Provided by: manpages_6.03-2_all bug

NAME

       tzfile - timezone information

DESCRIPTION

       The timezone information files used by tzset(3) are typically found under a directory with
       a name like /usr/share/zoneinfo.  These files use the format  described  in  Internet  RFC
       8536.  Each file is a sequence of 8-bit bytes.  In a file, a binary integer is represented
       by a sequence of one or more bytes in network order (bigendian, or high-order byte first),
       with  all bits significant, a signed binary integer is represented using two's complement,
       and a boolean is represented by a one-byte binary integer that is either 0  (false)  or  1
       (true).  The format begins with a 44-byte header containing the following fields:

       * The  magic four-byte ASCII sequence “TZif” identifies the file as a timezone information
         file.

       * A byte identifying the version of the file's format (as of 2017, either an ASCII NUL, or
         “2”, or “3”).

       * Fifteen bytes containing zeros reserved for future use.

       * Six four-byte integer values, in the following order:

         tzh_ttisutcnt
                The number of UT/local indicators stored in the file.  (UT is Universal Time.)

         tzh_ttisstdcnt
                The number of standard/wall indicators stored in the file.

         tzh_leapcnt
                The number of leap seconds for which data entries are stored in the file.

         tzh_timecnt
                The number of transition times for which data entries are stored in the file.

         tzh_typecnt
                The  number  of  local  time  types for which data entries are stored in the file
                (must not be zero).

         tzh_charcnt
                The number of bytes of time zone abbreviation strings stored in the file.

       The above header is followed by the following fields, whose lengths depend on the contents
       of the header:

       * tzh_timecnt four-byte signed integer values sorted in ascending order.  These values are
         written in network byte order.  Each is used  as  a  transition  time  (as  returned  by
         time(2)) at which the rules for computing local time change.

       * tzh_timecnt  one-byte  unsigned integer values; each one but the last tells which of the
         different types of local time types described in the file is associated  with  the  time
         period  starting  with  the  same-indexed  transition  time and continuing up to but not
         including the next transition time.  (The last time type is present only for consistency
         checking with the POSIX-style TZ string described below.)  These values serve as indices
         into the next field.

       * tzh_typecnt ttinfo entries, each defined as follows:

              struct ttinfo {
                   int32_t        tt_utoff;
                   unsigned char  tt_isdst;
                   unsigned char  tt_desigidx;
              };

         Each structure is written as a four-byte signed integer value for tt_utoff,  in  network
         byte  order,  followed  by  a  one-byte  boolean  for  tt_isdst and a one-byte value for
         tt_desigidx.  In each structure, tt_utoff gives the number of seconds to be added to UT,
         tt_isdst  tells whether tm_isdst should be set by localtime(3) and tt_desigidx serves as
         an index into the  array  of  time  zone  abbreviation  bytes  that  follow  the  ttinfo
         structure(s)  in  the  file.  The tt_utoff value is never equal to -2**31, to let 32-bit
         clients negate it without overflow.  Also, in realistic applications tt_utoff is in  the
         range  [-89999,  93599]  (i.e., more than -25 hours and less than 26 hours); this allows
         easy  support  by  implementations  that  already  support  the   POSIX-required   range
         [-24:59:59, 25:59:59].

       * tzh_leapcnt pairs of four-byte values, written in network byte order; the first value of
         each pair gives the nonnegative time (as returned by time(2)) at  which  a  leap  second
         occurs; the second is a signed integer specifying the total number of leap seconds to be
         applied during the time period starting at the given time.   The  pairs  of  values  are
         sorted  in  ascending  order  by  time.   Each transition is for one leap second, either
         positive or negative; transitions always separated by at least 28 days minus 1 second.

       * tzh_ttisstdcnt standard/wall indicators, each stored as a one-byte  boolean;  they  tell
         whether the transition times associated with local time types were specified as standard
         time or local (wall clock) time.

       * tzh_ttisutcnt UT/local indicators, each stored as a one-byte boolean; they tell  whether
         the  transition  times  associated  with  local time types were specified as UT or local
         time.  If a UT/local indicator is set, the corresponding  standard/wall  indicator  must
         also be set.

       The  standard/wall  and  UT/local  indicators were designed for transforming a TZif file's
       transition times into transitions appropriate for another time zone specified via a POSIX-
       style  TZ  string that lacks rules.  For example, when TZ="EET-2EEST" and there is no TZif
       file "EET-2EEST", the idea was to adapt the transition times from a  TZif  file  with  the
       well-known  name  "posixrules"  that is present only for this purpose and is a copy of the
       file "Europe/Brussels", a file with a different UT offset.  POSIX does  not  specify  this
       obsolete  transformational  behavior, the default rules are installation-dependent, and no
       implementation is known to support  this  feature  for  timestamps  past  2037,  so  users
       desiring  (say) Greek time should instead specify TZ="Europe/Athens" for better historical
       coverage, falling  back  on  TZ="EET-2EEST,M3.5.0/3,M10.5.0/4"  if  POSIX  conformance  is
       required and older timestamps need not be handled accurately.

       The  localtime(3)  function normally uses the first ttinfo structure in the file if either
       tzh_timecnt is zero or the time argument is less than the first transition  time  recorded
       in the file.

NOTES

       This manual page documents <tzfile.h> in the glibc source archive, see timezone/tzfile.h.

       It  seems  that  timezone  uses  tzfile  internally,  but  glibc  refuses  to expose it to
       userspace.  This is most likely because the standardised functions  are  more  useful  and
       portable,  and  actually documented by glibc.  It may only be in glibc just to support the
       non-glibc-maintained timezone data (which is maintained by some other entity).

   Version 2 format
       For version-2-format timezone files, the above header and data are followed  by  a  second
       header  and data, identical in format except that eight bytes are used for each transition
       time or leap second time.  (Leap second counts  remain  four  bytes.)   After  the  second
       header  and  data comes a newline-enclosed, POSIX-TZ-environment-variable-style string for
       use in handling instants after the last transition time stored in  the  file  or  for  all
       instants  if  the  file  has  no  transitions.   The POSIX-style TZ string is empty (i.e.,
       nothing between the newlines) if there is no POSIX representation for such  instants.   If
       nonempty,  the  POSIX-style  TZ  string must agree with the local time type after the last
       transition time if  present  in  the  eight-byte  data;  for  example,  given  the  string
       “WET0WEST,M3.5.0,M10.5.0/3”  then  if  a last transition time is in July, the transition's
       local time type must specify a daylight-saving time abbreviated “WEST” that  is  one  hour
       east of UT.  Also, if there is at least one transition, time type 0 is associated with the
       time period from the indefinite past up to but not including the earliest transition time.

   Version 3 format
       For  version-3-format  timezone  files,  the  POSIX-TZ-style  string  may  use  two  minor
       extensions  to the POSIX TZ format, as described in newtzset(3).  First, the hours part of
       its transition times may be signed and range from -167 through 167 instead of  the  POSIX-
       required  unsigned  values  from  0  through  24.  Second, DST is in effect all year if it
       starts January 1 at 00:00 and ends December  31  at  24:00  plus  the  difference  between
       daylight saving and standard time.

   Interoperability considerations
       Future changes to the format may append more data.

       Version  1  files  are  considered  a  legacy format and should be avoided, as they do not
       support transition times after the year 2038.  Readers that only understand Version 1 must
       ignore any data that extends beyond the calculated end of the version 1 data block.

       Writers  should  generate  a  version  3  file  if  TZ  string extensions are necessary to
       accurately model transition times.  Otherwise, version 2 files should be generated.

       The sequence of time changes defined by the version 1 header and data block  should  be  a
       contiguous  subsequence  of  the  time  changes  defined by the version 2+ header and data
       block, and by the footer.  This guideline helps obsolescent version 1 readers  agree  with
       current  readers about timestamps within the contiguous subsequence.  It also lets writers
       not supporting obsolescent readers use a tzh_timecnt of zero in the version 1  data  block
       to save space.

       Time zone designations should consist of at least three (3) and no more than six (6) ASCII
       characters from the set of alphanumerics, “-”, and “+”.  This is  for  compatibility  with
       POSIX requirements for time zone abbreviations.

       When  reading  a  version 2 or 3 file, readers should ignore the version 1 header and data
       block except for the purpose of skipping over them.

       Readers should calculate the total lengths of the headers and data blocks and  check  that
       they all fit within the actual file size, as part of a validity check for the file.

   Common interoperability issues
       This  section  documents  common problems in reading or writing TZif files.  Most of these
       are problems in generating TZif files for use by older readers.  The goals of this section
       are:

       * to  help  TZif  writers  output  files that avoid common pitfalls in older or buggy TZif
         readers,

       * to help TZif readers avoid common pitfalls when reading files generated by  future  TZif
         writers, and

       * to  help  any future specification authors see what sort of problems arise when the TZif
         format is changed.

       When new versions of the TZif format have been defined, a design  goal  has  been  that  a
       reader  can  successfully use a TZif file even if the file is of a later TZif version than
       what the reader was designed for.   When  complete  compatibility  was  not  achieved,  an
       attempt  was made to limit glitches to rarely used timestamps, and to allow simple partial
       workarounds in writers designed to generate new-version data useful even for older-version
       readers.  This section attempts to document these compatibility issues and workarounds, as
       well as to document other common bugs in readers.

       Interoperability problems with TZif include the following:

       * Some readers examine only version 1 data.  As a partial workaround, a writer can  output
         as much version 1 data as possible.  However, a reader should ignore version 1 data, and
         should use version 2+ data even if the reader's native timestamps have only 32 bits.

       * Some readers designed for version 2 might mishandle timestamps after a version 3  file's
         last  transition,  because  they cannot parse extensions to POSIX in the TZ-like string.
         As a partial workaround, a writer can output more transitions than  necessary,  so  that
         only far-future timestamps are mishandled by version 2 readers.

       * Some readers designed for version 2 do not support permanent daylight saving time, e.g.,
         a TZ string “EST5EDT,0/0,J365/25” denoting permanent Eastern Daylight Time (-04).  As  a
         partial  workaround,  a writer can substitute standard time for the next time zone east,
         e.g., “AST4” for permanent Atlantic Standard Time (-04).

       * Some readers ignore the footer, and instead predict future timestamps from the time type
         of  the  last transition.  As a partial workaround, a writer can output more transitions
         than necessary.

       * Some readers do not use time type 0 for timestamps before the first transition, in  that
         they  infer a time type using a heuristic that does not always select time type 0.  As a
         partial workaround, a writer can output a dummy (no-op) first  transition  at  an  early
         time.

       * Some  readers  mishandle timestamps before the first transition that has a timestamp not
         less than -2**31.  Readers that support only 32-bit timestamps are  likely  to  be  more
         prone  to  this  problem, for example, when they process 64-bit transitions only some of
         which are representable in 32 bits.  As a partial workaround,  a  writer  can  output  a
         dummy transition at timestamp -2**31.

       * Some  readers  mishandle  a  transition if its timestamp has the minimum possible signed
         64-bit value.  Timestamps less than -2**59 are not recommended.

       * Some readers mishandle POSIX-style TZ strings that contain “<” or  “>”.   As  a  partial
         workaround,  a  writer can avoid using “<” or “>” for time zone abbreviations containing
         only alphabetic characters.

       * Many readers mishandle time zone abbreviations that contain non-ASCII characters.  These
         characters are not recommended.

       * Some  readers  may  mishandle  time zone abbreviations that contain fewer than 3 or more
         than 6 characters, or that contain ASCII characters other than alphanumerics,  “-”,  and
         “+”.  These abbreviations are not recommended.

       * Some  readers mishandle TZif files that specify daylight-saving time UT offsets that are
         less than the UT offsets for the corresponding standard  time.   These  readers  do  not
         support  locations  like  Ireland,  which  uses  the  equivalent  of the POSIX TZ string
         “IST-1GMT0,M10.5.0,M3.5.0/1”, observing standard time (IST, +01) in summer and  daylight
         saving time (GMT, +00) in winter.  As a partial workaround, a writer can output data for
         the equivalent of the POSIX TZ string “GMT0IST,M3.5.0/1,M10.5.0”, thus swapping standard
         and daylight saving time.  Although this workaround misidentifies which part of the year
         uses daylight saving time, it records UT offsets and time zone abbreviations correctly.

       Some interoperability problems are reader bugs that are listed here mostly as warnings  to
       developers of readers.

       * Some readers do not support negative timestamps.  Developers of distributed applications
         should keep this in mind if they need to deal with pre-1970 data.

       * Some readers mishandle timestamps before the first transition  that  has  a  nonnegative
         timestamp.   Readers that do not support negative timestamps are likely to be more prone
         to this problem.

       * Some readers mishandle time zone abbreviations like “-08”  that  contain  “+”,  “-”,  or
         digits.

       * Some  readers  mishandle UT offsets that are out of the traditional range of -12 through
         +12 hours, and so do not support locations like Kiritimati that are outside this range.

       * Some readers mishandle UT offsets in the range [-3599, -1] seconds from UT, because they
         integer-divide the offset by 3600 to get 0 and then display the hour part as “+00”.

       * Some readers mishandle UT offsets that are not a multiple of one hour, or of 15 minutes,
         or of 1 minute.

SEE ALSO

       time(2), localtime(3), tzset(3), tzselect(8), zdump(8), zic(8).

       Olson A, Eggert P, Murchison K. The  Time  Zone  Information  Format  (TZif).   2019  Feb.
       Internet RFC 8536 ⟨https://www.rfc-editor.org/info/rfc8536⟩ doi:10.17487/RFC8536 ⟨https://
       doi.org/10.17487/RFC8536⟩.