age of tagged topics

       Format:
           Number of days.

       Default:
           30 (days)

       Context:
           site (sympa.conf)

       Number of days (automatically or manually) tagged topics are kept in topic spool (as
       specified by "queuetopic" parameter). Beyond this deadline, tagging is forgotten.

       "clean_delay_queueautomatic"

       Max age of incoming bad messages in automatic list creation spool

       Format:
           Number of days.

       Default:
           10 (days)

       Context:
           site (sympa.conf)

       Number of days "bad" messages are kept in automatic list creation spool (as specified by
       "queueautomatic" parameter). Sympa keeps messages rejected for various reasons (badly
       formatted, looping etc.).

       "clean_delay_queuebulk"

       Max age of outgoing bad messages

       Format:
           Number of days.

       Default:
           7 (days)

       Context:
           site (sympa.conf)

       Number of days "bad" messages are kept in message outgoing spool (as specified by
       "queuebulk" parameter). Sympa keeps messages rejected for various reasons (failed
       personalization, bad configuration on MTA etc.).

       "clean_delay_queuedigest"

       Max age of bad messages in digest spool

       Format:
           Number of days.

       Default:
           14 (days)

       Context:
           site (sympa.conf)

       Available versions:
           6.2.6 and later.

       Number of days "bad" messages are kept in digest spool (as specified by "queuedigest"
       parameter). Sympa keeps messages rejected for various reasons (syntax errors in
       "digest.tt2" template etc.).

       "clean_delay_tmpdir"

       Max age of temporary files

       Format:
           Number of days.

       Default:
           7 (days)

       Context:
           site (sympa.conf)

       Number of days files in temporary directory (as specified by "tmpdir" parameter),
       including standard error logs, are kept.

   S/MIME and TLS
       S/MIME authentication, decryption and re-encryption. It requires these external modules:
       Crypt-OpenSSL-X509 and Crypt-SMIME.

       TLS client authentication. It requires an external module: IO-Socket-SSL.

       "cafile"

       File containing trusted CA certificates

       Format:
           /".+"/

       Default:
           None.

       Context:
           site (sympa.conf)

       Available versions:
           3.3.6b.1 and later.

       This can be used alternatively and/or additionally to "capath".

       "capath"

       Directory containing trusted CA certificates

       Format:
           /".+"/

       Default:
           None.

       Context:
           site (sympa.conf)

       Available versions:
           3.3.6b.1 and later.

       CA certificates in this directory are used for client authentication.

       The certificates need to have names including hash of subject, or symbolic links to them
       with such names. The links may be created by using "c_rehash" script bundled in OpenSSL.

       "key_passwd"

       Password used to crypt lists private keys

       Format:
           The value to be concealed.

       Default:
           None.

       Context:
           site (sympa.conf)

       If not defined, Sympa assumes that list private keys are not encrypted.

       Example:

         key_passwd your_password

       "ssl_cert_dir"

       Directory containing user certificates

       Format:
           /".+"/

       Default:
           "$EXPLDIR/X509-user-certs"

       Context:
           site (sympa.conf)

   Data sources setup
       Including subscribers, owners and moderators from data sources. Appropriate database
       driver (DBD) modules are required: DBD-CSV, DBD-mysql, DBD-ODBC, DBD-Oracle, DBD-Pg, DBD-
       SQLite and/or Net-LDAP. And also, if secure connection (LDAPS) to LDAP server is required:
       IO-Socket-SSL.

       "inclusion_notification_feature"

       Notify subscribers when they are included from a data source?

       Format:
           "on" - enabled
           "off" - disabled
       Default:
           "off"

       Context:
           list (config), site (sympa.conf)

       "member_include"

       (Paragraph) Subscribers defined in an external data source

       Multiple occurrences allowed

       "member_include.source"

       the data source

       Format:
           /"[\w-]+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       "member_include.source_parameters"

       data source parameters

       Format:
           /".*"/

       Default:
           None.

       Context:
           list (config)

       "member_include.reception"

       reception mode

       Format:
           Reception mode of list member.

       Default:
           None.

       Context:
           list (config)

       Available versions:
           6.2.67b.2 and later.

       Mail reception mode.

       "member_include.visibility"

       visibility

       Format:
           Visibility mode of list member.

       Default:
           None.

       Context:
           list (config)

       Available versions:
           6.2.67b.2 and later.

       Visibility of the subscriber.

       "owner_include"

       (Paragraph) Owners defined in an external data source

       Multiple occurrences allowed

       "owner_include.source"

       the data source

       Format:
           /"[\w-]+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       "owner_include.source_parameters"

       data source parameters

       Format:
           /".*"/

       Default:
           None.

       Context:
           list (config)

       Available versions:
           5.0a and later.

       "owner_include.profile"

       profile

       Format:
           "privileged" - privileged owner
           "normal" - normal owner
       Default:
           None.

       Context:
           list (config)

       "owner_include.reception"

       reception mode

       Format:
           "mail" - receive notification email
           "nomail" - no notifications
       Default:
           None.

       Context:
           list (config)

       "owner_include.visibility"

       visibility

       Format:
           "conceal" - concealed from list menu
           "noconceal" - listed on the list menu
       Default:
           None.

       Context:
           list (config)

       Available versions:
           5.4a.6 and later.

       "editor_include"

       (Paragraph) Moderators defined in an external data source

       Multiple occurrences allowed

       "editor_include.source"

       the data source

       Format:
           /"[\w-]+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       "editor_include.source_parameters"

       data source parameters

       Format:
           /".*"/

       Default:
           None.

       Context:
           list (config)

       Available versions:
           5.0a and later.

       "editor_include.reception"

       reception mode

       Format:
           "mail" - receive notification email
           "nomail" - no notifications
       Default:
           None.

       Context:
           list (config)

       "editor_include.visibility"

       visibility

       Format:
           "conceal" - concealed from list menu
           "noconceal" - listed on the list menu
       Default:
           None.

       Context:
           list (config)

       Available versions:
           5.4a.6 and later.

       "sql_fetch_timeout"

       Timeout for fetch of include_sql_query

       Format:
           Number of seconds.

       Default:
           300 (seconds)

       Context:
           list (config), site (sympa.conf)

       Available versions:
           6.2a.0 and later.

       "include_file"

       File inclusion

       Format:
           Multiple occurrences allowed.

           /"\S+"/

       Default:
           None.

       Context:
           list (config)

       Include subscribers from this file.  The file should contain one e-mail address per line
       (lines beginning with a "#" are ignored).

       "include_remote_file"

       (Paragraph) Remote file inclusion

       Multiple occurrences allowed

       "include_remote_file.name"

       short name for this source

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       "include_remote_file.url"

       data location URL

       Format:
           /".+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       "include_remote_file.user"

       remote user

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       "include_remote_file.passwd"

       remote password

       Format:
           The value to be concealed.

       Default:
           None.

       Context:
           list (config)

       "include_remote_file.timeout"

       idle timeout

       Format:
           Number of seconds.

       Default:
           180 (seconds)

       Context:
           list (config)

       "include_remote_file.ssl_version"

       SSL version

       Format:
           "ssl_any" - any versions
           "sslv2" - SSL version 2
           "sslv3" - SSL version 3
           "tlsv1" - TLS version 1
           "tlsv1_1" - TLS version 1.1
           "tlsv1_2" - TLS version 1.2
           "tlsv1_3" - TLS version 1.3
       Default:
           "ssl_any"

       Context:
           list (config)

       "include_remote_file.ssl_ciphers"

       SSL ciphers used

       Format:
           /".+"/

       Default:
           "ALL"

       Context:
           list (config)

       "include_remote_file.ca_verify"

       Certificate verification

       Format:
           "none" - do nothing
           "optional" - optional
           "required" - required
       Default:
           "none"

       Context:
           list (config)

       "include_remote_file.nosync_time_ranges"

       Time ranges when inclusion is not allowed

       Format:
           /$time_ranges/

       Default:
           None.

       Context:
           list (config)

       "include_sympa_list"

       (Paragraph) List inclusion

       Multiple occurrences allowed

       Include subscribers from other list. All subscribers of list listname become subscribers
       of the current list. You may include as many lists as required, using one
       include_sympa_list paragraph for each included list. Any list at all may be included; you
       may therefore include lists which are also defined by the inclusion of other lists. Be
       careful, however, not to include list A in list B and then list B in list A, since this
       will give rise to an infinite loop.

       "include_sympa_list.name"

       short name for this source

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       "include_sympa_list.listname"

       list name to include

       Format:
           /"$listname(\@$host)?"/

       Default:
           None, mandatory.

       Context:
           list (config)

       "include_sympa_list.filter"

       filter definition

       Format:
           /".*"/

       Default:
           None.

       Context:
           list (config)

       "include_sympa_list.nosync_time_ranges"

       Time ranges when inclusion is not allowed

       Format:
           /$time_ranges/

       Default:
           None.

       Context:
           list (config)

       "include_remote_sympa_list"

       (Paragraph) remote list inclusion

       Multiple occurrences allowed

       Sympa can contact another Sympa service using HTTPS to fetch a remote list in order to
       include each member of a remote list as subscriber. You may include as many lists as
       required, using one include_remote_sympa_list paragraph for each included list. Be
       careful, however, not to give rise to an infinite loop resulting from cross includes.

       For this operation, one Sympa site acts as a server while the other one acs as client. On
       the server side, the only setting needed is to give permission to the remote Sympa to
       review the list. This is controlled by the review scenario.

       "include_remote_sympa_list.name"

       short name for this source

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       "include_remote_sympa_list.url"

       data location URL

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       Available versions:
           6.2.45b.1 and later.

       "include_remote_sympa_list.user"

       remote user

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       Available versions:
           6.2.45b.1 and later.

       "include_remote_sympa_list.passwd"

       remote password

       Format:
           The value to be concealed.

       Default:
           None.

       Context:
           list (config)

       Available versions:
           6.2.45b.1 and later.

       "include_remote_sympa_list.host"

       remote host

       Format:
           /$host/

       Default:
           None, mandatory.

       Context:
           list (config)

       obsoleted.  Use "data location URL".

       "include_remote_sympa_list.port"

       remote port

       Format:
           /"\d+"/

       Default:
           443

       Context:
           list (config)

       obsoleted.  Use "data location URL".

       "include_remote_sympa_list.path"

       remote path of sympa list dump

       Format:
           /"\S+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       obsoleted.  Use "data location URL".

       "include_remote_sympa_list.cert"

       Deprecated.

       Context:
           list (config)

       Available versions:
           up to 6.2.44.

       "include_remote_sympa_list.timeout"

       idle timeout

       Format:
           Number of seconds.

       Default:
           180 (seconds)

       Context:
           list (config)

       Available versions:
           6.2.45b.1 and later.

       "include_remote_sympa_list.ssl_version"

       SSL version

       Format:
           "ssl_any" - any versions
           "sslv2" - SSL version 2
           "sslv3" - SSL version 3
           "tlsv1" - TLS version 1
           "tlsv1_1" - TLS version 1.1
           "tlsv1_2" - TLS version 1.2
           "tlsv1_3" - TLS version 1.3
       Default:
           "ssl_any"

       Context:
           list (config)

       Available versions:
           6.2.45b.1 and later.

       "include_remote_sympa_list.ssl_ciphers"

       SSL ciphers used

       Format:
           /".+"/

       Default:
           "ALL"

       Context:
           list (config)

       Available versions:
           6.2.45b.1 and later.

       "include_remote_sympa_list.ca_verify"

       Certificate verification

       Format:
           "none" - do nothing
           "optional" - optional
           "required" - required
       Default:
           "optional"

       Context:
           list (config)

       Available versions:
           6.2.45b.1 and later.

       "include_remote_sympa_list.nosync_time_ranges"

       Time ranges when inclusion is not allowed

       Format:
           /$time_ranges/

       Default:
           None.

       Context:
           list (config)

       "include_ldap_query"

       (Paragraph) LDAP query inclusion

       Multiple occurrences allowed

       This paragraph defines parameters for a query returning a list of subscribers. This
       feature requires the Net::LDAP (perlldap) PERL module.

       "include_ldap_query.name"

       short name for this source

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       "include_ldap_query.host"

       remote host

       Format:
           /$multiple_host_or_url/

       Default:
           None, mandatory.

       Context:
           list (config)

       "include_ldap_query.port"

       Deprecated.

       Context:
           list (config)

       "include_ldap_query.use_tls"

       use TLS (formerly SSL)

       Format:
           "starttls" - use STARTTLS
           "ldaps" - use LDAPS (LDAP over TLS)
           "none" - do nothing
       Default:
           "none"

       Context:
           list (config)

       Available versions:
           6.2.15 and later.

       "include_ldap_query.ssl_version"

       SSL version

       Format:
           "sslv2" - SSL version 2
           "sslv3" - SSL version 3
           "tlsv1" - TLS version 1
           "tlsv1_1" - TLS version 1.1
           "tlsv1_2" - TLS version 1.2
           "tlsv1_3" - TLS version 1.3
       Default:
           "tlsv1"

       Context:
           list (config)

       "include_ldap_query.ssl_ciphers"

       SSL ciphers used

       Format:
           /".+"/

       Default:
           "ALL"

       Context:
           list (config)

       "include_ldap_query.ca_verify"

       Certificate verification

       Format:
           "none" - do nothing
           "optional" - optional
           "required" - required
       Default:
           "required"

       Context:
           list (config)

       Available versions:
           6.2.13 and later.

       "include_ldap_query.bind_dn"

       remote user

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       Available versions:
           6.2.57b.1 and later.

       "include_ldap_query.bind_password"

       remote password

       Format:
           The value to be concealed.

       Default:
           None.

       Context:
           list (config)

       Available versions:
           6.2.57b.1 and later.

       "include_ldap_query.suffix"

       suffix

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       "include_ldap_query.scope"

       search scope

       Format:
           "base" - base
           "one" - one level
           "sub" - subtree
       Default:
           "sub"

       Context:
           list (config)

       "include_ldap_query.timeout"

       connection timeout

       Format:
           Number of seconds.

       Default:
           30 (seconds)

       Context:
           list (config)

       "include_ldap_query.filter"

       filter

       Format:
           /".+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       "include_ldap_query.attrs"

       extracted attribute

       Format:
           /"$ldap_attrdesc(\s*,\s*$ldap_attrdesc)?"/

       Default:
           "mail"

       Context:
           list (config)

       "include_ldap_query.select"

       selection (if multiple)

       Format:
           "all" - all
           "first" - first entry
           "regex" - entries matching regular expression
       Default:
           "first"

       Context:
           list (config)

       "include_ldap_query.regex"

       regular expression

       Format:
           /".+"/

       Default:
           ""

       Context:
           list (config)

       "include_ldap_query.nosync_time_ranges"

       Time ranges when inclusion is not allowed

       Format:
           /$time_ranges/

       Default:
           None.

       Context:
           list (config)

       Available versions:
           6.2a.16 and later.

       "include_ldap_query.passwd"

       See "bind_password".

       Context:
           list (config)

       Available versions:
           up to 6.2.56.

       "include_ldap_query.use_ssl"

       See "use_tls".

       Context:
           list (config)

       Available versions:
           5.3a.2 to 6.2.14.

       "include_ldap_query.user"

       See "bind_dn".

       Context:
           list (config)

       Available versions:
           up to 6.2.56.

       "include_ldap_2level_query"

       (Paragraph) LDAP 2-level query inclusion

       Multiple occurrences allowed

       This paragraph defines parameters for a two-level query returning a list of subscribers.
       Usually the first-level query returns a list of DNs and the second-level queries convert
       the DNs into e-mail addresses. This feature requires the Net::LDAP (perlldap) PERL module.

       "include_ldap_2level_query.name"

       short name for this source

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       "include_ldap_2level_query.host"

       remote host

       Format:
           /$multiple_host_or_url/

       Default:
           None, mandatory.

       Context:
           list (config)

       "include_ldap_2level_query.port"

       Deprecated.

       Context:
           list (config)

       "include_ldap_2level_query.use_tls"

       use TLS (formerly SSL)

       Format:
           "starttls" - use STARTTLS
           "ldaps" - use LDAPS (LDAP over TLS)
           "none" - do nothing
       Default:
           "none"

       Context:
           list (config)

       Available versions:
           6.2.15 and later.

       "include_ldap_2level_query.ssl_version"

       SSL version

       Format:
           "sslv2" - SSL version 2
           "sslv3" - SSL version 3
           "tlsv1" - TLS version 1
           "tlsv1_1" - TLS version 1.1
           "tlsv1_2" - TLS version 1.2
           "tlsv1_3" - TLS version 1.3
       Default:
           "tlsv1"

       Context:
           list (config)

       "include_ldap_2level_query.ssl_ciphers"

       SSL ciphers used

       Format:
           /".+"/

       Default:
           "ALL"

       Context:
           list (config)

       "include_ldap_2level_query.ca_verify"

       Certificate verification

       Format:
           "none" - do nothing
           "optional" - optional
           "required" - required
       Default:
           "required"

       Context:
           list (config)

       Available versions:
           6.2.13 and later.

       "include_ldap_2level_query.bind_dn"

       remote user

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       Available versions:
           6.2.57b.1 and later.

       "include_ldap_2level_query.bind_password"

       remote password

       Format:
           The value to be concealed.

       Default:
           None.

       Context:
           list (config)

       Available versions:
           6.2.57b.1 and later.

       "include_ldap_2level_query.suffix1"

       first-level suffix

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       "include_ldap_2level_query.scope1"

       first-level search scope

       Format:
           "base" - base
           "one" - one level
           "sub" - subtree
       Default:
           "sub"

       Context:
           list (config)

       "include_ldap_2level_query.timeout1"

       first-level connection timeout

       Format:
           Number of seconds.

       Default:
           30 (seconds)

       Context:
           list (config)

       "include_ldap_2level_query.filter1"

       first-level filter

       Format:
           /".+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       "include_ldap_2level_query.attrs1"

       first-level extracted attribute

       Format:
           /$ldap_attrdesc/

       Default:
           None.

       Context:
           list (config)

       "include_ldap_2level_query.select1"

       first-level selection

       Format:
           "all" - all
           "first" - first entry
           "regex" - entries matching regular expression
       Default:
           "first"

       Context:
           list (config)

       "include_ldap_2level_query.regex1"

       first-level regular expression

       Format:
           /".+"/

       Default:
           ""

       Context:
           list (config)

       "include_ldap_2level_query.suffix2"

       second-level suffix template

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       "include_ldap_2level_query.scope2"

       second-level search scope

       Format:
           "base" - base
           "one" - one level
           "sub" - subtree
       Default:
           "sub"

       Context:
           list (config)

       "include_ldap_2level_query.timeout2"

       second-level connection timeout

       Format:
           Number of seconds.

       Default:
           30 (seconds)

       Context:
           list (config)

       "include_ldap_2level_query.filter2"

       second-level filter template

       Format:
           /".+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       "include_ldap_2level_query.attrs2"

       second-level extracted attribute

       Format:
           /"$ldap_attrdesc(\s*,\s*$ldap_attrdesc)?"/

       Default:
           "mail"

       Context:
           list (config)

       "include_ldap_2level_query.select2"

       second-level selection

       Format:
           "all" - all
           "first" - first entry
           "regex" - entries matching regular expression
       Default:
           "first"

       Context:
           list (config)

       "include_ldap_2level_query.regex2"

       second-level regular expression

       Format:
           /".+"/

       Default:
           ""

       Context:
           list (config)

       "include_ldap_2level_query.nosync_time_ranges"

       Time ranges when inclusion is not allowed

       Format:
           /$time_ranges/

       Default:
           None.

       Context:
           list (config)

       Available versions:
           6.2a.16 and later.

       "include_ldap_2level_query.passwd"

       See "bind_password".

       Context:
           list (config)

       Available versions:
           up to 6.2.56.

       "include_ldap_2level_query.use_ssl"

       See "use_tls".

       Context:
           list (config)

       Available versions:
           5.3a.2 to 6.2.14.

       "include_ldap_2level_query.user"

       See "bind_dn".

       Context:
           list (config)

       Available versions:
           up to 6.2.56.

       "include_sql_query"

       (Paragraph) SQL query inclusion

       Multiple occurrences allowed

       This parameter is used to define the SQL query parameters.

       "include_sql_query.name"

       short name for this source

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       "include_sql_query.db_type"

       database type

       Format:
           /"\S+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       "include_sql_query.db_host"

       remote host

       Format:
           /$host/

       Default:
           None.

       Context:
           list (config)

       Available versions:
           6.2.57b.1 and later.

       "include_sql_query.db_port"

       database port

       Format:
           /"\d+"/

       Default:
           None.

       Context:
           list (config)

       "include_sql_query.db_name"

       database name

       Format:
           /"\S+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       "include_sql_query.db_options"

       connection options

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       Available versions:
           6.2.57b.1 and later.

       "include_sql_query.db_env"

       environment variables for database connection

       Format:
           /"\w+\=\S+(;\w+\=\S+)*"/

       Default:
           None.

       Context:
           list (config)

       "include_sql_query.db_user"

       remote user

       Format:
           /"\S+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       Available versions:
           6.2.57b.1 and later.

       "include_sql_query.db_passwd"

       remote password

       Format:
           The value to be concealed.

       Default:
           None.

       Context:
           list (config)

       Available versions:
           6.2.57b.1 and later.

       "include_sql_query.sql_query"

       SQL query

       Format:
           /$sql_query/

       Default:
           None, mandatory.

       Context:
           list (config)

       "include_sql_query.f_dir"

       Directory where the database is stored (used for DBD::CSV only)

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       "include_sql_query.nosync_time_ranges"

       Time ranges when inclusion is not allowed

       Format:
           /$time_ranges/

       Default:
           None.

       Context:
           list (config)

       Available versions:
           6.2a.16 and later.

       "include_sql_query.connect_options"

       See "db_options".

       Context:
           list (config)

       Available versions:
           up to 6.2.56.

       "include_sql_query.host"

       See "db_host".

       Context:
           list (config)

       Available versions:
           up to 6.2.56.

       "include_sql_query.passwd"

       See "db_passwd".

       Context:
           list (config)

       Available versions:
           up to 6.2.56.

       "include_sql_query.user"

       See "db_user".

       Context:
           list (config)

       Available versions:
           up to 6.2.56.

       "ttl"

       Inclusions timeout

       Format:
           Number of seconds.

       Default:
           3600 (seconds)

       Context:
           list (config), site (sympa.conf)

       Sympa caches user data extracted using the include parameter. Their TTL (time-to-live)
       within Sympa can be controlled using this parameter. The default value is 3600

       "distribution_ttl"

       Inclusions timeout for message distribution

       Format:
           Number of seconds.

       Default:
           None.

       Context:
           list (config), site (sympa.conf)

       This parameter defines the delay since the last synchronization after which the user's
       list will be updated before performing either of following actions:

       * Reviewing list members

       * Message distribution

       "include_ldap_ca"

       (Paragraph) LDAP query custom attribute

       Multiple occurrences allowed

       "include_ldap_ca.name"

       short name for this source

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       "include_ldap_ca.host"

       remote host

       Format:
           /$multiple_host_or_url/

       Default:
           None, mandatory.

       Context:
           list (config)

       "include_ldap_ca.port"

       Deprecated.

       Context:
           list (config)

       "include_ldap_ca.use_tls"

       use TLS (formerly SSL)

       Format:
           "starttls" - use STARTTLS
           "ldaps" - use LDAPS (LDAP over TLS)
           "none" - do nothing
       Default:
           "none"

       Context:
           list (config)

       Available versions:
           6.2.15 and later.

       "include_ldap_ca.ssl_version"

       SSL version

       Format:
           "sslv2" - SSL version 2
           "sslv3" - SSL version 3
           "tlsv1" - TLS version 1
           "tlsv1_1" - TLS version 1.1
           "tlsv1_2" - TLS version 1.2
           "tlsv1_3" - TLS version 1.3
       Default:
           "tlsv1"

       Context:
           list (config)

       "include_ldap_ca.ssl_ciphers"

       SSL ciphers used

       Format:
           /".+"/

       Default:
           "ALL"

       Context:
           list (config)

       "include_ldap_ca.ca_verify"

       Certificate verification

       Format:
           "none" - do nothing
           "optional" - optional
           "required" - required
       Default:
           "required"

       Context:
           list (config)

       Available versions:
           6.2.13 and later.

       "include_ldap_ca.bind_dn"

       remote user

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       Available versions:
           6.2.57b.1 and later.

       "include_ldap_ca.bind_password"

       remote password

       Format:
           The value to be concealed.

       Default:
           None.

       Context:
           list (config)

       Available versions:
           6.2.57b.1 and later.

       "include_ldap_ca.suffix"

       suffix

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       "include_ldap_ca.scope"

       search scope

       Format:
           "base" - base
           "one" - one level
           "sub" - subtree
       Default:
           "sub"

       Context:
           list (config)

       "include_ldap_ca.timeout"

       connection timeout

       Format:
           Number of seconds.

       Default:
           30 (seconds)

       Context:
           list (config)

       "include_ldap_ca.filter"

       filter

       Format:
           /".+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       "include_ldap_ca.attrs"

       extracted attribute

       Format:
           /"$ldap_attrdesc(\s*,\s*$ldap_attrdesc)?"/

       Default:
           "mail"

       Context:
           list (config)

       "include_ldap_ca.email_entry"

       Name of email entry

       Format:
           /"\S+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       "include_ldap_ca.select"

       selection (if multiple)

       Format:
           "all" - all
           "first" - first entry
           "regex" - entries matching regular expression
       Default:
           "first"

       Context:
           list (config)

       "include_ldap_ca.regex"

       regular expression

       Format:
           /".+"/

       Default:
           ""

       Context:
           list (config)

       "include_ldap_ca.nosync_time_ranges"

       Time ranges when inclusion is not allowed

       Format:
           /$time_ranges/

       Default:
           None.

       Context:
           list (config)

       "include_ldap_ca.passwd"

       See "bind_password".

       Context:
           list (config)

       Available versions:
           up to 6.2.56.

       "include_ldap_ca.use_ssl"

       See "use_tls".

       Context:
           list (config)

       Available versions:
           6.2a? to 6.2.14.

       "include_ldap_ca.user"

       See "bind_dn".

       Context:
           list (config)

       Available versions:
           up to 6.2.56.

       "include_ldap_2level_ca"

       (Paragraph) LDAP 2-level query custom attribute

       Multiple occurrences allowed

       "include_ldap_2level_ca.name"

       short name for this source

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       "include_ldap_2level_ca.host"

       remote host

       Format:
           /$multiple_host_or_url/

       Default:
           None, mandatory.

       Context:
           list (config)

       "include_ldap_2level_ca.port"

       Deprecated.

       Context:
           list (config)

       "include_ldap_2level_ca.use_tls"

       use TLS (formerly SSL)

       Format:
           "starttls" - use STARTTLS
           "ldaps" - use LDAPS (LDAP over TLS)
           "none" - do nothing
       Default:
           "none"

       Context:
           list (config)

       Available versions:
           6.2.15 and later.

       "include_ldap_2level_ca.ssl_version"

       SSL version

       Format:
           "sslv2" - SSL version 2
           "sslv3" - SSL version 3
           "tlsv1" - TLS version 1
           "tlsv1_1" - TLS version 1.1
           "tlsv1_2" - TLS version 1.2
           "tlsv1_3" - TLS version 1.3
       Default:
           "tlsv1"

       Context:
           list (config)

       "include_ldap_2level_ca.ssl_ciphers"

       SSL ciphers used

       Format:
           /".+"/

       Default:
           "ALL"

       Context:
           list (config)

       "include_ldap_2level_ca.ca_verify"

       Certificate verification

       Format:
           "none" - do nothing
           "optional" - optional
           "required" - required
       Default:
           "required"

       Context:
           list (config)

       Available versions:
           6.2.13 and later.

       "include_ldap_2level_ca.bind_dn"

       remote user

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       Available versions:
           6.2.57b.1 and later.

       "include_ldap_2level_ca.bind_password"

       remote password

       Format:
           The value to be concealed.

       Default:
           None.

       Context:
           list (config)

       Available versions:
           6.2.57b.1 and later.

       "include_ldap_2level_ca.suffix1"

       first-level suffix

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       "include_ldap_2level_ca.scope1"

       first-level search scope

       Format:
           "base" - base
           "one" - one level
           "sub" - subtree
       Default:
           "sub"

       Context:
           list (config)

       "include_ldap_2level_ca.timeout1"

       first-level connection timeout

       Format:
           Number of seconds.

       Default:
           30 (seconds)

       Context:
           list (config)

       "include_ldap_2level_ca.filter1"

       first-level filter

       Format:
           /".+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       "include_ldap_2level_ca.attrs1"

       first-level extracted attribute

       Format:
           /$ldap_attrdesc/

       Default:
           None.

       Context:
           list (config)

       "include_ldap_2level_ca.select1"

       first-level selection

       Format:
           "all" - all
           "first" - first entry
           "regex" - entries matching regular expression
       Default:
           "first"

       Context:
           list (config)

       "include_ldap_2level_ca.regex1"

       first-level regular expression

       Format:
           /".+"/

       Default:
           ""

       Context:
           list (config)

       "include_ldap_2level_ca.suffix2"

       second-level suffix template

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       "include_ldap_2level_ca.scope2"

       second-level search scope

       Format:
           "base" - base
           "one" - one level
           "sub" - subtree
       Default:
           "sub"

       Context:
           list (config)

       "include_ldap_2level_ca.timeout2"

       second-level connection timeout

       Format:
           Number of seconds.

       Default:
           30 (seconds)

       Context:
           list (config)

       "include_ldap_2level_ca.filter2"

       second-level filter template

       Format:
           /".+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       "include_ldap_2level_ca.attrs2"

       second-level extracted attribute

       Format:
           /$ldap_attrdesc/

       Default:
           "mail"

       Context:
           list (config)

       "include_ldap_2level_ca.select2"

       second-level selection

       Format:
           "all" - all
           "first" - first entry
           "regex" - entries matching regular expression
       Default:
           "first"

       Context:
           list (config)

       "include_ldap_2level_ca.regex2"

       second-level regular expression

       Format:
           /".+"/

       Default:
           ""

       Context:
           list (config)

       "include_ldap_2level_ca.email_entry"

       Name of email entry

       Format:
           /"\S+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       "include_ldap_2level_ca.nosync_time_ranges"

       Time ranges when inclusion is not allowed

       Format:
           /$time_ranges/

       Default:
           None.

       Context:
           list (config)

       "include_ldap_2level_ca.passwd"

       See "bind_password".

       Context:
           list (config)

       Available versions:
           up to 6.2.56.

       "include_ldap_2level_ca.use_ssl"

       See "use_tls".

       Context:
           list (config)

       Available versions:
           6.2a? to 6.2.14.

       "include_ldap_2level_ca.user"

       See "bind_dn".

       Context:
           list (config)

       Available versions:
           up to 6.2.56.

       "include_sql_ca"

       (Paragraph) SQL query custom attribute

       Multiple occurrences allowed

       "include_sql_ca.name"

       short name for this source

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       "include_sql_ca.db_type"

       database type

       Format:
           /"\S+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       "include_sql_ca.db_host"

       remote host

       Format:
           /$host/

       Default:
           None.

       Context:
           list (config)

       Available versions:
           6.2.57b.1 and later.

       "include_sql_ca.db_port"

       database port

       Format:
           /"\d+"/

       Default:
           None.

       Context:
           list (config)

       "include_sql_ca.db_name"

       database name

       Format:
           /"\S+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       "include_sql_ca.db_options"

       connection options

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       Available versions:
           6.2.57b.1 and later.

       "include_sql_ca.db_env"

       environment variables for database connection

       Format:
           /"\w+\=\S+(;\w+\=\S+)*"/

       Default:
           None.

       Context:
           list (config)

       "include_sql_ca.db_user"

       remote user

       Format:
           /"\S+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       Available versions:
           6.2.57b.1 and later.

       "include_sql_ca.db_passwd"

       remote password

       Format:
           The value to be concealed.

       Default:
           None.

       Context:
           list (config)

       Available versions:
           6.2.57b.1 and later.

       "include_sql_ca.sql_query"

       SQL query

       Format:
           /$sql_query/

       Default:
           None, mandatory.

       Context:
           list (config)

       "include_sql_ca.f_dir"

       Directory where the database is stored (used for DBD::CSV only)

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       "include_sql_ca.email_entry"

       Name of email entry

       Format:
           /"\S+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       "include_sql_ca.nosync_time_ranges"

       Time ranges when inclusion is not allowed

       Format:
           /$time_ranges/

       Default:
           None.

       Context:
           list (config)

       "include_sql_ca.connect_options"

       See "db_options".

       Context:
           list (config)

       Available versions:
           up to 6.2.56.

       "include_sql_ca.host"

       See "db_host".

       Context:
           list (config)

       Available versions:
           up to 6.2.56.

       "include_sql_ca.passwd"

       See "db_passwd".

       Context:
           list (config)

       Available versions:
           up to 6.2.56.

       "include_sql_ca.user"

       See "db_user".

       Context:
           list (config)

       Available versions:
           up to 6.2.56.

   DKIM/DMARC/ARC
       DKIM signature verification and re-signing. It requires an external module: Mail-DKIM.

       ARC seals on forwarded messages. It requires an external module: Mail-DKIM.

       "dkim_add_signature_to"

       Which service messages to be signed

       Format:
           /"(?:list|robot)(?:,(?:list|robot))*"/

       Default:
           "robot,list"

       Context:
           domain (robot.conf), site (sympa.conf)

       Inserts a DKIM signature to service messages in context of robot, list or both

       "dkim_signer_identity"

       The "i=" tag as defined in rfc 4871

       Format:
           /"\S+"/

       Default:
           None.

       Context:
           domain (robot.conf), site (sympa.conf)

       Default is null.

       "dkim_feature"

       Insert DKIM signature to messages sent to the list

       Format:
           "on" - enabled
           "off" - disabled
       Default:
           "off"

       Context:
           domain (robot.conf), site (sympa.conf)

       If set to "on", Sympa may verify DKIM signatures of incoming messages and/or insert DKIM
       signature to outgoing messages.

       "dkim_parameters"

       (Paragraph) DKIM configuration

       Single occurrence

       A set of parameters in order to define outgoing DKIM signature

       "dkim_parameters.private_key_path"

       File path for DKIM private key

       Format:
           /"\S+"/

       Default:
           None.

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       The file must contain a PEM encoded private key

       "dkim_parameters.selector"

       Selector for DNS lookup of DKIM public key

       Format:
           /"\S+"/

       Default:
           None.

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       The selector is used in order to build the DNS query for public key. It is up to you to
       choose the value you want but verify that you can query the public DKIM key for
       "<selector>._domainkey.your_domain"

       "dkim_parameters.header_list"

       Deprecated.

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       "dkim_parameters.signer_domain"

       DKIM "d=" tag, you should probably use the default value

       Format:
           /"\S+"/

       Default:
           None.

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       The DKIM "d=" tag, is the domain of the signing entity. The list domain MUST be included
       in the "d=" domain

       "dkim_parameters.signer_identity"

       DKIM "i=" tag, you should probably leave this parameter empty

       Format:
           /"\S+"/

       Default:
           None.

       Context:
           list (config)

       DKIM "i=" tag, you should probably not use this parameter, as recommended by RFC 4871,
       default for list broadcasted messages is i=<listname>-request@<domain>

       "dkim_signature_apply_on"

       The categories of messages sent to the list that will be signed using DKIM.

       Format:
           Multiple values allowed, separated by "","".

           "md5_authenticated_messages" - authenticated by password
           "smime_authenticated_messages" - authenticated by S/MIME signature
           "dkim_authenticated_messages" - authenticated by DKIM signature
           "editor_validated_messages" - approved by moderator
           "none" - do nothing
           "any" - any messages
       Default:
           "md5_authenticated_messages,smime_authenticated_messages,dkim_authenticated_messages,editor_validated_messages"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       This parameter controls in which case messages must be signed using DKIM, you may sign
       every message choosing 'any' or a subset. The parameter value is a comma separated list of
       keywords

       "arc_feature"

       Add ARC seals to messages sent to the list

       Format:
           "on" - enabled
           "off" - disabled
       Default:
           "off"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2.37b.1 and later.

       Enable/Disable ARC. This feature requires Mail::DKIM::ARC to be installed, and maybe some
       custom scenario to be updated

       "arc_srvid"

       SRV ID for Authentication-Results used in ARC seal

       Format:
           /"\S+"/

       Default:
           None.

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2.37b.1 and later.

       Typically the domain of the mail server

       "arc_parameters"

       (Paragraph) ARC configuration

       Single occurrence

       A set of parameters in order to define outgoing ARC seal

       "arc_parameters.arc_private_key_path"

       File path for ARC private key

       Format:
           /"\S+"/

       Default:
           None.

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       The file must contain a PEM encoded private key. Defaults to same file as DKIM private key

       "arc_parameters.arc_selector"

       Selector for DNS lookup of ARC public key

       Format:
           /"\S+"/

       Default:
           None.

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       The selector is used in order to build the DNS query for public key. It is up to you to
       choose the value you want but verify that you can query the public DKIM key for
       "<selector>._domainkey.your_domain". Default is the same selector as for DKIM signatures

       "arc_parameters.arc_signer_domain"

       ARC "d=" tag, you should probably use the default value

       Format:
           /"\S+"/

       Default:
           None.

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       The ARC "d=" tag is the domain of the signing entity. The DKIM d= domain name is used as
       its default value

       "dmarc_protection"

       (Paragraph) DMARC Protection

       Single occurrence

       Parameters to define how to manage From address processing to avoid some domains'
       excessive DMARC protection

       "dmarc_protection.mode"

       Protection modes

       Format:
           Multiple values allowed, separated by "","".

           "none" - do nothing
           "all" - all
           "dkim_signature" - DKIM signature exists
           "dmarc_reject" - DMARC policy suggests rejection
           "dmarc_any" - DMARC policy exists
           "dmarc_quarantine" - DMARC policy suggests quarantine
           "domain_regex" - domain matching regular expression
       Default:
           None.

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       Select one or more operation modes.  "Domain matching regular expression" (domain_regex)
       matches the specified Domain regular expression; "DKIM signature exists" (dkim_signature)
       matches any message with a DKIM signature header; "DMARC policy ..." (dmarc_*) matches
       messages from sender domains with a DMARC policy as given; "all" (all) matches all
       messages.

       Example:

         dmarc_protection.mode dmarc_reject,dkim_signature

       "dmarc_protection.domain_regex"

       Regular expression for domain name match

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       Regular expression match pattern for From domain

       "dmarc_protection.other_email"

       New From address

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       This is the email address to use when modifying the From header.  It defaults to the list
       address.  This is similar to Anonymisation but preserves the original sender details in
       the From address phrase.

       "dmarc_protection.phrase"

       New From name format

       Format:
           "display_name" - "Name"
           "name_and_email" - "Name" (e-mail)
           "name_via_list" - "Name" (via List)
           "name_email_via_list" - "Name" (e-mail via List)
           "list_for_email" - "List" (on behalf of e-mail)
           "list_for_name" - "List" (on behalf of Name)
       Default:
           "name_via_list"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       This is the format to be used for the sender name part of the new From header field.

   List address verification
       Checks if an alias with the same name as the list to be created already exists on the SMTP
       server. This feature requires an external module: Net-SMTP.

       "list_check_helo"

       SMTP HELO (EHLO) parameter used for address verification

       Format:
           /"\S+"/

       Default:
           None.

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2a.0 and later.

       Default value is the host part of "list_check_smtp" parameter.

       "list_check_smtp"

       SMTP server to verify existence of the same addresses as the list to be created

       Format:
           /$hostport/

       Default:
           None.

       Context:
           domain (robot.conf), site (sympa.conf)

       This is needed if you are running Sympa on a host but you handle all your mail on a
       separate mail relay.

       Default value is real FQDN of the host. Port number may be specified as
       "mail.example.org:25" or "203.0.113.1:25".  If port is not specified, standard port (25)
       will be used.

       "list_check_suffixes"

       Address suffixes to verify

       Format:
           /"\S+"/

       Default:
           "request,owner,editor,unsubscribe,subscribe"

       Context:
           domain (robot.conf), site (sympa.conf)

       List of suffixes you are using for list addresses, i.e. "mylist-request", "mylist-owner"
       and so on.

       This parameter is used with the "list_check_smtp" parameter. It is also used to check list
       names at list creation time.

   Antivirus plug-in
       "antivirus_path"

       Path to the antivirus scanner engine

       Format:
           /".+"/

       Default:
           None.

       Context:
           domain (robot.conf), site (sympa.conf)

       Supported antivirus: Clam AntiVirus/clamscan & clamdscan, McAfee/uvscan, Fsecure/fsav,
       Sophos, AVP and Trend Micro/VirusWall

       Example:

         antivirus_path /usr/local/bin/clamscan

       "antivirus_args"

       Antivirus plugin command line arguments

       Format:
           /".+"/

       Default:
           None.

       Context:
           domain (robot.conf), site (sympa.conf)

       Example:

         antivirus_args --no-summary --database /usr/local/share/clamav

       "antivirus_notify"

       Notify sender if virus checker detects malicious content

       Format:
           "sender" - sender
           "delivery_status" - send back DSN
           "none" - do nothing
       Default:
           "sender"

       Context:
           domain (robot.conf), site (sympa.conf)

       "sender" to notify originator of the message, "delivery_status" to send delivery status,
       or "none"

   Miscellaneous
       "email"

       Local part of Sympa email address

       Format:
           /"\S+"/

       Default:
           "sympa"

       Context:
           domain (robot.conf), site (sympa.conf)

       Local part (the part preceding the "@" sign) of the address by which mail interface of
       Sympa accepts mail commands.

       If you change the default value, you must modify the mail aliases too.

       "listmaster_email"

       Local part of listmaster email address

       Format:
           /"\S+"/

       Default:
           "listmaster"

       Context:
           domain (robot.conf), site (sympa.conf)

       Local part (the part preceding the "@" sign) of the address by which listmasters receive
       messages.

       If you change the default value, you must modify the mail aliases too.

       "custom_robot_parameter"

       Custom robot parameter

       Format:
           Multiple occurrences allowed.

           /".+"/

       Default:
           None.

       Context:
           domain (robot.conf), site (sympa.conf)

       Used to define a custom parameter for your server. Do not forget the semicolon between the
       parameter name and the parameter value.

       You will be able to access the custom parameter value in web templates by variable
       "conf.custom_robot_parameter.<param_name>"

       Example:

         custom_robot_parameter param_name ; param_value

       "prohibited_listnames"

       Prevent people to use some names for their lists names

       Format:
           Any.

       Default:
           None.

       Context:
           site (sympa.conf)

       Available versions:
           6.2.63b.1 and later.

       This parameter is a comma-separated list of names. You can use * as a wildcard character.
       To use a regex for this, please use prohibited_listnames_regex setting.

       Example:

         prohibited_listnames www,root,*master

       "prohibited_listnames_regex"

       Prevent people to use some names for their lists names, based on a regex

       Format:
           Any.

       Default:
           None.

       Context:
           site (sympa.conf)

       Available versions:
           6.2.63b.1 and later.

       This parameter is a regex. Please note that prohibited_listnames and
       prohibited_listnames_regex will both be applied if set, they are not exclusive.

       Example:

         prohibited_listnames_regex www|root|.*master

       "cache_list_config"

       Use of binary cache of list configuration

       Format:
           "binary_file" - use binary file
           "none" - do nothing
       Default:
           "none"

       Context:
           site (sympa.conf)

       binary_file: Sympa processes will maintain a binary version of the list configuration,
       "config.bin" file on local disk. If you manage a big amount of lists (1000+), it should
       make the web interface startup faster.

       You can recreate cache by running "sympa.pl --reload_list_config".

       "db_list_cache"

       Use database cache to search lists

       Format:
           "on" - enabled
           "off" - disabled
       Default:
           "off"

       Context:
           site (sympa.conf)

       Note that "list_table" database table should be filled at the first time by running:

         # sympa.pl --sync_list_db

       "purge_user_table_task"

       Task for expiring inactive users

       Format:
           /"\w+"/

       Default:
           "monthly"

       Context:
           site (sympa.conf)

       This task removes rows in the "user_table" table which have not corresponding entries in
       the "subscriber_table" table.

       "purge_logs_table_task"

       Task for cleaning tables

       Format:
           /"\w+"/

       Default:
           "daily"

       Context:
           site (sympa.conf)

       This task cleans old logs from "logs_table" table.

       "logs_expiration_period"

       Max age of logs in database

       Format:
           Number of months.

       Default:
           3 (months)

       Context:
           site (sympa.conf)

       Number of months that elapse before a log is expired

       "stats_expiration_period"

       Max age of statistics information in database

       Format:
           Number of months.

       Default:
           3 (months)

       Context:
           site (sympa.conf)

       Available versions:
           6.2b.7 and later.

       Number of months that elapse before statistics information are expired

       "umask"

       Umask

       Format:
           /"[0-7]+"/

       Default:
           027

       Context:
           site (sympa.conf)

       Default mask for file creation (see umask(2)). Note that it will be interpreted as an
       octal value.

       "clean_delay_queuemod"

       Max age of moderated messages

       Format:
           Number of days.

       Default:
           30 (days)

       Context:
           list (config), site (sympa.conf)

       Number of days messages are kept in moderation spool (as specified by "queuemod"
       parameter). Beyond this deadline, messages that have not been processed are deleted.

       "custom_attribute"

       (Paragraph) Custom user attributes

       Multiple occurrences allowed

       "custom_attribute.id"

       internal identifier

       Format:
           /"\w+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       "custom_attribute.name"

       label

       Format:
           /".+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       "custom_attribute.comment"

       additional comment

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       "custom_attribute.type"

       type

       Format:
           "string" - string
           "text" - multi-line text
           "integer" - number
           "enum" - set of keywords
       Default:
           "string"

       Context:
           list (config)

       "custom_attribute.enum_values"

       possible attribute values (if enum is used)

       Format:
           /".+"/

       Default:
           None.

       Context:
           list (config)

       "custom_attribute.optional"

       is the attribute optional?

       Format:
           "required" - required
           "optional" - optional
       Default:
           "optional"

       Context:
           list (config)

       "custom_vars"

       (Paragraph) custom parameters

       Multiple occurrences allowed

       "custom_vars.name"

       var name

       Format:
           /"\S+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       "custom_vars.value"

       var value

       Format:
           /".+"/

       Default:
           None, mandatory.

       Context:
           list (config)

       "loop_prevention_regex"

       Regular expression applied to prevent loops with robots

       Format:
           /"\S*"/

       Default:
           "mailer-daemon|sympa|listserv|majordomo|smartlist|mailman"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       If the sender address matches the regular expression, then the message is rejected.

       "pictures_feature"

       Pictures

       Format:
           "on" - enabled
           "off" - disabled
       Default:
           "on"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       Enables or disables the pictures feature by default.  If enabled, subscribers can upload
       their picture (from the "Subscriber option" page) to use as an avatar.

       Pictures are stored in a directory specified by the "static_content_path" parameter.

       "remind_task"

       Periodical subscription reminder task

       Format:
           /"\w+"/

       Default:
           None.

       Context:
           list (config), site (sympa.conf)

       This parameter states which model is used to create a remind task. A remind task regularly
       sends  subscribers a message which reminds them of their list subscriptions.

       "latest_instantiation"

       (Paragraph) Latest family instantiation

       Single occurrence

       "latest_instantiation.email"

       who ran the instantiation

       Format:
           /"listmaster|$email"/

       Default:
           None.

       Context:
           list (config)

       "latest_instantiation.date_epoch"

       date

       Format:
           The time in second from Unix epoch.

       Default:
           None, mandatory.

       Context:
           list (config)

       "latest_instantiation.date"

       Deprecated.

       Context:
           list (config)

       Available versions:
           up to 6.2.16.

       "creation"

       (Paragraph) Creation of the list

       Single occurrence

       "creation.email"

       who created the list

       Format:
           /"listmaster|$email"/

       Default:
           None, mandatory.

       Context:
           list (config)

       "creation.date_epoch"

       date

       Format:
           The time in second from Unix epoch.

       Default:
           None, mandatory.

       Context:
           list (config)

       "creation.date"

       Deprecated.

       Context:
           list (config)

       Available versions:
           up to 6.2.16.

       "update"

       (Paragraph) Last update of config

       Single occurrence

       "update.email"

       who updated the config

       Format:
           /"(listmaster|automatic|$email)"/

       Default:
           None.

       Context:
           list (config)

       "update.date_epoch"

       date

       Format:
           The time in second from Unix epoch.

       Default:
           None, mandatory.

       Context:
           list (config)

       "update.date"

       Deprecated.

       Context:
           list (config)

       Available versions:
           up to 6.2.16.

       "status"

       Status of the list

       Format:
           Status of list.

       Default:
           "open"

       Context:
           list (config)

       "serial"

       Serial number of the config

       Format:
           /"\d+"/

       Default:
           0

       Context:
           list (config)

   Web interface parameters
       "wwsympa_url"

       URL prefix of web interface

       Format:
           Any.

       Default:
           None.

       Context:
           domain (robot.conf), site (sympa.conf)

       This is used to construct URLs of web interface. The protocol (either https:// or http://)
       is required.

       Example:

         wwsympa_url https://web.example.org/sympa

       "wwsympa_url_local"

       URL prefix of WWSympa behind proxy

       Format:
           Any.

       Default:
           None.

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2.56 and later.

       "static_content_url"

       URL for static contents

       Format:
           Any.

       Default:
           "/static-sympa"

       Context:
           domain (robot.conf), site (sympa.conf)

       HTTP server have to map it with "static_content_path" directory.

       "static_content_path"

       Directory for static contents

       Format:
           Any.

       Default:
           $STATICDIR

       Context:
           domain (robot.conf), site (sympa.conf)

       "css_path"

       Directory for static style sheets (CSS)

       Format:
           Any.

       Default:
           $CSSDIR

       Context:
           site (sympa.conf)

       After an upgrade, static CSS files are upgraded with the newly installed "css.tt2"
       template. Therefore, this is not a good place to store customized CSS files.

       "css_url"

       URL for style sheets (CSS)

       Format:
           Any.

       Default:
           "/static-sympa/css"

       Context:
           site (sympa.conf)

       To use auto-generated static CSS, HTTP server have to map it with "css_path".

       "pictures_path"

       Directory for subscribers pictures

       Format:
           Any.

       Default:
           $PICTURESDIR

       Context:
           site (sympa.conf)

       Available versions:
           6.2.25b.2 and later.

       "pictures_url"

       URL for subscribers pictures

       Format:
           Any.

       Default:
           "/static-sympa/pictures"

       Context:
           site (sympa.conf)

       Available versions:
           6.2.25b.2 and later.

       HTTP server have to map it with "pictures_path" directory.

       "mhonarc"

       Path to MHonArc mail-to-HTML converter

       Format:
           Any.

       Default:
           "/usr/bin/mhonarc"

       Context:
           domain (robot.conf), site (sympa.conf)

       This is required for HTML mail archiving.

       "log_facility"

       System log facility for web interface

       Format:
           Any.

       Default:
           "LOCAL1"

       Context:
           site (sympa.conf)

       System log facility for WWSympa, archived.pl and bounced.pl. Default is to use value of
       "syslog" parameter.

   Web interface parameters: Appearances
       "logo_html_definition"

       Custom logo

       Format:
           Any.

       Default:
           None.

       Context:
           domain (robot.conf), site (sympa.conf)

       HTML fragment to insert a logo in the page of web interface.

       Example:

         logo_html_definition <a href="http://www.example.com"><img style="float: left; margin-top: 7px; margin-left: 37px;" src="http://www.example.com/logos/mylogo.jpg" alt="My Company" /></a>

       "favicon_url"

       Custom favicon

       Format:
           Any.

       Default:
           None.

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2a.5 and later.

       URL of favicon image

       "color_0", ..., "color_15"

       Colors for web interface

       Format:
           Any.

       Default:
           See description on web interface.

       Context:
           domain (robot.conf), site (sympa.conf)

       Colors are used in style sheet (CSS). They may be changed using web interface by
       listmasters.

       "dark_color", "light_color", "text_color", "bg_color", "error_color", "selected_color",
       "shaded_color"

       Colors for web interface, obsoleted

       Format:
           Any.

       Default:
           See description on web interface.

       Context:
           domain (robot.conf), site (sympa.conf)

       "default_home"

       Type of main web page

       Format:
           Any.

       Default:
           "home"

       Context:
           domain (robot.conf), site (sympa.conf)

       "lists" for the page of list of lists. "home" for home page.

       "archive_default_index"

       Default index organization of web archive

       Format:
           Any.

       Default:
           "thrd"

       Context:
           site (sympa.conf)

       thrd: Threaded index.

       mail: Chronological index.

       "review_page_size"

       Size of review page

       Format:
           Any.

       Default:
           25

       Context:
           domain (robot.conf), site (sympa.conf)

       Default number of lines of the array displaying users in the review page

       "viewlogs_page_size"

       Size of viewlogs page

       Format:
           Any.

       Default:
           25

       Context:
           domain (robot.conf), site (sympa.conf)

       Default number of lines of the array displaying the log entries in the logs page.

       "main_menu_custom_button_1_title", ... "main_menu_custom_button_3_title",
       "main_menu_custom_button_1_url", ... "main_menu_custom_button_3_url",
       "main_menu_custom_button_1_target", ... "main_menu_custom_button_3_target"

       Custom menus

       Format:
           Any.

       Default:
           None.

       Context:
           domain (robot.conf), site (sympa.conf)

       You may modify the main menu content by editing the menu.tt2 file, but you can also edit
       these parameters in order to add up to 3 buttons. Each button is defined by a title (the
       text in the button), an URL and, optionally, a target.

       Example:

         main_menu_custom_button_1_title FAQ
         main_menu_custom_button_1_url http://www.renater.fr/faq/universalistes/index
         main_menu_custom_button_1_target Help

   Password validation
       Checks if the password the user submitted has sufficient strength. This feature requires
       an external module: Data-Password.

       "password_validation"

       Password validation

       Format:
           Any.

       Default:
           None.

       Context:
           site (sympa.conf)

       Available versions:
           6.1.23 and later.

       The password validation techniques to be used against user passwords that are added to
       mailing lists. Options come from Data::Password
       https://metacpan.org/pod/Data::Password#VARIABLES

       Example:

         password_validation MINLEN=8,GROUPS=3,DICTIONARY=4,DICTIONARIES=/pentest/dictionaries

   Authentication with LDAP
       Authenticates users based on the directory on LDAP server. This feature requires an
       external module: Net-LDAP. And also, if secure connection (LDAPS) is required: IO-Socket-
       SSL.

       "ldap_force_canonical_email"

       Use canonical email address for LDAP authentication

       Format:
           Any.

       Default:
           1

       Context:
           domain (robot.conf), site (sympa.conf)

       When using LDAP authentication, if the identifier provided by the user was a valid email,
       if this parameter is set to false, then the provided email will be used to authenticate
       the user. Otherwise, use of the first email returned by the LDAP server will be used.

   SOAP HTTP interface
       Provides some functions of Sympa through the SOAP HTTP interface. This feature requires an
       external module: SOAP-Lite.

       "soap_url"

       URL of SympaSOAP

       Format:
           Any.

       Default:
           None.

       Context:
           domain (robot.conf), site (sympa.conf)

       WSDL document of SympaSOAP refers to this URL in its service section.

       Example:

         soap_url http://web.example.org/sympasoap

       "soap_url_local"

       URL of SympaSOAP behind proxy

       Format:
           Any.

       Default:
           None.

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2.19b.1 and later.

   Web interface parameters: Miscellaneous
       "cookie_domain"

       HTTP cookies validity domain

       Format:
           Any.

       Default:
           "localhost"

       Context:
           domain (robot.conf), site (sympa.conf)

       If beginning with a dot ("."), the cookie is available within the specified Internet
       domain. Otherwise, for the specified host. The only reason for replacing the default value
       would be where WWSympa's authentication process is shared with an application running on
       another host.

       Example:

         cookie_domain .renater.fr

       "cookie_expire"

       HTTP cookies lifetime

       Format:
           Any.

       Default:
           0

       Context:
           site (sympa.conf)

       This is the default value when not set explicitly by users. "0" means the cookie may be
       retained during browser sessions.

       "cookie_refresh"

       Average interval to refresh HTTP session ID.

       Format:
           Any.

       Default:
           60

       Context:
           site (sympa.conf)

       "purge_session_table_task"

       Task for cleaning old sessions

       Format:
           /"\w+"/

       Default:
           "daily"

       Context:
           site (sympa.conf)

       This task removes old entries in the "session_table" table.

       "session_table_ttl"

       Max age of sessions

       Format:
           Any.

       Default:
           "2d"

       Context:
           site (sympa.conf)

       Session duration is controlled by "sympa_session" cookie validity attribute. However, by
       security reason, this delay also need to be controlled by server side. This task removes
       old entries in the "session_table" table.

       Format of values is a string without spaces including "y" for years, "m" for months, "d"
       for days, "h" for hours, "min" for minutes and "sec" for seconds.

       "anonymous_session_table_ttl"

       Max age of sessions for anonymous users

       Format:
           Any.

       Default:
           "1h"

       Context:
           site (sympa.conf)

       "shared_feature"

       Enable shared repository

       Format:
           "on" - enabled
           "off" - disabled
       Default:
           "off"

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2.41b.2 and later.

       If set to "on", list owners can open shared repository.

       "use_html_editor"

       Use HTML editor

       Format:
           "off" - disabled
           "on" - enabled
       Default:
           "off"

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2a.0 and later.

       If set to "on", users will be able to post messages in HTML using a javascript WYSIWYG
       editor.

       Example:

         use_html_editor on

       "html_editor_url"

       URL of HTML editor

       Format:
           Any.

       Default:
           None.

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2a.34 and later.

       URL path to the javascript file making the WYSIWYG HTML editor available.  Relative path
       under <static_content_url> or absolute path.

       Example is for TinyMCE 4 installed under <static_content_path>/js/tinymce/.

       Example:

         html_editor_url js/tinymce/tinymce.min.js

       "html_editor_init"

       HTML editor initialization

       Format:
           Any.

       Default:
           None.

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2a.0 and later.

       Javascript excerpt that enables and configures the WYSIWYG HTML editor.

       Example:

         html_editor_init tinymce.init({selector:"#body",language:lang.split(/[^a-zA-Z]+/).join("_")});

       "max_wrong_password"

       Count limit of wrong password submission

       Format:
           Any.

       Default:
           19

       Context:
           domain (robot.conf), site (sympa.conf)

       If this limit is reached, the account is locked until the user renews their password. The
       default value is chosen in order to block bots trying to log in using brute force
       strategy. This value should never be reached by real users that will probably uses the
       renew password service before they performs so many tries.

       "password_case"

       Password case

       Format:
           Any.

       Default:
           "insensitive"

       Context:
           site (sympa.conf)

       "insensitive" or "sensitive".

       If set to "insensitive", WWSympa's password check will be insensitive. This only concerns
       passwords stored in the Sympa database, not the ones in LDAP.

       Should not be changed! May invalid all user password.

       "password_hash"

       Password hashing algorithm

       Format:
           Any.

       Default:
           "md5"

       Context:
           site (sympa.conf)

       Available versions:
           6.2.25b.3 and later.

       "md5" or "bcrypt".

       If set to "md5", Sympa will use MD5 password hashes. If set to "bcrypt", bcrypt hashes
       will be used instead. This only concerns passwords stored in the Sympa database, not the
       ones in LDAP.

       "password_hash_update"

       Update password hashing algorithm when users log in

       Format:
           Any.

       Default:
           1

       Context:
           site (sympa.conf)

       Available versions:
           6.2.25b.3 and later.

       On successful login, update the encrypted user password to use the algorithm specified by
       "password_hash". This allows for a graceful transition to a new password hash algorithm. A
       value of 0 disables updating of existing password hashes.  New and reset passwords will
       use the "password_hash" setting in all cases.

       "bcrypt_cost"

       Bcrypt hash cost

       Format:
           Any.

       Default:
           12

       Context:
           site (sympa.conf)

       Available versions:
           6.2.25b.3 and later.

       When "password_hash" is set to "bcrypt", this sets the "cost" parameter of the bcrypt hash
       function. The default of 12 is expected to require approximately 250ms to calculate the
       password hash on a 3.2GHz CPU. This only concerns passwords stored in the Sympa database,
       not the ones in LDAP.

       Can be changed but any new cost setting will only apply to new passwords.

       "one_time_ticket_lifetime"

       Age of one time ticket

       Format:
           Any.

       Default:
           "2d"

       Context:
           site (sympa.conf)

       Duration before the one time tickets are expired

       "one_time_ticket_lockout"

       Restrict access to one time ticket

       Format:
           Any.

       Default:
           "one_time"

       Context:
           domain (robot.conf), site (sympa.conf)

       Is access to the one time ticket restricted, if any users previously accessed? (one_time |
       remote_addr | open)

       "purge_one_time_ticket_table_task"

       Task for expiring old one time tickets

       Format:
           /"\w+"/

       Default:
           "daily"

       Context:
           site (sympa.conf)

       "one_time_ticket_table_ttl"

       Expiration period of one time ticket

       Format:
           Any.

       Default:
           "10d"

       Context:
           site (sympa.conf)

       "pictures_max_size"

       The maximum size of uploaded picture

       Format:
           Number of bytes.

       Default:
           102400 (bytes)

       Context:
           domain (robot.conf), site (sympa.conf)

       "spam_protection"

       Protect web interface against spam harvesters

       Format:
           "at" - replace @ characters
           "javascript" - use JavaScript
           "none" - do nothing
       Default:
           "javascript"

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       There is a need to protect Sympa web sites against spambots which collect email addresses
       from public web sites. Various methods are available in Sympa and you can choose to use
       them with the spam_protection and web_archive_spam_protection parameters. Possible value
       are:

       javascript:

       the address is hidden using a javascript. A user who enables javascript can see a nice
       mailto address where others have nothing.

       at:

       the @ char is replaced by the string " AT ".

       none:

       no protection against spammer.

       "reporting_spam_script_path"

       Script to report spam

       Format:
           Any.

       Default:
           None.

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2a.0 and later.

       If set, when a list moderator report undetected spams for list moderation, this external
       script is invoked and the message is injected into standard input of the script.

       "domains_blocklist"

       Prevent people to subscribe to a list with addresses using these domains

       Format:
           Any.

       Default:
           None.

       Context:
           site (sympa.conf)

       Available versions:
           6.2.61b.1 and later.

       This parameter is a comma-separated list.

       Example:

         domains_blocklist example.org,spammer.com

       "quiet_subscription"

       Quiet subscriptions policy

       Format:
           "on" - enabled
           "optional" - optional
           "off" - disabled
       Default:
           "optional"

       Context:
           site (sympa.conf)

       Available versions:
           6.2.41b.1 and later.

       Global policy for quiet subscriptions: "on" means that subscriptions will never send a
       notice to the subscriber, "off" will enforce a notice sending, and "optional" (default)
       allows the use of the list policy.

       "show_report_abuse"

       Add a "Report abuse" link in the side menu of the lists

       Format:
           "on" - enabled
           "off" - disabled
       Default:
           "off"

       Context:
           site (sympa.conf)

       Available versions:
           6.2.37b.3 and later.

       The link is a mailto link, you can change that by overriding web_tt2/report_abuse.tt2

       "allow_account_deletion"

       EXPERIMENTAL! Allow users to delete their account. If enabled, shows a "delete my account"
       form in user's preferences page.

       Format:
           "on" - enabled
           "off" - disabled
       Default:
           "off"

       Context:
           site (sympa.conf)

       Available versions:
           6.2.41b.1 and later.

       Account deletion unsubscribes the users from his/her lists and removes him/her from lists
       ownership. It is only available to users using internal authentication (i.e. no LDAP, no
       SSO...). See https://github.com/sympa-community/sympa/issues/300 for details

   Renamed parameters
       These parameters were renamed.  Though older names are still available, their use is no
       longer recommended.

       "arc_private_key_path"

       See "arc_parameters.arc_private_key_path".

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2.37b.1 to 6.2.56.

       "arc_selector"

       See "arc_parameters.arc_selector".

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2.37b.1 to 6.2.56.

       "arc_signer_domain"

       See "arc_parameters.arc_signer_domain".

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2.37b.1 to 6.2.56.

       "archive_mail_access"

       See "archive.mail_access".

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           up to 6.2.56.

       "archive_web_access"

       See "archive.web_access".

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           up to 6.2.56.

       "bounce_halt_rate"

       See "bounce.halt_rate".

       Context:
           site (sympa.conf)

       Available versions:
           up to 6.2.56.

       "bounce_warn_rate"

       See "bounce.warn_rate".

       Context:
           site (sympa.conf)

       Available versions:
           up to 6.2.56.

       "custom-header"

       See "custom_header".

       Context:
           Unknown.

       "custom-subject"

       See "custom_subject".

       Context:
           Unknown.

       "d_edit"

       See "shared_doc.d_edit".

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           up to 6.2.56.

       "d_read"

       See "shared_doc.d_read".

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           up to 6.2.56.

       "default_archive_quota"

       See "archive.quota".

       Context:
           site (sympa.conf)

       Available versions:
           up to 6.2.56.

       "default_bounce_level1_rate"

       See "bouncers_level1.rate".

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           up to 6.2.56.

       "default_bounce_level2_rate"

       See "bouncers_level2.rate".

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           up to 6.2.56.

       "default_list_priority"

       See "priority".

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           up to 6.2.56.

       "default_max_list_members"

       See "max_list_members".

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           up to 6.2.56.

       "default_remind_task"

       See "remind_task".

       Context:
           site (sympa.conf)

       Available versions:
           up to 6.2.56.

       "default_shared_quota"

       See "shared_doc.quota".

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           up to 6.2.56.

       "default_sql_fetch_timeout"

       See "sql_fetch_timeout".

       Context:
           site (sympa.conf)

       Available versions:
           6.2a.0 to 6.2.56.

       "default_ttl"

       See "ttl".

       Context:
           site (sympa.conf)

       Available versions:
           up to 6.2.56.

       "dkim_private_key_path"

       See "dkim_parameters.private_key_path".

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           up to 6.2.56.

       "dkim_selector"

       See "dkim_parameters.selector".

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           up to 6.2.56.

       "dkim_signer_domain"

       See "dkim_parameters.signer_domain".

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           up to 6.2.56.

       "dmarc_protection_domain_regex"

       See "dmarc_protection.domain_regex".

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           up to 6.2.56.

       "dmarc_protection_mode"

       See "dmarc_protection.mode".

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           up to 6.2.56.

       "dmarc_protection_other_email"

       See "dmarc_protection.other_email".

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           up to 6.2.56.

       "dmarc_protection_phrase"

       See "dmarc_protection.phrase".

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           up to 6.2.56.

       "domains_blacklist"

       See "domains_blocklist".

       Context:
           site (sympa.conf)

       Available versions:
           6.2.41b.1 to 6.2.60.

       "email_gecos"

       See "gecos".

       Context:
           site (sympa.conf)

       Available versions:
           6.2a.5 to 6.2a.33.

       "forced_reply-to"

       See "forced_reply_to".

       Context:
           Unknown.

       "forced_replyto"

       See "forced_reply_to".

       Context:
           Unknown.

       "key_password"

       See "key_passwd".

       Context:
           site (sympa.conf)

       "max-size"

       See "max_size".

       Context:
           Unknown.

       "merge_feature"

       See "personalization_feature".

       Context:
           Unknown.

       Available versions:
           6.0b.2 to 6.2.59b.1.

       "reply-to"

       See "reply_to".

       Context:
           Unknown.

       "replyto"

       See "reply_to".

       Context:
           Unknown.

       "subscription"

       See "subscribe".

       Context:
           Unknown.

       "tracking_default_retention_period"

       See "tracking.retention_period".

       Context:
           site (sympa.conf)

       Available versions:
           6.2a.3 to 6.2.56.

       "tracking_delivery_status_notification"

       See "tracking.delivery_status_notification".

       Context:
           site (sympa.conf)

       Available versions:
           6.2a.0 to 6.2.56.

       "tracking_message_delivery_notification"

       See "tracking_message_disposition_notification".

       Context:
           site (sympa.conf)

       Available versions:
           6.2a.0 to 6.2a.40.

       "tracking_message_disposition_notification"

       See "tracking.message_disposition_notification".

       Context:
           site (sympa.conf)

       Available versions:
           6.2a.41 to 6.2.56.

       "unsubscription"

       See "unsubscribe".

       Context:
           Unknown.

       "use_blacklist"

       See "use_blocklist".

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           5.3a.4 to 6.2.60.

   Deprecated parameters
       These parameters were deprecated. They may not be used anymore.

       "account"

       Deprecated.

       Context:
           list (config)

       "archived_pidfile"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           up to 6.1.17.

       "automatic_list_prefix"

       Deprecated.

       Context:
           site (sympa.conf)

       "bounced_pidfile"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           up to 6.1.17.

       "clean_delay_queueother"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           5.4a.9 to 5.4.7.

       "cookie"

       Deprecated.

       Context:
           list (config), site (sympa.conf)

       Available versions:
           up to 6.2.60.

       "default_distribution_ttl"

       Deprecated.

       Context:
           site (sympa.conf)

       "distribution_mode"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           5.0a.1 to 6.2a.40.

       "edit_list"

       Deprecated.

       Context:
           site (sympa.conf)

       "editor"

       Deprecated.

       Context:
           list (config)

       Available versions:
           up to 6.2.32.

       "expire_task"

       Deprecated.

       Context:
           list (config)

       "filesystem_encoding"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           5.3a.7 to 6.2.52.

       "forced_reply_to"

       Deprecated.

       Context:
           list (config)

       "host"

       Deprecated.

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       "html_editor_file"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           6.0a.0 to 6.2a.33.

       "htmlarea_url"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           up to 6.2.35b.1.

       "http_host"

       Deprecated.

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           up to 6.2.54.

       "include_list"

       Deprecated.

       Context:
           list (config)

       Available versions:
           2.2.6 to 6.2.15.

       "ldap_export_connection_timeout"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           3.3b.3 to 4.1?.

       "ldap_export_dnmanager"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           3.3b.3 to 4.1?.

       "ldap_export_host"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           3.3b.3 to 4.1?.

       "ldap_export_name"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           3.3b.3 to 4.1?.

       "ldap_export_password"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           3.3b.3 to 4.1?.

       "ldap_export_suffix"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           3.3b.3 to 4.1?.

       "localedir"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           4.2b.2 to 6.2a.32.

       "lock_method"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           5.3b.3 to 6.2a.33.

       "log_condition"

       Deprecated.

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2a.29 to 6.2.41b.1.

       "log_module"

       Deprecated.

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           6.2a.29 to 6.2.41b.1.

       "msgcat"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           up to 4.2b.1.

       "openssl"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           up to 6.2a.40.

       "owner"

       Deprecated.

       Context:
           list (config)

       Available versions:
           up to 6.2.32.

       "pidfile"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           up to 6.1.17.

       "pidfile_bulk"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           up to 6.1.17.

       "pidfile_creation"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           up to 6.1.17.

       "pidfile_distribute"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           up to 6.1.17.

       "queuedistribute"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           5.0a.1 to 6.2a.40.

       "queueexpire"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           up to 5.1.2.

       "reply_to"

       Deprecated.

       Context:
           list (config)

       "sort"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           1.4.0 and later.

       "task_manager_pidfile"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           up to 6.1.17.

       "tracking" (domain and site)

       See "tracking.tracking".

       Context:
           domain (robot.conf), site (sympa.conf)

       Available versions:
           up to 6.2.56.

       "tri"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           up to 1.3.4-1.

       "trusted_ca_options"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           up to 3.3.5.

       "use_fast_cgi"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           up to 6.2.22.

       "user_data_source"

       Deprecated.

       Context:
           list (config)

       "web_archive"

       Deprecated.

       Context:
           list (config), domain (robot.conf), site (sympa.conf)

       Available versions:
           up to 6.2a.43.

       "web_recode_to"

       Deprecated.

       Context:
           site (sympa.conf)

       Available versions:
           up to 5.2.

FILES

       /etc/sympa/sympa/sympa.conf
           Sympa main configuration file.

       $SYSCONFDIR/<mail domain name>/robot.conf
           Configuration specific to each mail domain.

       $EXPLDIR/<list name>/config or $EXPLDIR/<mail domain name>/<list name>/config
           List main configuration file.

SEE ALSO

       Sympa Administration Manual.  <https://www.sympa.community/manual/>.

       auth.conf(5), charset.conf(5), crawlers_detection.conf(5), edit_list.conf(5),
       ldap_alias_manager.conf(5), nrcpt_by_domain.conf(5), sympa_scenario(5), topics.conf(5).