Provided by: dlm-controld_4.2.0-3_amd64 bug

NAME

       dlm_tool - a utility for the dlm and dlm_controld daemon

SYNOPSIS

       dlm_tool [COMMAND] [OPTIONS] [ name ]

COMMANDS

       ls
            Display dlm_controld internal lockspace state.

       status
            Dump dlm_controld daemon state.

       dump
            Dump dlm_controld debug buffer.

       dump_config
            Dump dlm_controld config settings.

       reload_config
            Reload dlm_controld config settings from dlm.conf.

       set_config setting=value
            Set dlm_controld config settings in the currently running daemon.

       fence_ack nodeid
            Cancel a waiting fencing operation and consider it successful.

       log_plock
            Dump dlm_controld plock debug buffer.

       plocks lockspace_name
            Dump posix locks from dlm_controld for the lockspace.

       join lockspace_name
            Join a lockspace.

       leave lockspace_name
            Leave a lockspace.

       joinleave lockspace_name
            Join then immediately leave a lockspace (for testing only.)

       lockdebug lockspace_name
            Complete display of locks from the lockspace.

       lockdump lockspace_name
            Minimal display of locks from the lockspace (deprecated).

       run command
            Run command and check for result (for lvmlockd only.)

       run_start command
            Run command and don't check for result.

       run_check uuid
            Check status of a command that was run.

       run_cancel uuid
            Cancel a command that was run and is not yet done.

       run_list
            Dump a list of running commands.

OPTIONS

       -n Show all node information from dlm_tool ls.

       -d 0|1 Resource directory off/on in join, default 0

       -e 0|1 Exclusive create off/on in join, default 0

       -f 0|1 FS (filesystem) flag off/on in join, default 0

       -i sec Seconds to wait in run_check.

       -m mode Permission mode for lockspace device (octal), default 0600

       -s Summary following lockdebug output (experiemental)

       -v Verbose lockdebug or status output

       -w Wide lockdebug output

       -M Include MSTCPY locks in lockdump output

       -h Print help, then exit

       -V Print program version information, then exit

USAGE

   fence_ack
       See  dlm_tool  status  for  information  about  waiting  fencing  operations  for specific
       nodeid's.

   set_config
       dlm_tool  set_config  can  change  certain  config  settings  in  the  currently   running
       dlm_controld.  Supported options:

       daemon_debug
       log_debug
       debug_logfile
       plock_debug
       plock_rate_limit
       drop_resources_time
       drop_resources_count
       drop_resources_age
       post_join_delay
       enable_quorum_fencing
       enable_quorum_lockspace
       repeat_failed_fencing

       Special cases to revert a previous set_config and restore the previous value (from default
       or dlm.conf):

       dlm_tool set_config setting=restore
       restores a single setting.

       dlm_tool set_config restore_all
       restores all settings.

   dump_config
       A config setting may have been set from:  the  default,  the  dlm_controld  command  line,
       dlm.conf  at  startup,  dlm.conf from reload_config, dlm_tool set_config.  The dump_config
       output indicates how values were set:

       setting=value
              default value.

       setting=value (cli option)
              Set from a dlm_controld command line option.

       setting=value (dlm.conf)
              Set from dlm.conf (at startup or reload.)

       setting=value (set_config)
              Set from dlm_tool set_config.

EXAMPLES

   dump_config
       $ dlm_tool dump_config | head -n 5
       daemon_debug=1 (set_config)
       foreground=0
       log_debug=1 (dlm.conf)
       protocol=detect

       In this case,  daemon_debug  is  set  by  set_config,  log_debug  is  set  from  dlm.conf,
       foreground and protocol are using default values.

   set_config
       $ dlm_tool dump_config | grep log_debug
       log_debug=1 (dlm.conf)

       $ dlm_tool set_config "log_debug=0"
       set_config done

       $ dlm_tool dump_config | grep log_debug
       log_debug=0 (set_config)

       $ dlm_tool set_config "log_debug=restore"
       set_config done

       $ dlm_tool dump_config | grep log_debug
       log_debug=1 (dlm.conf)

       log_debug  is  set  by dlm.conf (value is 1), then run set_config to change to 0, then use
       restore to restore to dlm.conf setting.

   set_config
       $ dlm_tool dump_config | grep _debug
       daemon_debug=0
       log_debug=1 (dlm.conf)
       plock_debug=0

       $ dlm_tool set_config "daemon_debug=1 log_debug=1 plock_debug=1"
       set_config done

       $ dlm_tool dump_config | grep _debug
       daemon_debug=1 (set_config)
       log_debug=1 (set_config)
       plock_debug=1 (set_config)

       $ dlm_tool set_config "restore_all"
       set_config done

       $ dlm_tool dump_config | grep _debug
       daemon_debug=0
       log_debug=1 (dlm.conf)
       plock_debug=0

SEE ALSO

       dlm_controld(8), dlm.conf(5)