Provided by: inn2_2.7.2~20230806-1_amd64 bug

NAME

       ctlinnd - Control the main InterNetNews daemon

SYNOPSIS

       ctlinnd [-hs] [-t timeout] [command [argument ...]]

DESCRIPTION

       ctlinnd sends a message to the control channel of innd(8), the main InterNetNews daemon.

       In the normal mode of behavior, the message is sent to the server, which then performs the
       requested action and sends back a reply with a text message and an exit code for ctlinnd.
       If the server successfully performed the command, ctlinnd will print the reply on standard
       output and exit with a status of zero.  If the server could not perform the command, it
       will direct ctlinnd to exit with a status of one.  By default, ctlinnd will wait forever
       for a response from innd; this can be changed with the -t flag.

       The "shutdown", "xabort", and "xexec" commands do not generate a reply, since they cause
       innd to exit.  After these commands, ctlinnd will always exit silently with a status of
       zero.

OPTIONS

       -h  Prints a command summary.  If a command is given along with the -h flag, only the
           usage for that command will be given.

       -s  If the command was successful, don't print the output from innd.

       -t timeout
           Specifies how long to wait for the reply from the server, for commands other than
           "shutdown", "xabort", and "xexec".  timeout is the number of seconds to wait.  A value
           of zero says to wait forever, and a value less than zero says not to wait at all but
           just exit immediately with status zero.  When waiting for a reply, ctlinnd will check
           every two minutes to be sure the server is still running, to make it less likely that
           ctlinnd will just hang.

           The default is zero, indicating that ctlinnd should wait forever.

COMMANDS

       Here is the complete list of supported commands.  Note that nearly all commands have a
       fixed number of arguments.  If a parameter may be an empty string, it is still necessary
       to pass the empty string to ctlinnd as an argument (specified in the shell as two adjacent
       quotes, like '').

       addhist message-id arrival expires posted token
           Add an entry to the history database for message-id.  The angle brackets around
           message-id are optional.  It should normally be protected from the shell with single
           quotes.

           arrival, expires, and posted should be the number of seconds since epoch and indicate
           when the article arrived, when it expires (via the Expires header field), and when it
           was posted (given in the Date header field), respectively.  expires should be 0 if the
           article doesn't have an Expires header field.  token is the storage API token for the
           article, and may be empty.

           This command can only be used while the server is running, and will be rejected if the
           server is paused or throttled.

       allow reason
           Allow remote connections, reversing a prior "reject" command.  reason must be the same
           text given to the "reject" command, or the empty string (which matches any reason).

       begin site
           Begin feeding site.  The server will rescan the newsfeeds file to find the specified
           site and set up a newsfeed for it.  If the site already existed, a "drop" for that
           site is done first.  This command is forwarded; see "NOTES" below.

       cancel message-id
           Remove the article with the specified message-ID from the local system.  This does not
           generate a cancel control message; it only affects the local system.  The angle
           brackets around message-ID are optional.  It should normally be protected from the
           shell with single quotes (and not double quotes).  For instance:

               ctlinnd cancel 'test@foo.bar'

           Note that the history database is updated with the specified Message-ID so if an
           article with the same Message-ID is afterwards received, it will be rejected; it is
           useful for rejecting spam before it arrives.

           If the server is throttled manually, this command causes it to briefly open the
           history database.  If the server is paused or throttled for any other reason, this
           command is rejected.

       changegroup group status
           The newsgroup group is changed so that its status (the fourth field in the active
           file) becomes status.  This may be used to make an existing group moderated or
           unmoderated, for example.

           This command, unlike "newgroup" or "rmgroup", can only be used while the server is
           running, and will be rejected if the server is paused or throttled.

       checkfile
           Check the syntax of the newsfeeds file and display a message if any errors are found.
           The details of the errors are reported to syslog.

       drop site
           Flush and drop site from the server's list of active feeds.  This command is
           forwarded; see "NOTES" below.

       feedinfo site
           Print detailed information about the state of the feed to site, or brief status about
           all feeds if site is the empty string.

       flush site
           Flush the buffer for the specified site.  The action taken depends on the type of feed
           the site receives; see newsfeeds(5) for more information.  This is useful when the
           site is being fed by a file and batching is about to start, or to cleanly shut down
           and respawn a channel feed.  If site is an empty string, all sites are flushed and the
           active file and history database are also flushed to disk.  This command is forwarded;
           see "NOTES" below.

           Flushing the innfeed channel feed is the recommended method of restarting innfeed to
           pick up new configuration.  innd will spawn a new innfeed process while the old
           process shuts down cleanly.

       flushlogs
           Close the news and error log files and rename them to add ".old" to the file name,
           then open fresh news and error logs.  The active file and history database are also
           flushed to disk.  Exploder and process channels are reopened so that they properly
           take into account the new log files.

       go reason
           Re-open the history database and start accepting articles again, reversing a previous
           "pause" or "throttle" command.  reason must be either the empty string or match the
           text that was given to the earlier "pause" or "throttle" command.

           If a "reject" command is in effect, this will also reverse it by doing the equivalent
           of an "allow" command if the reason matches reason.  Likewise, if a "reserve" command
           had been given, this will clear the reservation if reason matches the text that was
           given to "reserve".

           The history database is automatically closed on "throttle" or "pause" and reopened on
           "go", so the history database can be replaced during the pause or throttle without
           requiring an explicit "reload" command.  If any other configuration files or the
           active file were modified, a "reload" command should be given to force the server to
           re-read those files.

           If the server throttled itself because it accumulated too many I/O errors, this
           command will reset the error count.

           If innd was not started with the -n y flag, this command also does the equivalent of a
           "readers" command with "yes" as the flag and reason as the text.

       hangup channel
           Close the socket for the specified incoming channel.  This may be useful when an
           incoming connection appears to be hung (although innd will close idle connections
           automatically after a timeout, as set with peertimeout in inn.conf).

       help [command]
           Print a command summary for all commands, or just command if one is specified.  This
           is equivalent to the -h option.

       kill signal site
           Signal signal is sent to the process underlying the specified site, which must be a
           channel or exploder feed.  signal may be a numeric signal number or one of "hup",
           "int", or "term"; case is not significant.

       logmode
           Cause the server to log its current operating mode to syslog.

       lowmark file
           Reset the low water marks in the active file based on the contents of file.  Each line
           in file must be of the form:

               group low-value

           For example:

               comp.lang.c++ 243

           This command is mostly used by news.daily to update the active file after nightly
           expiration.

       mode
           Print the server's operating mode as a multi-line summary of the parameters and the
           operating state.  The parameters in the output correspond to command-line flags to
           innd and give the current settings of those parameters that can be overridden by
           command-line flags.

       name channel
           Print the name and relevant information for the given incoming or outgoing channel
           number, or for all channels if channel is an empty string.  The response is formatted
           as:

               <name>:<number>:<type>:<idle>:<status>

           where <name> is the name of the channel, <number> is its number (generally the same as
           the file descriptor assigned to it), <idle> is the idle time for an NNTP channel or
           the process ID for a process channel, and <status> is the status for NNTP channels.

           The <type> field is one of the following values:

               control     Control channel for ctlinnd
               file        An outgoing file feed
               localconn   Local channel used by nnrpd and rnews for posting
               nntp        NNTP channel for remote connections
               proc        The process for a process feed
               remconn     The channel that accepts new remote connections

           Channel status indicates whether the channel is paused or not.  Nothing is shown
           unless the channel is paused, in which case "paused" is shown.  A channel will be
           paused automatically if the number of remote connections for that label in
           incoming.conf is greater than max-connections within hold-time seconds.

       newgroup group [status [creator]]
           Create the specified newsgroup.  The status parameter is the fourth field of the
           active file entry, as described in active(5).  If it is not an equal sign, only the
           first character is used.  creator should be the identity of the person creating the
           group.  If the newsgroup already exists, this is equivalent to the "changegroup"
           command.

           creator, encoded in UTF-8 if given, may be omitted; if so, it will default to the
           newsmaster (as specified at configure time, normally "usenet").  status may also be
           omitted; if so, it will default to "y" (a normal, unmoderated group).  The combination
           of defaults make it possible to use the text of the Control header field directly
           (although don't do this without checking the syntactic validity of the header field
           first).

           This command can only be done while the server is running or throttled manually.  It
           will update its internal state when a "go" command is sent.  This command updates the
           active.times file as well.  This command is forwarded; see "NOTES" below.

       param letter value
           Change the specified server parameter.  letter is the innd command-line option to set
           and value is the new value.  For example:

               ctlinnd param i 5

           would direct the server to allow only five incoming connections.  To enable or disable
           the action of the -n flag, use "n" for the letter and "y" or "n", respectively, for
           the value.

           The supported values for letter are "a", "c", "H", "i", "l", "n", "o", "T", "t", and
           "X".

       pause reason
           Pause the server so that no incoming articles are accepted.  No existing connections
           are closed, but the history database is closed.  This should be used for short-term
           locks, such as when replacing the history database.  If the server was not started
           with the -n y flag, this command also does the equivalent of a "readers" command with
           "no" as the flag and reason as the text, encoded in UTF-8.

       perl flag
           Enable or disable Perl filtering on every article received by innd.  This command is
           only available if INN was built with Perl filtering support.  If flag starts with "y",
           filtering is enabled; if it starts with "n", filtering is disabled.

           When filtering is disabled, if the filter_innd.pl Perl filter defined a function
           "filter_end", it will be called prior to the deactivation of the filter.

           Note that enabling or disabling Perl filtering on every post received by nnrpd is
           parameterized with the perlfilter access parameter in readers.conf.

       python flag
           Enable or disable Python filtering on every article received by innd.  This command is
           only available if INN was built with Python filtering support.  If flag starts with
           "y", filtering is enabled; if it starts with "n", filtering is disabled.

       readers flag text
           Allow or disallow readers.  If flag starts with the letter "n", then reading is
           disallowed by causing the server to pass text as the value of the -r flag to nnrpd.
           If flag starts with the letter "y" and text is either an empty string or the same
           string, encoded in UTF-8, that was used when reading was disabled, reading will be re-
           enabled.

           The advantage of this parameter over noreader in inn.conf is that it permits
           specifying a custom message.

           This command has no effect if nnrpd is being run separately rather than spawned by
           innd.

       reject reason
           Remote connections (those that would not be handed off to nnrpd) are rejected with
           reason given as the explanation, encoded in UTF-8.  Existing connections are not
           closed.

       reload what reason
           Update the in-memory copy of server configuration files.  what identifies what should
           be reloaded, and reason is reported to syslog in the message noting the reload.

           There is no way to reload inn.conf, storage.conf, or other configuration files for the
           storage or overview backends.  To pick up changes to those files, use "ctlinnd xexec
           innd" to restart innd.

           If what is the empty string or the word "all", everything is reloaded.  If it is the
           word "history", the history database is closed and re-opened.  If it is the word
           "incoming.conf", the corresponding file is reloaded.  If it is the word "active" or
           "newsfeeds", both the active and newsfeeds files are reloaded, which will also cause
           all outgoing feeds to be flushed and restarted.

           If what is the word "filter.perl", the filter_innd.pl file is reloaded.  (This file is
           however not available for reloading unless INN was compiled with Perl filtering
           support.)  If the Perl filter defined a function "filter_before_reload", it will be
           called prior to re-reading filter_innd.pl.  If the Perl function "filter_after_reload"
           is defined, it will be called after filter_innd.pl has been reloaded.  Reloading the
           Perl filter does not enable filtering if it has been disabled; use "perl y" to do this
           instead.  startup_innd.pl cannot be reloaded.

           If what is the word "filter.python", the filter_innd.py file is reloaded.  (This file
           is however not available for reloading unless INN was compiled with Python filtering
           support.)  If a Python method named "filter_before_reload" exists, it will be called
           prior to re-reading filter_innd.py.  If a Python method named "__init__" exists, it
           will be called after filter_innd.py has been reloaded.  Reloading the Python filter
           does not enable filtering if it has been disabled; use "python y" to do this.

       renumber group
           Update the low water and high water marks for group in the active file based on the
           information in the overview database.  Regardless of the contents of the overview
           database, the high water mark will not be decreased.  (Decreasing it may cause
           duplicate article numbers to be assigned after a crash, which can cause serious
           problems with the tradspool storage method.)  If group is the empty string, all
           newsgroups are renumbered.  Renumber only works if overview data has been created (if
           enableoverview is set to true in inn.conf).

       renumberlow file
           Identical to the "lowmark" command.

       reserve reason
           Require the next "pause" or "throttle" command to use reason as its reason, encoded in
           UTF-8.  This reservation is cleared by giving an empty string for the reason.  This is
           used by programs like expire to coordinate pauses and throttles of the server and
           avoid trampling on other instances of themselves.

       rmgroup group
           Remove the specified newsgroup.  The group is removed from the active file and its
           overview information is purged, making it immediately unavailable to readers.  Unlike
           the "newgroup" command, this command does not update the active.times file.

           This command can only be done while the server is running or throttled manually.  This
           command is forwarded; see "NOTES" below.

       send feed text
           The specified text is sent as a control line to the exploder feed.

       shutdown reason
           The server is shut down, with the specified reason recorded in the log and sent to all
           open connections.  It is a good idea to send a "throttle" command first so that feeds
           can be shut down more gracefully.

           If Perl or Python filtering is compiled in and enabled, certain functions are called
           at "throttle" or "shutdown" (to save filter state to disk, for example).  Consult the
           embedded filter documentation for details.

       stathist (off | filename)
           Enable or disable generation of history performance statistics.  If the parameter is
           "off", no statistics are gathered.  Otherwise, statistics are written to the specified
           file.  A parser for this file is provided in the contrib tree of the INN distribution.
           See stathist in inn.conf(5) for information on how to set the default.

       status (off | interval)
           Adjust the frequency with which innd reports status information to syslog.  Status
           reporting is turned off if "off" or 0 is given as the argument.  Otherwise, status
           will be reported every interval seconds.  See status in inn.conf(5) for information on
           how to set the default.

       throttle reason
           Close all existing incoming connections and outgoing feeds, and reject new
           connections.  Close the history database.  This should be used for long-term locks or
           for running a large number of "newgroup" and "rmgroup" commands without restarting all
           outgoing feeds between each one.  (Note that changing the status of existing
           newsgroups when the server is throttled cannot be done.)

           If the server was not started with the -n y flag, then this command also does the
           equivalent of a "readers" command with "no" as the flag and reason as the text,
           encoded in UTF-8.

       timer (off | interval)
           Adjust the frequency with which innd reports performance information to syslog.
           Performance monitoring is turned off if "off" or 0 is given as the argument.
           Otherwise, statistics will be reported every interval seconds to syslog.  See timer in
           inn.conf(5) for information on how to set the default.

       trace item flag
           Turn tracing on or off for the specified item.  flag should start with the letter "y"
           or "n" to turn tracing on or off, respectively.  If item starts with a number, tracing
           is set up for the specified innd channel, which must be an incoming NNTP feed.  If it
           starts with the letter "i", general innd tracing is turned on or off.  If it starts
           with the letter "n", future nnrpd processes spawned by "innd" will or will not be
           passed the -t flag, as appropriate.  This will not affect any nnrpd processes already
           running, or nnrpd processes started by some means other than innd.

       xabort reason
           Log the specified reason and then abort.  On most systems, this will cause innd to
           dump a core file.  This is only useful for debugging.

       xexec path
           Shut down the server, but then rather than exiting, exec innd with all of its original
           arguments except for -r.  path may be either "innd" or an empty string, both of which
           are equivalent.  Any other value is an error.

           This is the easiest way to start a new copy of innd after upgrading or reload
           configuration files that can't be reloaded via the "reload" command.

NOTES

       In addition to being acted on by the server, certain commands can be forwarded to an
       appropriate child process.  If the site receiving the command is an exploder (such as
       buffchan) or a funnel that feeds into an exploder, the command can be forwarded.  In this
       case, the server will send a command line to the exploder that consists of the ctlinnd
       command name.  If the site funnels into an exploder that has an asterisk ("*") in its "W"
       flag (see newsfeeds(5) for more information on feed specifications), the site name will be
       appended to the command; otherwise, no argument is appended.

BUGS

       ctlinnd uses Unix domain sockets on most systems to communicate with innd and is therefore
       limited by whatever maximum packet size the operating system imposes on Unix domain
       datagrams.  This may mean that server replies are limited to 4 KB on some systems.

HISTORY

       Written by Rich $alz <rsalz@uunet.uu.net> for InterNetNews.  Rewritten in POD by Russ
       Allbery <eagle@eyrie.org>.

SEE ALSO

       active(5), active.times(5), buffchan(8), incoming.conf(5), innd(8), inn.conf(5),
       libinn_inndcomm(3), newsfeeds(5), nnrpd(8).