Provided by: linuxcnc-uspace_2.9.0~pre1+git20230208.f1270d6ed7-1_amd64 bug

NAME

       multiclick - Single-, double-, triple-, and quadruple-click detector

SYNOPSIS

       loadrt multiclick [count=N|names=name1[,name2...]]

DESCRIPTION

       A  click  is defined as a rising edge on the 'in' pin, followed by the 'in' pin being True
       for at most 'max-hold-ns' nanoseconds, followed by a falling edge.

       A double-click is defined as two clicks, separated by at most  'max-space-ns'  nanoseconds
       with the 'in' pin in the False state.

       I bet you can guess the definition of triple- and quadruple-click.

       You  probably  want to run the input signal through a debounce component before feeding it
       to the multiclick detector, if the input is at all noisy.

       The '*-click' pins go high as soon as the input detects the correct number of clicks.

       The '*-click-only' pins go high a short while after the click, after the  click  separator
       space  timeout  has  expired  to show that no further click is coming.  This is useful for
       triggering halui MDI commands.

FUNCTIONS

       multiclick.N
              Detect single-, double-, triple-, and quadruple-clicks

PINS

       multiclick.N.in bit in
              The input line, this is where we look for clicks.

       multiclick.N.single-click bit out
              Goes high briefly when a single-click is detected on the 'in' pin.

       multiclick.N.single-click-only bit out
              Goes high briefly when a single-click is detected on the 'in'  pin  and  no  second
              click followed it.

       multiclick.N.double-click bit out
              Goes high briefly when a double-click is detected on the 'in' pin.

       multiclick.N.double-click-only bit out
              Goes  high  briefly  when  a  double-click is detected on the 'in' pin and no third
              click followed it.

       multiclick.N.triple-click bit out
              Goes high briefly when a triple-click is detected on the 'in' pin.

       multiclick.N.triple-click-only bit out
              Goes high briefly when a triple-click is detected on the 'in'  pin  and  no  fourth
              click followed it.

       multiclick.N.quadruple-click bit out
              Goes high briefly when a quadruple-click is detected on the 'in' pin.

       multiclick.N.quadruple-click-only bit out
              Goes  high  briefly when a quadruple-click is detected on the 'in' pin and no fifth
              click followed it.

       multiclick.N.state s32 out

PARAMETERS

       multiclick.N.invert-input bit rw (default: FALSE)
              If FALSE (the default), clicks start with rising edges.  If TRUE, clicks start with
              falling edges.

       multiclick.N.max-hold-ns u32 rw (default: 250000000)
              If  the  input  is  held  down  longer  than  this, it's not part of a multi-click.
              (Default 250,000,000 ns, 250 ms.)

       multiclick.N.max-space-ns u32 rw (default: 250000000)
              If the input is released  longer  than  this,  it's  not  part  of  a  multi-click.
              (Default 250,000,000 ns, 250 ms.)

       multiclick.N.output-hold-ns u32 rw (default: 100000000)
              Positive  pulses  on  the output pins last this long.  (Default 100,000,000 ns, 100
              ms.)

AUTHOR

       Sebastian Kuzminsky

LICENSE

       GPL